Related
How are the silicone cases suchs as these http://shop.ebay.com/?_from=R40&_trksid=m38.l1313&_nkw=xperia+silicone&_sacat=See-All-Categories
from Ebay?
I have never seen one in real life. Is the phone harder to operate with the case? Does it bulk up the phone too much?
I used to own a HTC tytnII (without a silicone case) which is slightly bulkier than the Xperia, and so if I could handle the HTC's slight bulk, then I would assume the Xperia w/ silicone case would be of similar size, no?
I wouldn't get a silicone case, they are very responsive to touch and uncomfortable.
I mean responsive as in they always get in the way, and you know how silicone is, it flexes and it bends.
They also feel uncomfortable for me.
This is about silicone cases for all phones and mp3 players.
I'd rather let me Xperia scratch than to be protected by that obstacle.
i would have agreed to u ..but the battery cover of my X1 got little scratches from coins in the pocket and now i am worried.
maybe leather covers?
those silicone cases do their job for a cheap price, I've used a few of them on a few makes of phones & they've been fine, but idd regards they feel a bit weird at 1st as in their like a condom but once u get used to them their ok I'd say.
Or you can indeed go buy a leather case & they vary from cheap .HK 1's to proporta etc... again I've had a few, even used expensive 1's.
I'm currently using a silicone case now & then with my diamond but mostly I have it in a leather flip style case, also got 2 leather pouch style cases...
My advice to any 1 who buys an expensive pda/ phone is to protect it 1 way or another with either a case or a pouch oh & always fit a screen protector also
Or don't care & get your pda scratched or chipped etc...
I had similiar one when I owned Touch Pro.
the fitment is ok (not the best) but I think the quality is at best average.
I just bought this one on ebay http://cgi.ebay.com/Black-Silicone-...photoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Since I like silicone cases better than regular leather or pouch ones.
Silicone Cases are Great
I've been using silicone cases for years. They do not bulk up the phone, and they give great protection. All the ports are available, and the buttons usable. And, they're inexpensive!
is the optical pad covered using the silicone case?
c_legaspi said:
is the optical pad covered using the silicone case?
Click to expand...
Click to collapse
Yes, they block the pad, at least the ones off of eBay do (I just recieved one)
There are some rubber cases that leave that area uncovered. You can find them on eBay as well. Although I don't now how the keyboard slide function works out with those.
the ones from hong kong off ebay are not very good, I have stopped using mine, so anyone thinking of buying one just avoid them.... I can post some pics if you want....
Clear Plastic Instead of Silicone
You might want to try a clear plastic case. I bought a couple from Ebay and like them better than the silicone ones. The ones I bought were about $3.25 each. Since they're clear, the allow the beauty of the phone show through. Plus, none of the buttons are covered.
As I use my HD2 with a gel case, I can't use a normal leather case which are to tight to fit my HD2. I found on ebay a seller who will make a custom case with the dimensions of my HD2 with gel case. Besides the dimensions of your phone you can customize your case in different ways, even with your own words engraved.
I didn't have to pay more then the normal price for a leather case for a HD2.
I think this could be very useful info for everyone who has a gel skin on his HD2. Ordered mine today and will give feedback when my case arrives.
http://stores.benl.ebay.be/EASECASE?_rdc=1
I ordered this case and wasn't impressed. First one wasn't done with the right cutouts so they sent a second one. The belt clip on the second one wasn't tight around my belt and just kept falling off. Pretty much just gathering dust in my desk now.
herlek said:
As I use my HD2 with a gel case, I can't use a normal leather case which are to tight to fit my HD2. I found on ebay a seller who will make a custom case with the dimensions of my HD2 with gel case. Besides the dimensions of your phone you can customize your case in different ways, even with your own words engraved.
I didn't have to pay more then the normal price for a leather case for a HD2.
I think this could be very useful info for everyone who has a gel skin on his HD2. Ordered mine today and will give feedback when my case arrives.
http://stores.benl.ebay.be/EASECASE?_rdc=1
Click to expand...
Click to collapse
Just received my leather case today. It's well made and a perfect fit. I've chosen the wider belt clip, it is holding tight on my belt, so no problems concerning the problems mentioned above. I think this leather case will not gathering dust in my desk.
This seller is also the only place so far as I know that makes custom leather cases from given dimensions.
