Database Develop

[Q] Galaxy S ROM + Lag fix

Hi guys,
I have the Galaxy S on T-Mobile and have come to the conclusion T-Mobile will never release the 2.2 Froyo update - I'm looking to root it instead and put on one of the lag-fix's.
Can you guys recommend me the best guides for the following :-
Rooting the Galaxy S
Updating firmware to 2.2
Lag-Fix
Thanks in advance,
Gav

gavk-xda said:
Hi guys,
I have the Galaxy S on T-Mobile and have come to the conclusion T-Mobile will never release the 2.2 Froyo update - I'm looking to root it instead and put on one of the lag-fix's.
Can you guys recommend me the best guides for the following :-
Rooting the Galaxy S
Updating firmware to 2.2
Lag-Fix
Thanks in advance,
Gav
Click to expand...
Click to collapse
If you really want 2.2, best options are:
Firmware JP6
Voodoo lagfix pre-3
CF Root
In my opinion anyway!
If you can live with 2.1, then JM9 or even JM8 with voodoo lagfix beta 5 is your best bet.
With both, I like Tatuyama's ROM, I find it the most stable. The only competition really is DocRambone.

and this has what todo with DEV?

Firmware JPA
CF Root
Voodoo lagfix pre-3
here is what i am using now

SpeedMod Kernel with Gingerbread

Hi Guys
I am upgrading to a SGS i9000. Previously had a Motorola Milestone, custom kernel is new to me.
I've been searching and couldn't find anything. I want to load gingerbread XXJVK and use SpeedMod Kernel. Will this cause any problems? If I do experience problems would it be straight forward to go back to stock kernel?

davekojo said:
Hi Guys
I am upgrading to a SGS i9000. Previously had a Motorola Milestone, custom kernel is new to me.
I've been searching and couldn't find anything. I want to load gingerbread XXJVK and use SpeedMod Kernel. Will this cause any problems? If I do experience problems would it be straight forward to go back to stock kernel?
Click to expand...
Click to collapse
Speedmod is a kernel designed to run with Froyo, not Gingerbread. Many custom 2.3.3 ROMs have you install Speedmod as an intermediary step just to get CWM installed, but it will not work with JVK. You will need to install one of the kernels specifically designed to support JVK.
I STRONGLY suggest you read the many threads posted here about JVK and the process of flashing to it, AFTER you have read the stickies about flashing ROMs on the i9000. Foreknowledge is always better than Support Calls.

rschenck said:
Speedmod is a kernel designed to run with Froyo, not Gingerbread. Many custom 2.3.3 ROMs have you install Speedmod as an intermediary step just to get CWM installed, but it will not work with JVK. You will need to install one of the kernels specifically designed to support JVK.
I STRONGLY suggest you read the many threads posted here about JVK and the process of flashing to it, AFTER you have read the stickies about flashing ROMs on the i9000. Foreknowledge is always better than Support Calls.
Click to expand...
Click to collapse
Thanks for the advice. I keep going back to the stickies about flashing ROMs to i9000. I guess I will keep reading.

I would wait for the release of Gingerbread . Once its released the devs are going to have a more complete set up to work with .
jje

There's no source to work from... so there's no speedmod as of now. Your best shot could be supercurio's hacked JVK kernel which can convert partitions to ext4. But remember, the rom is still a beta.

My SGS came today. I'm going to look at flashing darky's rom tonight.
I have Cyanogenmod7 RC3 on my milestone at the moment but I don't think I'll miss the 2.3 features.
Again thanks everyone for the advice

hi guys,
i'm a noob.
need some help over here.
i'm using galaxy S i9000.
i rooted my device with speedmod kernel k13e-500hz #36 but firmware is v2.2.
is theer anyway to upgarde to v2.3 with rooted kernel??
many thanks

[Q] Need some help badly please

hi to all ive just rooted my sgs using one click root (at last), i now have superuser installed and rom manager but how the hell do i install the clockwork recovery and hopefully then some type of free lag fix.
Can someone PLEASE PLEASE PLEASE help a noob at this.cheers.madant2011.

madant2011 said:
hi to all ive just rooted my sgs using one click root (at last), i now have superuser installed and rom manager but how the hell do i install the clockwork recovery and hopefully then some type of free lag fix.
Can someone PLEASE PLEASE PLEASE help a noob at this.cheers.madant2011.
Click to expand...
Click to collapse
What firmware do you have?
If gingerbread you can flash the voodoo kernal
http://forum.xda-developers.com/showthread.php?t=975349
This will give you clockwork and will give you an ext4 lagfix

