Related
Hi all, I hope you're not all tired of another noob posting up how-to questions. I come from a pretty solid background of writing modified firmware packages Motorola and Blackberry units, and writing custom themes for them both, so I am a bit familiar with the processes involved in rooting. Android is an entirely new beast though. I love it already, but I've also identified some things I'd love to be able to change. I've been reading everything I can in these forums for the past week, and I think I might be nearly ready to start diving into the root world. Yes, I've used the search a LOT Before I do root though, I wonder if you all might be able to add some insight into a few questions I haven't found the answers to thus far:
My rooting goals: remove the AT&T bloatware, possibly do a lag fix, and above all, do it the safest way possible. Baby steps first for me.
1) Rooting methods: Should I do the manual way, I found in that pdf guide on this site, the "GalaxyS_One-Click_Root_All_Models.zip" method, the mystery "update.zip" folder method, or the "one click root lag fix" method? Which is the safest and most tried and true for Stock 2.1 f/w, Baseband I897UCJH7? Also, what would be the best method to use if I wanted later to unroot?
2) Lag fixes: I've read that lag fixes can cause major problems when trying to undo them later on. Is there a lag fix that works well that is safer than others to load that can be removed easily? Are lag fixes even worth it?
3) Odin3: Am I correct in assuming that since I have JH7 that the most recent version of Odin is not capable of fully restoring my phone back to stock? I've been seeing posts from many people say that even using Odin, their phones get stuck during the revert process and cannot get back to stock. This is probably my biggest concern of all, in case I brick my phone. I've done that a LOT of times with Motorolas, and it's not a bit of fun trying to restore them.
Thanks very much in advance. Best wishes to all
The first piece of advice I have is make sure you have a cappi that you can get into recovery and download modes via the button combinations - if you can do this then you will be able to recover to a working configuration from just about any situation.
second, make sure you want to do this, because as you can get back to a "stock configuration" once you begin applying lag fixes or custom roms you will not likely be ever able to get back to your own stock configuration.
As for which rooting method - I have used and update zip and ryanza OCLF to root. Both of these methods are easy to unroot - at least until you begin applying lag fixes and/or custom roms.
If you are sure you want to move forward and root the very first thing you should do after rooting before you do any lag fixes or remove any bloat is get clockwork rom manager. Learn how to use rom manager and make a full nandroid backup of your phone before you do anything. If you have a good nandroid backup saved in a safe location then you can use this to get back as close as possible as you can to your own stock configuration later on.
Oden3 will get you back to a stock jf6 configuration. This will not be your stock configuration, but it is a working stock configuration.
Lag fixes do improve the lag in the file system some. However, before you play with any of them educate yourself as much as you can about the particular one you are going to try and use. I have applied both OCLF and voodoo and have been able to remove both of them. But if you don't follow the steps correctly you can have problems - after all with the lag fixes you are reformatting part or all of your data partition where the os is residing which is inherently risky. You can easily lose data and even soft brick your phone forcing you to use Oden3 to get back to a working state.
Lastly, I am running Cognition 2.2 beta 5 very successfully - and I do recommend it for anyone that has entered the rabbit hole of modifying this phone. And with my current config my phone is running so well that the lag fix is not needed for me anyway. My phone is running smooth and fast.
P.S. Just make sure you are not going to have any major regrets if things go wrong before you do anything at all, because any and all of these steps have some amount of risk associated with them. Make sure you are prepared for dealing with voiding your warranty and even though it is hard to brick this phone, it could still happen so be ready for that too should it happen.
i would agree, go with cognition 2.2. i only had my captivate for a day, and found it very easy to get it installed without any hassle.
Thanks for the info all. I've read about Cognition a fair bit and was wondering if I ought to go for it. What are the differences between it and the standrd Froyo leak?
A more pressing question: If I went to Cognition 2.2, would I be able to easily get the official release OTA and install it normally when/if it becomes available? Are there step-by-step guides out there for getting that release onto and off of the phone? I'd hate to get Cognition on there and find out that i couldn't easily get it back to a state where I could get the full deal on there. I've read some horror stories about just that lately...
charging rhinos said:
Thanks for the info all. I've read about Cognition a fair bit and was wondering if I ought to go for it. What are the differences between it and the standrd Froyo leak?
A more pressing question: If I went to Cognition 2.2, would I be able to easily get the official release OTA and install it normally when/if it becomes available? Are there step-by-step guides out there for getting that release onto and off of the phone? I'd hate to get Cognition on there and find out that i couldn't easily get it back to a state where I could get the full deal on there. I've read some horror stories about just that lately...
Click to expand...
Click to collapse
If you are wanting to get OTA updates then I wouldn't even root your phone - while it is possible to still get OTA's after rooting, once you begin modding (lag fix, or custom rom) you oare increasing making your phone less and les compatible with any OTA available.
NOTE: I personally will not ever apply an OTA myself - but rather will wait for someone else to create a custom mod of any OTA feature I like - them donate that dev a few dollars and use their mod.
