Database Develop

Do USB Jigs work with SGM?

http://www.ebay.in/itm/UNBrick-Sams...?pt=IN_Mobile_Accessories&hash=item415d3ece49
http://www.dealextreme.com/p/unbric...msung-t959-i9000-i897-m110s-i8700-i9100-93514
Do these products work for the SGM? I saw somebody mentioning a jig to recover bricked phone somewhere here (related to SGM), but my request for clarification was not answered. Hence, creating this thread.
What software is required to use them?
And anybody got heimdall to work?

1.- Remove both the SIM card and de microSD card.
2.- KEEP YOUR BATTERY REMOVED
3.- Apply the Download-mode button combination (known by you all)
4.- WHILE HOLDING THE COMBINATION, insert the battery, and keep the buttons pressed untill you get the download mode.
5.- Flash your phone with a valid firmware through Odin (Preferebly, have Odin prepared before doing this trick)
i saw many people posting this trick n it worked for galaxy series n sgm too..if it is hard bricked then also..i dont think this device jig is required to unbrick,,,.
u r asking of software it is ODIN v4.38 download it by searching on google

Yes i confirm , work but no with hardware bricked SGM (black screen)

djeidj said:
Yes i confirm , work but no with hardware bricked SGM (black screen)
Click to expand...
Click to collapse
Thanks for this info. By "black screen", I hope you mean that the phone had neither download mode, nor battery charging sign??
Which jig did you use?
Can you describe the method or provide links?

In my case By "black screen", I mean that once i nstalled ROM MANAGER my phone does not start and shows only black screen and the phone had neither download mode, nor battery charging sign, in this case jig does not help.
---------- Post added at 10:12 PM ---------- Previous post was at 09:51 PM ----------
But when I downgread my phone he died again, then I used my hand-made jig and after restart my phone enter in downlosd mode. I used this method - search this in google - How I did: Restore soft-bricked Samsung Galaxy I9000. But I guess you can use the link which I will send a P.M

Were you able to bring back to life your galaxy mini? I'm in the same situation (black screen due to ram manager) but my home made jig doesn't work. (Although it works with galaxys and galaxy s2).
Any idea or suggestion?
Sent from my GT-P1000 using XDA Premium App

I managed to return my phone to my provider cervice , in this case it is the only solution for our phone. There told me that they changed the motherboard to fix it.

yeah it works depending on how your phone is bricked, mines really really hard bricked, no download mode, no charging ****, and odin nor doesnt recognize it, the only option is to surrender it to the carrier u bought it from

Hmm, many had problems with ROM Manager as I could see, and I guess its the reason for bricking. I'm never gonna use it anyways !!
Btw, I'm concerned about how the Service Center unbricks our device ?
We can't do that manually ?
I understand if its a hardware bricked stage, then no other option rather than handing the device to them.

coolsandie said:
Hmm, many had problems with ROM Manager as I could see, and I guess its the reason for bricking. I'm never gonna use it anyways !!
Btw, I'm concerned about how the Service Center unbricks our device ?
We can't do that manually ?
I understand if its a hardware bricked stage, then no other option rather than handing the device to them.
Click to expand...
Click to collapse
search google for for jtag. You need a jtag jig, which connects directly to the mother board (and not the usb jig). There is one available, but is real expensive, afaik.

thank you very much

confirmed, my usb jig , which works with i9000 doesn't work with my wife's SGM...

Yes it works. I Tested it myself.
But only on soft bricks not on hard bricks.
I can give you a video if you want just pm me. ^_^

With the SGM, you do not need a jig if it is only a soft brick. As long as you can enter download mode, ODIN works.

genieass said:
With the SGM, you do not need a jig if it is only a soft brick. As long as you can enter download mode, ODIN works.
Click to expand...
Click to collapse
precisely.
btw those issues with rom manager.... it doesn't happen to me.

So if my phone doesn't turn on in any mode, is not recognized by odin, that means I have hardware brick? And USB jig will not work, right?

TheWhisp said:
So if my phone doesn't turn on in any mode, is not recognized by odin, that means I have hardware brick? And USB jig will not work, right?
Click to expand...
Click to collapse
no! if read ur testimony
its caused ur wrong flash kernel , only one way is use "jtag" to flash the recovery kernel. then flash custom .
usb jig only purpose for softbricked.
hope it answers thy question

So in repair service they use these jtag tools?

