Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!
it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App
And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App
You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?
bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA
Related
Hey guys. I am new to android. I just installed the OverCome Rom to my Galaxy Tab Asia Model and I thought of uninstalling it because I think I wanna use the original firmware. Anyone can teach me how to uninstall the overcome rom and flash my Glaaxy Tab to my original firmware? Thank you guys
What is your original firmware? If its froyo, flash rotohammers rom, then your original.
Yup its froyo. Do u have any tutorial cause im not that good with this
Sent from my GT-P1000 using XDA App
Roszaidee said:
Yup its froyo. Do u have any tutorial cause im not that good with this
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
do you want to reflash froyo overcome? Or return your tab back to standard, any case, you should be safe if you do a Odin flash back to a rotohammer froyo, then the froyo rom of choice, just follow the overcome instructions but switch the roms for what I said
swyped from a galaxy far far away...
i wanna make my galaxy tab back to normal, just like a freshly baked cake out from the box. can you tell me what firmware do i need to use? im using asia Galaxy Tab. cause im not the expert, this OverCome rom my uncle helped me to do it now hes away, i cant undo it =(
based on the firmwares found on samfirmware, there are different stock asian firmwares available. there is an Indian version (P1000DD), south east asian version (P1000DX), Hong Kong version (P1000ZH) and Taiwan version (P1000ZT).
i myself keep 2 froyo firmwares to go back to:
P1000DXJK2 - which was the firmware that came with my tab when i bought it sometime in december.
P1000DXKM3 - which was posted sometime in february/march that i got from a thai forum.
Singapore galaxy tab should be south east asian right?
Sent from my GT-P1000 using XDA App
yup. SouthEast Asian Firmware is for you, same as mine.
you could check my other post related to this matter.
Post 62
hope this helps.
So i just follow the exact steps and use the exact same files?
Sent from my GT-P1000 using XDA App
Can you give me the link for the galaxy tab latest south east asian firmware?
Sent from my GT-P1000 using XDA Premium App
Roszaidee said:
So i just follow the exact steps and use the exact same files?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Yup, these are the exact same files and same steps i use when i restored back to froyo.
Roszaidee said:
Can you give me the link for the galaxy tab latest south east asian firmware?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
i believe p1000DXKM3 is the latest stock firmware released/leaked to the public right now. it is still Froyo 2.2 though.
here in the philippines i'm still waiting for an official release of stock Gingerbread 2.3.3 for our region.
I see i see. Thank you very much brahh!
Sent from my GT-P1000 using My Hands To Type
no problem..
broo. i need help ! my galaxy tab keeps showing the samsung boot logo. any help pleasee?
what has happened exactly?
you could try powering down your tab first.
then try entering recovery mode (done by pressing volume up + power button).
wipe your cache and then afterwards restore to factory settings.
unable to change my Galaxy Tab (GSM) rom from Custom overcome to Rotohammer or any st
Hi guys, I read the post and tried Rotohammer but it failed in the start hanging at "Connection setup" then shows fail. Can anybody suggest how to remove this Custom ROM Overcome_v1.6.4 and install any Foroyo stock rom.
Tausif330 said:
Hi guys, I read the post and tried Rotohammer but it failed in the start hanging at "Connection setup" then shows fail. Can anybody suggest how to remove this Custom ROM Overcome_v1.6.4 and install any Foroyo stock rom.
Click to expand...
Click to collapse
Hi I'm a noob myself but I assume you can just follow the overcome guide to go back to stock?... basically, go into download mode And flash "overcome stock froyo safe" using Odin. I may well be missing something but wehenever I mess up and my tab won't boot, I just re-flash...
This is my first attempt at offerring help to anyone here, if i'm wrong please tell me! (Nicely!)
Sent from my GT-P1000 using XDA App
Hi,
Is it possible to upgrade with the recently leaked European Gingerbread 2.3.4 image to the Bell's Vibrant I9000M?
I'm currently running Froyo 2.2, firmware UGKC1. Have downloaded the official 2.3.4 from samfirmware.com and already rooted and unlocked my phone.
gurwindersng said:
Hi,
Is it possible to upgrade with the recently leaked European Gingerbread 2.3.4 image to the Bell's Vibrant I9000M?
I'm currently running Froyo 2.2, firmware UGKC1. Have downloaded the official 2.3.4 from samfirmware.com and already rooted and unlocked my phone.
Click to expand...
Click to collapse
It is... i would suggest going this route instead of through the one from samfirmware.
I use darky's ROM. I upgraded to 10.1 (it is 2.3.3), then recently upgraded via CWM to Dark Core 2.7.3 (which has the 2.3.4 GB firmware). Beware that the core is beta at this time, and so far in 2 days i haven't had any real issues on my phone.
www.darkyrom.com, then check the forums.
