Database Develop

[Q] dead????

tried to flash a different galaxy s firmware to my captivate thru download mode and it went to reboot but did not come back on the other day and now i cant get the phone to turn on at all. is there a fix or is it a $500 brick???

Different Galaxy S firmware meaning not a Captivate cooked rom?

straightup firmware from samfireware.com. have NEVER had a problem.

steveo314 said:
straightup firmware from samfireware.com. have NEVER had a problem.
Click to expand...
Click to collapse
But wrong bootloaders = brick, soft or otherwise. Try a jig to get into download mode.

Samfirmware has nothing which will work on your phone.
I'm looking to do some experimental non-invasive recovery on bricks and I need something to test. If you'd like, you can send it to me for some analys and it could help the entire community... or you can send to connexxion2005 for jtag recovery.

steveo314 said:
tried to flash a different galaxy s firmware to my captivate thru download mode and it went to reboot but did not come back on the other day and now i cant get the phone to turn on at all. is there a fix or is it a $500 brick???
Click to expand...
Click to collapse
If you can't get download mode probably bricked.
Sent from my Samsung Captivate using Tapatalk

AdamOutler said:
Samfirmware has nothing which will work on your phone.
I'm looking to do some experimental non-invasive recovery on bricks and I need something to test. If you'd like, you can send it to me for some analys and it could help the entire community... or you can send to connexxion2005 for jtag recovery.
Click to expand...
Click to collapse
im going to try the JIG first then ill probably check into the JTAG.....
just to double inform you guys this is the same issue i have.....
http://www.youtube.com/watch?v=jfkPHQbBcJ4

PM sent I can fix this for you quickly. It sounds like a hard brick. Adam, I'll get you that test board sooner or later! Just sitting on my desk.

steveo314 said:
im going to try the JIG first then ill probably check into the JTAG.....
just to double inform you guys this is the same issue i have.....
http://www.youtube.com/watch?v=jfkPHQbBcJ4
Click to expand...
Click to collapse
After watching your video, it looks like a hard brick. A jig will not help. You need to consider JTAG, invasive or non invasive.
Good luck.
Sent from my GT-I9000 using XDA App

Please post in the proper Q&A threads after searching. You would have found your answer alot faster.

Do USB Jigs work with SGM?

http://www.ebay.in/itm/UNBrick-Sams...?pt=IN_Mobile_Accessories&hash=item415d3ece49
http://www.dealextreme.com/p/unbric...msung-t959-i9000-i897-m110s-i8700-i9100-93514
Do these products work for the SGM? I saw somebody mentioning a jig to recover bricked phone somewhere here (related to SGM), but my request for clarification was not answered. Hence, creating this thread.
What software is required to use them?
And anybody got heimdall to work?

1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
i saw many people posting this trick n it worked for galaxy series n sgm too..if it is hard bricked then also..i dont think this device jig is required to unbrick,,,.
u r asking of software it is ODIN v4.38 download it by searching on google

Yes i confirm , work but no with hardware bricked SGM (black screen)

djeidj said:
Yes i confirm , work but no with hardware bricked SGM (black screen)
Click to expand...
Click to collapse
Thanks for this info. By "black screen", I hope you mean that the phone had neither download mode, nor battery charging sign??
Which jig did you use?
Can you describe the method or provide links?

In my case By "black screen", I mean that once i nstalled ROM MANAGER my phone does not start and shows only black screen and the phone had neither download mode, nor battery charging sign, in this case jig does not help.
---------- Post added at 10:12 PM ---------- Previous post was at 09:51 PM ----------
But when I downgread my phone he died again, then I used my hand-made jig and after restart my phone enter in downlosd mode. I used this method - search this in google - How I did: Restore soft-bricked Samsung Galaxy I9000. But I guess you can use the link which I will send a P.M

Were you able to bring back to life your galaxy mini? I'm in the same situation (black screen due to ram manager) but my home made jig doesn't work. (Although it works with galaxys and galaxy s2).
Any idea or suggestion?
Sent from my GT-P1000 using XDA Premium App

I managed to return my phone to my provider cervice , in this case it is the only solution for our phone. There told me that they changed the motherboard to fix it.

yeah it works depending on how your phone is bricked, mines really really hard bricked, no download mode, no charging ****, and odin nor doesnt recognize it, the only option is to surrender it to the carrier u bought it from

Hmm, many had problems with ROM Manager as I could see, and I guess its the reason for bricking. I'm never gonna use it anyways !!
Btw, I'm concerned about how the Service Center unbricks our device ?
We can't do that manually ?
I understand if its a hardware bricked stage, then no other option rather than handing the device to them.

coolsandie said:
Hmm, many had problems with ROM Manager as I could see, and I guess its the reason for bricking. I'm never gonna use it anyways !!
Btw, I'm concerned about how the Service Center unbricks our device ?
We can't do that manually ?
I understand if its a hardware bricked stage, then no other option rather than handing the device to them.
Click to expand...
Click to collapse
search google for for jtag. You need a jtag jig, which connects directly to the mother board (and not the usb jig). There is one available, but is real expensive, afaik.

thank you very much

confirmed, my usb jig , which works with i9000 doesn't work with my wife's SGM...

