Database Develop

{Development}Evo-Derived one click root method.

Current Status 7/14
Without the NAND being unlocked, we are unable to re-write to the recovery partition. Other than that everything is working good. Unlocked NAND=One Click Root!
This method is directly based on the new root process for the Eris released on xda.
Original thread can be found here
The following information is taken directly from the thread mentioned above with some small modifications by me for the Incredible.
Big thanks to tereg for the toolkit and the guys who rooted the EVO with a file write/chmod race condition exploit that gave me the idea for this.
jcase noticed that a race isn't actually nessisary to exploit the chmod 777 on the file I've been working with, simplifying the script alot.
I used the files from the adb development pack that Tereg put together. Download them here. You don't need them for this root process as long as you have a working adb install.
You will need adb access. Install the android sdk for your platform (macos, windows, linux) get it for your OS here.
If you don't know how to install the sdk, search xda, there are a ton of howtos for that.
Files to download:
hack-v5-DINC.zip
A ROM file
Android SKD (skip if you have a working adb)
Instructions for linux/OSX.
Have adb in your path, or move the files contained in hack-v5-DINC.zip into your sdk/tools directory so your pushes will work properly.
FOR ALL OS's Make sure your phone has Applications->Development->USB Debugging turned on.
Do NOT have your phone in Disk Drive Mode, have it in Charge Only.
Open a terminal window in your /tools/ directory. Type this at the prompt.
Code:
sh runinlinux.sh
This will take a few minutes, follow the instructions on your screen.
If you get adb: command not found, edit runinlinux.sh and change every
Code:
#/bin/bash
adb push flash_image /data/local/
adb push recovery.img /data/local/
adb push testfile /data/local/
etc...
to
Code:
./adb push flash_image /data/local/
./adb push recovery.img /data/local/
./adb push testfile /data/local/
etc...
Instructions for windows (thanks tereg!)
Download the hack.zip file and extract it to the desktop. So, you have a folder on the desktop called hack. I would recommend moving or copying those files (EDIT: that are contained in the hack folder) to the C:\android-sdk-windows\tools folder. Why? Because the script runs "adb ____" commands, and unless you've set up adb to be able to run anywhere within the command prompt, the script won't run. So, it will universally work if the files in the hack folder are placed in C:\android-sdk-windows\tools
So, open a command prompt by pressing WindowsKey+R, or going to Start-Run (in WinXP) and typing
Code:
cmd
in the text box there and press OK
If you are in Windows Vista/Windows 7, go to the Start Menu, then type in
Code:
cmd
in the search bar in the lower right-hand corner of the start menu and press enter, and locate Command Prompt in the search results, or go to Start -> All Programs -> Accessories -> Command Prompt
Type
Code:
cd C:\android-sdk-windows\tools
and press enter
Now, I recommend pushing the ROM you want to flash to the SD card now.
Code:
adb push ROM.zip /sdcard
Then, type
Code:
runindos.bat
to execute the script.
You might have to run it 2 or 3 times for it to work. If it fails, just reboot the phone normally, then run
Code:
runindos.bat
again once the phone is booted back up and you're ready.
----------(Thanks again tereg!)
It will scan for a long time, give it at least 5 minutes. If it doesn't come back after 5 minutes cntrl +c to stop it, start the process again. MOST PEOPLE HAVE TO RUN THIS AT LEAST TWICE!
If your device reboots into a new screen with options on it, you now have root in recovery mode. At this point you will be flashing your Incredible's brains, so YOUR PHONE WILL BE BLANK AFTER LOADING A NEW ROM! All of your apps/numbers will be gone from the phone.
I suggest a nand backup first.
Download and copy one of these ROM's to your sdcard as update.zip and flash it with flash zip from sdcard by selecting "Install zip from sdcard".
The first boot after loading a new ROM takes quite a while to show any activity to the screen. Give it a good 5 minutes before you start wondering if it's ever going to come back.
---
runinlinux.sh
---
Code:
#/bin/bash
adb push recovery.img /data/local/
adb push flash_image /data/local/
adb shell chmod 777 /data/local/recovery.img
adb shell chmod 777 /data/local/flash_image
adb shell rm /data/local/rights/mid.txt
adb shell ln -s /dev/mtd/mtd1 /data/local/rights/mid.txt
echo "Files copied and permissions set, rebooting HTC Andriod 2.1"
adb reboot
echo "Your phone will now reboot into normal mode, then reboot into recovery mode. If it does not reboot the second time, wait 10 minutes and manually reboot and begin again."
echo "Your phone is now rebooting in Rooted Recovery mode, do a backup and load your ROMs"
adb wait-for-device
adb shell /data/local/flash_image recovery /data/local/recovery.img
adb reboot recovery
---
runindos.bat
---
Code:
@echo off
adb push recovery.img /data/local/
adb push flash_image /data/local/
adb shell chmod 777 /data/local/recovery.img
adb shell chmod 777 /data/local/flash_image
adb shell rm /data/local/rights/mid.txt
adb shell ln -s /dev/mtd/mtd1 /data/local/rights/mid.txt
echo "Files copied and permissions set, rebooting HTC Andriod 2.1"
echo "Your phone will now reboot into normal mode, then reboot into recovery mode. If it does not reboot the second time, wait 10 minutes and manually reboot and begin again."
adb reboot
adb wait-for-device
echo "Your phone is now rebooting in Rooted Recovery mode, do a backup and load your ROMs"
adb shell /data/local/flash_image recovery /data/local/recovery.img
adb reboot recovery
This thread is intended to be an think-tank, similar to the one on the eris forums where I got the idea from. Let the ideas flow!