TheWhisp said:
So if my phone doesn't turn on in any mode, is not recognized by odin, that means I have hardware brick? And USB jig will not work, right?
Click to expand...
Click to collapse
Actually, there might still be hope, USB Jig works, you can make one by stripping the USB cord's end and connect 3 100k ohms resistors on two points, I can post photos if you want.
If your bootloader is already damaged by a bad flash, just hope your factory download mode's partition isn't also damage. If not, then the jig will work.
Also if anybody would like, here's my thread on how to flash stock ROMs 100% safe.
http://forum.xda-developers.com/showthread.php?t=1551586

TheWhisp said:
So in repair service they use these jtag tools?
Click to expand...
Click to collapse
In some cases yes

My Galaxy Note Is DEAD!!

Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.

You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium

hav0c said:
You probably end up going to Samsung. Pay €200 and get a new motherboard.
Good luck.
Sent from my CM9 GT-N7000 using XDA premium
Click to expand...
Click to collapse
WOW...
the problem is that i live in a fu**ed up country and we dont have samsung here.
all phones come without warranty and by smuggling from other countries

You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2

First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.

There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.

Dude, if you have no way of repairing a bricked phone in your country then stay away from flashing custom ROMs!!!
Sent from my superior GT-N7000 using Tapatalk

Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
i love my note so much that if i couldnt fix it i think im gonna kill myself.
let me tell you the whole story, maybe you can revive my note again.
im a daily rom flasher, sometimes even 2 or 3 roms a day,
i wanted to flash ics stunner rom so i went into cwm recovery,flashed the zip file and wanted to format data\factory reset, but while the phone was formatting i accidently pressed the power button, the phone was stuck and didn't complete formatting, i took the battery out, put it back in and powered the phone, it was stuck at the bootscreen GTn7000 Galaxy Note.
I got into download mode and flashed a stock rom, but it was the same.
i downloaded and flashed other stock roms but it was stuck at the bootscreen.
then i wanted to flash a stock rom that came with a Pit file, i did everythig correctly, and Odin was stuck at the partition thing, for more than 15 minutes.
i unpluged the phone i pressed the power button, NOTHING!!
i officially bricked my phone which i worked so hard for months to get it.
i tried everything,even the jig thing, i couldn't buy so i had to make one.
maybe i did somethig wrong with the jig or maybe because i didnt solder it or the usb plug im using isnt working.
this may be relevant, i pluged the usb OTG in the phone and in the OTG was a bluetooth peice for computers, the piece had a light, and the light was ON.
Another thing that if i leave the battery in the phone for a while, the camera area in the back gets a little hot, my phone always did that meaning its still alive.
i may have written too much, forgive me but im really desperate.
Thanks in advance.
Click to expand...
Click to collapse
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.

izzmohamed said:
Hi everybody, I searched everywhere for a solution but no luck
Click to expand...
Click to collapse
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

octavian90 said:
You mentioned killing yourself. Bro it's just a phone... Hang in there!!!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
if you had gone through what i went through to get the phone, you would probably do the same.Thanks for the reply, any thing would help me right now.

vijai2011 said:
First thing donot flash Ics now untill you are craze about it.2nd donot use CWM as much as possible.Read this.
Ok to the problem now.Since you say it gets hot,it might be still alive.Remove the battery and insert it after 10 secs and insert the jig and after few secs press vol up button.Now connect the phone to computer and see if its detected if it does try flashing abyy's kernel.I dont know which kernel for sure.Somebody might help you.People were able to get into DL mode when there screen were not showing anything.
Click to expand...
Click to collapse
Thanks man, i will definitely try it right away.

mother board
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...