Hello Friends,
found very interesting Video about 10 case for Galaxy Tab
Case-Mate Venture Case
Case-Mate Barely There
Scosche Foldio
Case Crown Canvas Stand
Samsung Snap on Leather Back
Samsung Protective Leather Easel
PDair Leather Book Case
Case Crown Neoprene Sleeve
Msytery Case
SGP Neo Stand
http://www.youtube.com/watch?v=UajAK0gWso4
Belkin Folio Stand
http://www.youtube.com/watch?v=6C2rM9jI4Ys
Monaco Executive Leather Case
http://www.youtube.com/watch?v=O9iDGdrvTKo
Yoobao Leather Book Style Case
http://www.youtube.com/watch?v=AJR_y6Pm8UI
Tpu Case Perfect Fit
http://www.youtube.com/watch?v=86QkjodcF4c
Flexi Skins
http://www.youtube.com/watch?v=E47sOPVPkgI
Samsung Galaxy Tab Case + Bag
http://www.youtube.com/watch?v=HNkBqxatJzA
another Samsung Galaxy Tab case roundup
http://www.youtube.com/watch?v=Qvd9iiJBZaU
but I do not know what should I buy
I've got the scosche foldio & really like it because it hardly adds any bulk to the tab.
Hi,
I would advice you to at least buy 2 case.
1. Foldable leather case with at least 2 landscape standing position groove
This one for premium feel & function outing.
2. Left, right & back protected transparent hard plastic case
This one for light & casual outing.
I'd also recommend the Zenus case, which isn't on the list. I got mine last month, and am pretty pleased with it. It's leather and adds some thickness, but it still fits in my coat pocket, but not most of my jeans' back pockets. I may break down and get a lighter one late Spring, or might just carry it around naked.
BuglessFan said:
I'd also recommend the Zenus case, which isn't on the list. I got mine last month, and am pretty pleased with it. It's leather and adds some thickness, but it still fits in my coat pocket, but not most of my jeans' back pockets. I may break down and get a lighter one late Spring, or might just carry it around naked.
Click to expand...
Click to collapse
+1
The Zenus is a very well made case, it looks classy and isn't bulky, doesn't cover any of the screen and the stand on it is solid and works well. I'm very pleased with the purchase, unlike the stock Samsung case which is quite poorly designed.
Yeah, after some weeks searching,
i found my favorit
http://www.ioomobile.com/shopbybrand/744-sgp-samsung-galaxy-tab-leather-case-argos-series-black.html
hm... expensive
Melkco Leather Case
I'm also looking for a tab case - great post with the video links. Since I'm new to the forum I can't post links, but google:
Melkco leather case galaxy tab
and it comes right up.
Retails at $69 USD. Pricey, but looks great.
otterbox case after a few drops i still love it.
I absolutely loathe cases where you have to slide the Phone/Tab into.
Not only are they difficult to put in and remove the device but they obstruct part of the screen and when you are swiping the leather edges can get in the way.
I much prefer the type that allows you to 'clip the Tab into place.
This method is easy to insert/remove and does not restrict the screen in any form.
Noreve do one (see here fore link) ~ This one has the added advantage of additional pockets for cards, notes, etc. and can be used as a stand to hold the Tab in Landscape.
Plus you can design the case to your own liking.
However, it's missing one vital ingredient for me and that is I would like to be able to remove the leather part that covers the screen.
I've seen cases where the case comes apart allowing you to remove the top screen cover which in turn makes it easier to hold and use the Tab when standing and if you put it down and want the screen on but not in it's stand you don't have a top cover flap hanging off at the side.
So... anyone seen a case similar to the Noreve but has a detachable screen cover?
Beards said:
So... anyone seen a case similar to the Noreve but has a detachable screen cover?
Click to expand...
Click to collapse
found a solution for ipad:
http://store.micgadget.com/ipad-fau...n-1-detachable-ipad-leather-case-w-stand.html
vanvancool said:
found a solution for ipad:
http://store.micgadget.com/ipad-fau...n-1-detachable-ipad-leather-case-w-stand.html
Click to expand...
Click to collapse
It's an interesting design and as always the Apple brand gets the 'prettiest' of designs.
Not sure about that release mechanism though.... I'd rather have the top cover come completely off thus ensuring the sides and back are still protected.
Scosche Foldio is the best, no added bulk, easy to put in jacket pocket, even in a the back pocket of my jeans, easy to take out and show off if needed and makes an awesome stand.
I really like the Samsung Slide Release Sleeve. It protects the tab well but lets you get it out easily to use it. The Tab is a sexy device, no sense having it hidden away all the time!
I also have the "d30" leather travel case (from Carphone Warehouse) which is really nice for travelling (makes a good stand) but unfortunately it partially covers the soft buttons which can make it a pain to use.
