i tried to install custom rom and before that wanted to install cf-root on galaxy tab ...
I have a tab gt-p1010
can anyone advise pls,all i get when i try to access download mode is blank screen light doing nothing,as soon as i let go power button ut turns off
any help is appricated
djarben said:
i tried to install custom rom and before that wanted to install cf-root on galaxy tab ...
I have a tab gt-p1010
can anyone advise pls,all i get when i try to access download mode is blank screen light doing nothing,as soon as i let go power button ut turns off
any help is appricated
Click to expand...
Click to collapse
Congrats, You've very likely bricked your Tab. You have a wifi only model which has different hardware to the roms here. In future read before you walk.
Enjoy!
TheATHEiST said:
Congrats, You've very likely bricked your Tab. You have a wifi only model which has different hardware to the roms here. In future read before you walk.
Enjoy!
Click to expand...
Click to collapse
i did follow notes here...
And u came here to tell me that, i think u bricked u character already ..i need help not people like u....thx for u help anyway
djarben said:
i did follow notes here...
And u came here to tell me that, i think u bricked u character already ..i need help not people like u....thx for u help anyway
Click to expand...
Click to collapse
does the pc recognise the tab at all? Sadly TheATHEiST is almost certainly correct in saying you've bricked the tab.
He is also correct in saying that you really should have read the instructions. Yes, really. If you reply and say you did follow instructions, please post a link to said instructions.
The roms are for the 3g tabs.
as far as I know, no one has made a custom rom/kernel for the wifi only tab. Its not the same because your wifi tab has different components compared to the 3g tab.
stoney73 said:
does the pc recognise the tab at all? Sadly TheATHEiST is almost certainly correct in saying you've bricked the tab.
He is also correct in saying that you really should have read the instructions. Yes, really. If you reply and say you did follow instructions, please post a link to said instructions.
The roms are for the 3g tabs.
as far as I know, no one has made a custom rom/kernel for the wifi only tab. Its not the same because your wifi tab has different components compared to the 3g tab.
Click to expand...
Click to collapse
+1 ..
he remind me by someone bricked his tab because he flashed overcome over P1010 and even there is BIG note in overcome says DO NOT FLASH IF YOU P1010 .. and he replied me back , owh really i missed this
to the OP you see like Stoney says , check if your pc can still recognize your tab , if not , congrats you bricked your tab ... the nearest samsung service center will fix it for u hope u under the warranty , if so , u just say ( what is happened to my tab , i slept at night and i left it on the charger , i woke up i found it like this DEAD ) what makes my tab DEAD ? ? with some action acting with drama , u probably will fix it under the warranty ...
NOTE : this is not the right place for posting Question ...
good luck with SAMSUNG and don't forget the much drama u got the much u'll success to convince them
who agree with me , THUMBS UP
djarben said:
i did follow notes here...
And u came here to tell me that, i think u bricked u character already ..i need help not people like u....thx for u help anyway
Click to expand...
Click to collapse
No point in crying, I was been blunt with you because you have nobody to blame except yourself.
If you had READ the topic(s) properly you would NOT be in this situation. You have flashed a software to your device that has a different bootloader then yours, hence you've bricked your device.
If your device is new you should take it straight back to the shop and plead dumb, say you put your device on charge and next day it wouldn't turn on properly. Alternatively say you tried to update it via Samsung Kies.
If they refuse to fix for you then you will need to pay for JTAG repair.
Congratulations, you have learned the hard way, next time learn the easy way and read properly.
TheATHEiST said:
No point in crying, I was been blunt with you because you have nobody to blame except yourself.
If you had READ the topic(s) properly you would NOT be in this situation. You have flashed a software to your device that has a different bootloader then yours, hence you've bricked your device.
If your device is new you should take it straight back to the shop and plead dumb, say you put your device on charge and next day it wouldn't turn on properly. Alternatively say you tried to update it via Samsung Kies.
If they refuse to fix for you then you will need to pay for JTAG repair.
Congratulations, you have learned the hard way, next time learn the easy way and read properly.
Click to expand...
Click to collapse
+1 my thoughts exactly ..