Im getting my cap this Friday, I was going to post the same thing OP. Looks like cog 2.2 is the way to go when i get it.
Hello can someone clarify my issues. So I have default stock captivate and want to do some stuff. I need to root,enable side-load, unlcok and update to leaked froyo 2.2. What order do I do this in? I'm pretty sure root first, but if i root and enable sideload, will it carry over after I flash 2.2 with odin??? thank you everyone in advance.
I'm a noob too but I was HIGHLY satisfied with OCLF, an app you can get on the market. AT&T will hide it from you though so turn on airplane mode and use wifi and you can find it on the market. That won't unlock or give you Froyo but it'll help with everything else and also make you phone crazy, crazy fast. Go for the donate version - it's good karma if you can spare the guy a few bucks.
Also maybe check out the thread I just wrote, we are in the same boat Froyo-wise.
joeshmoe08 said:
Hello can someone clarify my issues. So I have default stock captivate and want to do some stuff. I need to root,enable side-load, unlcok and update to leaked froyo 2.2. What order do I do this in? I'm pretty sure root first, but if i root and enable sideload, will it carry over after I flash 2.2 with odin??? thank you everyone in advance.
Click to expand...
Click to collapse
Pretty much anything you flash will overwrite whatever you have done to it anyway.
If you go to leaked froyo it is in Odin One-Click form and can be found in the development threads. You will also have to reenable side-loading, root, etc manually. It's all easy enough. Forum search is your friend!
Cognition, CDE or Deviant can be done using ClockworkMod or Odin. (not so one-click) If using ClockworkMod you'll need root. Odin is a bit more complicated but worth learning and doesn't require you be rooted as it does it's magic with your phone in download mode. These will all be rooted and side-load enable out of the box.
Your SDcard should remain intact if you don't master clear or format your SDcard. Two camps on this, one says YES! then other says "yawn." Your milage may vary.
Unlocking is trickier. Some say it lives through it, some have been "disappointed." (REALLY disappointed.) I'd search diligently if you require it.
I'd caution you to make sure you can do 3 button combos to get into recovery and download before you begin. And find your android_id and write it down. You'll be wanting that down the road.
Good luck!
Got my phone (AT&T Captivate, firmware 2.1-update1 version JH7, kernel 2.6.29, build eclair.UCJH7) on december 28 from a AT&T store (it even came with a pic taken december 20 ) and I've already been able to boot into download mode (power off, hold volume keys then plug usb) and into that menu used to install packages (power off, hold volume keys then power on). Guess my hardware and firmware are ok, so I may be able to recover my phone by myself in case things go south.
I've been doing my homework lately (been reading stickys, tutorials and faqs for 10 days) but I'm still confused about some procedures. I'm not going to list everything I've read here, but I would like someone to correct me if I've learnt wrong. I don't really need the easiest methods, I want to understand the options available and to choose the best ones (aka the hardest path).
First of all, it seems I need to root my phone in order to be able to create backups, carrier-unlock it and flash custom roms. But it doesn't make much sense to me, since rooting it seem to be enough to prevent it from receiving FOTA updates - and I want to make the most comprehensive backup possible, in such a way I could restore my phone to 'factory condition' if needed.
Second, I realize there are many ways, programs and guides to root the phone - the most famous ones, One-Click root/unroot and z4root, seem to be listed in the wiki (http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897), but there is also CLShortFuse's One-Click Root and Allow Non-Market Apps, which sounds interesting but I don't know if it is undo-able. So there are different ways to root the phone, but there is little to none information on what's the difference between these methods, which is 'better' and what difference does it make if I root it permanently or by some reversible method. Does it affect performance? How each of them work? I have no clue.
The mess gets even greater when it comes to creating backups. People mention different programs to make these backups (clockwork recovery, titanium backup) but I don't understand if they back up different parts of the phone. Some even seem to change the bootloader of the phone - shouldn't it be backed up prior to any modification? Do I flash these backups using Odin? Which programs should I use to have a full backup? Is there anything left I should back up manually?
I'll quit talking for now because I've already written a lot and I still have many questions; if I write all of them at once, no one will ever have the patience to read them.
Erk, a long post deserves a long answer
So first off, il tell you about recovering your phone. Since you just got it, you can go back to the store and play dumb to get a new one in case anything goes wrong. You can also use the 3 button combos to get into download mode and use odins back to stock to get back to your original 2.1 eclair firmware . To do that you would need to get into download mode. Now there are a couple ways to do this, and i can only explain two since ive actually used two. (Well 3 actually, but il get to the third after these 2)
The first method is using the 3 button combo which you should already know. The second method is using adb commands such as (adb shell, adb reboot download, adb reboot recovery, adb devices). The third way is building a jig. Thats basically connecting 301k 1/4 watt worth of resistors together and placing them on pin 4 and 5 on your micro usb slot. You can read more about that on the tutorial on how to build a jig for your phone.
To restore to your factory setting, odin's one click back to stock thing should do the job. It simple installs the stock 2.1 eclair all over again (without the root).
