SGS II Boot Animation Zip Plus SGS II Binerys - Vibrant Android Development

Im Am not Responsible For Anything That Happens To Your Phone, Only Tested On Gingerbread So Its At Your Own Risk...
Sgs II Boot Animation Zip Taken From KE7
Plus SGS II Binerys Like Fugu Tweaks
Put Boot Animation zip In System/Media
Binerys Cwm Flashable

what is fugutweaks?
what is that for?
what rom can flash this?

kazumahits said:
what is fugutweaks?
what is that for?
what rom can flash this?
Click to expand...
Click to collapse
Make a backup of your rom and test it out on some 2.2 builds...help contribute and stop asking questions

bobbbb said:
Make a backup of your rom and test it out on some 2.2 builds...help contribute and stop asking questions
Click to expand...
Click to collapse
Geez! It was a simple question.

Works great on cm7 Thx!
Sent from my SGH-T959 using XDA App

kazumahits said:
what is fugutweaks?
what is that for?
what rom can flash this?
Click to expand...
Click to collapse
Its gingerbread binerys to help app process... Making it smoother on roms, any rom
Sent from my GT-I9000 using XDA App

For some reason, it wouldn't let me install the boot animation. It just hangs at installing update. Tried to install it on biwinning 2.2.1

Dattack said:
For some reason, it wouldn't let me install the boot animation. It just hangs at installing update. Tried to install it on biwinning 2.2.1
Click to expand...
Click to collapse
OP never said it was CWM flashable?
You have to push it using Root Explorer.

Dattack said:
For some reason, it wouldn't let me install the boot animation. It just hangs at installing update. Tried to install it on biwinning 2.2.1
Click to expand...
Click to collapse
I think it might Only be for gingerbread Im sorry if i didnt make it clear but I dunno, the thing is you must put it in media folder test it again it might work for 2.2.1... I only tested gingerbread
Sent from my GT-I9000 using XDA App

No it works on 2.2 had it running on V......u have to push it not flash it.....its just the boot animation that says samsung galaxy s II on it with the flashing s.
Project-V 6-5-11

Shortbus-Driver said:
No it works on 2.2 had it running on V......u have to push it not flash it.....its just the boot animation that says samsung galaxy s II on it with the flashing s.
Project-V 6-5-11
Click to expand...
Click to collapse
Yeah your right I didnt make it flashable but I meant I dont know if it would be compatible with any rom that not gingerbread, I only tested with gingerbread
Sent from my GT-I9000 using XDA App

what do the sgs binarys do?

lightninbug said:
what do the sgs binarys do?
Click to expand...
Click to collapse
Makes phone smoother updated app process
Sent from my GT-I9000 using XDA App

Binaries work on Bi-Winning 3?

Related

Help me Gingerbread ROM

I'm new to this forum.
I searched in this forum abt gingerbread rom.
I found nothing.
Why?
Galaxy s bootloader cracked or not?
What abt recovery?
Sent from my GT-I9000 using XDA App
svprm said:
I'm new to this forum.
I searched in this forum abt gingerbread rom.
I found nothing.
Why?
Galaxy s bootloader cracked or not?
What abt recovery?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
everything about gingerbread on this forum is unofficial, custom, what ever you want to call it... what seems to be your problem, you didnt make it clear about what your asking for.. but dont stress !!! help is at hand lol
Galaxy s have any unofficial or custom gingerbread rom?
Sent from my GT-I9000 using XDA App
http://forum.xda-developers.com/showthread.php?t=814091 you could try that its a custom ROM with gingerbread edition.
It is like a gingerbread rom.
Any ported rom from gingerbread ASOP?
Sent from my GT-I9000 using XDA App
yes its like gingerbread, im running it now, i like it and it is quick, with some nice features, why dont you give it a try and as for any ported gingerbread ROMs... i have no idea.. best to check thru the forums and see if anything pops up.
I want to install custom rom.
My phone is new with froyo latest version.
1.Root
2.Install Recovery
3.custom rom
Is it correct?
Sent from my GT-I9000 using XDA App
Thats Perfect man thats all u need, u dont need to root, but if u install Hardcores kernel that has the option to root
svprm said:
I want to install custom rom.
My phone is new with froyo latest version.
1.Root
2.Install Recovery
3.custom rom
Is it correct?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Any ROM you get from this forum will have installation instructions. This is the best place to start.
Gingerbread has not been officially released yet so I doubt you will find any ROMs based on it. Most custom ROMs are based on JPU and JPY (both FroYo), but they do have some Gingerbread elements installed.
Ian
Nice to see galaxy have recovery and 3 button mode.
Both are working on my galaxy.
Very easy to install custom rom.
But Xperia x10 need to root then install recovery and then custom rom.
Sent from my GT-I9000 using XDA App