Related
i tried to downgrade my Samsung galaxy s i9000 with this guide:
theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/ (copy & paste in the address bar)
but in the middle of the flashing the ezodin just stopped and got stuck (during the file "factoryfs.rfs")
so i have waited something like an hour and a half but it didn't help so i did what my friends told me and shot-off my SGS then when i tried to power it on again it just stayed like it's off- black screen, wont light, wont go either to download or recovery mod
what should i do!?!?!? even when i eject the battery it won't turn on!!
please help me !!! im clueless and my dad will kill me if i'll tell him
please help me!!! im sorry that i kinda spamming this thread nut i must figure it out
Read this thread. Maybe it might help.
yea its bricked too bad.. but dont worry try usb jig(search it here in xda)..i'm sure ur problem will b solved
hard brick
Hello
it looks like you r hard bricked.
your bootloader is toust.
you still can fix it with riff jtag.
look it up
hope it helps.
I also bricked my captivate.
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
xpboy7 said:
hi mike i'm from israel too[= do u know any store that sells that "jig" thing?
Click to expand...
Click to collapse
you can get it on amazon or they are very easy to make with basic soldering skills
it started when i wanted to upgrade my galaxy tab to 2.3.3 gingerbread but something went wrong on oden and my galaxy stucked at screen of death (that screen that has a mobile icon pc and an exclamation mark) anyway i got out of it using hiemdall but now iam stucked at adroid system recovery 3e how to go back to the OS and also i can go to download screen ......
thnx (sorry for disturbance)
guys 85 views and no answer plz i need help
Well I can tell you how to completely brick your tab but I, probably as well as most of the people who viewed your post, don't know how to fix...
Doesn't take much to view a post, less to give bad advice... Requires patience to get the person who can help, to find your post and answer...
You also have a cdma tab, i believe, that's bad as most people have the gsm variant. It also means that steps I take to rectify your problem on my tab will probably brick yours...
Now, would you like me to tell you how to fix MY tab???
Also, no idea what you were on, what you were trying to flash, rooted or unrooted, locked bootloader check done and cdma, wifi-only or gsm??? We need this information before we can help.
thnx for your reply ultra. my phone is gsm (the one that i can insert sim card) and its rooted and i was updating to ginerbread when oden stucked at factoryfs and failed and it bricked i used hiemdall to skip the pc screen and go to download screen so what can i do know ????????
thnx in advance
1st thing I'd do is get my stock froyo rom... The one that came on the gtab. reflash that and then try again from there if successful...
You night find your stock rom here on xda or you might need to go further afield like samfirmware. I'd also, if back on stock rom, test to make sure my bootloaders weren't locked otherwise you may end up here again....
bootloadercheck/patch can be found in this thread - http://forum.xda-developers.com/showthread.php?t=888071
Cheers...
thnx for the replay but there is a prooblem that happened yestarday my galaxy tab wont start while out of charger but while in charger it shows that pc thingy screen if you may help i apperciate it thnx
big trouble said:
thnx for the replay but there is a prooblem that happened yestarday my galaxy tab wont start while out of charger but while in charger it shows that pc thingy screen if you may help i apperciate it thnx
Click to expand...
Click to collapse
Did you check to see if you had a locked bootloader before attempting to flash?
Which rom/guide did you use/follow?
Have you tried the Overcome rom/guide?
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
kunalteji1993 said:
Hello there,
I just bought a galaxy note <well a week ago> and now i ended up soft bricking it.
here's how i did it -
I went to my friends place thinking of rooting my phone while he told me to add a custom rom to it . well since he was experienced i let him do it . he added a firmware of i9200(chinese ). well it worked now i found some chinese system applications that i didn't need and while searching on net how to do it i found a firmware of n7000 ics online and decided to flash it in. since i was at home i thought i would be able to do it myself and did what i shouldn't have done. i followed every step they said online and started the downloading of the rom but unfortunately when pc odin was at it's end i mean the end of downloading i actually disconnected the cable ( what the f*** was i thinking) . now i tried to reinstall the same rom but couldn't - pc odin always showed setting up connection or something like this and then stalled for hours ... i thought of flashing some other rom but it didn't - same thing <stalling for hours> . Now what should i do??? help me - maybe i can go to samsung customer care service and ask them to reset my phone but since the usb debugging was on last time when i turned my phone off , kies might not do the job . can u suggest me a way.
one more thing i can't flash stock rom into it and <i am dumb> i didn't backed up my stock rom.
p.s. my flash count is 2 . i can't load my phone into recovery mode but can into download mode and can't do it with a jig (am from india plus i am a little low on technical know how).
i can't hard reset it either. a suitable help would be appreciated ,pls
Click to expand...