has this been tested to work on the INC? if not why has this been posted.

outsid0r said:
has this been tested to work on the INC? if not why has this been posted.
Click to expand...
Click to collapse
uhm....do you read?
"This thread is intended to be an think-tank, similar to the one on the eris forums where I got the idea from. Let the ideas flow!"
no. this is not working yet. thats why the title even has {development} in it. the process is almost working, and this is a develpoment thread to work out the issue-which is also in big letters at the top...see where it says
"Without the NAND being unlocked, we are unable to re-write to the recovery partition. Other than that everything is working good. Unlocked NAND=One Click Root!"

So once we solve a much more difficult problem, the less difficult will be easier.
Makes sense.

We already know how to unlock the nand vs the exploit posted last night...also unrevoked will have it done In a few days anyway
Sent from my HTC Incredible using the XDA App

adrynalyne said:
So once we solve a much more difficult problem, the less difficult will be easier.
Makes sense.
Click to expand...
Click to collapse
the difficult problem has already been solved. the unrEVOked team already has the NAND unlocked. now its whether they want to share and make it a true one-click root method, or if they are going to keep it a secret and keep koush's clockworkmod recovery as the only possibility. this tool still uses the clockworkmod recovery, but after a NAND unlock your given the option to change. since koush is working for them too, im starting to think more and more that they are going to keep the monopoly.
im hoping that they will just incorporate their NAND unlock method into this root process. they can even re-lock it after the process is done as they do in their re-flash tool to preserve the monopoly, but a true one-click root is now possible with their co-operation. ive messaged them asking if they want to help out. we will see soon enough, so cross your fingers!

they can even re-lock it after the process is done as they do in their re-flash tool to preserve the monopoly
Click to expand...
Click to collapse
You just lost a ton of respect from me, and I suspect more than a few others. Talk about biting the hand that feeds you.

adrynalyne said:
You just lost a ton of respect from me, and I suspect more than a few others. Talk about biting the hand that feeds you.
Click to expand...
Click to collapse
So I see we have this starting up again....shakes head at OP..
@adrynalyne best to just ignore these people...its not like the winmo days is it man? Le sighe

Good advice, you are right. I will ignore this stuff in the future.
No, not like the winmo days at all. I've never seen so much anomisity and jealousy in a community before like there is for Android.

All I can say is we already intended to release this method, we were making a pretty robust obfuscation for it. But again the community has jumped before thinking and posted the bug for HTC to fix. There might not be any root's left after this one is burnt. Which it now is. Our tool will be released as is soon enough.
We don't care to create a monopoly, we happily work with others that ASK. Those that just jump and tell the world all the secrets we don't want plugged are just stupid, plain and simple.

adrynalyne said:
You just lost a ton of respect from me, and I suspect more than a few others. Talk about biting the hand that feeds you.
Click to expand...
Click to collapse
LOL Whatever, it isnt like respect from you is something anyone cares about. I like someone with the nerve to speak the truth no matter how unpopular it might be.

outsid0r said:
has this been tested to work on the INC? if not why has this been posted.
Click to expand...
Click to collapse
Please read. Think tank! I applaud this dude for trying. More than many others do here!

fader01 said:
LOL Whatever, it isnt like respect from you is something anyone cares about. I like someone with the nerve to speak the truth no matter how untrue it might be.
Click to expand...
Click to collapse
Fixed that for ya.

adrynalyne said:
You just lost a ton of respect from me, and I suspect more than a few others. Talk about biting the hand that feeds you.
Click to expand...
Click to collapse
Shadowmite said:
All I can say is we already intended to release this method, we were making a pretty robust obfuscation for it. But again the community has jumped before thinking and posted the bug for HTC to fix. There might not be any root's left after this one is burnt. Which it now is. Our tool will be released as is soon enough.
We don't care to create a monopoly, we happily work with others that ASK. Those that just jump and tell the world all the secrets we don't want plugged are just stupid, plain and simple.
Click to expand...
Click to collapse
it seems like my comment was taken the wrong way.
for one, clockworkmod recovery is the only one that works on the DINC AFAIK, amon_ras isnt working on here either.
the monopoly is basically a monopoly because of the lack of other available options, not necessarily because its enforced.
i apologize if it came off the wrong way or insulted anyone with the preceding comments.
i meant this thread as a co-operative think-tank, it wasnt my intention to start a big ordeal.

adrynalyne said:
Good advice, you are right. I will ignore this stuff in the future.
No, not like the winmo days at all. I've never seen so much anomisity and jealousy in a community before like there is for Android.
Click to expand...
Click to collapse
@adrynalyne yeah its a real rough community at times, but what ya gonna do right...its hard for me to ignore them at times too
@shadowmite. thanks for your guys hard work....the ignorant ones are everywhere nowadays, hope they don't get you guys down.
Cheers!