chasmodo said:
There are situations when your phone is working, but your screen is black.
Let's hope yours is one of those...Try this:
1. Don't flash Abyss. Download a stock GB Rom instead.
2. Charge your phone for a couple of hours. You need your battery for the
following steps.
3. After charging, take out your battery and wait 1 minute
4. Put it back in
5. Boot into Download mode (Volume Down+Home+Power) (you will see only black screen)
6. Count to 10
7. Press Volume Up
8. Count to 10
9. Start your PC Odin
10. Connect your phone to PC
11. Wait untill PC installs the necessary drivers
12. If all goes well, your PC Odin will flash the yellow light with COM info in it
13. Flash your stock GB Rom
If this doesn't work, you'll need to think of the ways of getting your phone JTagged or where to get a new motherboard.
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
kvsandeepreddy said:
Bro as u mentioned already that u flashed stock once...all root and cmw will be wiped... i would prefer going to samsung service center and tell them that u were updating your phone through kies and after the update completed ur phone stopped working... they will fix it for free... and act innocent
Edit::: dint see the other post where u mentioned that there is no samsung center at your place... in that case theres only one thing u can do... buy the motherboard and fix it urself.... sorry that ur beast is dead
Click to expand...
Click to collapse
MR.change said:
Your phone is pretty much dead I'm afraid
Why didn't you bother to read stickies first?
It has been known for several weeks now that doing a wipe from CWM in a leaked recovery (I.e all ICS ROMs except cm9 official) will lead to a corrupted emmc drive ,thus a dead phone
And no ,you pressing the power button had nothing to do with it being stuck
The moment you hit wipe from ICS stunner's recovery your phone was dommed.
Anyway what's done is done ,now find an unofficial repair shop and replace your motherboard.
I hope this makes it clear ,and good luck to you.
Click to expand...
Click to collapse
pvillasuso said:
Try this : http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !
Click to expand...
Click to collapse
You guys are awesome, im gonna do everything you said and get back with the results, fingers crossed.
I have a friend who's going to Dubai,UAE in a week or so. if nothing worked i'll send the phone with her to repair it at samsung,does anybody know if there's a samsung service center in Dubai and give me the location ?
i cant thank you enough,really appreciate all the help.

firasusman said:
mother board is gone due to kernel harm of ics leak
sorry
this is the fact...
Click to expand...
Click to collapse
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??

Try a different USB cable?
Sent from my SPH-D710 using XDA

izzmohamed said:
OK, how much will it cost me ?
by the way i forgot to mention that before i bricked the note, it had a charging problem, saying voltage too high,charging stopped,and when the phone is turned off the battery icon keeps appearing and disapearing, could it be that the jig is not working because of that??
Click to expand...
Click to collapse
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.

jeffrey567 said:
Try a different USB cable?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I did, still the same.
jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Hmmm,i'll try cleaning it.I had the same situation, so the jig should work fine despite this problem ?

jayshah said:
You're not going to like this: I had to send my phone back to Samsung to get that fixed. Basically the charging port was shorting out, happens when stuff gets inside it (dirt, moisture, etc, from what I read). You could try cleaning it, but for me the port didn't break, it just acted like it was charging when there was nothing plugged in. So the JIG will work if it's supposed to.
Click to expand...
Click to collapse
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?

lanwarrior said:
Just out of curiosity: Are you in the US and had to send your international Note somewhere? I am wondering how one can get a support for an International Note if you're in the US.
I don't mind sending it to another country, but which Samsung center will accept it?
Click to expand...
Click to collapse
I am wondering the same thing, mine got bricked about a week ago and I don't really know what to do with it

[Q] Brick question

So I think I bricked my Note by misunderstanding the lpy bug (tried to flash directly to cm9, didn't realise that was the wrong way). I don't seem to even be able to get into the bootloader though, is that a normal symptom of this emmc bug brick? Just want to make sure it really is bricked before trying to return it to Samsung. Basically holding vol down+home+power does nothing. Plugging it in to charge doesn't show the charging icon etc. Looks pretty bricked to me but perhaps I'm missing something?

Can you get into recoverymode vol-up+home+power?

nope

slightly said:
nope
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=1257434
To force your phone into Download mode !

Hey, thanks for the suggestion. It doesn't seem to detect anything unfortunately. I think it might not apply to the Galaxy Note anyway.

Welcome to superbrick club.
Your best bet is to take the Note to SSC.
Act dumb, don't tell em' about rooting, flashing and roming.

What's SSC? Samsung something something I presume but..?

Ah Service Centre

Yeah and forgot to tell, flash stock kernel before you take your phone to SSC.
You don't wanna get caught with Clockwork Recovery, do you ?
---------- Post added at 12:54 AM ---------- Previous post was at 12:52 AM ----------
Sorry, if it is stone cold dead it is not necessary and you are not able to enter download mode either.

Heh, yeah it's dead as a dodo!

Anyone know if it might be worth trying a USB jig?

If you have access to a JIG. Its allways worth a try, it wont hurt your phone more. But I dont think it will help.

Thanks. I've ordered one as they're cheap and I guess it's worth a try.

So your screen is just all black. Nothing lights up？
Sent from my GT-N7000 using XDA App

Yeah absolutely no response from holding any button combination. Tried charging and also battery pulling between trying button combinations too.

Same here. JIG didn't make any difference

:/
Figure I'll get the same but as the bug can affect different bits of memory I suppose there's a small chance.
Have you RTM'd it to Samsung?

slightly said:
Heh, yeah it's dead as a dodo!
Click to expand...
Click to collapse
Try the procedures suggested by the following threads:
ATTENTION! my way out of a MMC_CAP_ERASE brick!
http://forum.xda-developers.com/showthread.php?t=1667886
How to revive your bricked Gnote
http://forum.xda-developers.com/showthread.php?t=1661590

My device is not being recognized neither by my Computer, nor by Odin.

