[ Boot Animation ] - IBM's Centennial and Smarter Planet - Android Themes

In the spirit of IBM's centennial celebration I have created some boot animation for your android devices to fit this occasion and set the mood right. Download, install to your Android device and have fun.
Install Instructions
All devices (ADB method) :
Enable USB debugging on device in Settings > Applications > Development
Connect your device to the computer via USB
Launch Terminal
Make backup dir - mkdir ~/backup-bootanimation
Pull the existing file if any using - adb pull /data/local/bootanimation.zip ~/backup-bootanimation
Push the new file to the device using - adb push bootanimation.zip /data/local/
Disconnect USB Connection
Reboot the device to see the changes
Rooted Devices
If the device is rooted we can use Root Explorer or any other file manager to copy the bootanimation.zip file to /data/local
For this
Connect the device to the computer via USB
Enable USB Storage mode by selecting "Select to copy files to/from your computer" from Nofification bar
Copy the file from computer to SDCard
Unmount the device from computer
Turnoff USB Storage in device
Use Root Explorer to copy bootanimation.zip from /sdcard to /data/local
Set the permission as 755
Reboot the device to see the changes
Note : The bootanimation.zip file can also be copied to /system/media, in that case it is not deleted
even after a factory reset. But this requires a rooted device.
Troubleshooting
For some HTC devices the file has to be copied to - /system/customize/resource/. Try this if you are using a HTC device and the above method has not worked for you.
All the images are made with the open source Gimp package.
Write you comments and suggestions.
If you want to know more on creating boot animation I can help you with all the steps that you can follow to create your own boot animation for your device.

Hm.. I have never changed boot animation on my HTC Desire.
I'll try to do it.

Problem to download the file
tutysara said:
In the spirit of IBM's centennial celebration I have created some boot animation for your android devices to fit this occasion and set the mood right. Download, install to your Android device and have fun.
Install Instructions
All devices (ADB method) :
Enable USB debugging on device in Settings > Applications > Development
Connect your device to the computer via USB
Launch Terminal
Make backup dir - mkdir ~/backup-bootanimation
Pull the existing file if any using - adb pull /data/local/bootanimation.zip ~/backup-bootanimation
Push the new file to the device using - adb push bootanimation.zip /data/local/
Disconnect USB Connection
Reboot the device to see the changes
Rooted Devices
If the device is rooted we can use Root Explorer or any other file manager to copy the bootanimation.zip file to /data/local
For this
Connect the device to the computer via USB
Enable USB Storage mode by selecting "Select to copy files to/from your computer" from Nofification bar
Copy the file from computer to SDCard
Unmount the device from computer
Turnoff USB Storage in device
Use Root Explorer to copy bootanimation.zip from /sdcard to /data/local
Set the permission as 755
Reboot the device to see the changes
Note : The bootanimation.zip file can also be copied to /system/media, in that case it is not deleted
even after a factory reset. But this requires a rooted device.
Troubleshooting
For some HTC devices the file has to be copied to - /system/customize/resource/. Try this if you are using a HTC device and the above method has not worked for you.
All the images are made with the open source Gimp package.
Write you comments and suggestions.
If you want to know more on creating boot animation I can help you with all the steps that you can follow to create your own boot animation for your device.
Click to expand...
Click to collapse
I'm new in the forum, but I didn't find where I can do the download of the animations...

Links Please, can't find it on thread

Where is the link?

