Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
+1 get clockwork recovery...you need to make sure the rom you are flashing is compatible with the version of CWR you are using.
For example a rom that needs to be installed with CWR3 you will need to install the zip presumably from CWR2. Pull the battery and reboot back to recovery - you should now be in the updated version of CWR. Then for safety sake - re install your zip.
Reboot and you should be all set.
I had lots of trouble going from 2.2 to 2.3. Flashing between 2.3 roms is very easy comparatively
milkytron said:
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
Click to expand...
Click to collapse
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
pwnerman said:
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
Click to expand...
Click to collapse
I did have the bootloaders, I went back to stock before I did anything just to be safe. I'm gonna try what the other guys said though right now, wish me luck haha
jmtheiss said:
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
Click to expand...
Click to collapse
Alright so I have Andromeda 2.1 which is a froyo rom. Which method should I use to get to stock GB?
use Odin to flash gingerbread bootloaders then flash gingerbread roms
howtomen said:
use Odin to flash gingerbread bootloaders then flash gingerbread roms
Click to expand...
Click to collapse
I flashed the gingerbread stock rom and have it rooted with xcal's kernel, but when i flashed mosaic IV it got stuck at formatting partitions and i pulled the battery after about 15 minutes and then restarted my phone to find it stuck in a bootloop. So i had to start from stock again and now im back to gingerbread stock with root. I'm kinda scared to try again because it takes me like 30 minutes to get back to gingerbread stock with root. I think ill just stick with stock for a little bit
Related
I have nexus one. This is my story. I had rooted my phone using universial android. I installed cyanogen mod and was a very happy user until I saw the MIUI Rom and then I flashed that. Then I saw that it was to unstable so I restored to a backup I made of cyanogen. After I started using cyanogen mod again it was very unstable and had random reboots and lots of force closes. So I just decided I was done with the rooting business so I was gonna use a passimg. Acsently I flashed the Korean passimg and I can't flash any of the other ones(except the frg33one because i cant update to frg83 after and lose root) So on the Korean Rom I rooted and installed clockworkmod. Then I noticed I couldn't install any custom rom(i tried CM6, CM6RC3,MIUI)and I kept getting errors.So while I was in clockwordmod restored one of my old stockrom backups before i had flashed any roms and it worked. But still when went to go and try and flash a rom it still gave me errors. But the most ANNNOYING thing of all is i would flash clockwordmod in rommanager than i would touch reboot to recovery. It worked. I got into clockwordmod but then when i would try and go back again a second time it wouldn't be there. It would be the stock android recovery and even when i would go to recovery though the bootloader it would still be stock recovery. I dont know what to do. As i said my bootloader isnt unlocked because i dont want to void my warrenty. my inital plan was if i ever needed to return this ting i could just i could just run a passimg and restore to to stock everything and there would be no traces. If i have to return my phone it would have to be last resort because I live in Canada and I would have to play ridiculous duties and taxes on it. Now i just want to make sure im able to install gingerbread on when it comes out. Also i forgot to mention that everytime i try to update my phone to 2.2.1 it always fails even though im on stock recovery(although even when i go into recovery and it is the stock recovery rommanager still says im running clockwordmod) PLEASE HELP!!!
ps. Im only 13 but i consider myself to be pretty techsmart for 13. I wouldnt mind using cmd/terminal and im running ubuntu 10.10 on my laptop.