Shadowmite said:
All I can say is we already intended to release this method, we were making a pretty robust obfuscation for it. But again the community has jumped before thinking and posted the bug for HTC to fix. There might not be any root's left after this one is burnt. Which it now is. Our tool will be released as is soon enough.
We don't care to create a monopoly, we happily work with others that ASK. Those that just jump and tell the world all the secrets we don't want plugged are just stupid, plain and simple.
Click to expand...
Click to collapse
hmm. well i guess thats what happens when people try to help out the community...maybe next time i just wont do anything... :/
and FYI...i did contact you. i sent you a PM earlier today.
this method has been used on the EVO and hasnt been plugged, and its been in the works on the Eris-also an HTC phone- for quite a long time, and in the same way this is...a co-operative community effort to make the phone the best that it can be.And its still not been plugged.
id worry less about HTC plugging the exploits and more about getting the exploits available to the public.

Correct, you are not the original one leaking the method. But my point is devs capable of finding things like this should be capable of thinking about it being plugged. HTC fixed our recovery hold in the next OTA. Now it's quite possible nand and this root will be patched also. we have NO OTHER WAYS IN... Thats it. besides some VERY complicated exploits we are OUT after the next ota.
I got your pm's, but only after you posted this.
It's a moot point, our one click root is due out in a few minutes. we were going to further lengths to protect the method, but it's out anyway at this point.

Shadowmite said:
Correct, you are not the original one leaking the method. But my point is devs capable of finding things like this should be capable of thinking about it being plugged. HTC fixed our recovery hold in the next OTA. Now it's quite possible nand and this root will be patched also. we have NO OTHER WAYS IN... Thats it. besides some VERY complicated exploits we are OUT after the next ota.
I got your pm's, but only after you posted this.
It's a moot point, our one click root is due out in a few minutes. we were going to further lengths to protect the method, but it's out anyway at this point.
Click to expand...
Click to collapse
well i apologize for the fact that i may/may not have ruined your chances to make a big announcement for your release, but IMO its kinda bs that you keep the info on lockdown. the whole point of android is that its open. a select amount of people shouldnt consider themselves the gatekeepers of important information.

ban_dover said:
well i apologize for the fact that i may/may not have ruined your chances to make a big announcement for your release, but IMO its kinda bs that you keep the info on lockdown. the whole point of android is that its open. a select amount of people shouldnt consider themselves the gatekeepers of important information.
Click to expand...
Click to collapse
From our wiki, which you appearently haven't read:
http://unrevoked.com/rootwiki/doku.php/public/unrevoked2
That doesn't seem fair! Android is about open source.
In some senses, we agree; but at times, a tradeoff needs to be made. Releasing the source code for this, we believe, would compromise the greater ability to unlock devices like these in the future. Given the choice between sacrificing the liberty of running code on our handsets and the liberty of reading the code by which we unlock it, we feel that the millions of handsets are more important. It is unfortunate that we must make such a choice, and we look forward to the day in the future that no such decision need be made.
Click to expand...
Click to collapse

Shadowmite said:
From our wiki, which you appearently haven't read:
Click to expand...
Click to collapse
already read it.
i dont take my opinions from things i read. i take the information and draw my own conclusions. and in this case my conclusion is that, while i can see your point i still disagree.

[TOOL] redbend modification

I hacked on redbend_ua to make it a better phone hacking tool
first thing that has to go was the rebooting after any command
and the second thing was the stupid installing software splash screens
the first mod will probably segfault if used to batch install delta files
as I suspect there is some more code to update the progress bar on
the now NOP'ed installing software splash screen.
the second mod has batch mode NOP'ed so it wont do anything unless
you pass the dump,restore or compare commands which is fine for scripting
zImage and modem.bin installs.
/* This program is free software. It comes without any warranty, to
* the extent permitted by applicable law. You can redistribute it
* and/or modify it under the terms of the Do What The **** You Want
* To Public License, Version 2, as published by Sam Hocevar. See
* http://sam.zoy.org/wtfpl/COPYING for more details. */
Click to expand...
Click to collapse