To root your phone, any method from the wiki should work. None of them are really "better" :S, they all do the same job and give you super user permissions. None of them root your permanently since you can always go back to stock using Odin's... It does not really affect performance, not to any extent i have noticed :S, and unfortunately, i dont really know how it works.
As for creating backups, Titanium Backup is the best solution. Whether you have the few extra bucks to spend for the premium one or simply want to use the free one, its one of the best tools out there. I personally use it and its one of the best. It backs up all the data (except for my text messages). It creates a folder on your internal memory which you can just copy to your desktop. When the time comes that you need to restore your backup, just copy the folder back into your internal memory, load up titanium backup. Restore it and voila .
I think ive answered everything, if ive missed anything, let me know
Edit : Forgot to mention this . If your truly interested in customization. Custom roms are the best there is a howto in the themes and apps section on how to install it. It comes pre-rooted (if that is the word to use :S) and theyre much better than the stock firmware. Im currently using serendipity v3.0 (flashed it yesterday)
supaphreek, guess I'll have to thank you twice: once for reading my enormous post, and again for you supacompleteanswer.
I'm being paranoid with recovery because I actually bought the phone in the US then came back to my country (Brazil), so I'm a few thousand miles away from the simple lets-return-this-thing solution.
From everything I've read, I believe the most instructive were the wiki at http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I897 , the FAQ at http://forum.xda-developers.com/showthread.php?t=858765 , the PDF guide from user nbs11 at http://forum.xda-developers.com/showthread.php?t=761819 and the wiki at http://www.capfaq.com/w/FAQ. These contain most of the info a newbie user would ever need and I'd definitely recommend them to any newbie user who happen to be reading this. And for everyone afraid of bricking, it's a tremendous relief to know pretty much any mess you do can be reverted using download mode and Odin, so the first thing to test is if you can get into download mode using one of the ways described by our buddy supaphreek.
On the rooting matter, I found no discussion at all about which is better, so they should be pretty similar (though I have no idea which is the oldest version, I'd assume the recent ones might be a little improved). There is some discussion on what's the better lagfix and many of the cooked ROMs already come with some lagfix installed, but this is another story...
Once I get my phone rooted, it seems to be trivial to carrier-unlock it. There's even an app on android market for this, so I won't even need sideloading. Since all this procedure does is just give me a number, there's hardly any difference among all the unlocking procedures out there.
For the backup, I'll still do it using both titanium and clockwork, as suggested by nbs11 on the pdf I've linked on this post. Better safe than sorry, right?
And yes, I'm truly interested in customization and I'll go deep down that path, I'm just packing up my head with some knowledge to avoid being desperate if things eventually go fubar.
As a last question, is there somewhere I can get 1-click Odin with my exact firmware version? (2.1-update1, I897UCJH7, Kernel 2.6.29 [email protected] #2, build eclair.ucjh7) And how important is it to get the exact same firmware?
As I've done my research, I found 1-click odin with JF6 here: http://forum.xda-developers.com/showthread.php?t=731989
I've also found the 'standalone' I897UCJH7 on this topic (where this guy even flashed succesfully his phone using old JH2 firmware without problems, so finding the exact firmware version might not be the greatest issue): http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36 but this process is a bit more complicated and uses regular Odin and clockwork recovery. Nonetheless, from what I've understood, I can still use any old version of odin to flash JF6 then use my own clockwork backup, right?
Hmm, unfortunately, im not sure if there is a specific Odin for that firmware :S. However what you can do is use one that reverts you to any stock version, and then flash the version you want through clockwork mod
I'll do that. Thanks again!
Also if you one click to stock, you can OTA update to the most recent firnware. I suggest titanium premium if you are going to flash a lot of custom roms, it is a lot faster to restore and also syncs with dropbox
Sent from my SAMSUNG-SGH-I897 using XDA App
Be careful trying to flash with odin. Some newer builds get instabrick flashing back to jf6 and must go with jh2 or newer.
So, you may want to invest a few bucks in a jig setup before blindly using odin.
Thanks for the tip, sixstringsg.
Newter55, as my phone is brand new I believe I may have one of these insta-brickable devices. If I happen to try flashing it with a recent rom, does it get recoverably bricked (fixed by flashing an older rom), or I'm left with a $500 paperweight?
You just need to use the correct firmware version of odin if you manage to get in trouble. Many people flash rom over rom, including myself, but it is highly likely that at some point you will need odin if you are flashing roms so it is best to ensure that you have that set up first. Look for the odin thread by c3popl (sp?) in development forum and you should find what you need. Read through that and look for others with your base firmware. Or look through q&a at the "help I bricked" threads . On my phone and posting links is a pita or I would make it easy for you.
If your phone came with JH7, follow this guide:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
If you use one of the Odin one-clicks and brick your phone, you'll need a USB jig to recover.
You guys are awesome. Thank you newter55 and GGXtreme for this info! I hope I'll never need it, but I'll buy a cable and make a jig.
