Database Develop

[Q] Uninstall OverCome Rom.

Hey guys. I am new to android. I just installed the OverCome Rom to my Galaxy Tab Asia Model and I thought of uninstalling it because I think I wanna use the original firmware. Anyone can teach me how to uninstall the overcome rom and flash my Glaaxy Tab to my original firmware? Thank you guys

What is your original firmware? If its froyo, flash rotohammers rom, then your original.

Yup its froyo. Do u have any tutorial cause im not that good with this
Sent from my GT-P1000 using XDA App

Roszaidee said:
Yup its froyo. Do u have any tutorial cause im not that good with this
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
do you want to reflash froyo overcome? Or return your tab back to standard, any case, you should be safe if you do a Odin flash back to a rotohammer froyo, then the froyo rom of choice, just follow the overcome instructions but switch the roms for what I said
swyped from a galaxy far far away...

i wanna make my galaxy tab back to normal, just like a freshly baked cake out from the box. can you tell me what firmware do i need to use? im using asia Galaxy Tab. cause im not the expert, this OverCome rom my uncle helped me to do it now hes away, i cant undo it =(

based on the firmwares found on samfirmware, there are different stock asian firmwares available. there is an Indian version (P1000DD), south east asian version (P1000DX), Hong Kong version (P1000ZH) and Taiwan version (P1000ZT).
i myself keep 2 froyo firmwares to go back to:
P1000DXJK2 - which was the firmware that came with my tab when i bought it sometime in december.
P1000DXKM3 - which was posted sometime in february/march that i got from a thai forum.

Singapore galaxy tab should be south east asian right?
Sent from my GT-P1000 using XDA App

yup. SouthEast Asian Firmware is for you, same as mine.
you could check my other post related to this matter.
Post 62
hope this helps.

So i just follow the exact steps and use the exact same files?
Sent from my GT-P1000 using XDA App

Can you give me the link for the galaxy tab latest south east asian firmware?
Sent from my GT-P1000 using XDA Premium App

Roszaidee said:
So i just follow the exact steps and use the exact same files?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Yup, these are the exact same files and same steps i use when i restored back to froyo.
Roszaidee said:
Can you give me the link for the galaxy tab latest south east asian firmware?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
i believe p1000DXKM3 is the latest stock firmware released/leaked to the public right now. it is still Froyo 2.2 though.
here in the philippines i'm still waiting for an official release of stock Gingerbread 2.3.3 for our region.

I see i see. Thank you very much brahh!
Sent from my GT-P1000 using My Hands To Type

no problem..

broo. i need help ! my galaxy tab keeps showing the samsung boot logo. any help pleasee?

what has happened exactly?
you could try powering down your tab first.
then try entering recovery mode (done by pressing volume up + power button).
wipe your cache and then afterwards restore to factory settings.

unable to change my Galaxy Tab (GSM) rom from Custom overcome to Rotohammer or any st
Hi guys, I read the post and tried Rotohammer but it failed in the start hanging at "Connection setup" then shows fail. Can anybody suggest how to remove this Custom ROM Overcome_v1.6.4 and install any Foroyo stock rom.

Tausif330 said:
Hi guys, I read the post and tried Rotohammer but it failed in the start hanging at "Connection setup" then shows fail. Can anybody suggest how to remove this Custom ROM Overcome_v1.6.4 and install any Foroyo stock rom.
Click to expand...
Click to collapse
Hi I'm a noob myself but I assume you can just follow the overcome guide to go back to stock?... basically, go into download mode And flash "overcome stock froyo safe" using Odin. I may well be missing something but wehenever I mess up and my tab won't boot, I just re-flash...
This is my first attempt at offerring help to anyone here, if i'm wrong please tell me! (Nicely!)
Sent from my GT-P1000 using XDA App

help please

k so my phone i9000m was recently running a mod version of gingerbread which made it a i9000. I wanted to get the real version which is out for bell. anyway long story short stuck in download mode and need a file to plug into odin and have my phone working running any bell issued firmware.

Hi, here is a link to ramads thread for stock roms.
http://forum.xda-developers.com/showthread.php?t=1102881
[Firmwares]Stock I9000 and I9000M Firmwares collection [Latest: XWJVN, UGKG3, DDJV9]
Sent from my GT-I9000 using Tapatalk

do you have any recomendations on which rom to use?
trying now with ugkc1 and odin stuck at param.lfs

Sure, if you want a clean customrom i recomend surface by sam. Its a lot of other nice roms, but i like that one
I,m on stock jvr rom for the time, only cfroot to remove som samsung stuff.
And it's really good
Sent from my GT-I9000 using Tapatalk

Thanks
Checking it out now!