Yes it works. I Tested it myself.
But only on soft bricks not on hard bricks.
I can give you a video if you want just pm me. ^_^

With the SGM, you do not need a jig if it is only a soft brick. As long as you can enter download mode, ODIN works.

genieass said:
With the SGM, you do not need a jig if it is only a soft brick. As long as you can enter download mode, ODIN works.
Click to expand...
Click to collapse
precisely.
btw those issues with rom manager.... it doesn't happen to me.

So if my phone doesn't turn on in any mode, is not recognized by odin, that means I have hardware brick? And USB jig will not work, right?

TheWhisp said:
So if my phone doesn't turn on in any mode, is not recognized by odin, that means I have hardware brick? And USB jig will not work, right?
Click to expand...
Click to collapse
no! if read ur testimony
its caused ur wrong flash kernel , only one way is use "jtag" to flash the recovery kernel. then flash custom .
usb jig only purpose for softbricked.
hope it answers thy question

So in repair service they use these jtag tools?

TheWhisp said:
So if my phone doesn't turn on in any mode, is not recognized by odin, that means I have hardware brick? And USB jig will not work, right?
Click to expand...
Click to collapse
Actually, there might still be hope, USB Jig works, you can make one by stripping the USB cord's end and connect 3 100k ohms resistors on two points, I can post photos if you want.
If your bootloader is already damaged by a bad flash, just hope your factory download mode's partition isn't also damage. If not, then the jig will work.
Also if anybody would like, here's my thread on how to flash stock ROMs 100% safe.
http://forum.xda-developers.com/showthread.php?t=1551586

TheWhisp said:
So in repair service they use these jtag tools?
Click to expand...
Click to collapse
In some cases yes

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.

You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium

hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries

You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2

First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.

There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.

Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk

Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.

vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.

mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...

chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.

firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??

Try a different USB cable?
Sent from my SPH-D710 using XDA

izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.

jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?

jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?

lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

Dead Samsung Galaxy Note

i tried to install miui 4 without using abyss kernel, the mobile got off in the middle of the installation and since then its not at all showing anything
i tried to go back to recovery and download mode but nothing is happening to the phone and when i connect the phone to pc, pc is not detecting anything, and when i try to connect the mobile to charging... it doesnt charge at all and dont show anything on the mobile screen... the mobile screen always remain black like its without battery
can any one help?????????/

Can you get repaired by SS service? That will be the easy option.
Otherwise, it seemed that Sar17 can help with his firsthand experience since he has just revived his hardbrick Note using a combination of several methods including Jtag and and repartition.
http://forum.xda-developers.com/showthread.php?t=1667886&page=37
Perhaps should try to PM him. GL!

forest1971 said:
Can you get repaired by SS service? That will be the easy option.
Otherwise, it seemed that Sar17 can help with his firsthand experience since he has just revived his hardbrick Note using a combination of several methods including Jtag and and repartition.
http://forum.xda-developers.com/showthread.php?t=1667886&page=37
Perhaps should try to PM him. GL!
Click to expand...
Click to collapse
thanks for the reply... but i am still confused ... is it bricked or some other problem?

I guess whatever the cause does not matter much, still the same problem of a hard brick which could not even turn on, nothing. The choice to fix are below:
1. use a jig to get it start into download mod. Then odin stock rom or repartition using a custom PIT file if odin get stuck somewhere (because of partition damage by emmc bug kernel).
2. if jig does not work then need a Jtag to fix it. In case there is also partition damage jtag alone will not work, and will need also repartition. That is the case of Sar17.
That are the only ways that I know can help revived it (beside motherboard replace). Hope you can figure out or Sar17 can help you with more details. cheers.

forest1971 said:
I guess whatever the cause does not matter much, still the same problem of a hard brick which could not even turn on, nothing. The choice to fix are below:
1. use a jig to get it start into download mod. Then odin stock rom or repartition using a custom PIT file if odin get stuck somewhere (because of partition damage by emmc bug kernel).
2. if jig does not work then need a Jtag to fix it. In case there is also partition damage jtag alone will not work, and will need also repartition. That is the case of Sar17.
That are the only ways that I know can help revived it (beside motherboard replace). Hope you can figure out or Sar17 can help you with more details. cheers.
Click to expand...
Click to collapse
can u explain how to use jig or jtag... i will be very thankful to u

This is how to use a Jig:
- Turn off your phone and pull out the battery
- Just put the battery back and don't turn it on
- Plug the Jig into the micro USB port on the phone
- After about 2 seconds, you can see the yellow download mode logo on the screen.
- Unplug the module
- Connect your phone with USB cable to computer and then flash your phone via odin.
You can buy it online very cheap.
http://www.dealextreme.com/p/unbric...msung-t959-i9000-i897-m110s-i8700-i9100-93514
It does not list N7000 but will work since some people in xda have tried.
About Jtag it will cost more and more complicated to use. I do not have much info so you will need to search google.
Also remember to send Sar17 a private message. I guess he can help with Jtag.
Cheers.