The news: I've rooted my phone using One Click Root / Unroot by TGA_Gunnman (for the record: it worked with my JH7 Captivate bought in 28 dec). Once I booted windows, installed dotnet framework 4 and the samsung drivers (easy too, but a pita), rooting was easy and failproof. However, someone using linux might find it easier to just download 1-click root, find the root.zip file in there, rename it as update.zip, put the zip in the internal sdcard, boot the phone holding the volume buttons and then 'install packages'. This way there will be no need to fight Wine nor install anything nor look for a windows computer with admin privileges.
Also unlocked my phone using SGS Unlock Tool, available in the Android Market. The unrooted option won't work, but once rooted it worked like a champ. Next step: I'll do the backups, and then... start messing up my new toy!
I just got a new I9000 Running 2.2 from Vodaphone in Australia.
Getting very bored of it in stock form and want an increase its speed/features as much as I can. Unfortunately I know absolutely nothing about anything custom. This is my first smart phone.
The amount of custom stuff released for this phone is mind numbing, and I know there is a lot of potential there to be unlocked.
So my question is in mid 2011, near the end of the phones prime life, what is the generally accepted best thing you can do with this phone? I'm sure after all this time many things have become redundant and been replaced by better things?
In a nutshell I want to get my phone to the highest speed and feature rich state I can. Speed is definitely the highest priority followed by features and ease of use.
This includes any kind of modding including overclocking.
What I know about this phone is from when it was released there used to be lagfix, voodoofix etc to change the file system and speed up the phone. But have those things been replace by custom roms now etc?
I can follow instructions easily, but as long as they encompass everything from Stock form to completion.
For example I really don't like guides or instructions that as a first step they say something like
"Before you do this made you have rooted your phone, go into flash recovery mode use the Jhp.ascii and use odin to enter download mode. male sure you have the dbdata.rfs, boot.bin in the directory before proceeding"
I want instructions that tell you how to root the phone properly, how/what flash recovery to use, how do I use get Odin etc what all these files are what they do how to get them etc.
Bassicaly talking someone who has never flown before into landing a plane.
I think for many of the people who write instructions things they see as completely obvious basic and what they consider common knowledge are completely unknown to new people. I find 97% of the instructions for any modding mention things where prior knowledge is assumed.
Lastly even if you know how to follow instructions, the amount of stuff available for this phones means I wouldn't know where to start. So I need to know what are the most favoured mods to do, in as complete packages as possible.For example I would rather flash with one mega rom that comes with everything than install every little tweak manually
Hi go checkout romkitchen.org
Also live support in irc, check my sig.
See you there ;-)
Thanks. I'll definitely be checking that chanel out if I can't manage here, but it will have to be sometime next week for irc.
At the moment Im busy doing things around the house and I may need to go in out at any time so I was hoping for a forum post so I can read it and check up on it when I can.
But like I said when I get a few hours of no interuptions I may sit down to do all the mods live
So is darkys rom any good?
From what I can tell its
Root phone.
Install Darkys ROM.
Done.
I just need to get someone to tell me if my phone is fully compatible, and how to back up my vodaphone stock firmware if its not available on the internet already.
Phone info.
Baseband version
I9000HVJP3
KERNEL VERSION
2.6.32.9
[email protected] #6
BUILD NUMBER
FROYO.HVJP4
My personal experience is that whenever you're using a custom rom, you're using a lot more potential of your phone, than by using a Stock-Rom, updated by Kies.
The Guides all seem a bit hardcore when you start first, but it really is worth it. I recommend you start with the EZbase Guide which offers a step by step guide with screenshots (which I was really happy for, having no clue where to start), located here: http://forum.xda-developers.com/showthread.php?t=991792
After reading AND understanding this guide, you are good to go to start flashing, BUT every flash has a potential risk of bricking your phone, making it a pretty expensive paperweight. If you come to bootloops or a lot of force closes on start: Don't be worried, you can fix this (or at least i could after running into them). The first time I flashed was due to lots of force closes after updating with Kies, which was my start for using custom roms.
The choice of custom rom is pretty much your own. There are several roms I liked and there is one, I pretty much stick with: Insanity (currently using 8.5, which has some battery drain issues for me, after loading the battery or putting the phone to flight mode ... I'm gonna report that to nitr8, once I got 10 Posts ).
However, you got to (or rather better) find your own favorite.
When I got the phone I was told it was locked.
Will this interfere with any modding?
I was told I can call vodaphone and they will unlock it for me, but it seems there is also a hack way to unlock it.
. Unlocking your phone.
--Why, when, where: If you bought your phone with a contract, chances are that it might be locked in that specific network. If you want to also use other SIM cards in it, that are from another provider, you will have to unlock the phone (!! WARNING !! in most cases this will lead to a void warranty, please consult your contract).
--Prerequisites: Root privileges, adb.
8.1. Get the /efs/nv_data.bin file from your device to your computer. You can do this either with adb or by copying the file to your SD card with "Root Explorer" and then copying it over to your machine from the SD (Be sure to keep a backup of this file and the /efs/.nv_data.bin.md5 file.)