ajam100 said:
I have nexus one. This is my story. I had rooted my phone using universial android. I installed cyanogen mod and was a very happy user until I saw the MIUI Rom and then I flashed that. Then I saw that it was to unstable so I restored to a backup I made of cyanogen. After I started using cyanogen mod again it was very unstable and had random reboots and lots of force closes. So I just decided I was done with the rooting business so I was gonna use a passimg. Acsently I flashed the Korean passimg and I can't flash any of the other ones(except the frg33one because i cant update to frg83 after and lose root) So on the Korean Rom I rooted and installed clockworkmod. Then I noticed I couldn't install any custom rom(i tried CM6, CM6RC3,MIUI)and I kept getting errors.So while I was in clockwordmod restored one of my old stockrom backups before i had flashed any roms and it worked. But still when went to go and try and flash a rom it still gave me errors. But the most ANNNOYING thing of all is i would flash clockwordmod in rommanager than i would touch reboot to recovery. It worked. I got into clockwordmod but then when i would try and go back again a second time it wouldn't be there. It would be the stock android recovery and even when i would go to recovery though the bootloader it would still be stock recovery. I dont know what to do. As i said my bootloader isnt unlocked because i dont want to void my warrenty. my inital plan was if i ever needed to return this ting i could just i could just run a passimg and restore to to stock everything and there would be no traces. If i have to return my phone it would have to be last resort because I live in Canada and I would have to play ridiculous duties and taxes on it. Now i just want to make sure im able to install gingerbread on when it comes out. Also i forgot to mention that everytime i try to update my phone to 2.2.1 it always fails even though im on stock recovery(although even when i go into recovery and it is the stock recovery rommanager still says im running clockwordmod) PLEASE HELP!!!
ps. Im only 13 but i consider myself to be pretty techsmart for 13. I wouldnt mind using cmd/terminal and im running ubuntu 10.10 on my laptop.
Click to expand...
Click to collapse
If you installed the original passimg then you'll have 2 files you'll want to remove if you don't want the stock recovery to keep flashing back when you reboot
Remount /system rw and remove:
rm /system/etc/install-recovery.sh
rm /system/recovery-from-boot.p
Remove those, flash your custom recovery and you should be good to go.
With respect to the errors: Clear out the cache and dalvik-cache. Wipe and install your rom of choice, be it a stock repack, CM6, Enom etc.
With Amon's latest recovery *1.8.0.1 you can flash both signed (google) and signed (test) packages, so the official update will flash as well as a repack. If you flash the official 2.2.1 remember to pull remove those 2 files again or it will blow away your custom recovery on reboot.
Trying to install the Cynogen ICS ROM, and when installing the .zip, it loads the Samsung flash screen with Cynogen, then get the green guy and loads of text for about half a second, then it just reboots. Over and over for about 10 mins. WHat went wrong? What should I do?
It happend the same to me.
I just removed the battery and put it back, entered in CWM and reinstalled the ROM.
Good luck!
I somehow got into a recovery mode, but with the assumption it would all go wrong again, tried to install the .zip Darky rom instead, went through the process and said it worked but then it just went back to the Cynogen loop problem!? I just tried a Restore instead, but I haven't rebooted yet, should I wipe everything again, and try the ICM .zip again?
Yep, just go with the whipe. I hope you did a backup.
OK turns out the Restore failed, so now trying to reinstall ICS .zip again. fingers crossed!
yep backed it up, not that its seems to have helped.
Well now it's stuck in the Galaxy S bootscreen...
that really sucks....did you deactivated the lagfix before running the rom?
If the problem persists you have to run a basic ROM using ODIN.
Yes deactivated the lagfixI can't get into recovery or anything now, except download mode.
Download mode is all you need to run a ROM with Odin.
I recommend Amestris, it is a good ROM, good battery life but the thread in not complete, there are some files missing...for now.
I've put some older ROM on I had, then tried to install ICS again but now when I use Clockwork, and select the file it goes to recovery but I can't select any zip files, just reboot back to this awful old ROM!
I had same issue when I installed ics, what I did that worked was pull battery and go back into cwm, reflashed ics zip and it fully installed that time. Had same experience when flashing cm7 before.
Not getting anywhere with this. I get an option to install zip from sdcard which is where the update is (an where the darky update also is which worked), but there is an option to update from internal SD, which is not where the file is. Is it in the wrong place?
I think you would be best to use Odin 1.3 to flash DarkyROM Ficeto JVT base rom.
are you sure those files are still on your sd card?
The reason you need to pull the battery and reflash the ICS rom a few times is because Samsung ROM (most) have a different partition layout to CM7 based roms (which the ICS port is one).
GL.
