Database Develop

[Q] dead????

tried to flash a different galaxy s firmware to my captivate thru download mode and it went to reboot but did not come back on the other day and now i cant get the phone to turn on at all. is there a fix or is it a $500 brick???

Different Galaxy S firmware meaning not a Captivate cooked rom?

straightup firmware from samfireware.com. have NEVER had a problem.

steveo314 said:
straightup firmware from samfireware.com. have NEVER had a problem.
Click to expand...
Click to collapse
But wrong bootloaders = brick, soft or otherwise. Try a jig to get into download mode.

Samfirmware has nothing which will work on your phone.
I'm looking to do some experimental non-invasive recovery on bricks and I need something to test. If you'd like, you can send it to me for some analys and it could help the entire community... or you can send to connexxion2005 for jtag recovery.

steveo314 said:
tried to flash a different galaxy s firmware to my captivate thru download mode and it went to reboot but did not come back on the other day and now i cant get the phone to turn on at all. is there a fix or is it a $500 brick???
Click to expand...
Click to collapse
If you can't get download mode probably bricked.
Sent from my Samsung Captivate using Tapatalk

AdamOutler said:
Samfirmware has nothing which will work on your phone.
I'm looking to do some experimental non-invasive recovery on bricks and I need something to test. If you'd like, you can send it to me for some analys and it could help the entire community... or you can send to connexxion2005 for jtag recovery.
Click to expand...
Click to collapse
im going to try the JIG first then ill probably check into the JTAG.....
just to double inform you guys this is the same issue i have.....
http://www.youtube.com/watch?v=jfkPHQbBcJ4

PM sent I can fix this for you quickly. It sounds like a hard brick. Adam, I'll get you that test board sooner or later! Just sitting on my desk.

steveo314 said:
im going to try the JIG first then ill probably check into the JTAG.....
just to double inform you guys this is the same issue i have.....
http://www.youtube.com/watch?v=jfkPHQbBcJ4
Click to expand...
Click to collapse
After watching your video, it looks like a hard brick. A jig will not help. You need to consider JTAG, invasive or non invasive.
Good luck.
Sent from my GT-I9000 using XDA App

Please post in the proper Q&A threads after searching. You would have found your answer alot faster.

Warning 10.1" CWM incompatibility - BRICKED!

Tried to install CWM from market as Galaxy Tab 10.1. The tab is bricked, if you choose to boot into recovery you will get sutck in an endless loop of reboots. With a little effort and connecting the tab to a PC you can get back to the choice menu and enter download mode.
You have been warned!

Bec07 said:
Tried to install CWM from market as Galaxy Tab 10.1. The tab is bricked, if you choose to boot into recovery you will get sutck in an endless loop of reboots. With a little effort and connecting the tab to a PC you can get back to the choice menu and enter download mode.
You have been warned!
Click to expand...
Click to collapse
At least its only a soft brick...

Definitely good to know...sorry you went through the hassle to find out.
Thanks for sharing with us, lets hope someone can get a recovery working soon so I can be more dangerous!!!!
Sent from my GT-P7310 using xda premium

http://forum.xda-developers.com/showthread.php?t=1133590

Thanks, downloading now from: http://www.samsung-firmware.de/pxxx_62889641.html
This is the netload folder for the wi-fi version: http://netfolder.in/folder.php?folder_id=VgnYQ90 and the password: samsung-stuff.de
Samfirmware uses awful slow hosts lately.
Just got it today and I really got scared as the boot menu didn't show up anymore (the sammy logo did appear but it was followed by immediate shutdown) I was starting to think I got myself a hard brick
Got it from Amazon.fr, sorry I won't be able to share my firmware anymore...

Bec07 said:
Thanks, downloading now from: http://www.samsung-firmware.de/pxxx_62889641.html
This is the netload folder for the wi-fi version: http://netfolder.in/folder.php?folder_id=VgnYQ90 and the password: samsung-stuff.de
Samfirmware uses awful slow hosts lately.
Just got it today and I really got scared as the boot menu didn't show up anymore (the sammy logo did appear but it was followed by immediate shutdown) I was starting to think I got myself a hard brick
Got it from Amazon.fr, sorry I won't be able to share my firmware anymore...
Click to expand...
Click to collapse
Be careful. Sometimes it clears your SD card as well (depending on what exactly you're doing).
To be safe, make a backup of you SD card on your computer.