I just received my ' Case Mate - Barely There '.
It is exactly what i was looking for. Not scared to place it on the table or sunroom floor anymore in case of scratching the back. I think the tab looks excellent in its all new black look
Now hopefully it will fit in the Brodit holder for my van
aha! TY for these links! helped me decide on 2 cases.
So I've ordered and received the following 2 cases for my M8 so far:
SUPCASE Unicorn Beetle Premium Hybrid Protective
Aduro Shell Holster Combo Case
I'm not completely happy/unhappy with either one, so I've gone ahead and ordered the following cases:
Minisuit Clipster Kickstand Case - This one looks identical to the Arduro case but is $3 cheaper. If I decide to keep it, even after I ship back it will be the cheaper option.
HTC M8 One 2 Puregear Kickstand Case Holster Combo - This one looks very similar to the Arduro/Minisuit, but I'm hoping the shell covers a bit more and/or the holster might be good with one of the other covers.
Seidio Surface Case with Metal Kickstand and Holster Combo
Otterbox Defender Series
Spigen Capsule Clear
i-Blason Prime Series Dual Layer Holster Cover with Kickstand and Locking Belt Swivel Clip
SUPCASE Premium Hybrid Protective Bumper Case
I'm not planning on writing complete reviews because it would be too time consuming, but I would be happy to answer any questions that anyone has.
I have preferred SEIDIO cases in the past with the holster combo. I had those on my HTC Tilt and my first Droid 2 - which was lost at an airport when I think a piece of luggage pulled the whole thing from my belt when I lifted it. Apart from that experience (which I blame myself for as much as anything), I'd been happy with SEIDIO...the Tilt survived a motorcycle accident that totaled my bike, but the phone was fine. SEIDIO was pretty expensive though, so I went through 2 or 3 much cheaper rip-offs (sans holster) over the last couple yeats of my phone.
I think the traditional SEIDIO rubberized cases provided a good balance of protection without being too incredibly bulky.
I'm caught at an impasse now with the M8 because it is such a nice looking phone I'd like to show it off with more of a light and clear case. OTOH, I have a 2 year old that I'd like to protect it from. Also, the M8 is much bigger than the phones I've had in the past (height and width wise, thickness is actually thinner) - so I'm not sure how a thick case will influence my carrying it around.
I think the best solution for me may be a case that provides protection somewhere in-between a TPU and a Otterbox (i.e. middle ground) and ideally be able to fit into some holster. I feel that the holster is necessary due to the size of the phone in a jeans front pocket - especially if a case is grippy and hard to get out.
Anyway, the above thoughts are how *I* will be judging the cases and some of them may change my mind entirely (e.g. The Otterbox, which I really don't think I want, but thought I would give it a shot).
I'll ship all the ones I don't want back to Amazon. I figure $10 return shipping is a good investment to find the right case for 2 years of my life.
Let me know if you have any questions about the cases and I will try to answer them!
TraderJack said:
HTC M8 One 2 Puregear Kickstand Case Holster Combo - This one looks very similar to the Arduro/Minisuit, but I'm hoping the shell covers a bit more and/or the holster might be good with one of the other covers.
Click to expand...
Click to collapse
I would like to hear more about this one. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
d1ez3 said:
I would like to hear more about this one. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
Click to expand...
Click to collapse
Sure. I think the one from Verizon is identical to the Minisuit/Arduro ones I mention above. None of them look that slick...with the black cross-hatching. About they only thing they have going for them is a good holster setup...but that's why I'm hoping the Puregear has something else going for it rather than a slightly different design.
The cases will be here on Wednesday and I hope to try them all out then.
This is great.... Im very interested in SUPCASE Premium Hybrid Protective Bumper Case
but was holding off ordering from Amazon. Can you tell me how much thickness it adds and overall feel, comfort etc... I agree, I love the body of the M8 and needs to be shown off however it also needs to be protected at the same time.
How's spigen capsule clear? Is it a fingerprint magnet? I presume it's slippery?
As long as we're talking about cases, you should try looking at the Dualtek case for the M8. It's a little bulky but definitely protecting the phone and looks stylish. Feels great, too.
I've been using Otterbox cases for every phone since I switched to Android years ago but I agree that the Defender and Commuter cases make this phone too bulky. Luckily they have the Symmetry Series which is slimmer (one piece, plastic shell with rubber liner built in) but still provides great protection. Color schemes are limited, I went with black, but they have around 5 choices if you like brighter colors.