Related

[GUIDE] ADB, Fastboot, and Nandroid for Noobs

Hello All!
After much frustration with setting up ADB i finally got it working. Everyone said its simple and takes minimal knowledge but when things dont work, nothing really worked. Anyways after 2 hours of research trying to get ADB to work i finally got it all working and wanted to share my knowledge to anyone else that needed help.
This Guide is for windows only. If you are using Mac OS X please go here: ADB For Dummies
If you are using Linux please go here: [HOW-TO]Set up Android SDK/ADB/Fastboot on Ubuntu Linux
Like My Guide(s)? Donate
--------------------------------------------------------------------------
Things you need:
Android SDK - Download
Winrar - Download (32bit) Download (64bit)
Windows PC
USB Cable
A Rooted HTC Dream (Google G1)
--------------------------------------------------------------------------
Setting up the Android SDK
Download the file from above
Unzip to your desktop
Take the "android-sdk-windows" folder and move it to the root of your hard drive (C:\)
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-windows\platform-tools
Now,
1. Run SDK Manager.exe located in the android-sdk-windows folder
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install
If you cant get the setup to work, Download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
--------------------------------------------------------------------------
Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
--------------------------------------------------------------------------
Installing Drivers
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
For Android SDK 1.5r7+
1. Run SDK Manager.exe
2. If it gives you an error go to settings and click on "Force http//....."
3. Select all options and let it download and install
If you cant get the setup to work, Download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
--------------------------------------------------------------------------
Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in
Code:
cd C:\android-sdk-windows\platform-tools === Press Enter
adb devices === You should see your device listed
adb shell === you should see # in the next line
Now you are all set to run adb commands
Note: for a list of commands type in 'adb' in cmd
CONGRATS YOU NOW HAVE ADB FULLY RUNNING!
--------------------------------------------------------------------------
Droid Explorer by Camalot
Droid Explorer is a Windows software that will download, install, and setup the android SDK for you all in under a minute so you are ready to go. I use this on a daily basis. This amazing piece of software has tons of plugins and a built in file explorer for all your files on your phone! All you gotta do is download, install, and go!
Download Droid Explorer - Here
Install the program, and let it setup the SDK files for you
Connect your phone
Enjoy!
--------------------------------------------------------------------------
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Follow the steps above to install the drivers
--------------------------------------------------------------------------
When Typing just adb in cmd you will get whats called a "usage doc" which gives you a lits of commands that you can use:
Code:
-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s <serial number> - directs command to the USB device or emulator w
ith
the given serial number
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and instal
l it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb root - restarts adb with root permissions
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PDP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be u
pdated.
- If it is "system" or "data", only the corresponding partition
is updated.
--------------------------------------------------------------------------
Commands that you should know
adb push - Insert file to phone such as Stock.apk to /data/app_s
Code:
adb push <pathtofile.apk> <file system location> - Example: adb push c:\app.apk /data/app
adb pull - Remove file from phone such as Stock.apk from /data/app_s
Code:
adb pull <pathtofile.apk> <path where you want to save it>- Example: adb pull /data/app/Stock.apk C:\
adb install - Install app to phone
Code:
adb install <path to file> - Example: adb install c:/apps/apps2sd.apk
adb uninstall - Uninstall app from phone
Code:
adb uninstall <name of application> - Example: adb uninstall linda.apk
For more ADB Commands go - Here
--------------------------------------------------------------------------
Thats it for ADB! Congrats and if you have any questions please ask me or if anything is missing or not correct please tell me. I got all of this from research and personal experience.
[GUIDE] Fastboot for Noobs
Fastboot
Like My Guide(s)? Donate
Things you need:
New SPL - Download
New Radio - Download
Your Current ROM - CyanogenMod 3.6
SD Card Reader
Rooted G1 Phone
Computer
USB Cable
Patience
---------------------------------------------------------------------------------------
Install Radio FIRST
Download the Radio Update
Rename it to update.zip
Remove your SD Card from your phone and place it in your SD Card Reader
Put the update.zip at the root of your SDcard (root = not in any folder)
Insert your sdcard back into the phone
Turn off your phone (Hold power and press Power Off)
Hold the Home button and then press the power button (Keep holding power)
You will now enter recovery
Open up your keyboard and press Alt-S
Let it finish the update
When done reboot by pressing Home and Back
You should be able to access your Home screen (If its stuck on the Google G1 screen dont panic, just remove your battery for now)