Only flashed the bootloader from that pack, seems to work!
... more or less. Trying to boot into recovery will restart the tabled, trying to do so from the CWM app will bring you back to the reboot loop...

Bec07 said:
Only flashed the bootloader from that pack, seems to work!
Click to expand...
Click to collapse
Sweet bro.

Sure wished I'd seen this message last night.....
Well, now to see if I can fix mine.
-dana

Thanks for finding this trick. I applied it but I moved from soft brick to what I thought was hard brick. Leaving it on the charger for a half hour as I took the dogs for a walk "woke the dead".
Thanks,
-dana

Amateur Geologist said:
Thanks for finding this trick. I applied it but I moved from soft brick to what I thought was hard brick. Leaving it on the charger for a half hour as I took the dogs for a walk "woke the dead".
Thanks,
-dana
Click to expand...
Click to collapse
A hard brick is when nothing shows up no matter what. Screen stays black no matter what you do, power button doesnt work, you cant get into any recovery or bootloader or anything..

I was a little iffy to install it...so glad I didn't. Had some issues with it on my GS2..pfft

i think i have bricked mine new P 7500
but there is nothing wrong i did with this device
tab is now in only conecting in APX
NVIDIA USB Boot-recovery driver for Mobile devices
no sign of charging and no light on display
is there any way to recover it back??????????
this is semi or hard bricked?????

How? this thread is meant for the 8.9 tabs...

This topic should be a sticky!
Anyway too late for me, just trying to work out what brick I have. Basically I done the above too but I'm trying to work out what type of brick I've got. I cannot see a charge light when put on charge. I can get to an option for recovery or download but can't get to recovery. I just get a bootloop of powering on as far as the samsung logo before shutting down, or at least the screen going black. I've never connected to computer yet but I think I've found the files I need should it be a soft brick. Any help in getting me through this would be appreciated.
---------- Post added at 06:15 AM ---------- Previous post was at 05:50 AM ----------
Bec07 said:
Only flashed the bootloader from that pack, seems to work!
... more or less. Trying to boot into recovery will restart the tabled, trying to do so from the CWM app will bring you back to the reboot loop...
Click to expand...
Click to collapse
Hmmm, can someone tell me a little more about this. What files exactly, from that german site? Now I'm confused. Could someone provide a link. I've got a uk unlocked sim free wifi only. And I know its a pita but some guidance on what do do with that file would be a great help
Many thanks

Dunbad said:
This topic should be a sticky!
Anyway too late for me, just trying to work out what brick I have. Basically I done the above too but I'm trying to work out what type of brick I've got. I cannot see a charge light when put on charge. I can get to an option for recovery or download but can't get to recovery. I just get a bootloop of powering on as far as the samsung logo before shutting down, or at least the screen going black. I've never connected to computer yet but I think I've found the files I need should it be a soft brick. Any help in getting me through this would be appreciated.
---------- Post added at 06:15 AM ---------- Previous post was at 05:50 AM ----------
Hmmm, can someone tell me a little more about this. What files exactly, from that german site? Now I'm confused. Could someone provide a link. I've got a uk unlocked sim free wifi only. And I know its a pita but some guidance on what do do with that file would be a great help
Many thanks
Click to expand...
Click to collapse
Trapped myself in this lobster pot too. Probably hold the record for purchase to soft brick in 10 hrs!
there is a link in second post from op which has the roms and the flashing software (Odin)eunfortunately they only had a 7310 rom when I looked. You need a 7300 rom for your phone to work. Please read as many forums as you can on this first. I ended up flashing an Asian image just to get back on my feet, then ended up flashing overcome and over clocking which works very well. Wish you luck!

same
same thing happened to me .I should of looked here before trying a backup. Used Odin to install this and its all good, and 3.2. megaupload.com/?d=0KYNVV4Z

FYI, I was stupid yesterday and allowed ROM manager to update my recovery partition (it told me there was an update available). Of course the update was for a Tab 10.1 and soft bricked my tab (it went into a boot loop). I recovered by going into download mode and using odin to flash only Tab 8.9 clockwork recovery image.
So, if anyone else bricks their tab by using an incompatible recovery, you should be able to recover back to where you were by just flashing a compatible recovery instead of using a full odin ROM.

