[Q] Easiest ROM to get on Captivate? - Captivate Q&A, Help & Troubleshooting

So guys, I need to know what the easiest ROM to put on my Captivate is. I'm rooted on the stock Froyo and I'm coming from the Aria where it was really easy. But, a couple days ago I bricked my Captivate and now have new one. And coming form the Aria I never had to worry about download mode (which I still don't quite understand) and bootloaders and Odin3 (which doesn't register my phone when my phone is in download mode, however, it registers it when out of download mode). So I need a good ROM that all I have to do is boot into CWM and install from SD card because thats all I understand as I have been doing that on my Aria. Please help me find the perfect ROM. Thanks so much. Love you guys here at XDA!

If you already have CWM, all you have to do is boot into recovery and choose install zip from SD card. This will work with any FroYo ROM.
If you don't have CWM you need to mod your recovery before you do anything.
You should be able to mod your 3e recovery from your computer, check the stickies for 3e recovery Modding, its really easy, and caries no risk of bricking.
Then, using modded 3e recovery you can flash CWM with an update.zip then flash a ROM.
Or, rename ANY froyo ROM "update.zip" and flash it directly from your modded 3e recovery. I recommend FireFly or Cognition personally.
Sent from my Captivate running Continuum 5.5

Yes, every Froyo ROM'S can be flashed with ClockWork Mod Recovery, you can download ROM MANAGER from market and you just touch "Flash clockwork mod" and then you have it, put the .zip files in your internal SD, and flash them using CWM.......

caddi234 said:
Yes, every Froyo ROM'S can be flashed with ClockWork Mod Recovery, you can download ROM MANAGER from market and you just touch "Flash clockwork mod" and then you have it, put the .zip files in your internal SD, and flash them using CWM.......
Click to expand...
Click to collapse
That is one way to obtain the CWM install file. But you still need to mod the 3e recovery before you can install the CWM recovery. Otherwise when you try to install it you will get the signature verification failure.
Sent from my Captivate running Continuum 5.5

how do I mod 3e recovery? Whenever I use cwm to reinstall packages, it says full signature verification failure. Or something close.
Sent from my SAMSUNG-SGH-I897 using XDA App

argonarcel said:
how do I mod 3e recovery? Whenever I use cwm to reinstall packages, it says full signature verification failure. Or something close.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Do some reading. Search for 3e recovery. There are a lot of threads on it.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

go to the general sub-forum and look at the stickies at the top. There is a whole sticky dedicated to 3e recovery.

Ok. Thanks!
Sent from my SAMSUNG-SGH-I897 using XDA App

Related

CWM wont go to recovery

I cant seem to get CWM to go into recovery mode....i clicked both reboot into recovery and install zip from sd and they both only take me to the stock recovery...can anyone help ?
Sent from my SAMSUNG-SGH-I897 using XDA App
iamcombat said:
I cant seem to get CWM to go into recovery mode....i clicked both reboot into recovery and install zip from sd and they both only take me to the stock recovery...can anyone help ?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
doubleudoubleudoubleudotmultiuploaddotcom/1YX01GN2SN
rename this to update.zip
place on internal sd card
reboot into recovery
press reinstall packages
then reinstall packages again. should work for you.
Well since you only have 3 posts I think ill wait to see if anyone else chimes in...don't want to do anything to my phone that would brick it
Sent from my SAMSUNG-SGH-I897 using XDA App
iamcombat said:
Well since you only have 3 posts I think ill wait to see if anyone else chimes in...don't want to do anything to my phone that would brick it
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Better safe than sorry, I just started contributing after quite some time now so I do not blame you one bit.
However...
That link is the CWM recovery for 2e bootloaders.
What ROM are you using?
You can always get ODIN 1.82 and flash an optimized kernel like hardcore's speedmod K9A which already has CWM.
EDIT: haha or you could just ODIN one-click to stock, root, and go CW Rom manager and from there flash recovery. I know that will work 100%, but that link is just a shortcut through all that nonsense.
Just flash clockworkmod recovery.
I had this problem the other day when I was trying to flash a new rom. I tried flashing CWM many times to no avail.
Like one of the previous repliers said, I flashed the speedmod kernel which had CWM already. The kernel can be found here.
Use Odin to flash it. After that, i could boot manually to CWM, but when i tried to boot to it through rom manager i was pushed to the stock recovery. In that case, I simply flashed my rom manually with CWM.
Theres also a good video on this for the i9000 which worked for me:http://www.youtube.com/watch?v=Q7xV0yE9ZcA
Hope this helps.