We are quite in Sync. Co-incidentally I upgraded to Darky's ROM(10.1) about an hour back. I'll give a try to the Beta now. Pls do share your experience with the beta overtime.
Thanx
gurwindersng said:
We are quite in Sync. Co-incidentally I upgraded to Darky's ROM(10.1) about an hour back. I'll give a try to the Beta now. Pls do share your experience with the beta ove.rtime.
Thanx
Click to expand...
Click to collapse
So far so good... other than my battery. Although i do have a momax 2700mah battery, it only lasted 30ish hours before it died... including using superpower to manage night time usage. I should be getting more than that with this battery (and i have done the reconditioning with the battery since i got it).
Even with 10.1 i got a day and a half or so... but the half day doesn't work for me as i need it for a full day.
Now that i've done one round of recondition on my battery, i'm anxious to see how good the battery will last now.
10.1 works with the JVP kernel fine (at least some of the features for it). I had to upgrade gtalk to the video talk version myself though (although i'm sure it'll be included in the next darkyrom).
Let me know what you think of it...
Hey guys i am also on the I9000M through bell and would love to get the gingerbread on here but the last time i tried i couldnt connect to my 3g for wireless and i couldnt call out or recieve calls please tell me the guide you used because man that gingerbread was fast and smooth.
Right now heres what my phone status is
Model number GT I9000M
Firmware version 2.2
Baseband version I9000UGKC1
Kernel version 2.6.32.9
[email protected] #4
Build number FROYO UGKC1
Thanks in advance for any help
ps my phone is already rooted
you can get gingerbread, but you need to take the extra step of flashing the kc1 modem, or do the 850 band tweak on a euro modem
Sent from my GT-I9000 using XDA App
And is there a tutorial for that?
And thanks.
Sent from my GT-I9000M using XDA App
bambam1978 said:
And is there a tutorial for that?
And thanks.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Just flash kc1 in odin or search for 850 enabled modems.
Swyped from a galaxy far far away.
Can i fladh it with cwm and if i have to use odin which slot does it go in?
Thanks for the response.
Sent from my GT-I9000M using XDA App
bambam1978 said:
Can i fladh it with cwm and if i have to use odin which slot does it go in?
Thanks for the response.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Yes perka has a cwm flashable kc1 modem. If you use odin it goes in the phone column.
Swyped from a galaxy far far away.
YEEESSSSSSS I finally got exactly what I wanted! Thank you everyone!!!!
Sent from my GT-I9000 using XDA App
I want to upgrade my Samsung Galaxy s Vibrant BELL to Gingerbread 2.3.4
Can some one help me,
I want to upgrade my Samsung Galaxy s Vibrant BELL to Gingerbread 2.3.4
I need instruction and right tools to download for upgrading
I need instruction and right tools to root my phone
I need instruction and right tools to flash my phone.
joelhon said:
Just flash kc1 in odin or search for 850 enabled modems.
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
Do you do the KC1 modem AFTER the GB firmware flash or during?...
ccrows said:
Do you do the KC1 modem AFTER the GB firmware flash or during?...
Click to expand...
Click to collapse
I could say after if you using Odin.
But before starting ask yourself what do you really want....
Just the 2.3.4 stock or a custom rom (like Darky's), rooted?, Aply a new theme?
ENO_qc said:
I could say after if you using Odin.
But before starting ask yourself what do you really want....
Just the 2.3.4 stock or a custom rom (like Darky's), rooted?, Aply a new theme?
Click to expand...
Click to collapse
So far just the stock. I'm growing impatient waiting around for Bell...
Sent from my MB860 using XDA Premium App
Actually I just want 2.3.4 with BLN and I would be happy...
Sent from my MB860 using XDA Premium App
ccrows said:
Do you do the KC1 modem AFTER the GB firmware flash or during?...
Click to expand...
Click to collapse
Anyone?...
Sent from my MB860 using XDA Premium App
ccrows said:
Anyone?...
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I answered you two post ago.....
Sent from my GT-I9000 using Tapatalk
Well, here's the history how I got my phone Samsung Galaxy S I9000 bricked.
5 months ago, I rooted my phone with One Click Lag Fix, and recently it's starting to force closing my apps, so I decided to factory reset my phone.
After that, my phone nows only boot into the splash screen, and vibrates once, and then twice ( I think it means force close.)
Any help would be nice. Help! I really need to get my phone fix.
You need to download Odin and any gingerbread or froyo rom you please, and flash with Odin, would you like me to explain how??
Sent from my GT-I9000 using XDA Premium App
...I'd suggest Clockwork instead w/busy box...
★ Message sent from my T-Mobile G2x with CyanogenMod ★
<3 My Google Android - CyanogenMod 7.1 #81 with Google Android 2.3.4 (Gingerbread)
michaelstigers said:
...I'd suggest Clockwork instead w/busy box...