Click to collapse
I have no experience with this, but I did keep this video link on how to put a bricked Samsung into download mode just in case I needed it. The usb jig is the same for both the captivate and the Note from what I have read:
http://androidforums.com/captivate-...ung-captivate-usb-jig-video-start-finish.html
If you are able to enter download mode then Just try with different version of PC Odin , like V1.83, V1.85, V1.87. and do not worry about Stock ROM you can always download it from below link.
http://forum.xda-developers.com/showthread.php?t=1329360
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
kunalteji1993 said:
thankyou guys but i can't use jig since i can't buy it nor am i capable of making one.
Rajan , bro my problem is something different. the roms i am trying to insert in my phone was via the odin i used earlier to flash my first rom. and it went successfully . but last time the second rom i inserted was interrupted during download and am not able to add anymore of them. now i have talked to samsung care and they told me to bring my phone along with the bill maybe they can do it. even though my warranty is done for, but i think i can believe them . yet if there are any other suggestions pls tell me or should i give it to samsung care. I really don't wanna keep my phone rooted so i have no problem flashing stock but it's not happening. CAN KIES HELP?
p.s i have used all 1.85 , 1.87 and 1.83 version no use.
Click to expand...
Click to collapse
I fear your Note is done for, if your PC Odin session got interrupted.
chasmodo said:
I fear your Note is done for, if your PC Odin session got interrupted.
Click to expand...
Click to collapse
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
kunalteji1993 said:
don't say that ... help me my situation is getting even worse now... will i be able to recover my phone!???! help me help me!
Click to expand...
Click to collapse
Dont take it service centre.If you do so also dont say them you flashed custom rom.Then they wont fix it under warranty.Dont worry now.
Try different usb ports,uninstalling drivers and reinstalling it and try again.And as you are noob I recommend not to flash ICS customs at the moment.Stay with GB
I say go to your friend first who rooted your phone then ask him to try the various methods given in the forum recovering from softbrick.
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
kunalteji1993 said:
i have read in some other websites that i will need a pit file to restore my phone + the rom file while checking repartition and auto time fe: reset in odin 1.83 then maybe i will be able to return back to gb . do u think this is ok for me to do .
p.s i live in chandigarh while my friend has moved to gurgaon so no chance to go to his place. and i have talked to customer care and told them everything. they told me to take the phone to service centre and they will help me.
now tell me what are my options!?
Click to expand...
Click to collapse
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
vijai2011 said:
Ok now try to flash abyss kernel with red pill first lets see if it revives the phone.Yeah you are right pit file is required when you tick repartition and auto reboot and f.reset must be ticked all time.
Click to expand...
Click to collapse
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
kunalteji1993 said:
wait . what? what is this red pill and all .. i think you can save me but i would liike you to brief me about the procedure plus i read this - i need a (wipe) rom to be able to reflash my rom or something like this .
p.s i am still downloading my firmware ...
but would be better if i get the info i need before hand!
Click to expand...
Click to collapse
its a kernel with a custom recovery.Its like CWM(Clock Work Mod).You could find it in the development section.Download the kernel.Could you get into recovery mode by turning off the phone,holding "vol up+home button+powerbutton"?
---------- Post added at 09:08 AM ---------- Previous post was at 09:00 AM ----------
kvsandeepreddy said:
dude.. don't panic... I don't think ur phone is dead... best is to buy a jig... try on eBay... I got it for 200rs in eBay... I don't think that's a big deal for any one with a note .. I bought it even before experimenting because I thought some thing like this might happen....
its safest way to remove the triangle and get into recovery mode... as somebody else suggested flashing red pill also works ... search in development section for abyss kernel... ull find it...
