Database Develop

help please!!!

help please, does not start, is this image and can not nor do I reset it or anything, please help me
I installed a version of rom do not know exactly what, and then when I reset my screen appeared an image of it and can not go anywhere!

Reflash it?...

rausvasile said:
help please, does not start, is this image and can not nor do I reset it or anything, please help me
I installed a version of rom do not know exactly what, and then when I reset my screen appeared an image of it and can not go anywhere!
Click to expand...
Click to collapse
omg.. these posts.. seen hundred of these..
Remove the battery, put it back, (vol-, home-button,power) to download mode and reflash with odin.

petzku said:
omg.. these posts.. seen hundred of these..
Remove the battery, put it back, (vol-, home-button,power) to download mode and reflash with odin.
Click to expand...
Click to collapse
Mate, where is your signature gif from? As in movie or something?

I've tried, but nothing stays the same

###***They're lying to you!!! It's BROKEN, throw it away now, quickly!!!!***###
Lol, or you could try this thread and see if it helps (posted in the right forum I might add)

###***They're lying to you!!! It's BROKEN, throw it away now, quickly!!!!***###
NO NO NO Post to me please i building new house from Galaxy bricks >>> Big Big House .
jje

JJEgan said:
###***They're lying to you!!! It's BROKEN, throw it away now, quickly!!!!***###
NO NO NO Post to me please i building new house from Galaxy bricks >>> Big Big House .
jje
Click to expand...
Click to collapse
While I understand the joke, but please spare a thought to the OP. I understand the state of panicky after seeing it, the anxiety and all.
Sent from my GT-I9000 using XDA App

i had d same problem wen i flashed d firmware wrongly. it appears tat u ve bricked ur phone. hold vol down + home button + power button. if any picture comes like an android sweeping out d trash saying downloading. if so then visit samfirmware.com -> samsung android. then select galaxy s I9000. Then it will ask u to sign in. if u are a member then no problem or else register.
see ur country or region then download the firmware u were using. then download the odin and the required .PIT file. flash it. cool. ur phone is back to normal....
if it doesnt go to download mode.................... man u are in big problm get ur motherboard changed. it happened to me. i had to change my galaxy s motherboard.

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.

You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium

hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries

You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2

First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.

There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.

Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk

Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.

vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.

mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...

chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.

firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??

Try a different USB cable?
Sent from my SPH-D710 using XDA

izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.

jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?

jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?

lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

Hard bricked

So i've had a CM9 Beta 1 build on my phone, it was running like a charm past week, so while surfing around internet i've found a flashable zip that makes your status bar look like Jellybean (Specified it works with CM9 Beta 1!) and i've got stuck in recovery bootloop like the last time.
I've tried various way's, one of those was to reflash the ROM or flash a stock ROM from Odin, and it keeped getting stuck on stage VerifyPlatform...
So i've found a thread that fixes all of this mess with a .bat file for computer, and after using it my phone actually died.
I can't turn it on, it's all black..
I think i'm seriously lost...
I'm hoping for exact help that could fix it, not an maybe, i seriously need help! ;(

Kramtoske said:
So i've had a CM9 Beta 1 build on my phone, it was running like a charm past week, so while surfing around internet i've found a flashable zip that makes your status bar look like Jellybean (Specified it works with CM9 Beta 1!) and i've got stuck in recovery bootloop like the last time.
I've tried various way's, one of those was to reflash the ROM or flash a stock ROM from Odin, and it keeped getting stuck on stage VerifyPlatform...
So i've found a thread that fixes all of this mess with a .bat file for computer, and after using it my phone actually died.
I can't turn it on, it's all black..
I think i'm seriously lost...
I'm hoping for exact help that could fix it, not an maybe, i seriously need help! ;(
Click to expand...
Click to collapse
do u have i9001 or i9000?I dont know how to fix it.I would give it to samsung to repair it.

cistamlaka said:
do u have i9001 or i9000?I dont know how to fix it.I would give it to samsung to repair it.
Click to expand...
Click to collapse
It's i9001.
I can't give it to Samsung, it's rooted! D:

Kramtoske said:
It's i9001.
I can't give it to Samsung, it's rooted! D:
Click to expand...
Click to collapse
Did you try pulling out the battery for 15 minutes, then try to get to download mode?