Cons are that the case is a little slippery for my tastes and it adds bulk to an already big phone but I drop my phone every day so it's a trade-off.
http://www.otterbox.com/Symmetry-Series-for-HTC-One-(M8)/htc28-one-m8,default,pd.html
I just got the cases this evening. I'll respond directly to the questions asked, and then I'll give my overview on the others:
d1ez3 said:
I would like to hear more about this one [HTC M8 One 2 Puregear Kickstand Case Holster Combo]. I have a similar one from verizon but it doesn't look that slick or feel great in my hand
Click to expand...
Click to collapse
The Puregear is almost identical to the Arduro and Minisuit cases as I assumed it would be. It has a slightly different cutout for the camera (which I like less), and a different surface texture from the cross-hatching type on the other two. You can clearly see the surface texture differences in the Amazon pics. While I like the design texture on the Puregear slightly better, it is really so equivalent in every other way that it isn't worth the $4-5 premium you would pay over the Minisuit. These are low bulk cases..good holster. These cases would do virtually nothing in a drop except maybe allow a bounce before the phone snapped out of it. That being said my similar case for the Droid took a few drops and the phone was no worse for wear.
cue_32 said:
This is great.... Im very interested in SUPCASE Premium Hybrid Protective Bumper Case
but was holding off ordering from Amazon. Can you tell me how much thickness it adds and overall feel, comfort etc... I agree, I love the body of the M8 and needs to be shown off however it also needs to be protected at the same time.
Click to expand...
Click to collapse
This one is maybe one of my favorite from the bunch. It is way easier to take on and off then the SUPCASE Unicorn Beetle Premium Hybrid Protective case I also purchased. Unlike the Beetle, the back is totally clear instead of frosted - so it shows off the phone. The sides however are not rigid like the Beetle, which is why it can be removed from the phone easier. The back is more rounded like the phone, whereas the Beetle is more squared. It has a slightly tacky feel...maybe not as much as the Spigen below, but it is grippy. I would say it is kind of your standard TPU type case, but of the utmost quality for these type. Since you can find TPU cases for $3-4, I think the $10 for this is not totally out of line. I'm really unsure that either of the SUPCASEs would offer any real protection from a drop. I will almost definitely be keeping one of these cases for now.
One other benefit of this case is that it fits into the Minisuit/Arduro holster really well.
richteralan said:
How's spigen capsule clear? Is it a fingerprint magnet? I presume it's slippery?
Click to expand...
Click to collapse
Despite the term "soft" being in the description in Amazon...I thought this was going to be a hard case - so I was a bit surprised.
It is actually not slippery at all, quite the contrary. I also don't think it is that bad of a finger print magnet. It is in some ways similar to the SUPCASE Premium Hybrid Protective Bumper Case I mention above, except that it is clear all around instead of having a black bumper. However (and I think I read this elsewhere in the reviews) the clear color of the case has a yellow tinge to it that is really disappointing since the main feature of this case is to showcase the phone. This case may have just a *bit* more cushion than the SUPCASE - but in all honesty I still don't think any of these are offering great drop protection. I think I prefer the SUPCASE (either one) to this one - it just doesn't have the same "sparkle" that you get from the pics.
Going onto the other cases.
The Otterbox and the SEIDIO - the two most expensive ones. And, probably because of that, the two biggest disappointments:
The Ottterbox was just ugly out of the box. I've never had one before because I always thought they were bulky and ugly - but I wanted to give it a chance. Even though the Otterbox probably would protect better than most of these, I still don't think it would be foolproof. I also really dislike the screen covering piece which is non-optional. For the cost, I just wouldn't consider something like this over the i-Blason (see below).
The SEIDIO had the same nice finish I was used to on their matte cases. I wasn't a huge fan of the two piece snap together design. I also got one with a slight manufacturing defect and the pieces didn't line up perfectly. Because of the two piece design, it was able to stay as a slim case but protect all around the edges. However I'm sure the case would snap open if the phone fell onto a hard surface. Additionally, as much as I enjoy the quick release holster of the SEIDIOs, they are not without their problems and can easily get caught on things and drop your phone (happened to me not infrequently with my other cases). The kickstand on this phone was also not that attractive being a bit flimsy and off to the side. Like the others, I also really don't know how much protection from a drop this would give you - probably somewhere just north of the SUPCASE/Spigen. Like the Otterbox, just not worth the money on this phone.
Finally the i-Blason... I think it is one of the better in terms of protection - being a 2-piece shell case. South of the Otterbox maybe, but better than the rest. Not a bad looking case, though not beautiful. I almost wish they had a model without the kickstand and big fat grooves on the back. I don't know if those grooves serve a real functional purpose, but if you removed those pieces you would have a much cleaner looking case with probably the same level of protection.