8.2. Open up the file in a hex editor, go to the address 0x181468, where you will see something like this:
FF 01 00 00 00 00 46 46 46...
We are interested in that first '01', that means the phone is locked. Just change it to '00' and save the file. Copy it back to your SD card and then with "Root Explorer" back to it's original location (or 'push' it directly with adb). Then remove the .nv_data.bin.md5 file and restart the device (Again, be sure to make copies of these files before modifying or deleting them!). After this, you should be able to insert any SIM card into your device and it should work without the need for any further hacks.
miui for beauty and speed
welcome to the galaxy of galaxy S ROMs..
you have made a very wise decision to buy galaxy S.... even though a year old it blows every single core phone out of the water..
now back to your question:
1. ROM :
if you are looking for speed and beauty then you don't have any other place to go than MIUI..
other custom ROMs are good but they are just some cosmetic change of galaxy ROM. .but MIUI is totally different.. (awesome would be understatement)
Trust me I have battery problem in MIUI but still I can't go back to samsung ROM>
that is how good the ROM is... others are getting good battery life out of the latest MIUI ROM... with the latest kernel you can overclock your phone upto 1.5 ghz...
http://forum.xda-developers.com/showthread.php?t=992251
head over to this link and read carefully and decide whether you want to flash this ROM or not..
there are other good gingerbread ROMs as well though I have not tried most of them..
2. VOODOO sound!!!!!
this is the biggest thing that has happened to galaxy S... google it once and you will know its awesomeness.. It's basically well tuned sound driver made by supercurio... most of the people after using voodoo sound have considered galaxy S to be the most awesome sounding music player (not just phone) ever..
better than iphone and other DAP..
(most of the custom ROMs comes with kernel supporting VOODOO sound... you just need to download voodoo app from the market)
I think those are the two awesome things you can do with your galaxy S...
there are other things too that you can learn if you follow xda..
happy XDAing
steps for installing MIUI ROM
to make things short,, just follow these 8 steps.. that's it
0: Be sure that you're based on a Froyo FW! CRUCIAL.
1: Load these files:
a) galaxy-efsbackup.zip / Mirror
b) cm7-galaxys-initial-kernel.tar / Mirror
c) MIUI MCGv1 / Mirror
d) speedmod-kernel-k13c-500hz.tar / Mirror
(thanks to creative59 for mirrors!)
2: Copy all files except:
speedmod-kernel-k13c-500hz.tar & cm7-galaxys-initial-kernel.tar
3: Flash speedmod-kernel-k13c-500hz.tar via Odin, wait for reboot and after that shutdown
4: Start via 3-button-combo in recovery mode and install galaxys-efsbackup.zip
5: Pull out battery and in again, start via 3-button-combo via download mode and flash cm7-galaxys-initial-kernel.tar via Odin BUT DON'T check repartition and auto reboot
6: Pull out the USB cable and start (in download mode) with 3-button-combo in recovery mode (waiting until samsung logo appears)
7: Choose "mounts & storage" and format system, data, cache
8: Flash MIUI MCGv1.
First and foremost check if bootloader locked...then check the recovery / download modes work and then proceed...
Sent from my GT-P1000 using XDA Premium App
Thanks for your post ujjwal321. For a first attempt, I am very happy with what you suggested. I think there is enough there for me to try it on my own and MIUI seems good.
A few things I'd like to point out though. The ONLY reason I actually decided I have enough information from your post to mod is because of the youtube video that goes through the install process. There is absolutely no way would ever know what to do without the video, and most roms do not come with it.
I am very unhappy at the level of ease and lack of instructions in the written instructions of roms...
For example If I did not watch the video, I would never know to put the phone in "USB Debug" mode.
Why are things like this not listed in step by step instructions?
Secondly, even the things that are listed like
": Load these files:
a) galaxy-efsbackup.zip / Mirror
b) cm7-galaxys-initial-kernel.tar / Mirror
c) MIUI MCGv3 / Mirror
d) speedmod-kernel-k13c-500hz.tar / Mirror"
are baffling.
To someone doing this for the first time the word "load" is as meaningless as kaka
Load to what!?
"Copy all files except:
speedmod-kernel-k13c-500hz.tar & cm7-galaxys-initial-kernel.tar
3: Flash speedmod-kernel-k13c-500hz.tar via Odin, wait for reboot and after that shutdown"
Copy to what? Flash to what, how? what is flash?
Luckily by looking at the video, I know exactly what to do. However its all because of monkey see monkey do, there is no level of good communication through a good set of instructions or guide, and thus there incomplete understanding on my end.
IMPORTANT
Before doing any of these things, does my phone need to be rooted? Currently it is locked and completely stock. Or Can I just follow the youtube video instructions from the get go? I also just read "When upgrading to 1.5.20 you need to wipe data, datadata, cache and system!". What? All I know is how to go to settings>SD card and storage and format the SD card, as well as Privacy>reset settings>Factory settings, Is this enough?