---------------------------------------------------------------------------------------
Installing the new SPL
Note: To update you must have a PVT board. To Check go into fastboot (Power and Camera and check)
Take your SD Card out again and plug it into the pc
Remove the update.zip that you put in there
Download your current Rom or any other ROM that you want. I suggest CyanogenMod 3.6
Download the SPL Update
Rename the SPL Update to update.zip
Remove your SD Card from your phone and place it in your SD Card Reader
Put the update.zip at the root of your SDcard (root = not in any folder)
Insert your sdcard back into the phone
Turn off your phone (Hold power and press Power Off) or put your battery back in and turn it on
Hold the Home button and then press the power button (Keep holding power)
You will now enter recovery
Open up your keyboard and press Alt-S
Let it finish the update
Now it will reboot on its own back to recovery
Reboot again by pressing Home + Back
Your phone will be stuck on the T-Mobile G1 Screen (Again DONT FREAK)
Remove the battery from your phone
Remove your SD Card and plug it back into your computer
Take the ROM that you downloaded and rename it update.zip
Remove the update.zip that was on your SD Card and put this new one it
Put the battery back into your phone
Enter recovery (Home + Power)
Press Alt+s to update
Let it finish
Press Home + Back to reboot
Thats it! You now have your new SPL and Radio
---------------------------------------------------------------------------------------
Getting into Fastboot
Turn off your phone
Hold the back button and keep holding it while turning your phone back on
You should see 3 Android guys on skateboards
You should now be in Fastboot mode!
---------------------------------------------------------------------------------------
Setting up fastboot to work with your computer
Plug your phone in to your computer through USB
You should get a popup that your computer found the ADB Device for fastboot
When it asks you for drivers, make sure u select the option to locate the drivers from your computer yourself
Since you already have your Android 1.5r2 SDK installed, the drivers are in the same place where the ADB drivers are
C:\android-sdk-windows-1.5_r2\usb_driver
Make sure you choose the correct folder depending on your OS
Press ok to install the drivers
Fastboot should now be up and running
---------------------------------------------------------------------------------------
Make sure Fastboot is working
Open up Command Prompt
type the following
Code:
cd C:\android-sdk-windows-1.5_r2\tools === Press Enter
fastboot devices === Press enter, your device should be listed
fastboot shell === You should see a # in the next line
type fastboot and press enter for general commands
---------------------------------------------------------------------------------------
When Typing just fastboot in cmd you will get whats called a "usage doc" which gives you a lits of commands that you can use:
Code:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall 'flash boot' + 'flash system'
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
For more fastboot Commands go - Here
---------------------------------------------------------------------------------------
Congrats! You now have Fastboot and ADB up and running!!!
----------------------------------------------------------------------------
Disclamer: I am not liable to any damage that happens to your phone. This is just a guide which you have chosen to follow, so please do not blame me for any damaged phones or bricks.
Nandroid Backup and Restore
Whats is a Nandroid Backup?
Like My Guide(s)? Donate
Nandroid Backup is a tool allowing all rooted g1 users to create a full system backup and restore which, when flashing and testing different roms can be very useful.
----------------------------------------------------------------------------
What You Will Need
A Rooted G1 phone, I suggest with the latest SPL (Guide above to install latest Radio and SPL)
Cyanogen's Pimped Out Recovery Image 1.4 - Download (IMG)
An SD Card with 100mb of free space
A Computer
SD Card reader or USB Cable
----------------------------------------------------------------------------
Installing the New Recovery Image
Download the recovery image from above, you will want the Download (IMG) download
Place the cm-recovery-1.4.img file in the root of your SD Card (Root = not in any folder)
Go back to your phone (Dont forget to unmount)
Open terminal and type in the following
Code:
su (wait for a screen to popup and press "allow")
flash_image recovery /sdcard/cm-recovery-1.4.img
If you have problems with a "no space on device" error, try using fastboot and erasing first:
Code:
fastboot erase recovery
fastboot flash recovery cm-recovery-1.4.img
----------------------------------------------------------------------------
Creating a Backup using Nandroid 2.1
Boot up your phone in recovery (Turn off, then turn on while holding Home button)
You will now see your new Cyanogen 1.3.1 + JF recovery screen (YAY!!! )
Scroll down to "nandroid v2.1 backup" and press on it to create your Backup
Let it work, it should take a minute or so
Once its done, your backup is complete and is saved on your sdcard in the "nandroid" folder
Recovering to Your Nandroid Backup
Option 1 (Without a Computer)
Note: This recovery will only recover your latest nandroid backup (the one with the newest timestamp)
Make sure u made a backup and its in the nandroid folder on your sdcard
Boot up your phone in recovery (Turn off, then turn on while holding Home button)
Scroll down to "restore latest backup" and press on it
Let it work