So I updated the MIUI on my Cappy from whatever I had before to 2.3.30 that is GB 2.3.7 from this location:
http://miuiandroid.com/community/threads/archived-miui-versions-captivate-gb.16558/
I didnt care for it so I downloaded SlimICS. I downloaded the base and the cappy essentials. Put them both on my internal sd. I factory reset, wiped data, cache and system and dalvic, just as i do for every phone i work on. I ran the SlimICS base and now it keeps rebooting and going back into recovery and doing this:
Finding update package...
Opening update package...
Installing update...
Slim ICS
Once Slim ICS pops up, it reboots and does it all over. I can yank the battery and manually go into recovery, but if i try to boot it up normal, it goes back into the loop. I am on CWM 5.0.2.7 also.
So what did i miss?
GB bootloaders most likely missing - flash 'em using Heimdall. And SlimICS doesn't have modem. So. Flash my ROM for a change may be.
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
And you flashed the base and the cappy essentials right? Not just the base
Sent from my SGH-I897 using xda premium
korockinout13 said:
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
Click to expand...
Click to collapse
trying to flash again just put it back in the loop. And I read that that does happen alot going from GB to ICS on the Cappy. But for Slim it didnt work.
Wdustin1 said:
And you flashed the base and the cappy essentials right? Not just the base
Click to expand...
Click to collapse
I never could get that far because it was the base that I started to install and it got bootlooped on, everytime it restarted, it went back into recovery and started to run the base again, and repeated boot loop. I read somewhere that teamhacksung's rom would get me over the GB to ICS bridge. This one here:
http://forum.xda-developers.com/showthread.php?t=1363760
It did the bootloop to, but when i yanked the battery and went back in and installed it a 2nd time, it didnt restart and installed correctly. After that I installed SlimICS. But I dont like it as much as i thought i would and now when i try to reinstall teamhacksung ROM, it errors out during the beggining of the installation. The MD5 is still fine. I dont think it likes the version of CWM recovery that SlimICS installed. I know CWMR went to an older version when i went from teamhacksung to SlimICS.
Flash glitch kernel first. Also, don't use the builds from that thread, it is old. Just flash the latest CM9 nightly
Swyped from my ICS Samsung Captivate
Stuck in A boot loop after flashing paranoid rom to cappy i897
I downloaded all needed files to internal SD just as the (how to upgrade the captivate i897 to Paranoid ROM said to do )
wipe data factory reset,wipe cache,selected install zip zip>package (pa_captivatemtd-1.99-13AUGUST2012.zip, md5sum: cc03bacf0f07a94bf25b482d64b94e63) then it started boot looping / att screen twice then android guy ,, then falling over with exclamation point in the middle of him , let it go considering options of 3 button combo weren't working ,, beside guide said 5-10 min to install then it made it to devil kernel installed gapps >> (gapps-jb-20120726-signed.zip, md5sum: f62cfe4a827202899919fd932d5246d7) now back in the boot loop again>>
i did make a nandroid backup but cant seem to get into cwm recovery or download mode . I did follow that guide to a tee.
any help or suggestions on this i would greatly appreciated if this post in wrong spot sry im new.
Also stuck in bootloop reverting to Gingerbread
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Reply Back.
HG_User said:
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Click to expand...
Click to collapse
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out. ??
---------- Post added at 06:38 PM ---------- Previous post was at 06:27 PM ----------
321321wrick said:
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out.
There also Ginger Bread Boot loaders Needed for it to start up Correctly - i personally don't know that much bout gingerbread rom i didn't like it as much as froyo WiFi issues'' the the stock odin should erase all info on your part thou 'e use Is OCD 1 i897UCJF6>lowercase work every time for me.
cept now because my usb is not able to charge phone or enter download mode or recovery which leaves jig option .
Click to expand...
Click to collapse
HG_User,
U can't go back to GB (or froyo/eclair) from CM, MIUI, ICS, JB, AOSP etc., etc. without using Odin or Heimdall---because of the different partitions used---Stock firmware is bml/rfs and all the AOSP etc etc are mtd/yaffs(2).