★ Message sent from my T-Mobile G2x with CyanogenMod ★
<3 My Google Android - CyanogenMod 7.1 #81 with Google Android 2.3.4 (Gingerbread)
Click to expand...
Click to collapse
That wouldn't do anything, from the sounds of it his bootloader is corrupt, he needs to go back to basics and restart dude
Sent from my GT-I9000 using XDA Premium App
djice000 said:
That wouldn't do anything, from the sounds of it his bootloader is corrupt, he needs to go back to basics and restart dude
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA Premium App
unbrick with the JIG method !!
Core_Master_ROM said:
unbrick with the JIG method !!
Click to expand...
Click to collapse
Its not bricked....his bootloader is corrupt
Sent from my GT-I9000 using XDA Premium App
djice000 said:
You need to download Odin and any gingerbread or froyo rom you please, and flash with Odin, would you like me to explain how??
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yes I would love you to help me explain.
I have no experince in odin... So it's going to be a hard time explaining to me.
But if you managed to fix my phone. It'll be HEAVENS!
Bump due to that my phone isn't fixed yet.
HELP!!
OK: Go to http://forum.xda-developers.com/showthread.php?t=1102881#14273114
Download Odin, pick a stock firmware for your region (for now try to match it to froyo 2.2 (or 2.2.1) or GB 2.3.3 (or 2.3.4).
Follow the guides on the linked thread, reflash (I'd try without repartitioning to start), test.
follow up with any questions or problems once you look and try the stuff linked.
G
Is there a working ICS ROM for the "old" 7'' Galaxy Tab, CDMA Verizon's SCH-I800?
Thanks!
http://rootzwiki.com/topic/11697-rom-cdma-aosp-ics-cm9-build-5-0218/
Sent from my Galaxy Nexus using XDA App
Thanks! Do we have corresponding topic here, on XDA?
Nope
Sent from my Galaxy Nexus using XDA App
Thanks again. Just one more question: how to flash? I have a first GB 2.3.4 for CDMA (ported from GB Sprint, I believe so) flashed with Heimdall but there is no correct CWR installed. Should I install Galaxy Cubed 3 or similar ROM first? Or how to install this ROM using Heimdall? Sorry but I can't find the answer on the forum mentioned above....
I've asked some people about how to flash this with no help. And as you can see no one really cares to much about the VZW SGT, well the SCH-I800 anyways. Rite now i'm happy with just having root.
gaarak54 said:
I've asked some people about how to flash this with no help. And as you can see no one really cares to much about the VZW SGT, well the SCH-I800 anyways. Rite now i'm happy with just having root.
Click to expand...
Click to collapse
Derp
Sent from my Galaxy Nexus using xda app-developers app
sensboston said:
Thanks again. Just one more question: how to flash? I have a first GB 2.3.4 for CDMA (ported from GB Sprint, I believe so) flashed with Heimdall but there is no correct CWR installed. Should I install Galaxy Cubed 3 or similar ROM first? Or how to install this ROM using Heimdall? Sorry but I can't find the answer on the forum mentioned above....
Click to expand...
Click to collapse
Any luck??
Last we heard, CyanogenMod 9's interaction with the Galaxy Tab 10.1 line was limited to the variants shackled either to T-Mobile or to WiFi. However, the CM team has been hard at work, and as of yesterday, the following three editions of the 10-inch tablet have been granted access to the CM nightly kingdom: Verizon's Galaxy Tab 10.1 (SCH-I905)
Unlocked WiFi + 3G Galaxy Tab 10.1 (GT-P7500)
Galaxy Tab 10.1v (GT-P7100)
Click to expand...
Click to collapse
Source
Let the download begin. And many thanks for all users who contributed to it.
Link to nightly builds: http://get.cm/?device=p3
Change Log for nightlies: http://changelog.bbqdroid.org/#p3/cm9/next
Flash pershoot's recovery from http://droidbasement.com/db-blog/?p=2487 first. Make sure to download the P3 version
Optionally and recomended: Flash latest pershoot's kernel from http://droidbasement.com/db-blog/
Ok but if i flash my gtab, the camera works??
Thanks
So it begins...
I think we can't be more grateful to pershoot (and also isi, seo and the others 10.1v dev) to make it possible. Without them, we could only have dreamed to see our tab updated at all. Now we'll have almost daily updates...
DannyBiker said:
So it begins...
I think we can't be more grateful to pershoot (and also isi, seo and the others 10.1v dev) to make it possible. Without them, we could only have dreamed to see our tab updated at all. Now we'll have almost daily updates...
Click to expand...
Click to collapse
Couldnt have said it any better, therefore i wont.
Sent from my QW TB-1207 using xda premium
jipils said:
Ok but if i flash my gtab, the camera works??