Can u get into download mode?
If my post helped, don't mind hitting THANKS

drakester20 said:
Can u get into download mode?
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
So far i did not pulled out battery for 15 minutes, so i'm not sure if this is normal, but the download mode combination does not work. :/

See HERE,i think it would help you.

Lol.. I accidentally hit the thanks button... maybe u can throw one back...
So I was just gonna reply that he can't get into download mode so this is useless my friend..
If my post helped, don't mind hitting THANKS
---------- Post added at 11:59 PM ---------- Previous post was at 11:58 PM ----------
U don't even get that phone to pc disrupted like connection picture when u try to boot?
If my post helped, don't mind hitting THANKS

i9000 use hummingbird chip .. can use usb jig or if detect as sp5c110, can use unbrickable mod software to revive it (if not detect then have to do hw mod)
i9001 use different chip ie msm8255t .. try the button combination or usb jig to get into download mode. If it detect as qusb_load something then there might still have chance. If still nothing I'm afraid only jtag/riffbox can help.
I once bricked a Galaxy W i8150 (msm8255t) because of wrong bootloader flashed. Usb jig don't work. Had to use riffbox to revive it.

Yeah if jig doesn't work then u gotta replace the jtag
If my post helped, don't mind hitting THANKS

Hello, it's been a while. Thanks for all the feedback people.
I'm not trying to bump or anything, just saying that i've brought the phone to my carrier and played a little dumb game, lied and got it to be fixed. I hope to get good news soon.

Kramtoske said:
Hello, it's been a while. Thanks for all the feedback people.
I'm not trying to bump or anything, just saying that i've brought the phone to my carrier and played a little dumb game, lied and got it to be fixed. I hope to get good news soon.
Click to expand...
Click to collapse
Lols i almost got the same issue with my I9001. I would have blamed KIES...

Bricked phone ?!!

Hello everyone ! Two days ago I wanted to flash the stock firmware on my S6500D and the pc restarted when I was flashing the recovery.img I think..and now the phone shows only the Samsung logo ( but very very veeery low-quality resolution ) with some lines in right, how can I repair it..?

ye, it's a brick. I had the same problem when I bricked mine. At first it had corrupted graphics, after some minutes it didn't boot at all.

There's no way to reflash it..? Without replacing the motherboard , I mean..using the software side.

JTAG

deleted

man, try do self jtag, watch on youtube videos etc, its simply and not expensive and it can repair your phone. if it cant help, just go to mobile center for new board

Fallen_Knight said:
what happened to your phone before flashing stock?
Click to expand...
Click to collapse
he said that the flashing process was interrupted, do you read?

deleted

i heard USBjig is working on our phone to force it in download mode.
maybe you should try it

tekkenl0rd13 said:
i heard USBjig is working on our phone to force it in download mode.
maybe you should try it
Click to expand...
Click to collapse
i read jtag also working on all galaxy family devices. try it, try.

I could give the device to a repair service ( GSMobile for me ) and they could repair it, but I don't want to give money for this device because the screen is also broken and I think in 2 months I'll buy a S3 Mini ( I love S3, belive me ) and if I find a way with a small amount of money to repair the phone I will do it ! But this jig..I also used some JIG for bricked PS3 but it's not the same way.. and I don't know a lot of things about making one for my phone, if you have a tutorial I will do it, but after I get the S3 Mini I'll surely repair this phone, I want to continue developing and searching and helping the other Mini2 owners, it is my first Android phone and it means very much to me.

