Related
Hello guys!
I m a very happy user of my diamond and this forum...
I was wondering if there is any application that would allow to record using and external mic , plugged in via a usb - 3,5mm jack for example.
Then i can stop carryin my Iriver h340 thats getting pretty heavy!
Isn t there a tool that can also update date and time automatically ?
Thanks in advance and big up for all the cookers!
As far as I know, the Notes application is able to record from an external mic just like the fixed mic. Just go to Menu > View Recording Toolbar.
There are several applications to sync the time, can't think of any off the top of my head.
The supplied headset has an external mic in it, you should be able to hack into it and solder on a jack socket, then plug in any mic. In theory you should also be able to do the same with a BT headset.
You need "synchrotime" to correct time and date via the internet.
these were quick answers!!
I was more thinking about recording rehearsals and concerts , so more like a dedicated application were u can choose the sample rate m and also the format for ex wave or mp3 plus a gain control...
ttttthhhhhhhhhhhhhhhhhhhhaaaaaaaaaaaaaaaaaaaaannnnnnnnnnnnnnxxxxxxxxxxx
Pardon me for digging up old bones, but I've been searching for an answer to this for a bit now...
Like the OP asked, is there an app out there for recording audio from an external mic plugged into the 3.5mm jack? I own a Samsung Galaxy S (Fascinate) and know that the hardware side of this topic is covered.
The only "Notes" application I have is notebook. I have audio recorder, but that doesn't have any such settings to choose from an external audio source (and I've tried to see if it just switches to that source if it is plugged in, no luck).
This would make life so much easier for me if I could pull this off. I'd pay for a decent app that covered that.
Wanderingandroid said:
Pardon me for digging up old bones, but I've been searching for an answer to this for a bit now...
Like the OP asked, is there an app out there for recording audio from an external mic plugged into the 3.5mm jack? I own a Samsung Galaxy S (Fascinate) and know that the hardware side of this topic is covered.
The only "Notes" application I have is notebook. I have audio recorder, but that doesn't have any such settings to choose from an external audio source (and I've tried to see if it just switches to that source if it is plugged in, no luck).
This would make life so much easier for me if I could pull this off. I'd pay for a decent app that covered that.
Click to expand...
Click to collapse
In a twist to this question/ request.
I am and have been looking for an app also that will be able to utilize the external mic 3.5 mm jack to record audio to the built-in video application.
NATIVE! not hacked or Jerry-rigged. I tried this by plugging in a headset /mic to the external mic port on an EVO and HTC Incredible and it still seemed to use the regular mic on the phone not the 3.5 mm jack.
I'd like to use my incredible/ EVO/ (and rumored HTC Incredible HD) to be able to connect a lapel mic with transmitter and receiver so audio sounds local without echo from a distance.
Plus I could have 2 people miced up and one video camera.
There is no reason why this shouldn't work.
We are not talking power just software access.
If the notes apps uses it to record why can't the video app use the same port.
Bodeen3
External Mic and Video
Wanderingandroid said:
Pardon me for digging up old bones, but I've been searching for an answer to this for a bit now...
Like the OP asked, is there an app out there for recording audio from an external mic plugged into the 3.5mm jack? I own a Samsung Galaxy S (Fascinate) and know that the hardware side of this topic is covered.
The only "Notes" application I have is notebook. I have audio recorder, but that doesn't have any such settings to choose from an external audio source (and I've tried to see if it just switches to that source if it is plugged in, no luck).
This would make life so much easier for me if I could pull this off. I'd pay for a decent app that covered that.
Click to expand...
Click to collapse
In a twist to this question/ request.
I am and have been looking for an app also that will be able to utilize the external mic 3.5 mm jack to record audio to the built-in video application.
NATIVE! not hacked or Jerry-rigged. I tried this by plugging in a headset /mic to the external mic port on an EVO and HTC Incredible and it still seemed to use the regular mic on the phone not the 3.5 mm jack.
I'd like to use my incredible/ EVO/ (and rumored HTC Incredible HD) to be able to connect a lapel mic with transmitter and receiver so audio sounds local without echo from a distance.