Nice thanks
Sent from my vibrant

untermensch said:
I hacked on redbend_ua to make it a better phone hacking tool
first thing that has to go was the rebooting after any command
and the second thing was the stupid installing software splash screens
the first mod will probably segfault if used to batch install delta files
as I suspect there is some more code to update the progress bar on
the now NOP'ed installing software splash screen.
the second mod has batch mode NOP'ed so it wont do anything unless
you pass the dump,restore or compare commands which is fine for scripting
zImage and modem.bin installs.
Click to expand...
Click to collapse
sorry if this is dead info but how is this a tool? i need as many tools as possible. and i do not understand is there a place for specific knowledge on this that may go into a bit more detail?

justlovejoy said:
sorry if this is dead info but how is this a tool? i need as many tools as possible. and i do not understand is there a place for specific knowledge on this that may go into a bit more detail?
Click to expand...
Click to collapse
redbend_ua is used for installing OTA updates, but it also has other functions.
RedBend Update Agent %s
commands:
img [partition name] [delta file] [device node] [temp path]
fs [partition name] [delta file] [mount point] [temp path]
all
dump <source dev> <dest file>
restore <source file> <dest dev>
compare <dev1> <dev2>
png [png file name]
all
Click to expand...
Click to collapse
normally when you run a command it will take over the screen with a "Installing Software"
splash, and then reboot. you can get around the reboot by unlinking reboot but that is kinda
a kludge and the splash usually just scrambles the screen.
the mod does away with the splash and the reboot making redbend_ua less annoying to use.
you could even probably install kernels and modems without rebooting into recovery, though
you will have to reboot to use the new code.
for example if you want to install a kernel the command might look something like this
Code:
/data/local/redbend_ua restore /sdcard/zImage /dev/block/bml7

So I'm bumping this because tbh I was a little surprised to see it die out. I was expecting more to come out of it. I imagine you could potentially create an app to flash kernels and modems and then you just reboot for it to take effect. Might be worth looking into...
Edit: I'm going to look into it. I feel this would be extremely convenient for multiple reasons.

Whitehawkx said:
So I'm bumping this because tbh I was a little surprised to see it die out. I was expecting more to come out of it. I imagine you could potentially create an app to flash kernels and modems and then you just reboot for it to take effect. Might be worth looking into...
Edit: I'm going to look into it. I feel this would be extremely convenient for multiple reasons.
Click to expand...
Click to collapse
Whitehawk, dude, kick some butt doing this! It would be very convenient
Sent from the helm of Vibrant Territory!

Whitehawkx said:
So I'm bumping this because tbh I was a little surprised to see it die out. I was expecting more to come out of it. I imagine you could potentially create an app to flash kernels and modems and then you just reboot for it to take effect. Might be worth looking into...
Edit: I'm going to look into it. I feel this would be extremely convenient for multiple reasons.
Click to expand...
Click to collapse
Guess what i already did: SGS kernel flasher
Btw: Thanks untermensch.

neldar said:
Guess what i already did: SGS kernel flasher
Btw: Thanks untermensch.
Click to expand...
Click to collapse
I saw that and briefly hacked into it to pack it with vibrant kernels - gave it 1 try which failed and I moved on because I assume you have a check in place that didnt let me replace the kernel. Like to see this for us though.
Edit - reading your signature, I must have been working from an early or I9000 version at the time.

[ROM] Adeo v0.2 (REDUX) for Atrix 4G

***MOD EDIT***
THIS ROM ONLY WORKS ON 4.1.26. Please consider another ROM unless you know what you are doing.
History & IntroThe first version was done with 3 different batch files, it ended up being very hacky and even ended up bricking one phone because the cleanup script didn't properly work.
I have rebuilt it from the ground up as a shell script. The initial temp root and file push is done with a batch file, it then fires off the install script on the phone which reports back to the batch with helpful info about what it is doing and what to expect from the phone as it goes. You no longer have to accept any superuser requests either.
The new script has been used on tons of phones now, everything executed exactly as I expected it to. I really didn't want to post this until we had a stock firmware to restore to, after the first release I have been worried about you guys bricking your devices, but what the hell, here it is anyways.
Come chat with us!​FeaturesWorks for rooted and non-rooted devices
Deodexed
Reboot Option
Reboot to Recovery option
Ad Blocking
Removed power options header​ChangelogAdeo v0.2: (3/9/2011)
Added Unknown Sources checkbox
Added Preferred install location (internal, sdcard, let system decide)​Adeo v0.1: (2/28/2011)
Reboot to Recovery option
Ad Blocking
Only remove app/framework Dalvik-Cache (fixes /data app issues)
Removed power options header​Four simple rulesDo NOT do a factory reset if something goes wrong(soft brick), you will lose adb access and have a pretty brick
Do NOT do this if you are not familiar with ADB, if you softbrick you need to use adb to fix it
DO NOT PULL THE BATTERY, EVER WHILE INSTALLING
BE PATIENT​How to Install
Read the four rules above
Read the four rules above, again
Read the four rules above, again, one more time to make sure you've got it
Download the installer (AdeoInstallerv0.1.7z, AdeoUpdaterv0.2.7z)
Hook up your phone via usb with ADB enabled
run INSTALL.bat from the unzipped files
sit back, relax, wait until it reboots (can take upto 5min, be patient!!)
Read the disclaimer below
Enjoy!
DisclaimerIf you brick your device, I cannot be held responsible. Simply restore with the stock SBF to get you phone working again.​Video Walkthru

Nice! First basic rom How would someone restore back to stop if you cant do a factory reset? I know on the captivate I had a nice Odin flash to do that.
Thanks

A custom ROM?
I'm going to have to buy an Atrix!
EDIT: Bought it!
EDIT2: And Adeo'd it. All UI lag is gone! This is awesome!