Once its done reboot your phone and you backup will now be restored!
Option 2 (With a computer)
Note: With this option, you can use any nandroid backup that you have made, not just the latest one
1) First go in to your tools folder where you put your SDK 1.5r2 (C:\android-sdk-windows-1.5_r2\tools as reference)
2) Take the files adb.exe fastboot.exe and AdbWinApi.dll (found here - http://sharebee.com/16a06ebb) and place them in C:\WINDOWS\system32
3) Download the Nandroid Backup and Restore GUI made by Markazeh - Here
Extract the folder to your desktop or where ever you can easily find it (I put mine in the SDK folder for easy access)
4) You will need 4 files: Boot.img, System.img , Data.img, and Recovery.img
Place those 4 files in the same folder as the Nandroid Recovery GUI folder you just extracted in step 3
5) Boot your phone into fastboot mode (Turn off the G1 and turn on while holding the BACK button. If you have an older SPL then hold the CAMERA button and press POWER)
6) Once in fastboot (you should see a white screen with three androids on skateboards) plug your phone to your computer via USB. You might have to press the BACK key to turn it into FASTBOOT mode, or follow the on screen prompts.
NOTE: If you dont have the drivers installed please look one post above to setup fastboot
7) Open NANDROID_Recovery_GUI.exe, everything on the left hand side should be "found!"
8) Choose an option from the right to Restore All, Restore all except Recovery, or Restore Data Only. Let the program do its thing.
Once its done you can reboot and all your info from your backup should be restored!
----------------------------------------------------------------------------
Congrats! You now Backed up your phone and will/have restored it!
----------------------------------------------------------------------------
Disclamer: I am not liable to any damage that happens to your phone. This is just a guide which you have chosen to follow, so please do not blame me for any damaged phones or bricks.
Credit:
Haykuro
Cyanogen
JacHero
NeoBlade
Markazeh
makethetick
XDA Community for your support and help
If i have forgot anyone, i am sorry, please tell me and i will add you
Excellent Guide bro. Although I have no need for it, still A++. Might want to include how to do a nandroid restore just a suggestion!
[EDIT]: I think this guide is worthy of a sticky! What do you guys think? ^^
You are the man!!!
Short simple and to the point!!!
0nly if all the guides were like this...
Thanks man!
not sure if this is the right spot or not but ever since I flashed from cy36 to 361 I keep losing my adb connection I have to g1s and while I'm working on one the other one isn't even connected to the computer so I just flashed the hero theme on one and plugged it in usb and tried to do the clock switcher didn't work so I go do a cmd and do an adb devices and there's nothing listed then I do an adb shell and it says error device not found but the computer sees it and the adb driver is loaded along with the mass storage driver and haven't had any problems until now.
PlatinumMOTO said:
not sure if this is the right spot or not but ever since I flashed from cy36 to 361 I keep losing my adb connection I have to g1s and while I'm working on one the other one isn't even connected to the computer so I just flashed the hero theme on one and plugged it in usb and tried to do the clock switcher didn't work so I go do a cmd and do an adb devices and there's nothing listed then I do an adb shell and it says error device not found but the computer sees it and the adb driver is loaded along with the mass storage driver and haven't had any problems until now.
Click to expand...
Click to collapse
You might want to try reinstalling the drivers and the USB Storage devices. That fixed it for me
Did you follow the "Preparing your phone for ADB" steps? and do ^ that suggestion first. lol
Mikey1022 said:
Did you follow the "Preparing your phone for ADB" steps? and do ^ that suggestion first. lol
Click to expand...
Click to collapse
yes I did I've had adb since sdk 1.0 and never had a problem like I said I actually have 1.0 and 1.5 on my computer so that when I root or re root other g1s I do adb but I noticed adb only works on it's version if I had a 1.5 g1 then the 1.0 won't work and same with the other way but that's not the problem I think I found it it's the clock switcher with 361 of Cyan because now I deleted it and restarted and it works just fine and I just tried to do the clock switcher and now it doesn't recognize either g1 again.
push apk via abd while in recovery mode?
Is it possible to use ADB to push apk files to the phone when the phone is in recovery mode? I tried and it didn't work (the files I was trying to replace weren't overwritten), and I'm wondering if it's because I did something wrong, or if it just doesn't work. I have adb working fine otherwise, have used it a bunch, including to push files while the phone was booted normally.
Specifically, I want to push the calendar.apk and calendarprovider.apk (I like the 1x4 calendar widget better than the 2x2). I want to do this in recovery mode so that the calendar isn't running when the file gets overwritten. I keep having calendar problems after pushing the 1x4 widget, and I think the problems are due to the calendar being active when the file gets replaced.
ADB Commands...
First I would like to say I think the guide is great. Though I don't have a lot of use for it, but I have some suggestions to make:
1. List some ADB commands and what they do, specifically how to use them, and what you would use them for. This forum has taught me so much about my phone and linux, but sometimes it was a slow learning process. Working the ADB push/pull feature was confusing when I first started using it.