Click to expand...
Click to collapse
No need for jig because he can enter DL mode.And did using jig removed the yellow triangle for you
thanx guys for helping and current updates ---
i am in 12 th so untill my entrance exams are over i won't get to have the phone in my possession since my dad has it now ... so maybe after they are over i will continue on my quest to get it corrected!
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
how did you fix it? this may help some else in the future
ratcom said:
how did you fix it? this may help some else in the future
Click to expand...
Click to collapse
service centre guys....remember he/she saying in pm
kunalteji1993 said:
well my note is all well except one thing. now whenever i connect note to kies it shows kies dpn't support upgrading of my device. my kernel is lc1 (inu)...
help pls?
Click to expand...
Click to collapse
wenn connecting to Kies at firmware Kies says something like LC1. lb2 (XXX) as product code? if so they have changed the board on the service center and they haven't activate the Pcode on your phone google "Pcode not active" you will find few posts till now only ppl from Germany had it who send their phones to service center via Saturn/Media Markt ist guess it was/is a technician you was sleeping on the seminare/briefing how to change the board on Note. hope it will help you if it is that try to replace your phone, had the XXX Pcode after service center got a replacement. after a month of arguing with the salesman.
Sent from my GT-N7000 using Tapatalk 2
Uninstall the Odin in your PC and install it again to see if it works.
i am pretty much sure that they didn't change the mother board. they must have added the firmware that's all as my mboard wasn't damaged at all , it was just that the battery failed when i gave it to samsung people that's why my phone overheated when they charged it and that's when the battery must have been destroyed maybe due to that overheating they must have thought to change mboard (but they didn't cause those engineers must have changed the battery prior to examining my phone for the problem). AND i didn't have pc odin on my THIS pc to start with. it was in my laptop and kies didn't even reckoned my phone there well that's why i installed kies on HERE . i guess service center people can update it the same way they installed this firmware here..... what do u suggest?
AND Braxos Pcode is active --- it's something :
GT-N7000ZBAINU
and no, the current firmware info kies shows is something like ---
N7000DDLC1/N7000ODDLC1/N7000DDLC1/N7000DDLC1(INU)
(now i think they have done something wrong - it's all n7000ddlc1 here. what is this? )
GUYS can u also tell me what does your firmware version shows (just for reference , pls do it!)
p.s my phone is still in warranty since they fixed my phone free of cost plus they also replaced the battery for free . before my phone was sent to service center my phone had a flash count of two yet they fixed it under warranty(yay!).And thank you everyone!
MY ADVICE TO NEWBIES----
If your phone is soft bricked and you don't know what to do and you think you will make the matter even worse then don't do anything to permanently brick it . you guys should go to service center , they might even fix it for u for free just like they did it for me!
Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?
Check your drivers on your labtop and retry to put the GS in download mode
Try going in recovery system and do all three wipes...
Sent from my SGH-T959 using Tapatalk 2
I can't do anything i cant go into download mode and i cant go in to recovery mode i cant do ****
Any button i press wont do anything to turn on my SGS
I don't even see any backlight
is this worrying
I guess u hard bricked ur phone then...
Now there is only one way..
G
Get a USB jig and with the help of it u can go in download mode.. U can check the video below
http://www.youtube.com/watch?v=1RoZU5ZPMS4&feature=youtube_gdata_player
Proud owner of SGS GTI-9000.
I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).
Dustman317 said:
I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).
Click to expand...
Click to collapse
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..
@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
mizzeeboy said:
@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
ohhh... srry my bad..
I did the same mistake when i rooted my phone for the first time..
and i did gave it to samsung and they fixed it..
they chnged the motherboard..
they wont see ur binary resets i guess..
u can try that too better then ripping ur phone off...
i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this
drakester20 said:
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..
Click to expand...