[Q] How to change BootAnimation in Gingerbread?

how do you change the bootanimation in gingerbread? i'm not able to find system/media/bootanimation.zip in gingrebread.. Please help..
I'm also running Gingerbread in SGS.. tried to place bootanimation.zip into \sdcard\media and also on \data\local.. Entered a boot loop twice and had to restore via CWM.. PLEASE HELP!!! I want a certain bootanimation soooo much..
It depends on kernel and rom.Always read the first posts of kernel threads.
malcho said:
It depends on kernel and rom.Always read the first posts of kernel threads.
Click to expand...
Click to collapse
Yup yup gd luk with it
Sent from my GT-I9000 using XDA Premium App
Press Thanks If This Helped!
malcho said:
It depends on kernel and rom.Always read the first posts of kernel threads.
Click to expand...
Click to collapse
can it be a problem with the rom?
Difusal said:
can it be a problem with the rom?
Click to expand...
Click to collapse
No, it will be a a kernel-related issue.
Sent from my GT-I9000 using XDA Premium App
i usually place bootanimation.zip in /system/media
as already said, it depends on kernel.
eg. in Talon kernel the file must be named sanim.zip and goes to the same location.
it also can happen the kernel not supporting boot animations...
reading kernel instructions, usually is a good idea
venult said:
i usually place bootanimation.zip in /system/media
as already said, it depends on kernel.
eg. in Talon kernel the file must be named sanim.zip and goes to the same location.
it also can happen the kernel not supporting boot animations...
reading kernel instructions, usually is a good idea
Click to expand...
Click to collapse
I am using the 2.3.4 Gingerbread leaked ROM (XXJVQ).. Could you please link me a working kernel with that rom? I wanted to customize bootanimations so much
Difusal said:
I am using the 2.3.4 Gingerbread leaked ROM (XXJVQ).. Could you please link me a working kernel with that rom? I wanted to customize bootanimations so much
Click to expand...
Click to collapse
i'm not yet on JVQ (waiting for Juwe's update)
but i guess you can try Speedmod's one or Dark Core 2.8
Difusal said:
I am using the 2.3.4 Gingerbread leaked ROM (XXJVQ).. Could you please link me a working kernel with that rom? I wanted to customize bootanimations so much
Click to expand...
Click to collapse
Just ask for bootanimation-support in the related threads (but before asking always read the feature list of a kernel ).
Sent from my GT-I9000 using XDA Premium App