2. Nandroid Back-ups. I still don't think I am using it correctly. I know there is a guide, but it still seems confusing. Maybe dumb it down a little.
3. Maybe more information on fastboot. I'm not sure exactly what it is or does, seems like just another version of recovery terminal, which from everything I have learned so far, if you can't get to your recovery terminal, you probably won't be able to get to your fastboot either.
ccunningham83 said:
Maybe more information on fastboot. I'm not sure exactly what it is or does, seems like just another version of recovery terminal, which from everything I have learned so far, if you can't get to your recovery terminal, you probably won't be able to get to your fastboot either.
Click to expand...
Click to collapse
Actually, you can access fastboot from the bootloader, so it's available even if the recovery console isn't.
heldc said:
Is it possible to use ADB to push apk files to the phone when the phone is in recovery mode? I tried and it didn't work (the files I was trying to replace weren't overwritten), and I'm wondering if it's because I did something wrong, or if it just doesn't work. I have adb working fine otherwise, have used it a bunch, including to push files while the phone was booted normally.
Specifically, I want to push the calendar.apk and calendarprovider.apk (I like the 1x4 calendar widget better than the 2x2). I want to do this in recovery mode so that the calendar isn't running when the file gets overwritten. I keep having calendar problems after pushing the 1x4 widget, and I think the problems are due to the calendar being active when the file gets replaced.
Click to expand...
Click to collapse
In recovery, nothing is mounted. So in order to push and overwrite the calender and calenderproviders, you have to do this in recovery/adb shell
mount /system/app
After that, You should be able to push the files + overwrite them =]. QQ why do you want to do this inrecovery and not when the phone is turned on and fully functional?o_o
but how many times is bootloader available when recovery console isn't? I understand they are different, but from everything I have seen, if you can get one, you can get the other and if you can't get one, you cant get the other either.
ccunningham83 said:
First I would like to say I think the guide is great. Though I don't have a lot of use for it, but I have some suggestions to make:
1. List some ADB commands and what they do, specifically how to use them, and what you would use them for. This forum has taught me so much about my phone and linux, but sometimes it was a slow learning process. Working the ADB push/pull feature was confusing when I first started using it.
2. Nandroid Back-ups. I still don't think I am using it correctly. I know there is a guide, but it still seems confusing. Maybe dumb it down a little.
3. Maybe more information on fastboot. I'm not sure exactly what it is or does, seems like just another version of recovery terminal, which from everything I have learned so far, if you can't get to your recovery terminal, you probably won't be able to get to your fastboot either.
Click to expand...
Click to collapse
If you type "adb" in terminal you get a whole list of the options and what they do Also what part of nandroid backup don't you understand? Its just booting into recovery and alt+b. I assume you mean nandroid restores right? Drop me a PM maybe I can help you
ccunningham83 said:
but how many times is bootloader available when recovery console isn't? I understand they are different, but from everything I have seen, if you can get one, you can get the other and if you can't get one, you cant get the other either.
Click to expand...
Click to collapse
Its because the boot loader is dependent on the SPL and if you flash the "Danger" SPL which is basically the only one that causes problems, then you have a chance of bricking your phone. In that case, brick = no bootloader no recovery
ccunningham83 said:
but how many times is bootloader available when recovery console isn't? I understand they are different, but from everything I have seen, if you can get one, you can get the other and if you can't get one, you cant get the other either.
Click to expand...
Click to collapse
Well, actually, I recently had just this happen. My fiance got a g1, and somehow in flashing it for him, it ended up without a working recovery console. It wouldn't flash the recovery image from within the OS, so I had to use fastboot to flash the recovery image. So, it's quite possible to have a bootloader and no recovery console.
alritewhadeva said:
In recovery, nothing is mounted. So in order to push and overwrite the calender and calenderproviders, you have to do this in recovery/adb shell
mount /system/app
After that, You should be able to push the files + overwrite them =]. QQ why do you want to do this inrecovery and not when the phone is turned on and fully functional?o_o
Click to expand...
Click to collapse
Ah ha, that's likely the problem, thanks!
Like I said, I want to overwrite a system app, the calendar. Every time I've done this with the phone "fully functional", the app ends up constantly force closing. I suspect this might be due to corruption from overwriting the app while it's running. I'm hoping that if I replace the app when the OS isn't on, the replacement app will work properly.
No problem You could also try replacing the calender app in a ROM and resigin it and then flash it. Have you tried rebooting after replacing the Calender app when the phone is I quote from myself " fully functional "?