JIG is only meant to force the phone into download mode. If the JIG works, your device is not hard bricked... Otherwise, I mean, if it is hard bricked, service center will take care of it. JTAG != JIG

I'll try to JIG tomorow , I'm using this tutorial : http://forum.xda-developers.com/showthread.php?t=1604707 , TheWhisp, the recovery.img file wasn't flashed totally, I mean it was about 60%..but the boot.img / system.ext4 ( I Think it was like that ) / other files were flashed with succes.. maybe the JIG will do it for me !

zalukajonet said:
i read jtag also working on all galaxy family devices. try it, try.
Click to expand...
Click to collapse
Thanks.

I've tried the USBJig but the phone doesn't responds in any way, it still remains off..

This should be posted in Q n A not in Android Development.

dei.andrei98 said:
I've tried the USBJig but the phone doesn't responds in any way, it still remains off..
Click to expand...
Click to collapse
bro try check all conections in jig. mayby there is some problem with pins.

LiskatFlow said:
This should be posted in Q n A not in Android Development.
Click to expand...
Click to collapse
There's no such section for Mini2
zalukajonet said:
bro try check all conections in jig. mayby there is some problem with pins.
Click to expand...
Click to collapse
I've tried all possible connections and sometimes the phones turns on ( I mean that the Samsung screen appears ) but sometimes nothing happen ( like when connecting PIN 4 to PIN 5 and this is the jig connection )

dei.andrei98 said:
There's no such section for Mini2
I've tried all possible connections and sometimes the phones turns on ( I mean that the Samsung screen appears ) but sometimes nothing happen ( like when connecting PIN 4 to PIN 5 and this is the jig connection )
Click to expand...
Click to collapse
my friend tell me something mayby usefull. push buttons to go to download mode and connect jig - in the same time. mayby it can help.

zalukajonet said:
my friend tell me something mayby usefull. push buttons to go to download mode and connect jig - in the same time. mayby it can help.
Click to expand...
Click to collapse
It's not working, if I enter in download mode by the buttons the screen shows only a white line, then I connect the jig and nothing happens, the screen remains the same..

[Q] hard bricked galaxy ace :'(

hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?

Y_2_J said:
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Click to expand...
Click to collapse
WRONG SECTION!
To be lazy it's NOT ALLOWED on XDA forums! FIRST READ RULES and then read the posts completely ten times and finally read it again!!! ...and if you understand them, you'll try any modifications
Are your device a available warranty yet? send it to the technical service
...if not, you can say goodbye to your phone

Viper The Ripper said:
WRONG SECTION!
To be lazy it's NOT ALLOWED on XDA forums! FIRST READ RULES and then read the posts completely ten times and finally read it again!!! ...and if you understand them, you'll try any modifications
Are your device a available warranty yet? send it to the technical service
...if not, you can say goodbye to your phone
Click to expand...
Click to collapse
really no way to fix a hard brick ? n i have used it for 3 yrs

Y_2_J said:
really no way to fix a hard brick ? n i have used it for 3 yrs
Click to expand...
Click to collapse
...I'm sorry

Viper The Ripper said:
...I'm sorry
Click to expand...
Click to collapse
what abut jig ?

Y_2_J said:
hi guys
i am sorry if i started a new thread i am new here.................
yesterday i was flashing a rom on my ace using cwm but my due to my laziness of reading the rom turned out be for ace s5830i and now it's not booting i cant access anything neither downloading or recovery mod ........... so is there any way that i can bring dis phone back 2 life or .........
i should just kiss it goodbye :angel: R.I.P ?
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace. Go through the entire thread and you will get to know all the possible solutions. Here is the link,
How to unbrick Samsung Galaxy Ace
I was able to help someone else solve a similar problem today using this guide, so don't worry!
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Do post your result. Hope I Helped

mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace. Go through the entire thread and you will get to know all the possible solutions. Here is the link,
How to unbrick Samsung Galaxy Ace
I was able to help someone else solve a similar problem today using this guide, so don't worry!
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Do post your result. Hope I Helped
Click to expand...
Click to collapse
thanks for the reply but bro i am unable to boot into downloading or recovery mod
any other suggestion ?