I am running this in my Atrix now - I believe my phone was the 4th phone to have this install perfectly on with no issues. Designgears, you are the man, once again! Thank you for this!

PM sent DG. I cheated an caught link a few minutes early and wanted say thanks! This is running great with no issues and I'm loving the reboot option...

Installed on mine, worked flawlessly. Thanks!

connexion2005 said:
PM sent DG. I cheated an caught link a few minutes early and wanted say thanks! This is running great with no issues and I'm loving the reboot option...
Click to expand...
Click to collapse
Haha, I understand your PM now... you got my file before I posted this.
psufan5 said:
Nice! First basic rom How would someone restore back to stop if you cant do a factory reset? I know on the captivate I had a nice Odin flash to do that.
Thanks
Click to expand...
Click to collapse
the factory reset is only if you brick.
There is no easy way to get back to stock, I will make a thing just like this installer to do that, actually its done, testing it

designgears said:
Haha, I understand your PM now... you got my file before I posted this.
the factory reset is only if you brick.
Click to expand...
Click to collapse
So if all else fails, the factory reset will bring it back to out of the box shape? Just concerned because Im still debating if I want to keep the phone before my 30 days is up etc. Id like to return it as stock obviously, but I also need to test out custom mods before my decision.
Thanks man.

I am curious, what changes were made for the reboot mod?
Also, thanks for the rom!

psufan5 said:
so if all else fails, the factory reset will bring it back to out of the box shape? Just concerned because im still debating if i want to keep the phone before my 30 days is up etc. Id like to return it as stock obviously, but i also need to test out custom mods before my decision.
Thanks man.
Click to expand...
Click to collapse
no no no, do not factory reset if it bricks!!! Read the op!!!!

shawnbuck said:
I am curious, what changes were made for the reboot mod?
Also, thanks for the rom!
Click to expand...
Click to collapse
smali edits in the framework.jar, android.policy.jar and added an image and sting to framework-res.apk

I saw the no factory reset posts lol... I was just curious what can be done to return the phone back to stock once this is all done with.
Thanks.

psufan5 said:
I saw the no factory reset posts lol... I was just curious what can be done to return the phone back to stock once this is all done with.
Thanks.
Click to expand...
Click to collapse
I designed this script to handle payloads, just need to package up one with a new payload with stock files and upload it.

Installed... Removed Laggyness i was getting with blur UI.
as to refering to the blur UI....
this is my second Atrix.. had to bring my first one back because when i was on tier 3 support the other night they fried the sim card reader with an update which was killing data signal to my phone... that phone had no laggyness whats so ever at all. I got this one today out of the box was having laggyness and slow response to key presses.. this fixed that as of so far.

designgears said:
smali edits in the framework.jar, android.policy.jar and added an image and sting to framework-res.apk
Click to expand...
Click to collapse
Nice, I will give this shot. Although I am already running DeOdexed already but I figured may be you got it running better than mine
I am also going to start editing small things like animations. No sense oh having all this power without some eye candy

Hello designgears,
Did you re-signed the apks? If so, could you share the key files you used? The reason I ask for it, it's because I am playing around with the /system/app apks and was getting errors like:
"Package com.motorola.blur.home has no signatures that match those in shared user"
Awesome job, btw!

Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.

uskr said:
Hello designgears,
Did you re-signed the apks? If so, could you share the key files you used? The reason I ask for it, it's because I am playing around with the /system/app apks and was getting errors like:
"Package com.motorola.blur.home has no signatures that match those in shared user"
Awesome job, btw!
Click to expand...
Click to collapse
Not sure, I didn't get an errors like that.
airbillion said:
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
Click to expand...
Click to collapse
Try a usb port on the back of your PC

airbillion said:
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
Click to expand...
Click to collapse
Download ADB Wireless from the Market. It'll help solve that one for you.

airbillion said:
Stupid question. How do I hook up the phone with adb enabled? When I run the bat file it says error: device offline, but in my devices I see ADB interface Mot Composite ADB interface.
Click to expand...
Click to collapse
Install the Android SDK
install the MOTO drivers it will also install the moto adb drivers with it.
Install the ADB function drivers into the SDK/tools folder
run...cd to the sdk/tools folder... run... adb devices
should show the device is up which means ADB is enabled