Renaming a sys file in ADB

can you rename a system file in adb..I know how to do it with root file explorer but them apps are not working for me at the moment so if I can can someone give me the commands to do this..
Just type"adb", and it will list all the available commands...
Sent from my Nexus One using XDA App
They're linux commands. You 'move' the file from the old name to the new one. The command you use is
Code:
$mv filename.old filename.new
If it's a system file, you'll need superuser permission and you'll have to make the file system read-write.
http://www.tuxfiles.org/linuxhelp/fileman.html
make sure your phone has enabled USB debugging, connect it to your computer, on your computer type:
adb shell
then you're in your phone's shell, use the command mentioned in 3rd post to rename a file.

[Noob TUT]ADB - The Easy Way. 5 Seconds. Portable :)

I saw a lot of threads asking for instructions on how to use ADB to reboot into recovery, Push/Pull Files, etc, etc.
Just follow this guide to set up ADB in 5 seconds WITHOUT THE ANDROID SDK.
This ADB setup is less than one MB and no need to download the entire useless (for us, anyway) Android SDK.
1. Extract the Mini ADB archive attached below to any folder.
2. Just use the RunME.bat file to open a console directly in the ADB folder, so you can get started directly without the cd command!
To reboot into recovery:
Extract, Open RunMe.bat, type adb reboot recovery.
That easy.
Just make sure to have LG Phone Drivers installed beforehand.
Get Drivers here: Here
thanks mate ,, i never used adb when i get bootloops ,, i thought its complicated
rrgrrg said:
thanks mate ,, i never used adb when i get bootloops ,, i thought its complicated
Click to expand...
Click to collapse
Now you see how easy it is! Did you try it?
Its Super simple!
Does it work on any Android?
cm9 htc a310e
Yes.. It works when debugging is On.....
But how to get into recovery when we have bootloops or system force close
Type adb reboot recovery... it's in the op...
Sent from my LG-P970 using xda app-developers app
When you have bootloops:
Remove battery.
Re insert.
Connect phone to computer using USB.
Try to turn on phone, when bootanimation keeps looping,
run the runme.bat, type adb reboot recovery.
Done
And remember to press thanks
Sent from my LG-P970 using Tapatalk 2
thanks ykumar00 :good:

			
				