I ask because form what I have seen so far nothing is clear cut and your meant to already know 99 facts for every 1 mentioned.
Lastly, before I do any flashing, I really NEED to know either how to back up my current firmware, or if it is available online. It is Aussie vodaphone 2.2
What do I do in case I need to claim warranty? I need to put the stock one back on. I have 2 years of warranty after all, If I don't back it up I loose all that.
So, can anyone shed some light on this?
P.S blackheart, I can enter the download mode and the recovery mode by doing the 3 button combo, it goes into the respective screens and i can scroll up down using the volume button. I have not done anything more than that, I hope that means its not locked.
Hey!
About the loading of files. It just means u copy them to your phone.
There are 2 ways of flashing. With odin/heimdall, and through the phones recovery. To flash in the recovery the files need to be located in the phones memory.
Before flashing without having any clue i suggest reading a lot of faqs etc.
Sent from my GT-I9000 using XDA App
I realky recomend ezbase as your start point. Idiot proof instructions, it worked for me so they must be!
Sent from gt i9000 insanity 8.5/fugumod
Get CM7 and you'll never look back
splendidtry said:
I just got a new I9000 Running 2.2 from Vodaphone in Australia.
Getting very bored of it in stock form and want an increase its speed/features as much as I can. Unfortunately I know absolutely nothing about anything custom. This is my first smart phone.
The amount of custom stuff released for this phone is mind numbing, and I know there is a lot of potential there to be unlocked.
So my question is in mid 2011, near the end of the phones prime life, what is the generally accepted best thing you can do with this phone? I'm sure after all this time many things have become redundant and been replaced by better things?
In a nutshell I want to get my phone to the highest speed and feature rich state I can. Speed is definitely the highest priority followed by features and ease of use.
This includes any kind of modding including overclocking.
What I know about this phone is from when it was released there used to be lagfix, voodoofix etc to change the file system and speed up the phone. But have those things been replace by custom roms now etc?
I can follow instructions easily, but as long as they encompass everything from Stock form to completion.
For example I really don't like guides or instructions that as a first step they say something like
"Before you do this made you have rooted your phone, go into flash recovery mode use the Jhp.ascii and use odin to enter download mode. male sure you have the dbdata.rfs, boot.bin in the directory before proceeding"
I want instructions that tell you how to root the phone properly, how/what flash recovery to use, how do I use get Odin etc what all these files are what they do how to get them etc.
Bassicaly talking someone who has never flown before into landing a plane.
I think for many of the people who write instructions things they see as completely obvious basic and what they consider common knowledge are completely unknown to new people. I find 97% of the instructions for any modding mention things where prior knowledge is assumed.
Lastly even if you know how to follow instructions, the amount of stuff available for this phones means I wouldn't know where to start. So I need to know what are the most favoured mods to do, in as complete packages as possible.For example I would rather flash with one mega rom that comes with everything than install every little tweak manually
Click to expand...
Click to collapse
Here are some instructions I gave to someone in a similar situations. Install videos are available on my site sgsromreviews.weebly.com. Hope you find this useful
1. Download Odin 1.3, Tweaky ROM, CF Root Kernal and JVH firmware 2. Use Odin to flash JVH.(you need to get the phone in to download mode using the vol down key + home key + power at the same time. (If this does not work I WOULD STOP NOW AND LOOK AT HACKING YOUR PHONE TO ENABLE THIS FUNCTION) 3. In select the JVH .tar file in the PDA section. DO NOT TICK RE-PARTITION and then click start 4. The initial boot will take longer than usual so be patient, if your phone begins to vibrate constantly and for no reason then take the battery out and enter download mode again for re-flashing (if this happens feel free to email me again for further advice) 5. Once you are running JVH copy Tweaky ROM over to your INTERNAL SD card 6. Enter the back in to download mode 7. Use Odin to flash the CF Root Kernal, select the .tar file in the PDA section again and again DO NOT TICK RE-PARTITION 8. Once this has booted turn the phone off and enter clockwork recovery using the vol up key + home key + power at the same time until the white Galaxy S I-9000 writing comes on the screen then let go 9. Navigate clockwork recovery using the vol keys and the power key to select. Go down to install .zip from SD card, then choose .zip from SD card and choose to install Tweaky 10. Use clockwork to wipe data then wipe dalvik cache (found in advanced section) 11. Reboot phone and enjoy Tweaky
I have provided the download links for you, if you need more help feel free to ask.
Thanks Chris
Odin 1.3 http://www.multiupload.com/4JLU4QHUV7 Tweaky http://forum.xda-developers.com/showthread.php? t=1059561 CF Root http://forum.xda-developers.com/showthread.php? t=788108 JVH http://www.samfirmware.com/ (free account needed to download)
Sent from my GT-I9000 using XDA Premium App
Im a relatively new flasher as well, so I know exactly what you're going through just now!
That said, I've done about 15 flashes now so I feel I have a good grasp of what's required. I would also like to suggest MIUI. I have tried a few of the roms out there, but MIUI simply takes my breath away it's that good.