My non-rooted captivate

Can I get custom roms not being rooted
Sent from my SAMSUNG-SGH-I897 using XDA App
jmoles13 said:
Can I get custom roms not being rooted
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
If you can get in to download mode, then you can use Odin or Hemidall. Most roms will root you automatically.
Not really. Not many roms are odin/heimdall. You need to root and install cwm to be able to install a custom rom
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
sepherian said:
Not really. Not many roms are odin/heimdall. You need to root and install cwm to be able to install a custom rom
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
no you dont.
if you are on 3e recovery, then you just need to flash a kernel via ODIN that has CWM built in
CWM has nothing to do with root. on galaxy S devices it just creates an update.zip file
Rooting your stock ROM is actually not required to install a custom ROM, depending on which ROM you are installing. For some, all you would need to do is place the Clockworkmod update zip on you internal sd, along with the rom you want to install, then boot into CWM using 3-button combo, reinstall packages twice, install zip from sd and that should be it.
However, there are some details that you may encounter such as:
If you are on stock 2.2 you have to get around 3e recovery which wont allow you into CWM recovery without a hack. Or you can flash back to stock 2.1 to avoid this problem entirely (using ODIN3 1 click, if you know how)
This simple install is really for custom Froyo 2.2 ROMS, which looks like what you should be doing anyway if you have to ask this question.
Just READ as much as you can before you do anything.
If you simply dont like the idea of having root privileges you can remove root after installing a custom rom. I have done this for my friends in the past so they dont go do anything stupid on accident. There is a 1-click root/unroot app floating around the forums for the galaxy S that has worked for me on all 2.1/2.2 roms but never attempted with gingerbread as I use root and haven't flashed a friends phone in a while.

[Q] General Question For Flashing Rom

I currently some how got the rooting onto my samsung capivate. It's fully rooted just without clockwork recovery mod. When ever i try to flash it on the device it says successful but when i reboot into recovery it just show me the same recovery as before it was even rooted.
So my question is when flashing a custom rom on the device do i have to use odin or can i use clockwork recovery directly?
Thank and much appreciated.
If you have recovery 2e you can simply install clockwork mod. If you have recovery 3e install a kernel that has clockwork mod built in using Odin. From then on you won't need Odin to flash a custom ROM. Simply use the install from zip option in clockwork.
Sent from my SGH-I897 using XDA App
Flash the update.zip twice. Since you don't have signature verification error, I an going to assume you are on 2.1. You have to flash the update.zip, then flash it again. Then you should see cwm.
mrhaley30705 said:
Flash the update.zip twice. Since you don't have signature verification error, I an going to assume you are on 2.1. You have to flash the update.zip, then flash it again. Then you should see cwm.
Click to expand...
Click to collapse
+1 took reinstalling packages 2x while flashing the CWM update.zip back when I first did it
+ 10 when I first flashed I had to select reinstall package like 3 or 4 times.
Sent from my SGH-I897 using XDA App