You can use adb also to install applications from your pc. I keep copies of my apks on windows machine - sending via usb and installing from phone is a tedious task (mounting usb, copying file, unmounting, waiting for sdcard scanning, navigating to apk file, installing). Just type:
adb install -r name.apk
USB debugging should be on.
I've created a batch and registry entry so I just make right click on apk and choose "install to sd" or "install to phone"
kretos said:
You can use adb also to install applications from your pc. I keep copies of my apks on windows machine - sending via usb and installing from phone is a tedious task (mounting usb, copying file, unmounting, waiting for sdcard scanning, navigating to apk file, installing). Just type:
adb install -r name.apk
USB debugging should be on.
I've created a batch and registry entry so I just make right click on apk and choose "install to sd" or "install to phone"
Click to expand...
Click to collapse
That's just one thing adb can do! Apart from reebooting normally and recovery, You can push/pull files to/from any folder, you can take logcats, and on ics, you can use adb to even take phone backups!
Also, could you share the bat and registry file? Looks interesting.
Sure, I'll post it here in the evening (in 4 hours)
Yup it would be really very useful and if someone has something to share related to adb please do so... it would be really very usefull for all ob users.
Sent from my LG-P970 using xda app-developers app
I could add it to the OP. With credits of course....
Ok, here you go:
the scripts assume that adb.exe is extracted to e:\MiniADB\
download attachments and remove .txt extension from them.
put scripts install.bat and install_tel.bat to e:\MiniADB and run (double click and confirm in Vista/W7/W8 to run as administrator) apk_install.reg.
After that you will get two options in context menu for apk files:
Install in phone
Install in SD card
First option will install application in phone's memory, second in sd card. If application is already installed, it will be overwritten.
If you wish to put MiniADB somewhere else you have to:
modify install.bat and install_tel.bat and replace e:\MiniADB\ with your path
modify apk_install.reg and replace e:\\MiniADB\\ with your path but remember to make all \ doubled \\
Example:
if you want to put MiniADB into c:\Android\MiniADB then replace e:\\MiniADB\\ with c:\\Android\\MiniADB\\ in a .reg file
Those scripts are for Windows only. I'm not sure if it works for Windows NT/9x as registry file format was changed as I remember.
Edit:
USB debugging must be on in a phone to adb work properly. Phone must be connected to computer
Sorry for delay
When trying adb, I am having this problem.
Sent from my LG-P970 using xda premium
vishaldhamnekar said:
When trying adb, I am having this problem.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
the command is "adb reboot recovery".
dcop7 said:
the command is "adb reboot recovery".
Click to expand...
Click to collapse
Ohhh sorry,my mistake. I didn't read it carefully.
And Thanks...

Broken Screen, Not Rooted, Lockscreened.

SOLVED
(No success for me personally, but I'd still like to explain how I realised there's no hope left - description is at the bottom of this post)
Hi, not a regular poster in the S3 mini section, but a friend of mine has had his entire screen smashed. Somehow though, the phone is still breathing and can be turned on/off.
The problem is: My friend has asked me to extract his photos and similar media from the device's memory.
The device isn't rooted and I'm not sure if there's a default recovery mode or something like that built in the device.
I've tried connecting the device to my PC and it gets recognized and the drivers install themselves, but the device is empty. Moreover, I've downloaded KIES which also recognized the device, but says that there's a lockscreen and he can't go any further.
Any advices? Most of the other xda answers are for rooted phones so they haven't been very helpful, unfortunately.
There's a picture of the device in the attachments below, and KIES interface aswell.
<<EDIT>>
I'm using this http://forum.xda-developers.com/showthread.php?t=2339530 Recovery operation but it keeps saying "adb.exe" not found. I've installed ADB via the 15sec install ( http://forum.xda-developers.com/showthread.php?t=2588979 ) and entered the path correctly, but it still can't detect it. Any tips? perhaps i'm using the wrong ADB - I don't have c:\android\platform-tools folder - it's simply c:\adb\adb.exe.
SOLVED PROBLEM:
After messing with this for 2-3 days, I've decided to go with the simplest method - find a way to list all directories on the device and then see if there's anything in "sdcard" or a similar folder. To do this, after ADB recognizes your device, type : adb shell ls -R
adb shell ls -R will list a zillion directories so you may want to save the data into a .txt file. to do this, type adb shell ls -R > output.txt (or any other name).
After that, open the output.txt file and then use ctrl-f to find the sdcard folders and check if there's any data left in them.
IMPORTANT:
I've read that, without root permission, one cannot access the data or sdcard directories. The device I was working on had USB debugging OFF so there was no way I could root the phone in order to access the data directories.
Silly question, but did you use option 2 in RecoverData to change the path of ADB to c:\adb\?
aumedina said:
Silly question, but did you use option 2 in RecoverData to change the path of ADB to c:\adb\?
Click to expand...
Click to collapse
Yup, but it still can't find it. That's why I think the ADB-15sec install might be flawed.
There's a screencap of the Recovery + TotalCMD in the background in the attachments.
<EDIT>
Alright so I've followed an ADB tutorial (http://forum.xda-developers.com/showthread.php?t=2266638), installed all the SDK packages just to be sure.
ADB now recognizes the device after I've booted it into recovery mode. I've tried doing adb pull /data and it says 0 files pulled, 0 files skipped. Does this mean the device's internal memory is blank? No it doesn't, only the folder "data" is blank, other system data is present.
<EDIT 2> Can anyone please tell me the path to the internal camera storage folder? I may have fixed the problem if only I knew the correct path. SOLVED: The correct path is one of 4 combinations, usually these: /mnt/sdcard0/ /mnt/sdcard/ /storage/sdcard0/ /storage/sdcard/

