Hello, newbie here.
I was following the guide in this thread:
http://forum.xda-developers.com/showthread.php?t=821698
the one using the heimdall method, but after installing the drivers for heimdall, why is it that I don't have the SAMSUNG MOBILE MODEM driver? It appears when my phone is connected in usb debugging mode but when I use adb to reboot the phone to download mode, the SAMSUNG MOBILE MODEM disappears.
I've already tried to reinstall the drivers three times but still no modem driver. I'm using the 1.1.1 version of Heimdall.
Am I doing something wrong? Attached is a screenshot of device manager.
If you're new to flashing your phone, I would suggest using ODIN. It's far simpler than using Heimdall.
nice! tried odin and it worked!
Related
Hi,
I'm about to Flash to 2.3.3 firmware.. but the problem is that after i put my SGS into download mode the Odin didn't recognize my SGS (ID:COM) didn't display YELLOW.., but while i'm on normal mode every time i connect to my laptop Odin always recognize it..
Please help...
Thanks
Start Odin after connecting the phone and the laptop has already 'seen' the phone.
Sent from my GT-I9000 using XDA App
It's recognized my phone, but once i turn it too download mode by " Volume down+Home+Power) and connect to laptop again.. it's never recognized...
Try running Kies in the background then connect and see what Odin says .
jje
Disconnect SGS USB cable... Close Odin. And update your SGS drivers!
http://forum.xda-developers.com/showthread.php?t=961956
-> Restart PC.
-> Open Odin, put in your files
-> Connect USB cable to PC, THEN to the SGS! (First PC, then Phone)
-> Hopefully you should see Yellow COM!
PS: While in Download Mode, and when connected to PC... Windows may download/update some more drivers. Let it happen! Do not disconnect!
There are two version (*86) and (*64) which one should i choose?
Never had this problem but can suggest few things
1. uninstall kies and reinstall SGS drivers only (Google them, they are available on net)
If doesn't work
2. do a factory reset and try with Odin
3. if not, restore the phone, if you have backup on Clockwork mode recovery.
As i said, never experience this issue, so just suggesting
x86 is for 32-bit Windows, and x64 is for 64-bit Windows!
To check what you own, Right-click on "My Computer" -> Properties -> And see what's written, 32-bit (x86) or 64-bit (x64)
Also, try uninstalling Kies, and install only the drivers posted on that link!
While running Odin, it is recommended that Kies should not be running, even as a service!
Okay, but my SGS is not yet rooted, so is there any chance the Odin didn't recognize my phone due to unrooted device??
i've got the same problem,cant upgrade to gingerbread because of it...tried everything suggested in this thread..even restored a backup i made using clockwork recovery...spent 3 weeks googling and restoring my phone reinstalling drivers e.t.c...ive given up and im stuck on froyo 2.2.1 XXJPY.
Rooted mobile or not rooted, no difference, odin shd recognize, u may try another version of odin or use update.zip or root it to install a custom rom, guessing, u might be missing some bootloaders
Sent from my GT-I9000 using XDA Premium App
Thanks.. For today i tried many ways... Tomorrow I'll try again... I somehow use to rooted my sgs using odin... But utter was long time ago and i couldn't remember.
Sent from my GT-I9000 using XDA App
See under galaxy s general forum ...howto(ref)(faq)...... Rooting is explained there, use update.zip procedure
http://forum.xda-developers.com/showthread.php?t=723596
Hope that works
Sent from my GT-I9000 using XDA Premium App
help!what should i do to fix this problem?i had this problem after i tried to flash 2.3.3 on my galaxy tab p1000.i tried to start the tab normally and download mode but same picture came out..!can i still fix this??? it happened after i the attempt of flashing failed,i don't know what to do.i read someone posted saying about ''jm6.zip'' but i can't find it anywhere.and what does it do actually? and if i were to re-flash a firmware, which firmware should i use?
*Be sure you plugged your tablet to your PC with USB and you're seeing "Phone->/!\->Computer" screen.
*if you re running windows be sure you installed usb drivers
*install heimdall command-line tool
*type "heimdall close-pc-screen" into the terminal
*watch the magic happens.
You're in download mode.
Load something with Heimdall.
D
thank you!will try this method soon!
erkangur said:
*Be sure you plugged your tablet to your PC with USB and you're seeing "Phone->/!\->Computer" screen.
*if you re running windows be sure you installed usb drivers
*install heimdall command-line tool
*type "heimdall close-pc-screen" into the terminal
*watch the magic happens.
Click to expand...
Click to collapse
Hello..where should i type the command?i cannot find ''terminal''..please help me..
Usually it happen when we have a damage rom.
Try to download again the rom.
Power on the galaxy tab and try to flash the rom again.
Don't forget to restart the tab by pressing the power on. When the tab connected to the pc and the flashing is failed
Sent from my GT-P1000 using xda premium
Recently i rooted my Samsung Galaxy Tab(SGT) GT-p1000 that was brought from Singapore using the oneclickroot method.