If you want to go to the stock, go to the thread by ramad mentionned above and flash UGKG3, it's the latest and greatest stock bell firmware, as well as being rooted and deodexed. I'm running it now, works great.
Sent from my GT-I9000M using XDA App

Ok ill take a look at that too. How long have you been running that on your phone? Will I be able to update my phone in the future via kies if I wanted to?
Sent from my GT-I9000 using XDA App

You can update using kies, it's detected and read by the kies client. I've been running it for a few weeks, never a single problem. It has busybox 1.19 installed in the bin folder, but you can just install an older one to sbin or xbin if you really need to. I really recommend it, I had a lot of trouble trying to root the stock 2.2.3 on my own.
Sent from my GT-I9000M using XDA App

[Q]Bootloaders

Is there any way to check what bootloaders I am running? I did have the GB bootloaders installed when I ran Fusion, Fasty & J3 leak but I have Odin'd back to stock with the no bootloader version & Kies Mini upgraded me to Froyo. Does Kies flash the froyo bootloaders? Is there a way I can check using root explorer?
Sent from my SGH-I897 using xda premium

If you flash a TB rom and it doesn't work. The only way to check.
Sent from my SAMSUNG-SGH-I897 using xda premium

A side from trial and error of kernels and button cimbos you can't. Tho there might be some info in a UART readout. But getting it to even post UART is more then what most of us are willing to do.
leaked from my FUSED SGS I897 contaminating you via XDA app.

If I have an I9000 Gingerbread ROM installed, do I need to flash new bootloaders if I want to flash a Captivate ROM?

mfdemicco said:
If I have an I9000 Gingerbread ROM installed, do I need to flash new bootloaders if I want to flash a Captivate ROM?
Click to expand...
Click to collapse
No. I've stayed on i9000 GB bootloaders and flashed Captivate ROMs; they work fine.
Sent from my SGH-I897 using XDA Premium App

Normally no, gb bootloaders are compatible with each other, only the stock music player is known to misbehave. Some devs will advise you to use specific bootloaders, but in the end it's ur call. I'd say pick ur poison and stick with it, avoid flashing bootloader as much as u can, as it's THE part in the flashing process where your phone can be hard bricked.

Just flashed a GB stock rom w/ no BL's & it works. Looks like Mini Kies leaves the BLs alone when being upgraded from Eclair.
Sent from my SAMSUNG-SGH-I897 using xda premium

mcala said:
Just flashed a GB stock rom w/ no BL's & it works. Looks like Mini Kies leaves the BLs alone when being upgraded from Eclair.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Are you on Rogers? if so then Kies did update the BL's, if it didnt and you try running a true GB ROM then you wouldnt be able to boot, it would have a bunch of weird colors on your screen when you tried to boot up...

I am on AT&T. Read my first post. I ran custom roms then I went back to stock then upgraded to Froyo thru Mini Kies. My question was to find a way to see what BLs I had after a Kies update. It seems not to touch them on AT&T until GB is official because I just tested another GB rom & it works.
Sent from my SAMSUNG-SGH-I897 using xda premium

tablet won't start after installing custom rom

Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!

it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/

Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App

bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)

espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App

And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App

espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?

Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA

priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App

You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121

yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA

I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium

priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?

Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?

bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?

yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA

Galaxy s gt i9000 ics rom

Hey guys im trying to.put ics on my phone but not.having much luck lol am not very good at this lol any help would be great my phone is rooted its on 2.2.1 at the minute just really want ics on it please help me pleeeaaaasssseeeee
Sent from my GT-I9000 using xda premium

scouse83 said:
Hey guys im trying to.put ics on my phone but not.having much luck lol am not very good at this lol any help would be great my phone is rooted its on 2.2.1 at the minute just really want ics on it please help me pleeeaaaasssseeeee
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
You need to be on Gingerbread first before you can flash your phone with an ICS ROM. The following web site gives an easy step by step tutorial plus download links to get ICS on your SGS.
http://www.theandroidsoul.com/android-4-0-4-rom-galaxy-s/
Ray.

or get 2.3.x updated from kies , than root it and then do cyan9 , its best. worked like charm. just read the instructions and follow it.

Kies says am upto date with latest software can i get gingerbread without kies?
Sent from my GT-I9000 using xda premium

You can update your device till 2.3.6.
Unfortunatelly I only have a german page with the explanation.
Actual firmware you find here for example: http://forum.xda-developers.com/showthread.php?t=1570488
I think in this thread the users could help you.

Yes, using the Odin. Look here:
w*w*w.theandroidsoul.com/galaxy-s-gets-android-4-0-based-aokp-rom/
For install ICS, you need first install a GB 2.3.6 rooted, look here :
w*w*w.theandroidsoul.com/xxjvu/
end enjoy.
Atencion, take very carefull in this journey. Read all with very carefull.
Sorry for my poor english.

BEWARE: You are coming from Froyo - so you have to flash an android version that includes a socalled "bootloader" (some versions don't include that, as far as I know).
Reed carefully first before flashing.

Thanks guys I did it through Odin now on 4.0 whoooooo lol
Sent from my GT-I9000 using xda premium