[2nd-init] Here is a working and tested 2nd-init for the Atrix

I have just finished porting 2nd-init to the Atrix. It was mostly a clean port from the Defy. I didn't modify the code, just compiled it. The work was in the install/wrapper. There was also a new issue, in that we have SMP, and the code expected non-SMP.
This opens up custom ROMs, like CM7. This does not unlock the bootloader or allow custom kernels.
BETA BETA BETA
It has been tested on AT&T 1.5.7 and 1.8.3. I recommend only developers play with this for now. It is not that useful be itself, but expect to see lots of new things happen based on this.
I welcome feedback. Also feel free to Donate via the "Donate to me" link under my username, top left, on XDA. The goal is to use donations to purchase hardware that will help me get kexec working, or finding a way to unlock the bootloader.
Enjoy!
Update 2
Brandon15811 and I made a 2ndinit apk based installer. It has been tested. I still advise caution when using this. It is based on the DroixXBootstrap code.
It requires SuperUser.apk to already be installed, and working.
Steps for the apk:
1. Get it on the phone however you like
2. Install the apk
3. Open Atrix 2ndinit
4. Click Install
5. Click OK when the dialog comes up
6. Install Android Terminal Emulator from the Market
7. Open Android Terminal Emulator
8. type ls -al /sys/kernel/debug<enter>
Update
I have added a change from NFHimself in version 1.0.1. It lets you disable it by using USB Early Enumeration. You do this by turning off the phone, turning it back on while holding the down arrow, using the down arrow till you see USB Early Enumeration, and then up arrow once to boot. I have tested change.
I am also working on some form of simpler installer. It may become as simple as an apk.
We know it breaks in it's current form with Gingerbread. Though we also know others have gotten it to work before on Gingerbread. I will also be working on 2nd-init for Gingerbread.
Thanks to eval!
Thanks to Brandon15811!
Thanks to xfinrodx!
Thanks to xvilka!
Thanks to PAuly!
Thanks to Skrilax_CZ!
Thanks to BravoMotorola!
Thanks to NFHimself!
DOWNLOAD
2nd-init apk
2nd-init tarball
README:
Info:
This method starts 2nd-init via mount_ext3.sh, which is line 108 of /init.rc.
My init.rc continues at line 109 with a couple tweaks.
Warning! This conflicts with Tenfar's ClockWorkMod(aka CWM) Recovery
If the phone is wall charging, you shut down the phone, and start it, it will boot CWM
To avoid this, open System Recovery and hit Charge Mode.
It may also conflict with other recovery tools, or other things that tweak the normal boot process.
Tweaks:
/sys/kernel/debug mounted
reboot on zygote crash commented out
Install:
Install SSHDroid from Market. It is free.
Make sure wifi is setup and working.
Run SSHDroid
Make sure it says it is running.
Fill in the ip address in the command below. SSHDroid will display it.
Windows:
Use WinSCP to put 2nd-init-1.0.1.tar.bz2 in /data
Linux/OSX, in a terminal window:
scp 2nd-init-1.0.1.tar.bz2 [email protected]:/data
Run these two commands on the phone via ssh.
Windows:
Use putty
Linux/OSX, in a terminal window:
ssh [email protected]
/bin/mount /system -o remount,rw
tar -C / -jxf /data/2nd-init-1.0.1.tar.bz2
Reboot phone, aka Power button, Turn off, Power button to turn on
Check if it worked by running the command below via ssh.
ls -a /sys/kernel/debug
Good Output:
. battery gpio hid mmc1 tegra_gpio tracing
.. bdi heap-generic-0 mdm_ctrl mmc2 tegra_pinmux usb
apanic cpcap-irq heap-iram mmc0 sched_features tegra_wakeup
Bad Output:
. ..
If the Output is good, then Congradulations you have control over init now!

Great work Edgan! Works perfect here. Nice eye with taskset =)

tenfar re-incarnate?

Niiice, great work

Awesome job. Good work!

Interesting!
Waiting for confirmation that this indeed is full 2nd-init.
Would love to try it, but am dubious at the moment.

I jizzed in my pants.

Great with 2.3 coming we will have a proper kernel Cyanogen Mod! Awesome stuff!

wow! good work!

CaelanT said:
Interesting!
Waiting for confirmation that this indeed is full 2nd-init.
Would love to try it, but am dubious at the moment.
Click to expand...
Click to collapse
Once again, THIS IS THE REAL DEAL FOLKS. PEOPLE HAVE TRIED THIS AND IT HAS WORKED, I REPEAT IT DOES WORK.

Nice!!
10 char

WHOA!! Great work!!!
Can't wait to see custom roms on the atrix!

THanks, I can't wait to start editing init.rc =)

whoa awesome news
this is another reason we have to allow Junior Members to post

Amazing work! Been waiting for this for a long time.
Enviado desde mi MB860 usando XDA Premium App

Kudos my man!

Awesome job!
Sent from my MB860 using XDA App

you are the man!! thx!!! i cant wait to see customs rooms working in atrix!