To give you an idea of how good it is, I've flashed it onto 4 other peoples phones because they were blown away by it!
If you need any help with what to do, PM me. I'll put together a package of everything that you need and I'll happily sit and explain each and every step to you personally if need be (if you are a gamer and use Ventrillo I'll verbally speak you through the process as well).
As for returning to stock, you can restore your phone back to it's original state by downloading stock firmware and isntalling that on your phone. It's very simple. EXBase is probably the most straightforward one there is that I have come across.
alright installed MIUI.
Looks like it will take a while to get used to compared to the stock rom. I dont know if its any better yet. Just different. I am not seeing any more features, actually kind of less, but I am sure I am missing a lot.
It is faster though.
Anyway, how do I overclock now? There seems to be no options for that.
I also dont like how its all symbols and no writing.
Al in all seems like a decent stable rom.
I'm planning on updating my ROM soon and was wondering if there was anything special I need to do to my phone prior to flashing the new ROM?
I'm currently on JPP with the hardcore speedmod i1r2, so pretty old compared to what's out there now. I flashed the hardcore kernel previously via Odin.
If I follow the instructions on [email protected] http://insanity.rollus.net/EZbase/EZbase-2.00.pdf but replace the insanity ROM with any other ROM (e.g. JUWE ROM), will it work ok?
Thanks
MIUI is awesome i can second that !!
since i switched to MIUI on RC3 months ago, i havent looked back.
MIUI is packed full of features and gets updates weekly / sometimes daily lol
just get familiar with it and you will discover its true beauty
azzledazzle said:
MIUI is awesome i can second that !!
since i switched to MIUI on RC3 months ago, i havent looked back.
MIUI is packed full of features and gets updates weekly / sometimes daily lol
just get familiar with it and you will discover its true beauty
Click to expand...
Click to collapse
(Be aware I don't know much about MIUI or smart phone software in general.
and I just installed it about an hour ago)
What features is is packed full of? I want to know so I can try it out/make use of it.
The only new thing I see extra is that maxthon internet browser.
Everything else I notice that is different, its funnily enough things missing compared to stock.
For example where are is the ability to add all the shortcuts/apps etc on the main screen by just holding the screen down? A lot similar features like this seem either not there or or at least harder to find/make use of comapred to stock.
Some things are just definitely taking a step back, for example adding a Doom 1 style grey border on the camera.
And my fav live wallpaper, Aurora, doesn't work on MIUI. It just crashes and I have to force close?
Also TV out doesn't work, and choppy movie playback?
And my 3d performance seems to have gone down about 15% from stock Stock, frames hit about 570, MIUI, about 470.
I'll be using it for longer but I gotta figure out what all the hype is about.
I think a stock rom + speedmod and lagfix is the most easy and the fist step to any new user of SGS?
as its really simple to apply
yihinlau said:
I think a stock rom + speedmod and lagfix is the most easy and the fist step to any new user of SGS?
as its really simple to apply
Click to expand...
Click to collapse
So by flashing to MIUI from complete stock phone, did I achieve all of this plus more? OR did I miss something? E.g do I have lagfix as well? Or do I need to install this on top of MIUI?
I followed the install instructions step by step. 3.11 MIUI.
It seems like my Benchmark scores aren't flying like I expected them to, and the phone still lags/jerks on animations doesn't respond etc...
My Quadrant standard score went from 1000 on the stock phone to 1700 when I flashed to MIUI.
I also decided to install setcpu and overlocked to 1.2 ghz then 1.4 on both the on demand and performance setting
And still my score only goes up to about 1900 quadrant standard score on 1.4ghz :S
I find it strange that people are getting much higher much more easily.
For example how did this phone get 2500 just on 1.2ghz? Is it MIUI that sucks?
http://www.intomobile.com/2010/08/1...ck-hits-1-2ghz-delivers-off-chart-benchmarks/
I feel like I would have to go to 2.5Ghz to get that score.
Not to mention 3100? Wow?
http://www.addictivetips.com/mobile/overclock-samsung-galaxy-s-to-1-6-ghz-blows-off-competition/
What am I doing wrong here? What are they using?
like I said I also noticed 3d perf went down from stock 2.2
On the stock 2.2 the total frames was higher. For example in the test with the corridor and cube, my frames would reach about 570 at the end of the test on 2.2 stock ROM.
On MIUI ROM it only reaches about 476.
Hi guys,
I have a I9000T on official Gingerbread. I want to root it to try some GPS fixes since my GPS cannot even give me a lock.
Anyway, I have been reading and reading these threads and I am absolutely confused! In some place I see that I should have 3-button combo fix before rooting but then when I go to the 3 button combo fix threads I read, that I need to be either superuser (which need root) or they say you have to root first.
Here is my worry, I bought my phone on amazon, it is an "international version" (not US) and thus Samsung US does not want to deal with me, so if I brick my phone I am pretty much screwed. Amazon uses some obscur warranty service but it seems it is quite restrictive, so I really would like to avoid bricking my phone since I won't have to option to ship the phone to Samsung.