My problem began when i heard about using heimdall to flash custom ROMS on the SGT. So i downloaded the Heimdall files and used heimdall frontend to attempt to root my SGT. Before that i had already used the zadig files to install the samsung composite USB driver. However as i boot my SGT into download mood, i accidentally pressed start to flash into my SGT with only the zimage and a wrongly selected Factoryfs file, These were taken from the BOCA rom I wanted to try to install.
Then i think i went into Boca's bootloader but i couldnt do anything. So i tried to reboot the device but it couldnt boot anymore. Just showed and android with an Exclamation mark. So i saw this thread http://forum.xda-developers.com/showthread.php?t=966015 and i thought that maybe i could use heimdall to flash back the default files. So i reflashed the new FactoryFS Zimage and Param.ifs provided by this new rom.
Now i can boot the phone normally into froyo 2.21, however now everytime i press the lock button the phone retarts. And everytime i try to connect to the internet using WiFi my phone restarts as well. 3g no longer works too. T_T
I can no longer connect to Kies and i tried reinstalling the drivers again but nothing would fix it. I cant use Heimdall or Odin to flash it anymore, Heimdall faced error -12 and Odin just kept trying to secure connection, but it never passes that point.
IM REALLY LOST AS TO WHAT TO DO. SOMEBODY HELP ME!!! PLEASE!
ADB
1-char
dirlan2001 said:
ADB
1-char
Click to expand...
Click to collapse
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
rafaeker19 said:
I don´t think this can help.
I think your problem is that you installed a incorrect rom for your tab model.
Download this:
http://overcome.mimzo.com/p1000/downloads/GB-Stock-Safe-v5.zip
Reinstall samsung drivers.
and flash the file using odin, repartition checked.
Click to expand...
Click to collapse
Hmmm... Odin doesn't get connected , so ....
Probably Heimdall will also do the flash for you - Odin is just one Windows-based tool to flash that device. Heimdall should have the same features for differnt platforms (so you can use it also on MAC OSX and Linux)- give Overcome a trial - and don't forget to flash the modem, if you want a fully working device
I recently decided to flash a custom ROM on my Galaxy Mini. So i downloaded Kies, Odin 4.38, tass.ops and Clockworkmod, installed Kies, closed it, launched Odin, set everything, booted the device in download mode and when i connected it to my Laptop Odin simply didn't detect it. No yellow box, no alert, absolutely nothing.
The device already had Android 2.3.6 preinstalled, i didn't even touch the OS.
I already looked everywhere, but found no solution by myself.
Help would really be appreciated
Try uninstalling the Samsung usb driver from control panel then reinstalling it.
Edit: or use another cable and port.
Sent from my GT-S5570 using xda app-developers app
Solumos said:
I recently decided to flash a custom ROM on my Galaxy Mini. So i downloaded Kies, Odin 4.38, tass.ops and Clockworkmod, installed Kies, closed it, launched Odin, set everything, booted the device in download mode and when i connected it to my Laptop Odin simply didn't detect it. No yellow box, no alert, absolutely nothing.
The device already had Android 2.3.6 preinstalled, i didn't even touch the OS.
I already looked everywhere, but found no solution by myself.
Help would really be appreciated
Click to expand...
Click to collapse
When u installed kies, did u sync with ur mobile? Cause when u sync, it installs all the neccessary drivers. Or you could try downloading the drivers manually. Be sure to kill KIES when using odin cause they are sworn enemies
You didn't mention whether you installed mobile drivers or not!!! Try installing drivers once again. Then things will go on correctly.
Sent Via XDA™ Premium
If Still can't, Something wrong with your computer, like virus Ramnit in odin.exe
you can Run odin but odin can't do anything to detect even you installed your usb driver.
Just open can't read port and scan usb port.
To solved the problem try another PC.
But don't copy odin or usb.exe
to PC you want use.
Just One you can copy firmwares file zip or tar.md5
Sent from my GT-S5570
Try to disable antivirus...
Try to re-intsal usb driver
Try another cable usb ...
Sent from my GT-S6500D using xda app-developers app
So I tried to flash my Captivate I896 with Heimdall 1.3.1 and it worked and rebooted, but it is now stuck at the Talon boot screen.
I also then tried to flash it back to Stock ROM with ODIN, but when I connect it up, my phone does not show up on ODIN.
Anyone know what is wrong?
Also, yes, I did open up ODIN first, but it still wont recognize my phone.
See this thread for ur PC Connection issues. Heimdall uses its own usb drivers. Odin uses the Samsung drivers.
http://forum.xda-developers.com/showthread.php?p=33227541
Short answer...use a different usb port for Odin. The one u have been trying to use has the drivers for Heimdall installed.
Sent from my SGH-I777 using xda premium