Can't get Clockwork Recovery flashed on my T959

Ok, I have ROM Manager premium installed, rooted, etc. I'm running 2.2 version UVKB5 on my T Mobile Samsung Vibrant.
I've selected the option to Flash ClockworkMod Recovery for the "Samsung Vibrant" and it won't boot to CWR. If I select reintall packages, it fails every time.
Help!
did you install both the free and premium version of rom manager?
kcfried said:
Ok, I have ROM Manager premium installed, rooted, etc. I'm running 2.2 version UVKB5 on my T Mobile Samsung Vibrant.
I've selected the option to Flash ClockworkMod Recovery for the "Samsung Vibrant" and it won't boot to CWR. If I select reintall packages, it fails every time.
Help!
Click to expand...
Click to collapse
Make sure the "update.zip" file is on your Int SD card... power off your phone.
While holding down the Vol up+down, press and hold all 3 buttons till the "Samsung/Vibrant splash screen pops up.
You should boot into stock recovery, use vol up and down to move up and down and choose "reinstall update" with power... it should reboot and bring you right back to where you were... repeat choose "reinstall update" with power... now you should boot into CWM recoery.
I think the problem is that you have the new recovery (3e I think) that requires signed update.zip files. I'd recommend using Odin3 to flash another kernel which will come with CWM. If you don't want to do that, there is a guide somewhere on xda to allow 3e recovery to flash unsigned update.zip files.
Sent from my T959 using XDA App
phantomsniper773 said:
I think the problem is that you have the new recovery (3e I think) that requires signed update.zip files. I'd recommend using Odin3 to flash another kernel which will come with CWM. If you don't want to do that, there is a guide somewhere on xda to allow 3e recovery to flash unsigned update.zip files.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Exactly clockwork will not install with 3e recovery. Either flash a new kernel or do the 3e mod recovery. Odin will take 1 min to complete its process of flashing a kernel, you should definitely do this. Or just go back to stock and start your flashing journey from there.
aeok18109 said:
did you install both the free and premium version of rom manager?
Click to expand...
Click to collapse
Yup, I installed ROM Manager, then bought the premium key. I've got all functionality available to me.
Only problem is that when it flashes the recovery, nothing happens. If I reboot to recovery, it says the update.zip has an invalid signature. It seems nothing works. Am I supposed to flash back to droid 2.1 to get this thing working? It seems like it should be easier than this....
ferhanmm said:
Exactly clockwork will not install with 3e recovery. Either flash a new kernel or do the 3e mod recovery. Odin will take 1 min to complete its process of flashing a kernel, you should definitely do this. Or just go back to stock and start your flashing journey from there.
Click to expand...
Click to collapse
Thanks for the info. Any suggestions on kernels to use and a link for more info on what specifically a kernel is/does? Last thing I want to do is brick this puppy
Update...
Ok, did a little google-fu and found some links. I am using 3e, so ODIN it is! Thanks for the nudge int he right direction - wish me luck!
you can download this and used it to flash back to stock http://forum.xda-developers.com/showthread.php?t=954509 .and root and then try rom manger again this work for me all the time.
phantomsniper773 said:
I think the problem is that you have the new recovery (3e I think) that requires signed update.zip files. I'd recommend using Odin3 to flash another kernel which will come with CWM. If you don't want to do that, there is a guide somewhere on xda to allow 3e recovery to flash unsigned update.zip files.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Richcar said:
you can download this and used it to flash back to stock http://forum.xda-developers.com/showthread.php?t=954509 .and root and then try rom manger again this work for me all the time.
Click to expand...
Click to collapse
Yes, you are correct... another solution is to Odin the KB5 kernel with Voodoo and Recovery, make sure nothing check in Odin - LINK
Richcar said:
you can download this and used it to flash back to stock http://forum.xda-developers.com/showthread.php?t=954509 .and root and then try rom manger again this work for me all the time.
Click to expand...
Click to collapse
Well ****. I got CWM on there, installed zip from SD card (latest Cyanogen for vibrant) and now the thing's in an infinite reboot loop. ARRRGH! What now?
kcfried said:
Well ****. I got CWM on there, installed zip from SD card (latest Cyanogen for vibrant) and now the thing's in an infinite reboot loop. ARRRGH! What now?
Click to expand...
Click to collapse
Cotton needs new shorts! In CWM recovery, I did another wipe/format, reinstalled the zip and BOOYAH, it's done!
Thanks VEYR much for everybody's help!
kcfried said:
Cotton needs new shorts! In CWM recovery, I did another wipe/format, reinstalled the zip and BOOYAH, it's done!
Thanks VEYR much for everybody's help!
Click to expand...
Click to collapse
Originally Posted by kcfried
Well ****. I got CWM on there, installed zip from SD card (latest Cyanogen for vibrant) and now the thing's in an infinite reboot loop. ARRRGH! What now?
Click to expand...
Click to collapse
If your running CyanogenMod, there no way around Odin'ing to get back to stock. CyanogenMod (CM7) changes the partitioning to MTD from Stock RFS/Ext4. Only way to get that back is to Odin back to stock.