So, please can someone tell me what I am supposed to do?
Also, for those who are familiar with the 3 button combo fix, I have a few questions after reading the thread:
- is Odin3 1.3 still ok to use (I see there is a 1.7 version but not a lot of people seem to use it)
- Are Odin3 and the fix file (.md5) are ok to use on 2.3.3 (this thread is rather old and people don't seem to answer it anymore)
Please any help will be so helpful.
nobody can help me? Seriously?
My friend, take it easy. I have an international version of the i9000 on puerto rico, and there is absolutely no way of anyone being able to help me, yet, I managed to customize my phone and love it.
First off, rooting is no complicated science. In fact, its incredibly simple, and pretty safe these days. Heres the best article for rooting your android. http://lifehacker.com/5789397/the-always-up+to+date-guide-to-rooting-any-android-phone
All you need to know is there. Also, is your 3 button combo damaged? You dont need to apply the fix if you can get into download mode. you do so, by pressing Volume down + Home + power while the phone is shut down. It should take you to the download mode screen.
You do not need to modify your phone much yet. If youre confused, chances are youre overwhelmed by the information. I got reckless myself with my phone and bricked it. Thankfully i got a new one, but you should be real careful. Just root, and read up. Then when you think youve learned enough I recommend you flash a new kernel, a custom one that has the fixes you need or want. but for now, rooting should get you the GPS fix and others, so just root, and look for the apps that can fix your phone. Good luck!
Hey, pretty newbish myself so hope this isn't like the blind leading the blind! Figured I could help with a couple of your questions though.
1. Odin3 v1.3 does work. I got that version and flashed speedmod to my i9000m no problemo. It did all the things it was meant to as per instruction threads/guides (ie the yellow COM box when connected in DL mode, the green Pass! when flashing complete etc)
2. I used SuperOneClick to root my phone before that and it wasn't too big a deal, but since learned that I could have just flashed the speedmod kernel and used that to root my phone by going into recovery mode and using the root option there.
so am not far ahead of you - i'm trying to currently work out which (if any) custom rom to try out.
oh - one glitch in all of this - i seem to have lost my ability to turn GPS on somewhere along the way (don't really use it so only discovered it recently - trying to find out how that happened and how to fix it!); otherwise all good!
make sure you have the 3 button combos!! wasn't sure by your post if you def did or not. assume you can
a) hold vol up/home/power to get into recovery mode;
b)hold vol down/home/power to get into DL mode?
OP - does your 3 button mode download/recovery not work?
Vivasanti said:
OP - does your 3 button mode download/recovery not work?
Click to expand...
Click to collapse
My 3button combo does not work, like I believe a lot of the I9000(T), that is why the 3 button combo fix is around. In the Wiki they talk about rooting but they advise to fix the 3 button combo first, but when I when to one of the fix, they said I need to be root first, hence my questions.
caribbean_spur said:
My 3button combo does not work, like I believe a lot of the I9000(T), that is why the 3 button combo fix is around. In the Wiki they talk about rooting but they advise to fix the 3 button combo first, but when I when to one of the fix, they said I need to be root first, hence my questions.
Click to expand...
Click to collapse
Did you try rooting with super one click? In the link I posted you can find it. Rooting is very simple. You do not need to have the 3 button combo for it. Unless you want to flash a custom kernel or something. So read up my first post, the rooting guide and follow it. Its very safe. If your phone is not rooted with that, then look for a way to fix your 3 button combo. I suggest however to be real careful with that, since I bricked my phone doing just that, the first time.
1. BEFORE ROOT! Get to download mode. If combo doesn't work, get yourseld a JIG. REALLY!! No joke! Google it on XDA.
2. Read this.
[GUIDE] Getting the most out of your SGS [UPDATED: 28.02.2011]
http://forum.xda-developers.com/showthread.php?t=939752
3.
http://forum.xda-developers.com/showthread.php?t=723596
4. http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
Australian Virgin Froyo 2.2 3BR Fix?
Hi there,
I'm currently going through the same thought process. I stumbled upon Richtofen's method for installing the 3BR fix: http://forum.xda-developers.com/showthread.php?t=785201
However the link to that thread no longer works - I was stumped by the updated Heimdall method (http://forum.xda-developers.com/showthread.php?t=821698) when it said to check the partition for a certain string - which required root.
I wanted to go back to the Odin method, as I managed to find a user who had exactly the same phone and firmware as me:
Firmware version: 2.2
Baseband version: I9000DTJP3
Kernel version: 2.6.32.9 [email protected] #7
Build number: FROYO.DTJP5
Anyone have success with this model/firmware setup and managed to resurrect 3BR?
Cheers,
Xav.
xavieda said:
Anyone have success with this model/firmware setup and managed to resurrect 3BR?
Cheers,
Xav.
Click to expand...
Click to collapse
Has anyone managed to get 3BR working on their SGS1 recently?
Xav.