[Q] Brick question

So I think I bricked my Note by misunderstanding the lpy bug (tried to flash directly to cm9, didn't realise that was the wrong way). I don't seem to even be able to get into the bootloader though, is that a normal symptom of this emmc bug brick? Just want to make sure it really is bricked before trying to return it to Samsung. Basically holding vol down+home+power does nothing. Plugging it in to charge doesn't show the charging icon etc. Looks pretty bricked to me but perhaps I'm missing something?

Can you get into recoverymode vol-up+home+power?

nope

slightly said:
nope
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

Hey, thanks for the suggestion. It doesn't seem to detect anything unfortunately. I think it might not apply to the Galaxy Note anyway.

Welcome to superbrick club.
Your best bet is to take the Note to SSC.
Act dumb, don't tell em' about rooting, flashing and roming.

What's SSC? Samsung something something I presume but..?

Ah Service Centre

Yeah and forgot to tell, flash stock kernel before you take your phone to SSC.
You don't wanna get caught with Clockwork Recovery, do you ?
---------- Post added at 12:54 AM ---------- Previous post was at 12:52 AM ----------
Sorry, if it is stone cold dead it is not necessary and you are not able to enter download mode either.

Heh, yeah it's dead as a dodo!

Anyone know if it might be worth trying a USB jig?

If you have access to a JIG. Its allways worth a try, it wont hurt your phone more. But I dont think it will help.

Thanks. I've ordered one as they're cheap and I guess it's worth a try.

So your screen is just all black. Nothing lights up？
Sent from my GT-N7000 using XDA App

Yeah absolutely no response from holding any button combination. Tried charging and also battery pulling between trying button combinations too.

Same here. JIG didn't make any difference

:/
Figure I'll get the same but as the bug can affect different bits of memory I suppose there's a small chance.
Have you RTM'd it to Samsung?

slightly said:
Heh, yeah it's dead as a dodo!
Click to expand...
Click to collapse
Try the procedures suggested by the following threads:
ATTENTION! my way out of a MMC_CAP_ERASE brick!
http://forum.xda-developers.com/showthread.php?t=1667886
How to revive your bricked Gnote
http://forum.xda-developers.com/showthread.php?t=1661590

My device is not being recognized neither by my Computer, nor by Odin.

Yeah same here, also the phone won't even enter download mode. Thanks for the links though tknguyencsu.

HELP phone briked

Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?

Check your drivers on your labtop and retry to put the GS in download mode

Try going in recovery system and do all three wipes...
Sent from my SGH-T959 using Tapatalk 2

I can't do anything i cant go into download mode and i cant go in to recovery mode i cant do ****
Any button i press wont do anything to turn on my SGS
I don't even see any backlight
is this worrying

I guess u hard bricked ur phone then...
Now there is only one way..
G
Get a USB jig and with the help of it u can go in download mode.. U can check the video below
http://www.youtube.com/watch?v=1RoZU5ZPMS4&feature=youtube_gdata_player
Proud owner of SGS GTI-9000.

I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).

Dustman317 said:
I've got a better solution and with it your phone will never be bricked in the future.
But you can use it only if you are handyman.
Follow this thread :
http://forum.xda-developers.com/showthread.php?t=1330491
and your phone will resurect and will be immortal ^^( manner of talk, if you drop it from the 51 floor of a building it will not survive).
Click to expand...
Click to collapse
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..