Thanks
Click to expand...
Click to collapse
No. I think it's based on isi and pershoot work, so the only changes probably will be more CM9 settings
I wonder if any of these are any more stable than the latest from the usual sources that pershoot has been giving us so far. I know it's based on his and Isi's work so I am just wondering
I cant flash it. Error on Cwm
Enviado desde mi GT-N7000 usando Tapatalk 2
osquitar said:
I cant flash it. Error on Cwm
Enviado desde mi GT-N7000 usando Tapatalk 2
Click to expand...
Click to collapse
Flash recovery from this site first.
http://droidbasement.com/db-blog/?p=2487
I guess youve got other version cwm
Sent from my GT-I9000 using XDA Premium HD app
Hi richard.
Thanks a lot for your help. I flashed it and then the gapps from ISI web and it doesn´t work.
Do you know if there specific gapps for this ROM and where can I get them?
Thanks in advance
Flash recovery
Sorry I'm new to all this stuff, how do I flash this file? Odin? and if so do I use the PDA option?
Would be extremely grateful as I've tried a few times but keep getting errors
kaisnowy said:
Sorry I'm new to all this stuff, how do I flash this file? Odin? and if so do I use the PDA option?
Would be extremely grateful as I've tried a few times but keep getting errors
Click to expand...
Click to collapse
The file can't be flashed with odin.
It has to be flashed through cwm, but first you have to unlock your bootloader and aquire root.
Unlock your bootloader with this tut.
http://forum.xda-developers.com/showthread.php?t=1064793
Get root via this....
http://forum.xda-developers.com/showthread.php?t=1079781
Then copy cm9 file to tab and install through cwm.
Sent from my GT-P7100 using XDA Premium HD app
CM9 google apps
osquitar said:
Hi richard.
Thanks a lot for your help. I flashed it and then the gapps from ISI web and it doesn´t work.
Do you know if there specific gapps for this ROM and where can I get them?
Thanks in advance
Click to expand...
Click to collapse
Here are the CM9 ones
wiki.cyanogenmod.com/wiki/Latest_Version#Google_Apps
Hope it helps, if only I could actually flash CM9 successfully lol
osquitar said:
Hi richard.
Thanks a lot for your help. I flashed it and then the gapps from ISI web and it doesn´t work.
Do you know if there specific gapps for this ROM and where can I get them?
Thanks in advance
Click to expand...
Click to collapse
Try gapps from here... Be sure to pick cm9 gapps.
Inst through cwm
http://wiki.cyanogenmod.com/wiki/Latest_Version/Google_Apps
Sent from my GT-P7100 using XDA Premium HD app
Wrong CWM
richard2311 said:
The file can't be flashed with odin.
It has to be flashed through cwm, but first you have to unlock your bootloader and aquire root.
Then copy cm9 file to tab and install through cwm.
Sent from my GT-P7100 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, I already have unlocked the bootloader and gotten root, but I think I may have flashed the wrong ClockworkMod Recovery (i.e the one for the galaxy tab 10.1. What is the correct file? and how do I fix it ie reflash it?
kaisnowy said:
Thanks, I already have unlocked the bootloader and gotten root, but I think I may have flashed the wrong ClockworkMod Recovery (i.e the one for the galaxy tab 10.1. What is the correct file? and how do I fix it ie reflash it?
Click to expand...
Click to collapse
Get the correct recovery from here.
http://droidbasement.com/db-blog/?p=2487
Put the file somewhere on your pc.
The go into fasboot mode and type :
Fastboot flash recovery <path> recovery.img
Sent from my GT-P7100 using XDA Premium HD app
.tar.md5
richard2311 said:
Get the correct recovery from here.
Put the file somewhere on your pc.
The go into fasboot mode and type :
Fastboot flash recovery <path> recovery.img
Sent from my GT-P7100 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks I understand those steps but whats confusing me is the .tar.md5, how do I turn that into a recovery.img?
Thanks for the help so far
kaisnowy said:
Thanks I understand those steps but whats confusing me is the .tar.md5, how do I turn that into a recovery.img?
Thanks for the help so far
Click to expand...
Click to collapse
So sorry youre right this one has to be flashed through odin 1.85.
Go into download mode, start odin and connect tab.
Put.... tar IN PDA and flash.
Sent from my GT-P7100 using XDA Premium HD app
OK thanks so what does this file do? Will it fix my problem of having the wrong clockworkmod recovery?
Sent from my Galaxy Nexus using xda premium
kaisnowy said:
OK thanks so what does this file do? Will it fix my problem of having the wrong clockworkmod recovery?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes, be sure to pick the gt-p7100 recovery
Do not tick repartition
Sent from my GT-P7100 using XDA Premium HD app
Hey thanks for all the help Richard it all worked out fine
Sent from my Galaxy Nexus using xda premium