Click to collapse
It's easy you just have to make a bridge between two connectors (OMX5 and OMX0) and after you flash a software. If this manipulation can make my phone like a survivor i can do it ^^
---------- Post added at 12:04 PM ---------- Previous post was at 11:58 AM ----------
Don't worry about that the GS2 has a counter who is incremented when u flash a non official software it's a trick that the constructor used to help the Samsung's technicians to know if you can use the guarantee or not but the GS1 isn't equipped of this system, then it doesn't matter.
so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?
mizzeeboy said:
so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?
Click to expand...
Click to collapse
yeah dude.. they wont know ur binary resets anyway.. if u had sgs2 then they could have figured it out in download mode coz there it is written in download mode..
u can give it a try though...
@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?
mizzeeboy said:
@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?
Click to expand...
Click to collapse
yeah say that u tried samsung kies update and due to power failure or something ur phone got messed up..
BTW i just gave them my rooted and bricked phone and they did it for free..
If my post helped, don't mind hitting THANKS
marlonmrn said:
i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this
Click to expand...
Click to collapse
That did not work for me at all
mizzeeboy said:
Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?
Click to expand...
Click to collapse
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you
dysan0201 said:
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you
Click to expand...
Click to collapse
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?
mizzeeboy said:
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?
Click to expand...
Click to collapse
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS
drakester20 said:
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
Yeah I might want to sell it but i've seen some motherboard Resurrections using riff box i wonder some one might quote me for that job?
My p7320 is hardbricked.
I flashed p7300's recovery by mistake.
No download mode
No recovery mode
Adb cant find device.
Odin is also cant find device.
klovemek said:
My p9320 is hardbricked.
I flashed p9300's recovery by mistake.
No download mode
No recovery mode
Adb cant find device.
Odin is also cant find device.
Click to expand...
Click to collapse
This is Samsung galaxy tab 8.9 tablet forum [P7300 & P7310 & P7320 & SGH-I957],
so your question is in the wrong forum, although I can answer your question
Unfortunately in your situation, you can't do anything to fix it, all you can do is:
take it to a near Samsung store, so that they can fix it for you [they need to disassemble your device to fix it]
I had the same situation couple of months ago, and fortunately the device's warranty was still valid, so they fixed it without paying a penny:laugh:
Good luck
omarainea said:
This is Samsung galaxy tab 8.9 tablet forum [P7300 & P7310 & P7320 & SGH-I957],
so your question is in the wrong forum, although I can answer your question
Unfortunately in your situation, you can't do anything to fix it, all you can do is:
take it to a near Samsung store, so that they can fix it for you [they need to disassemble your device to fix it]
I had the same situation couple of months ago, and fortunately the device's warranty was still valid, so they fixed it without paying a penny:laugh:
Good luck
Click to expand...
Click to collapse
Misprint i make mistake 9320
My mean is 7320
Anyway thx
I will go samsung , this repair really is for free?
I cencern whether it costs. I bought this last week. So it's on warrenty. You, what said to Samsung??
klovemek said:
Misprint i make mistake 9320
My mean is 7320
Anyway thx
I will go samsung , this repair really is for free?
I cencern whether it costs. I bought this last week. So it's on warrenty. You, what said to Samsung??
Click to expand...
Click to collapse
Just tell them it won't turn on. No need to provide too many details about any warranty- voiding activities you may or may not have done.
Does flashing a wrong recovery hardbricks our tab? I mean, it's different from bootloader, so he may still be able to enter download mode.
iZLeeP said:
Does flashing a wrong recovery hardbricks our tab? I mean, it's different from bootloader, so he may still be able to enter download mode.
Click to expand...
Click to collapse
I went out from store just now. He said that motherboard is out. So it need to replace.
So sad. Motherboatd is out of stock in the store. Therefore, it takes a week.
오 영어 하실 줄 아내요
아까 덧글올여떤 basara4eva입니다
klovemek said:
I went out from store just now. He said that motherboard is out. So it need to replace.
So sad. Motherboatd is out of stock in the store. Therefore, it takes a week.
Click to expand...
Click to collapse
At least, it's getting replaced.
iZLeeP said:
Does flashing a wrong recovery hardbricks our tab? I mean, it's different from bootloader, so he may still be able to enter download mode.
Click to expand...
Click to collapse
Yea it does TT