@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

mizzeeboy said:
@drakester20 the utube video that you sent me went back to xda site and said it will only work if the bootloader is workin mine is'nt
and
that method you showed on disecting the phone might be my only option
just out of curiosity could i give it to samsung and will they detect that it has been rooted?
BTW i installed a I9100 flash file on to the odin when i did it which was samsung s2 flash file now i realise what went wrong
Me being a **** head and installing the wrong file.:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
ohhh... srry my bad..
I did the same mistake when i rooted my phone for the first time..
and i did gave it to samsung and they fixed it..
they chnged the motherboard..
they wont see ur binary resets i guess..
u can try that too better then ripping ur phone off...

i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this

drakester20 said:
lol i ll never try that...
u seriously doing it?? O.O
wish u luck though..
Click to expand...
Click to collapse
It's easy you just have to make a bridge between two connectors (OMX5 and OMX0) and after you flash a software. If this manipulation can make my phone like a survivor i can do it ^^
---------- Post added at 12:04 PM ---------- Previous post was at 11:58 AM ----------
Don't worry about that the GS2 has a counter who is incremented when u flash a non official software it's a trick that the constructor used to help the Samsung's technicians to know if you can use the guarantee or not but the GS1 isn't equipped of this system, then it doesn't matter.

so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?

mizzeeboy said:
so @drakester20 are u saying that i can give it samsung and they wont know and charge mer nothing?
Click to expand...
Click to collapse
yeah dude.. they wont know ur binary resets anyway.. if u had sgs2 then they could have figured it out in download mode coz there it is written in download mode..
u can give it a try though...

@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?

mizzeeboy said:
@drakester20 so what did u tell samsung when your phone got briked.
Just found found out that my phone still has warranty till the end of next moth.
What should I say to them?
Should i say i used samsung kies to update then a failure message came on my screen ?
What should i say as I am running out of time and my warranty is nearly about to go?
Click to expand...
Click to collapse
yeah say that u tried samsung kies update and due to power failure or something ur phone got messed up..
BTW i just gave them my rooted and bricked phone and they did it for free..
If my post helped, don't mind hitting THANKS

marlonmrn said:
i have made the same thing, need to do somethings.. its not hard.. just need a few minutes to find this instructions on the other forum... w8
brb
edit:
posted by franciscocpg in brasildroid.com
1-Remove battery, sim card and sd card
2-wait 3~4 minutes
3-put your charger on galaxy (i lost my charger, used the usb cable and worked)
4-Hold power, and at the same time (dont release power), put battery, press vol.down and home button (in this order)
5-keep holding the buttons for 5~10 seconds
your galaxy must be online again..
i'm sorry for my bad english, but i think its understandable ;p
its work for me and more 7,8 ppls who was the cel bricked...
i hope that work for you too.....
post here any results
this
Click to expand...
Click to collapse
That did not work for me at all

mizzeeboy said:
Hi there i have a SGS which was running ics on a custom rom working fine
I then wanted to flash the official 2.3.6 os back on it for a friend.
I put the phone into download mode then odin did'nt do anything so i turned it off
now i can't see anything on the phone when i turn on the power key please can i do anything?
Click to expand...
Click to collapse
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you

dysan0201 said:
Try this:
1.Must have:Java,Linux,Windows,MacOS
2.Download this : http://heimdall-one-click.googlecode.com/files/OneClick.jar
3. Run the file
Video how work this: http://www.youtube.com/watch?v=tEotRhChSE4&feature=player_embedded
3. Maybe solved this problem
***
one more solution:
http://forum.xda-developers.com/showthread.php?t=964106
and another one
And here more information an another version for you
http://forum.xda-developers.com/showthread.php?t=1330491
I hope some link or file help for you
Click to expand...
Click to collapse
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?

mizzeeboy said:
Thnaks for all that good advice but unfortunately what ever button i press on that phone will not work
And guess what my warranty has gone to even better
Who thinks i should replace my motherboard and it will work again?
Click to expand...
Click to collapse
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS

drakester20 said:
Yeah.. motherboard will do it.. but it is very expensive.. around 8000 RS. (Convert urself )
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
Yeah I might want to sell it but i've seen some motherboard Resurrections using riff box i wonder some one might quote me for that job?

[Q]How to unbrick?

OK guys!
yesterday i cooked a ROM with dsixda's Android Kitchen.I also checked the updateR-script file to prevent any damage.
but the problem is :
ROM was flashed successfully and every single function worked. I just turned my phone off and it doesn't boot any more.
Any suggestions?
Is that a BRICK?
Thank you all in advance!:crying:

AriSLaSH said:
OK guys!
yesterday i cooked a ROM with dsixda's Android Kitchen.I also checked the updateR-script file to prevent any damage.
but the problem is :
ROM was flashed successfully and every single function worked. I just turned my phone off and it doesn't boot any more.
Any suggestions?
Is that a BRICK?
Thank you all in advance!:crying:
Click to expand...
Click to collapse
Can you get into Download/Recovery Mode? and what is it doing? Just black or showing the bootanimation? And btw you should have posted that in the q&a thread!