ANY apk or file that can bind folders?

As ive written in my past posts, using exagear (windows emulator based on wine), before I try to give that one su and read external sd and make final attempts to read more than 1 folder... im trying to bind folders. from terminal on phone. I did it with ADB and usb connected to PC with bindfs, I make a bind between Download\ and folder on external SD card, it is read by Exagear as it sees the External folder instead of the actual Download folder. But the moment I disconnect from PC or disable ADB debugging, the bind is lost, Download folder even disappears, have to reboot to restore folder.
Im using Magisk to give any such app su. So I give SU to terminal emulator apk and when I perform the same bindfs command it binds the 2 folders but only in the terminal. If I browse the folders with file explorer I won't see the External SD folder when going to Download'\ and neither will the exagear (unlike when done from ADB). So I need to bind them when away from PC, so I can 'see'the external sd
Tried FolderMount apk, few others, commands, which one works to properly bind as can be seen in all apps or particular? My final stop will be to try reverse engineer and see if su will allow exagear to see more than 1 folder (it only sees Download folder)
FBind Magisk module: (read last pages)
https://forum.xda-developers.com/apps/magisk/module-magic-folder-binder-t3621814
Rclone Mount Magisk module (on repository). Check the use of rclone with local storage.
Also the apps Apps2sd (by Vicky Bonick, see thread on XDA), Folder Mount, Luc* Pat* (ignore the piracy side of it, it has some nice other features) and maybe others can bind folders (may not work fine on some Android versions).
Ok I try fbind module, how do I use it? i installed the module in Magisk 20.4 and now i need the correct syntax. I tried
PHP:
fbind <external sd path> storage/emulated/0/download>
andit throws me into the menu
1) non_media_to_external 5) documentation
2) media_to_external 6) all_commands
3) obb_to_external 7) exit_wizard
4) troubleshooting 8) boot_log
--> OPTION <enter>:
Which one to do what I want /mnt/media_rw/MD6H-KDY5/My\ Folder /mnt/runtime/write/emulated/0/download
where the first folder is a folder on external sd that has to be mounted as download folder
ALSO I cant remove something, I created mnt/runtime/read/emulated/0/mnt/media_rw/MD6H-KDY5/My Folder and mnt/runtime/read/emulated/0/mnt/runtime/write/emulated/0/download
(oops partially solved this as explained here by enabling core only module in Magisk manager, reboot phone then they can be deleted). But then they are back if i allow fbind modules.. Final solution was to put (overwrite) some empty config.txt in data/adb/fbind and then I can delete the folders, it seems to read it from there. So no need to switch to Core only in magisk or uninstall the fbind.
It is why I need to do this correctly to not make a mess
OK did it with bindfs as I explain in other thread and important to do is in Magisk Settings in Mount Namespace Mode set it to Global, then use ScanMediaPlz apk or without it, reboot phone and retry again command in Terminal and see if external SD content will be on the Download folder

Categories

Resources