Plus I could have 2 people miced up and one video camera.
There is no reason why this shouldn't work.
We are not talking power just software access.
If the notes apps uses it to record why can't the video app use the same port.
Bodeen3
Way to record audio on Android using external mic
Hi.
You have to buy adapter which will split the signal for microphone in and audio out (you probably know 3.5 jack in your phone is 2 directional as it supports headset with mic)
You can try to look for it on Amazon (headset buddy)
or solder into headset in the pins which are responsible for mic signal.
Then,
I know only 1 app for android which supports recording from external microphone:
Arabela Audio Recorder - choose DEFAULT audio source and it should catch the signal from external mic connected through adapter via 3.5 jack.
I THINK it can catch the audio while recording video because it works in background ... so later you will be able to remove the audio from video recording and join it with the one you recorded using Arabela with some kind of video editor
regards
If you need a adapter for the phone, then check what i did here in this thread:
http://android.stackexchange.com/qu...se-a-external-microphone-with-my-galaxy-nexus
There are also link to a app which can record video with the external microphone
simonbove said:
If you need a adapter for the phone, then check what i did here in this thread:
http://android.stackexchange.com/qu...se-a-external-microphone-with-my-galaxy-nexus
There are also link to a app which can record video with the external microphone
Click to expand...
Click to collapse
I think any mic with 4 pole jack should work without any adapters. Like the one's used on iphones etc. Check on ebay for iphone microphone. I ordered a cheap one $1.80 just to test on my SGSII but im 99% it's going to be working. There are some high quality for about $30 as well. Like this one HERE
Just incase anyone out there is wondering if the bluetooth wireless speaker Sony MBS-100 works with the legend, yes, it does. Complete with volume control on your phone working fine (doesn't work on iphone). I'm glad I can still use this with my new phone.
Using Azure 1.01, stock music application.
What can you say about the sound quality?
Sound quality is just as good as it was on my old Sony Ericsson.
If you were curious to the speaker yourself, it's got great frequency range and a nice even sound, though top volume could be a bit more on some devices(fine on Legend)
It also doubles as a bluetooth receiver for larger stereos, as the 3.5mm in also doubles as an output.
Hi Folks!
Recently got a bluetooth FM transmitter so i can go hands free in the car and use phones music player too
However the audio is very heavily compressed when using A2DP - no bass and the top end frequencies turn to mush - ie not good enough to use
Checked all eq settings and different FM frequencies, no difference
plugged the analogue audio cable direct from the phone to the bluetooth FM transmitter and immediately got perfect sound again
I dont see many poeple talking about this on this forum or many answers but the closest seems to be windows phones can access and modify registry settings to check and increase the bitrate
My current thinking is the bitrate (or bitpool) over bluetooth A2DP is set too low, or when the phone and FM transmitter pair the phone selects a bitrate that's too low for quality audio (but ok for calls)
My question is does anyone know how modify the bitpool settings on the Galaxy S please?
I am going to get a custom ROM and will very happy when the phone is really mine so if that's what it takes I'm up for it
Many many thanks!
DJ LIBRE
Samsung Galaxy S
2.1.1 Eclair on 3 mobile network in the UK
Nexus Drive Transmit Pro (Bluetooth FM transmitter music and hands free car kit)
I have the Galaxy S on 3 UK since August. I use the bluetooth to transmit sound to my Samsung surround sound system (as I don't own a stereo). I don't notice significant quality issues doing this. Are you sure both your devices are supporting A2DP. Not all A2DP devices talking nicely with each other, so you may be failing back to the normal Bluetooth frequencies which are more focus of the vocal range. I'm looking a car stereo's right now that support A2DP so I can stream my audio from my phone straight to my stereo, my phone is becoming the centre of my entertainment!!
I'm running Doc's ROM on my phone, can't recommend moving to his Froyo ROM's and an enhanced kernel enough, my phone is working so much better with his ROM, but there are lots out there to choose from.
I am using A2DP in my car too and I find the sound quality being very good.
The thing is, the default Android audio player (Music Player) is pretty poor and often it lags for me.