Try connect phone to charger and we will see.

thank you!
first i knew this should have been posted in Q&A but thought you guys can help me more.
my phone is showing a black screen and no response.
I just dont know what the hell has happened to this. It was working fine but ... you know the story!
I dont know if its a hard brick either. cuz nothing (just nothing) happened to the phone. No wrong flashing,ROM manager,...
just wanted to know what the should i do with this thing:crying::crying::crying:

You don't have flashed any kernel that's not for the i9001 right? If you have done that it's hard bricked. if not it's rescue-able

broodplank1337 said:
You don't have flashed any kernel that's not for the i9001 right? If you have done that it's hard bricked. if not it's rescue-able
Click to expand...
Click to collapse
The buttons is glowing when you touch it, while ex. you charge phone?

AriSLaSH said:
thank you!
first i knew this should have been posted in Q&A but thought you guys can help me more.
my phone is showing a black screen and no response.
I just dont know what the hell has happened to this. It was working fine but ... you know the story!
I dont know if its a hard brick either. cuz nothing (just nothing) happened to the phone. No wrong flashing,ROM manager,...
just wanted to know what the should i do with this thing:crying::crying::crying:
Click to expand...
Click to collapse
So, does download mode work or not?

1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it

If you cant boot phone anyway, that's Hard Brick...

AriSLaSH said:
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
Click to expand...
Click to collapse
Ans the qn man..there is no point of crying..can u goto diwnliad mode or not..provide useful info so ppl can help u...
Sent from my GT-I9001 using xda app-developers app

BTW - Do you even know, how to enter in download mode?... I know, that's stupid question but I must ask..

yeah I know what the hell is Download mode but if i can't turn this thing up,How can I get it to the download mode!
NO I CANT GET THIS THING IN THE DOWNLOAD MODE!!!!

AriSLaSH said:
yeah I know what the hell is Download mode but if i can't turn this thing up,How can I get it to the download mode!
NO I CANT GET THIS THING IN THE DOWNLOAD MODE!!!!
Click to expand...
Click to collapse
Relax man we are just trying to help
Sent from my GT-I9001 using xda app-developers app

i know that isn't the best thing i've ever said but you're sure that the battery isn't dead ?? it may happens but anyway it's weird ... you could meassure/verify it somehow

AW: [Q]How to unbrick?
Take battery out, wait 30 minutes Start Odin in your pc plug in the USB cable To the phone, press and hold the button Combo for download mode and take in the battery
sometimes this works, our phone is very hard To brick

i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.

AW: [Q]How to unbrick?
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
follow My instructions ( post direct above yours) this Method helps many people ! AND STOP WRITING WITH CAPS, ITS LIKE SCREAMING AND NO ONE LIKE IT !

AW: [Q]How to unbrick?
AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
Which value of voltage does the multimeter show
Sent from my GT-I9001 using xda app-developers app

AriSLaSH said:
i verified my battery with a multimeter and it's giving me Voltage.
unfortunately there's no SSC here so I could fix it but battery seems a bit...................weird
maybe it's dead.
I try to buy a new one and try again.
BUT PLEASE GIVE UR FEEDBACK MAYBE I DIDN'T NEED TO BUY ANYTHING.
thank you guys again.
edit:it hasn't been hit since I flashed my Homebrew crappy ROM.
Click to expand...
Click to collapse
Send my a link to your 'cooked' ROM, let me look at what you flashed... also, stay chill, we are trying to help you here.
Sent from my GT-I9001 using xda app-developers app

AriSLaSH said:
1.I haven't flashed any incorrect kernel
2.I can't boot the phone anyway.
Told you guys
dunno what the hell is wrong with this!
just after flashing my cooked ROM I shut the device down and thats all!
I don't think this is called a Brick but anyway I can't fix it
Click to expand...
Click to collapse
The first advice I can give to you is to take the battery out for overnight then put it back in.