forest1971 said:
This is how to use a Jig:
- Turn off your phone and pull out the battery
- Just put the battery back and don't turn it on
- Plug the Jig into the micro USB port on the phone
- After about 2 seconds, you can see the yellow download mode logo on the screen.
- Unplug the module
- Connect your phone with USB cable to computer and then flash your phone via odin.
You can buy it online very cheap.
http://www.dealextreme.com/p/unbric...msung-t959-i9000-i897-m110s-i8700-i9100-93514
It does not list N7000 but will work since some people in xda have tried.
About Jtag it will cost more and more complicated to use. I do not have much info so you will need to search google.
Also remember to send Sar17 a private message. I guess he can help with Jtag.
Cheers.
Click to expand...
Click to collapse
thanks !!! i have already PM Sar17..... the link u sent for buying is not working... any other link for buying??????/

The link open perfectly fine for me. try again. otherwise, should search jig (picture) then will see it come up.
http://www.dealextreme.com/p/unbric...msung-t959-i9000-i897-m110s-i8700-i9100-93514
There is also a guide on how to do it oneself which looks not very easy. Buying is a better option.
http://forum.xda-developers.com/showthread.php?t=819551
---------- Post added at 11:59 PM ---------- Previous post was at 11:23 PM ----------
BTW, it is important to check battery as well if possible. A malfunction battery will cause same symptoms. cheers.

Hard bricked

So i've had a CM9 Beta 1 build on my phone, it was running like a charm past week, so while surfing around internet i've found a flashable zip that makes your status bar look like Jellybean (Specified it works with CM9 Beta 1!) and i've got stuck in recovery bootloop like the last time.
I've tried various way's, one of those was to reflash the ROM or flash a stock ROM from Odin, and it keeped getting stuck on stage VerifyPlatform...
So i've found a thread that fixes all of this mess with a .bat file for computer, and after using it my phone actually died.
I can't turn it on, it's all black..
I think i'm seriously lost...
I'm hoping for exact help that could fix it, not an maybe, i seriously need help! ;(

Kramtoske said:
So i've had a CM9 Beta 1 build on my phone, it was running like a charm past week, so while surfing around internet i've found a flashable zip that makes your status bar look like Jellybean (Specified it works with CM9 Beta 1!) and i've got stuck in recovery bootloop like the last time.
I've tried various way's, one of those was to reflash the ROM or flash a stock ROM from Odin, and it keeped getting stuck on stage VerifyPlatform...
So i've found a thread that fixes all of this mess with a .bat file for computer, and after using it my phone actually died.
I can't turn it on, it's all black..
I think i'm seriously lost...
I'm hoping for exact help that could fix it, not an maybe, i seriously need help! ;(
Click to expand...
Click to collapse
do u have i9001 or i9000?I dont know how to fix it.I would give it to samsung to repair it.

cistamlaka said:
do u have i9001 or i9000?I dont know how to fix it.I would give it to samsung to repair it.
Click to expand...
Click to collapse
It's i9001.
I can't give it to Samsung, it's rooted! D:

Kramtoske said:
It's i9001.
I can't give it to Samsung, it's rooted! D:
Click to expand...
Click to collapse
Did you try pulling out the battery for 15 minutes, then try to get to download mode?

Can u get into download mode?
If my post helped, don't mind hitting THANKS

drakester20 said:
Can u get into download mode?
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
So far i did not pulled out battery for 15 minutes, so i'm not sure if this is normal, but the download mode combination does not work. :/

See HERE,i think it would help you.

Lol.. I accidentally hit the thanks button... maybe u can throw one back...
So I was just gonna reply that he can't get into download mode so this is useless my friend..
If my post helped, don't mind hitting THANKS
---------- Post added at 11:59 PM ---------- Previous post was at 11:58 PM ----------
U don't even get that phone to pc disrupted like connection picture when u try to boot?
If my post helped, don't mind hitting THANKS

i9000 use hummingbird chip .. can use usb jig or if detect as sp5c110, can use unbrickable mod software to revive it (if not detect then have to do hw mod)
i9001 use different chip ie msm8255t .. try the button combination or usb jig to get into download mode. If it detect as qusb_load something then there might still have chance. If still nothing I'm afraid only jtag/riffbox can help.
I once bricked a Galaxy W i8150 (msm8255t) because of wrong bootloader flashed. Usb jig don't work. Had to use riffbox to revive it.

Yeah if jig doesn't work then u gotta replace the jtag
If my post helped, don't mind hitting THANKS

Hello, it's been a while. Thanks for all the feedback people.
I'm not trying to bump or anything, just saying that i've brought the phone to my carrier and played a little dumb game, lied and got it to be fixed. I hope to get good news soon.

Kramtoske said:
Hello, it's been a while. Thanks for all the feedback people.
I'm not trying to bump or anything, just saying that i've brought the phone to my carrier and played a little dumb game, lied and got it to be fixed. I hope to get good news soon.
Click to expand...
Click to collapse
Lols i almost got the same issue with my I9001. I would have blamed KIES...