AWESOME
I'm curious to know, how does this work differ, if at all, from the work tenfar was doing?

Awesome! Cant wait for CM7!
Going to hold off installing this until some roms start showing up. Not that I dont trust this, but it couldn't hurt to wait until there's something to use with it.

[HowTo] ClockWorkMod Recovery

Thanks to Trekfan422991 for cluing me in on the Optimus 3D recovery.
Working:
Nandroid
ADB (after special driver install, need to tweak recovery for it to work with normal drivers)
Mounting USB to computer
Flashing zip files
Dangerous:
Fix Permissions (caused lots of crazy issues, fix by wiping data if you use it)
Sdparted (the sdcards are mount incorrectly, this will probably destroy your device)
I am in the process of making a recovery specifically for our device, it is mostly done and will be posted here when it is ready!
What you are going to need:
ADB (and know how to use it, don't ask in here)
Rooted Phone (again, that will not be covered, don't ask in here)
Optimus 3D recovery image [Download]
If you don't understand something in that list, DO A SEARCH AND LEARN, don't clutter the thread with crap!
Lets get started!
Lets start by getting the recovery.img file on the phone. Open up a cmd prompt and type:
Code:
adb push recovery.img /data
The rest of this will be done on the phone shell. In the cmd prompt type:
Code:
adb shell
We will need to have su access, In the cmd prompt type:
(If you haven't allowed shell su in SuperUser now would be a good time to accept the root request on the phone.)
Code:
su
Now we are going to backup your current recovery to your sdcard. In the cmd prompt type:
(make sure your sdcard is not mounted to your computer)
Code:
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
After that is done we are going to flash ClockWorkMod Recovery! In the cmd prompt type:
Code:
dd if=/data/recovery.img of=/dev/block/mmcblk0p6 bs=4096
Congrats! You now have ClockWorkMod Recovery! In the cmd prompt type:
(each line is single command)
Code:
rm /data/recovery.img
reboot
How to enable ADB access: (only if it's not working already)
Download and install: (unzip and install the 2 exe files)
http://www.mediafire.com/?j5m1plnvzb8r0zc
While booted into ClockWorkMod Recovery, go into your device manager, you should see an "LGE Android Composite Device" with a yellow triangle on it.
right click on it, update driver software...
select browse my computer for driver software
select let me pick from a list of device drivers on my computer
click the "Have Disk" button
click the "browse" button
browse to;
for 64bit:
C:\Program Files (x86)\LG Electronics\LG Android Driver\64BitADB
for 32bit:
C:\Program Files\LG Electronics\LG Android Driver
and select lgandadb.inf
click "ok"
From that list select "Android Sooner Single ADB Interface"
click "next"
click "yes" on the popup
Click to expand...
Click to collapse

Awesome Great Work. Did you figure out the Bootloader? Or is there even one should more be the question I suppose. Good thing I am having issues with permissions with this didn't notice the SD Card Mounting issue till just now. That I can't deal with atm.

malickie said:
Awesome Great Work. Did you figure out the Bootloader? Or is there even one should more be the question I suppose.
Click to expand...
Click to collapse
I found a few modes, but no drivers yet so I don't know what they are. Even if we break stuff the kernel and recovery are separate, so technically we should always be albe to get back into recovery to fix stuff.

thankyou DG for getting this started..
so now with my clockworkmod i just made a backup of stock rom... if i say change the framework and I get boot loop.. will this clockwork mod be able to restore the original rom without any problems???

tiny problem... might just be missing something... but after i made my backup and i choose reboot system now... it just goes back to recovery... how do i boot up my phone!!!
sorry if it is obvious... im super tired...

Trekfan422991 said:
tiny problem... might just be missing something... but after i made my backup and i choose reboot system now... it just goes back to recovery... how do i boot up my phone!!!
sorry if it is obvious... im super tired...
Click to expand...
Click to collapse
I got mixed up as to what partition to flash, you just flashed a recovery image over the kernel... its ok tho.
follow my instructions to the su part, then do this.
// this will restore the kernel
dd if=/sdcard/mmcblk0p5.backup of=/dev/block/mmcblk0p5 bs=4096
// this will backup recovery
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.backup bs=4096
// this will flash cwm
dd if=/data/recovery.img of=/dev/block/mmcblk0p6 bs=4096
OP is fixed!
edit--
and you have no adb access, this is going to get interesting!

haha... i shoulda noticed
____

LET THIS BE A LESSON FOR ALL OF YOU!!!!
THIS IS WHY YOU ALWAYS ALWAYS MAKE BACKUPS!!!!!!
NEVER SKIP THE BACKUP STEP!!!! haha

Trekfan422991 said:
LET THIS BE A LESSON FOR ALL OF YOU!!!!
THIS IS WHY YOU ALWAYS ALWAYS MAKE BACKUPS!!!!!!
NEVER SKIP THE BACKUP STEP!!!! haha
Click to expand...
Click to collapse
LOL! For sure that is why I always say, " Save early, save often, save to multiple locations!" haha.

