Hi my friends, my xperia x1 doesn't boot up, it suffers a Failure Sony Update.. when i press down volume button and power button.. it doesn't work, i've tried the metod with reset buton and nothing, i can charge the phone, but in rest, nothing, please help me. . Thanks.
if you cant acces tricolor screen in my opinion your phone is dead
mihnea23 said:
Hi my friends, my xperia x1 doesn't boot up, it suffers a Failure Sony Update.. when i press down volume button and power button.. it doesn't work, i've tried the metod with reset buton and nothing, i can charge the phone, but in rest, nothing, please help me. . Thanks.
Click to expand...
Click to collapse
try to hold the on / off key with the camera key instead of volume key, then the tri-color screen will appears, run a custom rom and enjoy.
hope this work with you.
darkylight said:
try to hold the on / off key with the camera key instead of volume key, then the tri-color screen will appears, run a custom rom and enjoy.
hope this work with you.
Click to expand...
Click to collapse
Thank you very much, i have the same problem but now I can Update my Phone
Related
Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::
dont the manual spc how a hardreset is performed ?
Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.
rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right
what combination did you do to get to bootloader? just so we all know
im glad to help
Rory
rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.
go to bootloader is:
hold down button and press (red) reset button
Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse
I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.
Help me please guys I can not make a hard reset or flash a new ROM with the sd card method. (right volume button and power button). also hard reset doesn't work. (press both silver button and power button).
before always its OK but now i only flash with usb method.
thanks a lot
Can you still hard reset using |START|SETTINGS|SYSTEM|CLEAR STORAGE|?
What rom and SPL are you using?
You might need to Hard-SPL again.
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
the banished said:
I clear de storage ok. Thanks but the problem continues I can not enter to the three color screen (bootloader) I press power button and the right volume button but appears the SE logo screen. The rom.. Now is the original i follow the link NEW ORIGINAL X1 ROMS INCLUDING R3AA0xx update 19.6.2009.
about the Hard-SPL I do everything of the link " Hard-SPL for Xperia X1 - Released! "
and the process finish ok but I can not enter to the screen.
Whats Wrong?
my xperia is dying ??
Thanks for the answer buzz
Click to expand...
Click to collapse
Are your xperia volume keys working properly because it can be hardware issue....
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Fulgore69 said:
Are your xperia volume keys working properly because it can be hardware issue....
Click to expand...
Click to collapse
I test de volume keys and work fine
the banished said:
I test de volume keys and work fine
Click to expand...
Click to collapse
Are you using volume down?
Turn the phone off, hold volume down (and keep holding) then turn the phone on. Make sure it isn't connected to your PC when doing this.
Edit: Does it enter the bootloader correctly when you are using the Rom Update Utility?
jhendra said:
To hard reset:
When you're holding the silver key buttons press the power button NO MORE THAN A SECOND. Just press it very lightly and it should hard reset your device. Again do not hold the power button when you're holding the silver buttons.
Click to expand...
Click to collapse
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
the banished said:
yes jhendra I know how to... Before the problem I use the hard reset many times its for that reason I write this distressing letters
Thanks
Click to expand...
Click to collapse
Flash back to an earlier rom, HardSPL again and see if you can enter the bootloader and hard reset using the key combinations.
Whats ROM recommend me for this problem Buzz
the banished said:
Whats ROM recommend me for this problem Buzz
Click to expand...
Click to collapse
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
buzz83 said:
At Whirlpool (Australian forum) we recommend using this Generic UK R1A Rom to recover from bad flashes.
Check the recovering from a bad flash section of this page.
If things go wrong we recommend getting your phone completely back to stock and trying everything again from scratch. Then step through to see what is causing the error.
Click to expand...
Click to collapse
Great info thanks I will Read
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
the thing is:
if you want to go into the bootloader you need to press and hold the power button and the volume button down untill you get into the 3coloured screen.
exactly thats is all i want but a can't
all The keys (Volumen, Power, silver keys) Works Fine in Windows Mobile. but i can not make hard reset with the silver keys and button power. or worse i can not enter to the bootloader mode with volume key and power key.
before all its ok but now its like the keys dont work at the start.
to do a hard reset I just keep holding both softkeys and then I press the reset button with the stylus.
try it this way.
the banished said:
Buzz buddy how i can know what is the version of the bootloader if i can not enter to him??
I try many times. press and hold Right volume key and press de power key. and release power after the vibration. I am tired of the SE logo jaja.
early i try again to load the X1_HardSPL.exe with the pc and i see the three colors screen in the xperia. the screen show a 0.52 thats its OK??
Click to expand...
Click to collapse
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
buzz83 said:
Flash another rom using the Rom Update Utility and see if you can get the bootloader to load using the volume down and power buttons. It must be a software problem preventing you from using this key combination.
I can't seem to find how to start the bootloader without the key combination.
It might be worth sending OliNex a PM and asking for advice.
Click to expand...
Click to collapse
I think the same. I try to search and Search but my english i not the best and is a double job. jeje.
Thanks a lot for the help Buzz I keep search any solution.
And as they say in Spanish forums if you dont find the the answers in XDA you dont find on any page
hi ...
i have HTC opal and from while i have install a new ROM and it's work ok
then after two week .. my phone does'nt work he hang at boot screen
is there any way to format it with out it working .... please any help .
try a hard rest
Don't worry, your device is not damaged. Follow the guide here to fix your problem:
http://forum.xda-developers.com/showthread.php?t=685025
Note that you'll lose all data on your device when performing this fix. Hope you have a backup at hand!