ROM Manager / Clockwork Mod question

I'm trying to install clockwork mod on the wifes captivate. Unlike mine, she doesn't want a custom rom, actually she doesn't want me messing with it at all lol! Anyway it's rooted and I ran the 3e recovery fix script for Froyo as her's is 2.2.
So I install ROM Manager to install cwm, select Captivate and it says not supported on your device, manually install a recovery first and run again. Ok so where does one get a cwm file to manually install? I looked on the clockwork site and it has rom & recovery files listed but unknown if that's it and if it's even compatible with 2.2? Anyone have a clue on this? I've search multiple threads and haven't found one with this particular issue.
Search for "update.zip"
You need a clockwork enabled kernel. Then RomManager will be able to install CW.
Sent from my SAMSUNG-SGH-I897 using XDA App
98XJ said:
You need a clockwork enabled kernel. Then RomManager will be able to install CW.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
This is wrong.
To OP don't waste your time with Rom Manager. Flash a kernel with cwm baked in it (any i897 2.2 kernel should work) or as mrhaley30705 said update.zip.
prbassplayer said:
This is wrong.
To OP don't waste your time with Rom Manager. Flash a kernel with cwm baked in it (any i897 2.2 kernel should work) or as mrhaley30705 said update.zip.
Click to expand...
Click to collapse
what he said. flash any custom kernel, it has cwm built in. or do the update.zip method and make sure NEVER delete the file!!!!!!
but go with a custom kernel the have TONES of other cool options added. find one that is odin flashable and odin flash it...
here...
Odin3v1.85.zip
Onix kernel v2.0.5 made for android 2.2 search the forum for its thread to find all its options
boot phone into download mode (search)
plug in to computer
open odin
load the kernel into the PDA box.
press start
prbassplayer said:
This is wrong.
To OP don't waste your time with Rom Manager. Flash a kernel with cwm baked in it (any i897 2.2 kernel should work) or as mrhaley30705 said update.zip.
Click to expand...
Click to collapse
Curious how my statement is wrong? He asked why rom manager would not install clockwork and I told him. I said he needed a cwm compatible kernel, and you just repeated what I said except not to use rom manager?
Sent from my SAMSUNG-SGH-I897 using XDA App
98XJ said:
Curious how my statement is wrong? He asked why rom manager would not install clockwork and I told him. I said he needed a cwm compatible kernel, and you just repeated what I said except not to use rom manager?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
there is no CWM compatible kernel. all custom kernels have CWM baked in. ROM manager is useless
^That's why its wrong.
Ah ok, roger that. I fully understand it now. Thanks.
Sent from my SAMSUNG-SGH-I897 using XDA App
I rooted the phone, install rom manager, flash cwm recovery, then when i start recovery mode i don’t have install packages.Don’t know why, nevermind i install custom kernel and in there cwm recovery already.
szika87 said:
I rooted the phone, install rom manager, flash cwm recovery, then when i start recovery mode i don’t have install packages.Don’t know why, nevermind i install custom kernel and in there cwm recovery already.
Click to expand...
Click to collapse
holy christ. did you read this thread before replying to it?

Categories

Resources