Since I moved to MiuiMusic (Search here) all those lags are gone and it works perfectly and smoothly in my car.
Now, as pointed already to you, all BT devices do not communicate flawlessly between each other sometimes...
works great for me, streaming from the SGS to the car CZ 509 deck
i don't even carry CDs in my car anymore
even the lovely sub base sound comes through clearly.
nothing better like a Sonic Massage meanwhile you are driving
I wanted to create a new thread on this, but then I've seen this one. Is there no one with a solution except flashing cyanogen?
It could be a setting on your bluetooth receiver.
For example, I've got a pair of Sony DR-BT21G bt stereo headphones. When you hold a special button combination, it switches it from "high quality" to "any quality", and will just select whatever bitrate it thinks is best, usually, something that sounds about half as good.
Try looking in your manual for troubleshooting and see if there are any settings that you can change on the receiver itself?
awojtas said:
It could be a setting on your bluetooth receiver.
For example, I've got a pair of Sony DR-BT21G bt stereo headphones. When you hold a special button combination, it switches it from "high quality" to "any quality", and will just select whatever bitrate it thinks is best, usually, something that sounds about half as good.
Try looking in your manual for troubleshooting and see if there are any settings that you can change on the receiver itself?
Click to expand...
Click to collapse
Hmm, i using Sony MW600 BT headphones. I've checked the manual, but there's nothing about quality :/
But i dont think that's the problem anyway, as i tried Cyanogenmod and it got perfect quality then. But otherwise cyanogen is quite useless for me on my Galaxy S, its just too buggy. There must be someone who can change the bitpool quality on the stock gingerbread to the highest possible...
Exact same issue for me (as described by DJ LIBRE), I have a Belkin Wireless Bluetooth Music Receiver and the sound quality is horid... it's got nothing on AirPlay which I think is still kind of average quality!
I also wonder if there is a highbitrate setting that can be adjusted?
Running CyanogenMod Nightly #130 on SGS.
After getting used to listening to 24/96 FLAC's with the Voodoo Sound mod enabled with a custom built headphone amp and semi decent can's all I can say is BT Audio is a waste of time!
Has anyone noticed whether the music player was set to 5.1 surround mode? Had a similar issue where turning off the 5.1 fixed the sound streaming...
hello, I did this stuff here Alfa Romeo & Galaxy Tab integrating seamless the tab and my dashboard.
The overall result is very good, except for the audio volume, and being not an audio expert I fear that this is an impedence problem.
To make it very short, I just connected the headphone plug with the inputs of a 50W ("rms", real 50 watts they say, not fake 50w as standard OEM car audio), a kenwood KTP-500 thing. The problem is that the max volume is VERY VERY low in comparison to whatever oem standard ****ty car audio device, and that is quite impossible to me, and also for audio tuning shop owners I enquired for some advice.
So I think I need to convert, somehow, the signal to be good for the amplifier.
The amplifier has got switch between "low gain and high gain" but it does not change that much.
So I've got 2 plans to get an at least "normal" audio volume, amplifying the signal with some kind of "line amplifier", or find a guy (perhaps here? ) who can explain me the setup error, so that I can fix it. Shouln't be that difficult, but I'm ignorant in this stuff, and surprisingly, neither do know the people that works at kenwood/alpine/whateverBlingBling-audio shops in my city.
I also tried to debug my installation connecting a PSP, some other phones, a small television, an old cd player... all with the same low-volume result. So it's not a GalaxyTab (p1000, the good 'ol one, since it's exactly 2din fit) issue, but more general, having knowledge in audio signals may help...
So what is the point with connecting directly an earphone jack to the inputs of an amplifier? It's so amazing after 1 year having the tab as audio unit, it's a shame to have this volume issue è__é thanks for any clue
p.s. the audio quality is excellent, anyway, no buzz, humming or distortion. It's only... too low
I have the same problem, the volume is very very low, especially in a telephone conversation using speakers. However the sound quality is excellent. The problem is that you can not have a conversation without a headset ,when youare in a opne place.