tablet won't start after installing custom rom

Hi, I have a rooted galaxy tab. I recently just installed a custom rom and after, it doesn't boot anymore? It only stucks at the boot screen. May I know what's the issue here? Is it a brick or something? Any helps appreciated. Tks!
it sounds like a soft brick, which isn't too bad at all Just switch your tab over to Download Mode and then flash another ROM that is confirmed working on your device.
A hard brick would be if your tab didn't power on in any way at all no matter what, and that would be pretty bad :/
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
bryanqjx said:
Hi, tks for ur reply! Do u mind telling me where to download those roms? Tks once again!
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Yah, mine is the galaxy tab 7 P1000 as well. But mine is not from the US. It's from Singapore.
Sent from my HTC Legend using XDA App
And I wanna gingerbread rom.
Sent from my HTC Legend using XDA App
espionage724 said:
yea sure, but what Tab do you have? For example, I have a Samsung Galaxy Tab 7 P1000 GSM (T-Mobile)
Click to expand...
Click to collapse
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
K. I also came across this roto JME pre-rooted firmware v4. Will this work as well?
Sent from my HTC Legend using XDA App
You need dbdata.rfs
bryanqjx said:
Hi! I managed to get my rom on samfirmware.com and even flashed it via odin. But one thing, it managed to go the boot screen but then it doesn't move at the "samsung" glowing screen after that. Did I do anything wrong?
Click to expand...
Click to collapse
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
yappoe said:
You may have a corrupted /dbdata. If that's true, no matter how many new ROMs or firmwares you install, it won't help you.
This should take care of your problem:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
Click to expand...
Click to collapse
I tried using the dbdata before. But it still doesn't work.
Sent from my HTC Legend using XDA
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
priyana said:
Your best bet will be to restock according to Overcome method.
Find Overcome thread in dev forum.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Izachii said:
I have the same problem before when i was flsshing back to the original rom. But i set my tab to download mode and flash it into a new rom then everything is settle. Btw, am using OC 4.1.0 rom running on 2.3.6! Try it.
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
Did you flash the overcome rom?
bryanqjx said:
Hi! Tks for your advice. I just read through the restocking steps on the teamovercome.net. But I've got a question. Is it compulsory to actually install the overcome kernel and rom?
Click to expand...
Click to collapse
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
yappoe said:
I installed overcome kernel with many other rom before moving to redpill (because of bluetooth keyboard compatibility). It works great with most of rom 2.3.3 and 2.3.6 base. Don't hesitate to try the kernel with other rom.
Btw, did you try pushing new pit file through odin?
Click to expand...
Click to collapse
I haven't tried this process yet cause I am curious whether if its necessary to flash the kernel and the rom. But since its good, I will try it later! Tks btw.
Sent from my HTC Legend using XDA

[Q] How to install ICS stock apk on cm9?

I downloaded the zip file from here [http://forum.xda-developers.com/showthread.php?p=26140930], but I cannot successfully flash it into cm9 in the recovery mode. Can anyone help? Thanks
Might be wrong, but think that the Samsung s suite will only work on Touchwizz roms.
Sent from my GT-N7000 using xda premium
Simonsuper said:
I downloaded the zip file from here [http://forum.xda-developers.com/showthread.php?p=26140930], but I cannot successfully flash it into cm9 in the recovery mode. Can anyone help? Thanks
Click to expand...
Click to collapse
CM9 is AOSP based. And None of the Stock Samsung ICS apps will work on it!!
Hope this clears!!
so if i wanna keep using cm9, I have to wait until there is an update including those apps?
They wouldn't work for this reason as well:
vijai2011 said:
Sorry cannot deodex it.
Click to expand...
Click to collapse
You cannot have odexed apps in a deodexed Rom (CM9).

Galaxy S I900 with Froyo on it

Hi, I just got my Galaxy S I900 today.
It has stock froyo 2.2 on it.
I want to flash JB.
Is it possible to just root my phone then flash Jelly bean without getting Gingerbread first?
Thanks.
PelegK said:
Hi, I just got my Galaxy S I900 today.
It has stock froyo 2.2 on it.
I want to flash JB.
Is it possible to just root my phone then flash Jelly bean without getting Gingerbread first?
Thanks.
Click to expand...
Click to collapse
You need to flash a 2.3.6 ROM, then get cwm (custom kernel) then flash cm10.1 three times. First time you flash it, you will get an error so don't worry.
Sent from my GT-I9000 using xda app-developers app
alb3rtt said:
You need to flash a 2.3.6 ROM, then get cwm (custom kernel) then flash cm10.1 three times. First time you flash it, you will get an error so don't worry.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Will do that.
Thanks alot !
PelegK said:
Will do that.
Thanks alot !
Click to expand...
Click to collapse
Don't write thanks, just press the thanks button
alb3rtt said:
You need to flash a 2.3.6 ROM, then get cwm (custom kernel) then flash cm10.1 three times. First time you flash it, you will get an error so don't worry.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Flash 2.3.6, root it using a custom kernel.
But install CM9 first and let it boot before flashing CM10.1 three times. Just to make sure you don't lose your IMEI.
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Flash 2.3.6, root it using a custom kernel.
But install CM9 first and let it boot before flashing CM10.1 three times. Just to make sure you don't lose your IMEI.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
The lost IMEI "bug" is fixed. Even if he does lose it, the .zip backs it up onto the sdcard and he can simply copy that folder (Efs) to the root of his phone.

Categories

Resources