Yeah same here, also the phone won't even enter download mode. Thanks for the links though tknguyencsu.

[Q] Help me with detecting hardbrick

Help! I have a brick while flashing via CWM. I wanna understand, which exactly brick i've got.
Details: i had MIUI 2.9.19 perfectly working. Then i try to flashing MIUI 2.9.29 via CWM, without any wiping, just updating. Process stopped on "Formating system partition" (or something like) for some minutes, then phone has switched off.
Now it are no longer bootable in any of the modes (voll up/down+home+power). Charging make battery warm. Odin does not see phone even in blind mode (with blang screen). I've try a homemade JIG (306kOm and 301kOm) with no effect.
How to boot it? What I have to try else?
Did it a broken system memory chip? Its a hard brick and need to chip replacement?
Plese help me, what i need to do. In my town have no samsung service...
Thanks and sorry my english)

i don't want make you sad but you super brick your note..all what you write is from super brick....I also I take my note before a week from service from super brick and they replace the motherboard with new one.I am happy because my note it was rooted but the warranty cover's me..!
I know a guy from us who can fix it with JTAG but I'm not trust things like that.
you cannot do anything..so hope cover you the warranty..

open odin on pc and connect the usb to phone and pc.. then press the vol dwn+pwr+home .. keep it pressed and check if something comes up on odin

nokiamodeln91, nothing comes up on odin (1.82 and 1.87 versions).
Have tried it many times with different USB ports... May be i need a special drivers? But windows 7 must be start searching it, new device not appeared even.

Visit dr ketan's thread and download the updated drivers
Sent from my GT-N7000 using xda app-developers app

I guess if no download and no recovery mode the. samsung service
or may be try with a JiG
# message swifted from Note, travelled in the air to gateway and wi-maxed to [email protected] #

Superbrick, need mobo replacement. Sorry dude.
Sent from my GT-N7000 using xda premium

[Q] Easy guide to JTAG without using expensive box

So yeah, I bricked my Samsung Galaxy Ace with the wrong kernel through Clock Work Recovery, chose reboot option, screen turned black.
I have tried all the button combos, with inserting battery method and all of that, I even bought a USB Jig but to no avail. The furthest I've come to entering Download Mode(button combinations, to then flash with Odin) is that the computer is detecting the samsung galaxy ace as a modem(If I do not press the button combinations the computer detects nothing at all) and I cannot establish connection with the phone with Odin nor adb shell.
I have searched these forums a few hours a week the last two weeks and the only possible option seems to be JTAG unbrick. I have no money to get me a 100$ jtag-box just to resurrect this phone, so my question is this:
Is there any other way that Is cheap and not too advanced for a tech newbie like myself to unbrick the phone? I have no problem with soldering, but my question is, is there any other module(or would a simple jtag cable work?) to access the phones internal workings?
Or maybe there is another way to save this phone? Please post if you have experiance!
No, I have no warranty left on the phone, and no I do not want to leave it to some jtag service. That is not the problem.
Help/tricks greatly appreciated!

I had the exact same delema I kept plugging the phone into the c in download.mode and in the end my computer rexonized it ans was able to flash back to stock phone resets every now and then but other than that works fine I now use in rooted fully stock on.not.running the risk
Sent from my GT-S5830 using xda app-developers app

chooky536 said:
I had the exact same delema I kept plugging the phone into the c in download.mode and in the end my computer rexonized it ans was able to flash back to stock phone resets every now and then but other than that works fine I now use in rooted fully stock on.not.running the risk
Click to expand...
Click to collapse
Was the screen black when you flashed It through Odin aswell? Cause all Im getting from Odin is "setting up connection..." and there it stops. Did I miss something?

Wrong kernel as in?
Another device? A jig "might" help you...
*emphasise the 'might'*

Prawesome said:
Wrong kernel as in?
Another device? A jig "might" help you...
*emphasise the 'might'*
Click to expand...
Click to collapse
Yeah, I got ahold of a Jig tried on my friends Samsung S2, and It did not work. I don't remember what I tried to flash it with, It was through clockworkmod and I was going to flash with rafaels kernel but must have got ahold of the wrong one in his SkyDrive map. Anyayws, I applied the .zip and chose reboot and all went permanently black.
Anyone have experiance in UART-Jigs and whatnot?