Y_2_J said:
thanks for the reply but bro i am unable to boot into downloading or recovery mod
any other suggestion ?
Click to expand...
Click to collapse
Bro, try to follow the guide. Just pressing Vol Down+ Power+ Home button is completely different from preparing your odin, removing battery, connecting phone to computer, inserting the battery and pressing Vol Down+ Power + Home button. This method can, in the best case scenario, force open Download Mode. Give it a try! You have nothing to lose but something to gain. If this doesn't work, guide also provides details on USB Jig which is your last option. Hope I helped

mahithm said:
Bro, try to follow the guide. Just pressing Vol Down+ Power+ Home button is completely different from preparing your odin, removing battery, connecting phone to computer, inserting the battery and pressing Vol Down+ Power + Home button. This method can, in the best case scenario, force open Download Mode. Give it a try! You have nothing to lose but something to gain. If this doesn't work, guide also provides details on USB Jig which is your last option. Hope I helped
Click to expand...
Click to collapse
allright i will try now

Y_2_J said:
allright i will try now
Click to expand...
Click to collapse
Cool! Do post the result

mahithm said:
Cool! Do post the result
Click to expand...
Click to collapse
tried it 2 times now no success u know my phone doesnt even lights up it stays in a switched of kind situation

Y_2_J said:
tried it 2 times now no success u know my phone doesnt even lights up it stays in a switched of kind situation
Click to expand...
Click to collapse
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel

mahithm said:
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Click to expand...
Click to collapse
ok bro is there any chances that a jig might do it ?.... and how does a jig works i know its made of resistors but wat does the resistors do to my phone ?

Y_2_J said:
ok bro is there any chances that a jig might do it ?.... and how does a jig works i know its made of resistors but wat does the resistors do to my phone ?
Click to expand...
Click to collapse
I haven't used USB Jig or even made one, so can't help you here. But you can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped

mahithm said:
@info2shail2010 had the similar problem but he was able to go to Download mode using that guide. Sadly since that didn't work for you, your only option will be USB Jig. If that doesn't work either then buy a new phone
[Q][HELP PLEASE] My phone is bricked by using ThunderKernel
Click to expand...
Click to collapse
No bro... i am not able to go to in download mode... i told you... i was using Vol up + power + home key... i was mistakenly thinking it was downloading mode because it was connecting in Odin..... but u told me that is not downloading mode ... that is RamDump mode..... so .. i also cant go to download mode by pressing Vol down + power + home key.... its dead and not responding.. ....

The USB Jig method is just working for softbricked (it can boot, but looping) phones but can't go to recovery or download mode. So, it's not working for hardbricked phone

iqbal_mahmuda said:
The USB Jig method is just working for softbricked (it can boot, but looping) phones but can't go to recovery or download mode. So, it's not working for hardbricked phone
Click to expand...
Click to collapse
Bro, but the above guide says the USB jig for Samsung devices force the device into download mode so you can flash firmware over Odin and restore it to working order. Are you sure about what you said?

mahithm said:
Bro, but the above guide says the USB jig for Samsung devices force the device into download mode so you can flash firmware over Odin and restore it to working order. Are you sure about what you said?
Click to expand...
Click to collapse
i even saw video on youtube about a hard bricked s3 ,galaxy y, s2 and note n7000 but in the s3 the guy got his phone hardbricked while rooting ..... i got it hard bricked due flashing another handsets rom

Y_2_J said:
i even saw video on youtube about a hard bricked s3 ,galaxy y, s2 and note n7000 but in the s3 the guy got his phone hardbricked while rooting ..... i got it hard bricked due flashing another handsets rom
Click to expand...
Click to collapse
if you have this phone fixed somehow, can you let me updated? i have exactly same condition right now!

rinaldo.jonathan said:
if you have this phone fixed somehow, can you let me updated? i have exactly same condition right now!
Click to expand...
Click to collapse
allright it might take some time cause i dont hve money to buy the jig right now my pocket money is empty so it will take me sometime but i will let u know