Looks wise - I think overall the SUPCASE Premium Hybrid is my favorite... I'm just not sure it is going to give me the protection I want from my toddler. I'm considering keeping that and the Minisuit (mostly for the compatible holster). Or, perhaps I will keep the i-Blason for most of the time around the house, but also the SUPCASE for a svelter pocket profile and when I want to show off the phone.
I'm going to keep looking I think for something else like the iBlason. I might give up on the holster idea altogether as I realize it isn't the 90s anymore. I need to see how well this phone does in my pocket over the next week or two to decide if it's a priority.
If you all have more questions on these, I'll do my best to answer.
I just purchased the Case Mate Naked Tough Case from Amazon. So far so good. It has some shock protection and still shows the good looks of the phone. I'm using it in conjunction with a Zagg glass shield. I would post a link, but I suppose I need to post a few more times before I can.
I've only used Otterbox defenders in the past. That being said, I just bought a M8 today and looked at the reviews on Amazon. A lot of people complain about the clear screen protector being bowed or warped and not tight against the screen. What's your impression on this issue? And from the sound and looks of the design, it sounds pretty similar to the M7.
Sent from my HTC One_M8 using XDA Free mobile app
FearlessAZ said:
I've only used Otterbox defenders in the past. That being said, I just bought a M8 today and looked at the reviews on Amazon. A lot of people complain about the clear screen protector being bowed or warped and not tight against the screen. What's your impression on this issue? And from the sound and looks of the design, it sounds pretty similar to the M7.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Definitely. Honestly I played with the otterbox for all of 30 seconds. First off, I just thought it was ugly...
Put it on and it seemed pretty bulky, although I was going to give it a chance since I knew that with that bulk came good protection.
The minute I touched the screen though I observed exactly what you are stating, the screen protector is not flush and that gave it an overall cheap feel.
So here is my update as I am leaving town for a couple of weeks and am choosing a case to come with me for the first real road test:
Based on my observations above, and the info from this thread, I think I'm going to stick with the Supcase Beetle.
While I like the SUPCASE Premium Hybrid Protective Bumper Case as well, I feel that it just doesn't offer great protection. Also, I find the volume buttons a little loose, as if they move too much off contact with the phone when you press on them.
The Beetle may only be a ~6-7 in the protection department, but the only ones that beat it are the Otterbox and probably the i-Blason. I just can't do the otterbox, and the i-Blason is a tad bulky and doesn't showcase the phone at all. I wish they removed the back nubbins and kickstand from the i-Blason. I haven't found a really nice and lean 2 piece case (internal silicon, hard outer shell). The Spigen 2-piece (not reviewed here) is a good contender for that role but it blocks the IR port, which is a non-starter (even though I will rarely use that feature, on principal I don't want a case that removes features from my phone).
So, for now I'm opting more for an "8 looks and 6/7 protection." The UAG looked like a good alternative that might have been 8 on both fronts, but from my thread linked above someone who has owned both feels that the Beetle is close on par with the UAG from protection standpoint. Price wise, the Beetle wins hands down.
I am still left though in a situation where I don't have a holster. I don't know yet how big of a problem that will be. I need to see how the Beetle does in my pants pocket over the next week. If it doesn't work out, and I can't find a compatible holster for the Beetle, I may have to abandon it all-together because it is just too hard to take it out of the Beetle on a regular basis to put into a holster-compatible case...I don't want to have to do that even weekly.
Dang. That is kind of a let down. I don't mind bulkyness at all but if that screen protector isn't tight, it's just pointless for me. I work construction and need something that won't allow the dirt to get between the screen and protector. I'll look into a few that you suggested. Thanks!
Has anybody found a good pouch or slip cover? I like to use my phone naked but with a pouch to protect it from scratches in my pocket.
I've looked. I've used a sena case before, they're nice. But they and melko are always late making stuff. I refuse to put my sim in until I get a pouch of flip case. I have yet to find one.
edit, i meant sena pouch
I usually get the black neoprene ones with the android printed on them for like $5 on eBay direct from China. Been searching but nothing Nexus 5X sized yet.
I'm waiting for this one to be released: http://mediadevil.com/us/catalog/product/view/id/2163%20/
http://www.fitbag.de/ do customised pouches. I've used them before a few times and they are high quality, however, they do take a bit to make and arrive so if you order you need to be patient
those artisan covers look good!