Hopefully Done It Now
I've done it (finally i think),
my kernel version says:
2.6.32.9
[email protected] #Dark_Core_1.0
Build number is: Darky's v9.5.xwjs8
But as i switch the phone on it come up with Darky's v9.4 ?????
Hopefully i will get used to this, if you can could you please let me know if all the info above is right and whats the best rom for 2.2.1?????
Cheers Madant2011.

looks like you installed Darkys rom instead of what you wanted hehe....

rom
when i had rom manager i just downloaded what ever darky's rom that was on there.lol.
Just woundering what is the recomended rom for sgs 2.2.1 ?????
Cheers madant2011

The boot animation for darkys 9.5 does display 9.4 so don't worry about that. The darkys Rom is very good but you could upgrade your kernel to dark core 1.4 or use speedmod k13e kernel
Sent from my GT-I9000 using XDA App

kernel
Just wondering how do i update the kernel to 1.4, i already have voodoo speed mod (I Think).

download it from the darky rom site and if you get the cwm version, just flash it with your recovery

also visit http://forum.xda-developers.com/showthread.php?t=822756 for information on speedmod kernel, that is what i used when on 2.2.1, very fast and good batt life

Thanks
Thanks for all your help. just reading the link and it says it wont work because i used the one click root (I think).
Cheers madant2011

hi to all some questions regarding the tab....

Just got the 16GB Tab a few days ago...
Well after scouring the forums for all sorts of info, the amount of research done on the Tab by you people is amazing ........ and still searching for more info day by day....
I wish to know which version of gingerbread is the "most stable one" ??
The asian ones which have been recently released ? Or the latest european firmware ?
Because I wish to run a stock samsung's own GB version before straightaway going in for a custom ROM like Overcome...
Also if I want the closest stock ROM based experience should I go for -
[ROM/Kernel][GSM][Android 2.3.3] ROM based DXJPE (build 23 June) by DiP7 ???
ANother newbish question will be -
If I flash a ROM and install the provided kernel with it ? Do I need to also flash a new modem file via ODIN ? or the original file stays there ?
And do I need OCLF after installing a stock/custom GB based ROM just for some speed improvements and/or does the EXT2 file system conversion give boost ? (because OCLF in my Galaxy S SL i9003 really did make overall performance better) Also the lagfix to be applied is V1+ right ? or do I also go for applying V2 lagfix in OCLF?
Thanks for reading all this and I would love to hear your ideas over these questions ....

No , no need to for the modem file after flashing rom.
I see you are in India ( me too ) so Asian rom will be better .
No need of lagfix and oc overcome is very smooth .
P.S :If you flash Asian GB please tell whether it contains Indian languages .

A good stock GB rom choice is JQ1 because it has the proper, safe bootloaders, and can be easily rooted using the Chainfire CF-Root v3.3 kernel.
From there you can go in any direction.

rangercaptain said:
A good stock GB rom choice is JQ1 because it has the proper, safe bootloaders, and can be easily rooted using the Chainfire CF-Root v3.3 kernel.
From there you can go in any direction.
Click to expand...
Click to collapse
Thanks a lot for the info..... and with that after CF-root can I do the lag fix ? or there's no need ?

adi6262 said:
No , no need to for the modem file after flashing rom.
I see you are in India ( me too ) so Asian rom will be better .
No need of lagfix and oc overcome is very smooth .
P.S :If you flash Asian GB please tell whether it contains Indian languages .
Click to expand...
Click to collapse
Thanks a lot... I'll go with JQ1 for now... then overcome GB version and then probably some asian firmware...

[Q] Rooting and Installing ROM on GT I9000

Hi,
I finally got a Samsung Galaxy S after finding a great a deal on it. I'm aware that there are several ways on how to root this device. However, due to that I don't know which to use.
Currently I'm running on 2.2.1 Froyo XXJPY with Kernel Version of [email protected] #1.
I'm not totally clueless about rooting as I've done it already on my HTC Wildfire.
Could someone please advise me which is the most up-to-date and safest method of rooting? Link would be greatly appreciated.
Also, I'm a bit confused about installing ROMs. I used to use CWM on my HTC Wildfire which was incredebly easy to do. Would it be the same on my Galaxy S?
I'm planning to test out MIUI, DarkysROM and such ROMs. Would these ROMs have the LAGFIX feature integrated in them as well?
I apologise if a thread like this has already been posted a thousand times but I just can't come up with a definite answer.
Thanks in advance.