I know a lot of you are anxiously awaiting the voodoo port to our phone but I just wanted to let you know, in case you hadn't heard, that even our stock ROM supports external, driverless DACs and amps. I am using an ODAC and O2 headphone amp but I confirmed FiiO E7s also work so I presume any high-quality DAC will hook right up.
I just got an OTB host adaptor (micro to full size USB), plugged my DAC/amp into the USB and told the ROM (settings>Accessory> Audio Output mode (checked to use external speakers when plugged into a dock) and told the HDMI output to use stereo since I have only two ears and use headphones at work.
The sound, once you've bipassed the DAC internal to the phone is, as you might expect, exemplary- eerily crystal clear and quiet with outstanding dynamics. Since the ODAC is very efficient and the E7 is internally powered neither solution should have any major effect on battery life. Once you've heard an external DAC on this phone you'll feel as sad if you have to use the headphone jack again as you no doubt felt when you tried to use an old "tiny" phone as getting your GN2.
I was quite disappointed with the (for me) relatively poor pen support (I was expecting Newton - like integration), the missing multi-tasking, etc but this feature makes up for it all- if you like music, try it and I guarantee it'll bring a smile to your face whatever else is going on with your day. Poweramp and Music, by the way, support 320k VBR, FLAC and lossless AAC no problem- it just sounds wonderful.
Interesting! I've been really surprised at how great the sound is just using bluetooth audio in the car. Can you provide links/ specific models for these items? Found the FiiO E7 on Amazon, not bad pricewise. I have an OTG thingy I have used with my Nexus 7 but haven't tried it yet with the Note2. I'm using KKR headphones at home and could see going portable with the right setup. Also not above putting stuff together in a box, been playing with Arduino's lately.
Also, assuming the Note2 is the center of my future portable sound world (just got the 64G Sandisk at Best Buy) what format would you recommend for ripping my CDs? I brought some to work today to rip while working but haven't really looked at the various lossless solutions. I would like to get some kind of replaygain-like functionality. Currently using DeadBeef for my player but open to the best solution there too.
I use the fiio e17 . you need a great pair of cans to basically get the best sound.
(I am working on a project to create and 3d print a case that will contain the phone and the fiio. will keep you posted.
I finally tried connecting my Hot audio Dac destroyer (want to get a new dac) to this phone and it seems to work! Used it with my Akg q701's so I think I also need an external amp.
If the sound is coming out of the dac's headphone out is the internal dac of the phone bypassed or if not how do we do so?
guisar said:
I know a lot of you are anxiously awaiting the voodoo port to our phone but I just wanted to let you know, in case you hadn't heard, that even our stock ROM supports external, driverless DACs and amps. I am using an ODAC and O2 headphone amp but I confirmed FiiO E7s also work so I presume any high-quality DAC will hook right up.
I just got an OTB host adaptor (micro to full size USB), plugged my DAC/amp into the USB and told the ROM (settings>Accessory> Audio Output mode (checked to use external speakers when plugged into a dock) and told the HDMI output to use stereo since I have only two ears and use headphones at work.
The sound, once you've bipassed the DAC internal to the phone is, as you might expect, exemplary- eerily crystal clear and quiet with outstanding dynamics. Since the ODAC is very efficient and the E7 is internally powered neither solution should have any major effect on battery life. Once you've heard an external DAC on this phone you'll feel as sad if you have to use the headphone jack again as you no doubt felt when you tried to use an old "tiny" phone as getting your GN2.
I was quite disappointed with the (for me) relatively poor pen support (I was expecting Newton - like integration), the missing multi-tasking, etc but this feature makes up for it all- if you like music, try it and I guarantee it'll bring a smile to your face whatever else is going on with your day. Poweramp and Music, by the way, support 320k VBR, FLAC and lossless AAC no problem- it just sounds wonderful.
Click to expand...
Click to collapse
This is relatively widely known, there is a USB audio thread here and it is mentioned in the Sound Quality thread here in the Note 2 subforums
I demonstrate it in the video below, and also did the same in my S3 video of the same kind. I'm using an RSA Intruder with mine, and get the Leckteron UHA-6S.MKII in the post in a few days to try out as well.