And u can only restore a backup when u r back running the base rom where u made the back up.
Use this...Stock i897ucKK4 GB 2.3.5 with or without bootloaders... http://forum.xda-developers.com/showthread.php?p=18370912
This kk4 should get u going. Then u can use Odin to flash Corn Kernel to get a cwm back...:thumbup:
Sent from my SGH-I897 using xda premium
... one step on the way: Back to Eclair
thanks for the advice. Ultimately, I decided I should use Odin 3 1-click to revert back to original (2.1 Eclair) firmware that I found on the first post of thread titled
[STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
This is a huge step forward because it makes my phone work, but it's also a step back in time to the early Eclair days.
Now my next step is to upgrade back to Gingerbread...
Edit: Thanks to all who pointed me in the right direction. I took the phone back to Eclair then used Samsung KiesMini (twice) to get it back to Gingerbread. After re-rooting and removing the AT&T Bloatware, it works fine again. I might try upgrading again to ICS or JB, but I didn't like Cyanogen 9 at all. Maybe I'm just used to the way AT&T polishes the UI, but Cyanogen didn't appeal at all. Now looking for a relatively polished but lightweight ICS or JB version... Also, it would be nice if when I upgrade it preserves the installed apps and what's on my home screens, but that seems unlikely going from AT&T-branded Gingerbread to an independent ICS or JB.
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
skiddyrow said:
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Click to expand...
Click to collapse
you better use the overcome stock gingerbread safe 5 (the best stock for all situations) google overcome.com and get the files, you will find also a tutorial for how to stock your tab before updating it to overcome or cm9 etc...
If I helped you, please press the thanks button
MarlX said:
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
Click to expand...
Click to collapse
so the reflash from scratch works for you
If I helped you, please press the thanks button
Thanks sos_sifou - worked great! I think I'll stick with the Overcome GB ROM for a while as it works pretty good, and look at CM9 / 10 whenever it gets stable!
I have had my captivate for a while now and I have had a few problems with flashing Cyanogen based Roms since I went to CM7 then back to stock a while back.
I had CM7 running fine and went up to CM9 for months. I just recently went to REMics and had a problem with the sound and at the same time I had problems with my power button I the flashed to Paranoid Android for a few hours and was driving around so I took my phone to the AT&T warranty center to see about them replacing it and im out of warranty so I had them flash it to stock now I cant get my phone to CM7 I can get it to run Serendipity just fine but no CM7 can someone PLEASE help? It seems like I need to COMPLETELY clear the phone of all old rom data. Any solutions?
Try using one of these Stock I897UCKK4 Android 2.3.5 One Clicks and then flash the KK4 Corn Kernel version 7.0A to get the CWM Recovery u need to move on to what you are wanting to flash per that Rom's specific install instructions.
Done that
I have put my phone back to stock KK4 with and without bootloader. I had this problem before when I was going to CM7 the second time. Its just getting SO annoying now. Thanks though!
I forgot to say that when I go to flash the rom through CWM it starts reboots the phone the samsung Cyanogen screen comes up flashes onces then goes into CWM flashes a few things quickly and the last image I see is the "dead" androind laying on its back with the sign aboveits open front door.
I'm starting to think there is no help. Maybe I can trade my friend my captivate for his.
Have you tried flashing CM7 again after you see that CWM screen? I've always had to flash CM7 twice for it to take - once to get the MTD setup in place, a second time to actually flash the rom. You'll have to hold down V+/V-/Power to get to recovery while it's looping, but once it's there, try flashing CM7 again.
jmtheiss said:
Have you tried flashing CM7 again after you see that CWM screen? I've always had to flash CM7 twice for it to take - once to get the MTD setup in place, a second time to actually flash the rom. You'll have to hold down V+/V-/Power to get to recovery while it's looping, but once it's there, try flashing CM7 again.
Click to expand...
Click to collapse
I have tried with cm9 but not 7. I will try that once I get sick of Serendipity. I just set everything back up on this rom and installed my apps so I will wait a few more days.
Thanks You!