47r0n1n said:
LOL! For sure that is why I always say, " Save early, save often, save to multiple locations!" haha.
Click to expand...
Click to collapse
sorry just side note:
how you liking your thrill compared to the evo 3d???

designgears said:
What you are going to need:
ADB (and know how to use it, don't ask in here)
Rooted Phone (again, that will not be covered, don't ask in here)
Optimus 3D recovery image [Download]
Click to expand...
Click to collapse
Thanks so much to DG & Trekfan, I've been looking everywhere for CWM!
I cannot find the download link to the recovery - in the quote above from the OP, where it says download, is that supposed to be a download link? I don't know if there's a typo or if I'm just missing something, but the "download" word doesn't link to anything for me. Instead, I thought I'd try searching for it in the optimus 3d forums, but search is down too Does anyone have a link?

Komodo Rogue said:
Thanks so much to DG & Trekfan, I've been looking everywhere for CWM!
I cannot find the download link to the recovery - in the quote above from the OP, where it says download, is that supposed to be a download link? I don't know if there's a typo or if I'm just missing something, but the "download" word doesn't link to anything for me. Instead, I thought I'd try searching for it in the optimus 3d forums, but search is down too Does anyone have a link?
Click to expand...
Click to collapse
I took it down for now, working on some issues.

Woohoo, got Trekfan422991 all fixed!

its true... i tested out my framework mod and it works great!!! look sway better then stock!!!

designgears said:
I took it down for now, working on some issues.
Click to expand...
Click to collapse
Ah, gotcha. I thought I was going crazy Thanks!

Let's rom this baby dg . I assume you also bought this with plans to possibly exchange it when the AT&T Galaxy S II comes out? I'm very impressed by the performance and build quality so far. The main thing it needs is a better theme... yikes!

designgears said:
Dangerous:
Fix Permissions (caused lots of crazy issues, fix by wiping data if you use it)
Sdparted (the sdcards are mount incorrectly, this will probably destroy your device)
Click to expand...
Click to collapse
After CWM is installed and working on our device, would it be safe to fix permission in "ROM Manager," or does that just fix permissions through whichever recovery is currently installed?
I'm guessing someone here knows how ROM manager works in this regard, but if not, I'd be happy to be a guinea pig... after all, I can make/restore backups now! : )
gtg465x said:
Let's rom this baby dg . I assume you also bought this with plans to possibly exchange it when the AT&T Galaxy S II comes out? I'm very impressed by the performance and build quality so far. The main thing it needs is a better theme... yikes!
Click to expand...
Click to collapse
Sorry for being OT but I must agree: if designgears made a Thrill ROM that's Cognition-esque then I'd consider keeping my Thrill, but considering he already has a ROM for the GSII, I imagine he's going to get the AT&T Galaxy S II? Side note, you know you've really earned some serious nerd-cred when other nerds (who you don't even know) speculate what your next cell is going to be

Komodo Rogue said:
Sorry for being OT but I must agree: if designgears made a Thrill ROM that's Cognition-esque then I'd consider keeping my Thrill, but considering he already has a ROM for the GSII, I imagine he's going to get the AT&T Galaxy S II? Side note, you know you've really earned some serious nerd-cred when other nerds (who you don't even know) speculate what your next cell is going to be
Click to expand...
Click to collapse
Not waiting on dg here. Think you missed the "let's" part. Working on a Thrill ROM as we speak. Just got the Thrill about an hour ago and I already dumped the system image, de-odexed it, created an updater-script, added root and busybox, removed bloat, and updated a few apps. Time to start theming, modding framework, and tweaking.

Im also working on a ROM but if we cannot flash zips with CWM then how am I supposed to flash the ROM? Are you going to flash it with Heimdall or something?

gtg465x said:
Not waiting on dg here. Think you missed the "let's" part. Working on a Thrill ROM as we speak. Just got the Thrill about an hour ago and I already dumped the system image, de-odexed it, created an updater-script, added root and busybox, removed bloat, and updated a few apps. Time to start theming, modding framework, and tweaking.
Click to expand...
Click to collapse
Oh, good to hear! Man I really have to sit down and try to learn some more technical stuff sometime, because ROM creation, and not even just the theming aspects, is so appealing to me.
Maybe you can create a thread placeholder and describe what you've done so far? We're really getting OT, sorry all.
timbrendelaz said:
Im also working on a ROM but if we cannot flash zips with CWM then how am I supposed to flash the ROM? Are you going to flash it with Heimdall or something?
Click to expand...
Click to collapse
Oh, I thought you could flash zips through adb after doing the fix? Or no? (((edit: wait, no, I was thinking about pushing .apks through ADB, not flashing .zip files))) Hopefully this is something DG's new recovery might address. If no to both, could you distribute ROMs via nandroid backup files of a fresh ROM installation? It would be incredibly inefficient, but it would work, right?