Essential thing to be known:-
1. Bootloader mode Knowing how to enter into Bootloader mode is one of the most essential thing to be known for a opal user (windows mobile users).
How to enter?
There are two way to enter into bootloader mode.
1. If you device is on, open your device's back cover. Press the soft reset button ( red button ) using stylus. As soon as you press it, immediately press the volume down button and keep holding it until you see a tri-color screen on your device's screen.
2. If your device is off, press the power button as soon as the device vibrates immediately press volume down button and keep holding it until you see a tri-color screen on your device's screen.
Uses?
If you flashed a damaged rom, you would be no longer able to use your device. In that case enter into bootloader mode. And flash a different rom.
Click to expand...
Click to collapse
Good luck..
thnx .... i will try it ....
Hi, wondering if you guys could help me.
My HTC One is stuck on bootloop. I tried to install a GPE rom with S-ON and now it get's to the first screen of the setup and restarts itself. The problem is the volume keys are defunt therefore I can't get into recovery to flash another rom.
Is there anyway I can force the phone to boot to recovery or to hboot ? I tried to «adb reboot recovery» on boot but with no luck.
Really appriciate any help.
Put it under a light and try to longpress Power and vol-.
HI Guich, thanks for the reply.
I did try what you suggested: shined the flash from another cellphone on the One, at the top where the sensors are, and long pressed power+volume-. If I hold the buttons the phone will just restart endlessly and if I let go of the power button and hold the (defunt) volume- the phone will try to boot as standard.
What would the light do to the phone ? Is it supposed to trigger some of the sensors ?
Thanks!
deerxmoose said:
HI Guich, thanks for the reply.
I did try what you suggested: shined the flash from another cellphone on the One, at the top where the sensors are, and long pressed power+volume-. If I hold the buttons the phone will just restart endlessly and if I let go of the power button and hold the (defunt) volume- the phone will try to boot as standard.
What would the light do to the phone ? Is it supposed to trigger some of the sensors ?
Thanks!
Click to expand...
Click to collapse
His intention was to re-verify whether you were pressing the volume down key and not the volume up key. There are no hidden sensors im aware of. if nobody else can give u a solution, the only choice wud b a motherboard replacement frm HTC itself
deerxmoose said:
HI Guich, thanks for the reply.
I did try what you suggested: shined the flash from another cellphone on the One, at the top where the sensors are, and long pressed power+volume-. If I hold the buttons the phone will just restart endlessly and if I let go of the power button and hold the (defunt) volume- the phone will try to boot as standard.
What would the light do to the phone ? Is it supposed to trigger some of the sensors ?
Thanks!
Click to expand...
Click to collapse
Umh, if you longpress power and vol- it will boot?
Strange.
If you longpress under the light, theoritecally, it have to boot into the bootloader...
raghav kapur that's what I trying to avoid
Guich it boots because the volume button is broken.
I think my only chance is to, some how, force the phone to get into recovery or hboot whilst booting I just don't know how I could do that without the volume buttons.
Just another bit of information.
When I've got the phone connected to the pc, Windows tries to install an MTP device but never gets to finalize the installion because the phone reboots. If I leave the battery flat and then plug it in, with the charging animation on the phone, Windows tries to install an 'unkown device'.
deerxmoose said:
raghav kapur that's what I trying to avoid
Guich it boots because the volume button is broken.
I think my only chance is to, some how, force the phone to get into recovery or hboot whilst booting I just don't know how I could do that without the volume buttons.
Click to expand...
Click to collapse
deerxmoose said:
Just another bit of information.
When I've got the phone connected to the pc, Windows tries to install an MTP device but never gets to finalize the installion because the phone reboots. If I leave the battery flat and then plug it in, with the charging animation on the phone, Windows tries to install an 'unkown device'.
Click to expand...
Click to collapse
Ah, sorry, my mistake.
If you've a broken vol- you don't have a lot of chance...
It's an unknown device because it don't boot.
I got a problem, the installation of cm11 failed and now when I start my phone it freezes on the Sony logo. When I do a hard reset with the little button behind the backcover, my phone turns off (with no vibrations) and it restarts itself automatically and freezes again at the Sony logo.. Now I can't recover my phone.. Someone that can help me?
pergane said:
I got a problem, the installation of cm11 failed and now when I start my phone it freezes on the Sony logo. When I do a hard reset with the little button behind the backcover, my phone turns off (with no vibrations) and it restarts itself automatically and freezes again at the Sony logo.. Now I can't recover my phone.. Someone that can help me?
Click to expand...
Click to collapse
Try holding it longer until it vibrates and then flash stock firmware through flashtool.
velnens123 said:
Try holding it longer until it vibrates and then flash stock firmware through flashtool.
Click to expand...
Click to collapse
That's the problem it doesn't vibrate, I press the button, it restart and freeze again. When I am holding the button, it restarts, shut off, restart, shut off, restart, shut off,...
Are you sure you're pressing it hard enough and holding it for at least 10 seconds? Maybe your OFF button is damaged. What kind of object are you using to press it?
Yes I'm pressing it hard enough and I use the point of a pen
But it's alright, I had to keep pressing it with the VOL- pressed and recovered it with SUS.
Thanks
I am glad you got it sorted out