I have a galaxy s Vibrant the I9000M and I rooted and unlocked mine today using SuperOneCick and then The Galaxy s unlock by helroz on the app market took a grand total of 6 minutes

Thank you! Now, that's one down.
Now just want to know about flashing ROMs e.g. MIUI, DarkyROM and such.
Do I need to root my SGS first to be able to flash custom ROMs?
I also noticed that you would also have to flash firwares and kernels. Do I need to this before flashing custom ROMs?
Thanks in advance.

In order to flash a custom rom you need to have clockworkmod (CWM) recovery.
and from that its easy
As for the newer rom's here, they are all 2.3.x, so in order to get from 2.2.1 JPY, you will need to flash a stock rom 2.3.x with bootloaders via Odin.
use this link to read about odin and flashing with it. its a great guide
http://forum.xda-developers.com/showthread.php?t=723596
to find stock rom's - they are in the general section. and custom rom's in the dev section.
read a little and after that have fun!!
And keep in mind every rom has its little guide, read those before you flash any.

Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.

Code Geass said:
Hi,
Many thanks for replying. Can I follow the video below made by a fellow XDA member direct from 2.2.1 to 2.3.4 via Odin?
http://www.youtube.com/watch?v=6lO3Y86N2p0&feature=BFa&list=FLqhM0qK4aVsLmWAA_YYhBCA&lf=mh_lolz
So I will Download stock JVQ from Samfirmware > Download Odin > Flash a stock 2.3.4 JVQ > Install chosen Kernel with CWM > Flash chosen ROM using CWM.
When would I need root then?
Is that right?
This reminds me when I had my Samsung Tocco. Pretty much same procedures.
Click to expand...
Click to collapse
That is right... basically when you flash a kernel with CWM you get root access. it's one of the features of a custom kernel. some of them activate it on there own and in some you need to activate it your self from the recovery (very simple).
And all the custom rom's come with root access, so in following the steps you wrote, you will get the root access with the custom kernel, and again in the custom rom.

Thanks for everyone's help. I'm now running Armetris 3.6.1 with Semaphore Kernel.
Just a question though, with my phone rooted, lagfix enabled, flashed with custom ROM and such, can I just simply go back to stock ROM? e.g. JVQ/JVR using Odin without any problems?

It is suggested to disable lagfix before changing rom's and kernel's
I know some how would say it is not a must when you use odin, but i always disable it before doing changes. I like to keep it safe.

sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc

Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!

Code Geass said:
Hi,
Thanks for the reply. I'm currently running on Semaphore Kernel but I can't find any Lag Fix option on my phone? There isn't any on CWM Recovery as well.
I thought when you use EXT4 and convert it, Lag Fix would show up but I found nothing, so I just converted back to RFS.
So, I'm fine to directly go back to 2.3.4 JVQ even even I have a custom Kernel and custom ROM?
Thanks in advance!
Click to expand...
Click to collapse
If you used the EXT4 app and converted to RFS then you have disabled the lagfix.
The lagfix changes the filesystem from RFS to EXT4. so when you converted to RFS yoh disabled it.
So,yes you are good to go.
---------- Post added at 02:57 PM ---------- Previous post was at 02:55 PM ----------
pat da punk said:
sorry for this nooob question....
new to the samsung gt i9000, do i need to create a gold card before i do anything else????
sorry to be a bit thick but im used to htc
Click to expand...
Click to collapse
Gold card?? what??

Also, If I were to flash a JVS Based ROM do I need to be on stock JVS and a JVS Kernel to flash it?
Once on I'm on JVS custom ROM can I just go back again to JVQ stock (Older firmware) without problems?
Really appreciate all your help Bork84!

Basically using odin you can change to JVS and JVQ no problem.
As far as custom rom, from what I know it does not matter on which 2.3.x you are, thay all have the same bootloders. so technically you dont need to be on stock JVS to flash a JVS custom rom.
but I am not an expert on that.
from my experience, i flashed to a JVR (2.3.4) custom rom via CWM from a 2.3.3 stock rom, and didn't had any problems.
So i cant give you a 100% answer