Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
skiddyrow said:
Would appreciate if someone could help me with my problem - I had earlier used CF-Root to root and install recovery which went off well, took a nandroid backup and then tried to flash CM9 through recovery. WIthin a few seconds it rebooted, showed the Cyanogenmod splash screen and went back into recovery - only this time it was a newer recovery (6.0.0.2) than what CF-Root had installed. I'm not able to install through zip file and for some reason I am not able to restore from nandroid as it says the md5 does not match. So as of now I am stuck in recovery.
To add to this, I realize that I messed up as the instructions said to update to a GB rom if coming from Froyo, which I did not notice. Any idea what I can do from here? If I can still run through this process can someone point me in the direction of a suitable GB ROM I can install? My end goal is to be on CM9, but right now would just be happy to get back to the stock GB ROM as well.
Click to expand...
Click to collapse
you better use the overcome stock gingerbread safe 5 (the best stock for all situations) google overcome.com and get the files, you will find also a tutorial for how to stock your tab before updating it to overcome or cm9 etc...
If I helped you, please press the thanks button
MarlX said:
Flash to the stock firmware again? at SamMobile? That is what I did when my device did not boot up after installing CWM recovery and some rom.
Click to expand...
Click to collapse
so the reflash from scratch works for you
If I helped you, please press the thanks button
Thanks sos_sifou - worked great! I think I'll stick with the Overcome GB ROM for a while as it works pretty good, and look at CM9 / 10 whenever it gets stable!
Related
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
+1 get clockwork recovery...you need to make sure the rom you are flashing is compatible with the version of CWR you are using.
For example a rom that needs to be installed with CWR3 you will need to install the zip presumably from CWR2. Pull the battery and reboot back to recovery - you should now be in the updated version of CWR. Then for safety sake - re install your zip.
Reboot and you should be all set.
I had lots of trouble going from 2.2 to 2.3. Flashing between 2.3 roms is very easy comparatively
milkytron said:
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
Click to expand...
Click to collapse
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
pwnerman said:
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
Click to expand...
Click to collapse
I did have the bootloaders, I went back to stock before I did anything just to be safe. I'm gonna try what the other guys said though right now, wish me luck haha
jmtheiss said:
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
Click to expand...
Click to collapse
Alright so I have Andromeda 2.1 which is a froyo rom. Which method should I use to get to stock GB?
use Odin to flash gingerbread bootloaders then flash gingerbread roms
howtomen said:
use Odin to flash gingerbread bootloaders then flash gingerbread roms
Click to expand...
Click to collapse
I flashed the gingerbread stock rom and have it rooted with xcal's kernel, but when i flashed mosaic IV it got stuck at formatting partitions and i pulled the battery after about 15 minutes and then restarted my phone to find it stuck in a bootloop. So i had to start from stock again and now im back to gingerbread stock with root. I'm kinda scared to try again because it takes me like 30 minutes to get back to gingerbread stock with root. I think ill just stick with stock for a little bit
Okay I have a Samsung I9000m I got yesterday. I made a copy of my EFS from what I Can tell and copied it to my PC. I currently am Running stock Rogers Firmware 2.3.3 and want to install a 4.0.4 firmware like Dark Knights 3. IS there anything else I need to do or can I just copy it to the root of the phone and install it with clockwork or is there something else I am missing. I go to recovery but it is the stock recovery, this is where I ma thinking I am missing something. The phone is also rooted. Can any one point me in the right direction. And yes I been looking on the forums and not seeing what I need.
Thanks
KillerbawX said:
Okay I have a Samsung I9000m I got yesterday. I made a copy of my EFS from what I Can tell and copied it to my PC. I currently am Running stock Rogers Firmware 2.3.3 and want to install a 4.0.4 firmware like Dark Knights 3. IS there anything else I need to do or can I just copy it to the root of the phone and install it with clockwork or is there something else I am missing. I go to recovery but it is the stock recovery, this is where I ma thinking I am missing something. The phone is also rooted. Can any one point me in the right direction. And yes I been looking on the forums and not seeing what I need.
Thanks
Click to expand...
Click to collapse
If you can not enter CWM Recovery mode, you can not install ICS. You need to install a kernel such as Semaphore (installed with ODIN in box PDA) and you can install it and ICS with no problem.
Oh I forgot, when you go to install ICS, you must remove the MicroSD, but may occur Bootloop.
and backup the the efs folder first!!!
Sounds like clockworkmod is not properly installed.
Revert to stock using odin. Then install CF-root
http://forum.xda-developers.com/showthread.php?t=788108
This will root your stock rom and install clockworkmod.
OK I have a GT i9000 and I did manage to get into CWMode.
Now each time I try to install new custom ROM (I choose the zip from the SD card) 5secs after it starts installing it reboots and winds up in the blue CWM recovery screen. Tried different ROM's but - nada.
Any feedback?
D_NazGUL said:
OK I have a GT i9000 and I did manage to get into CWMode.
Now each time I try to install new custom ROM (I choose the zip from the SD card) 5secs after it starts installing it reboots and winds up in the blue CWM recovery screen. Tried different ROM's but - nada.
Any feedback?
Click to expand...
Click to collapse
You need to update the bootloader to a newer version. Install a 2.3 stock rom first and it should be fine.
Trak-X said:
You need to update the bootloader to a newer version. Install a 2.3 stock rom first and it should be fine.
Click to expand...
Click to collapse
Well I thought 'cause I'm on GB 2.3.3 it is OK.
Do I really need a new bootloader?
UPDATE: I managed to install the ROM. Dunno why, but on the second CWM screen I again choose to install the zip and it did the job.
hi everyone
i start flash custom roms couple days ago, trying out "temasek's UNOFFICIAL BUILD RC1-94" everything work great, just some of the .apk was not working, so i decide to go back to stock roms, i thought it be simple process restore it backup, but adter it restore LG logo keep boot and restart. so i start reading found this thread i try it out, load it install this zip file,
http://forum.xda-developers.com/showthread.php?t=1021554
now i can't return to recovery menu, and it keep booting and restart, please what can i do now did i brick the phone, i'm so lost right now, please help thanks
after many try and ton of reading, i thought my is total brick, trying out smartflash method also get error when flashing, thank to this post from "75markus " i was able to restore back to 2.2 froyo
http://forum.xda-developers.com/showpost.php?p=25120132&postcount=6
Next time don't forget to flash Back2Ext3 before restoring stock backup
Durio said:
Next time don't forget to flash Back2Ext3 before restoring stock backup
Click to expand...
Click to collapse
Yes - that happened to me also. My first "bad" experience with flashing
from what i read CM7 running ext4, stock runing ext3 right?
so now i'm back with stock running froyo, i still have my backup files on with sd card. Do i root and install rom manager then install Back2Ext3, and final running restore? will this restore back to my original state since i backup using cwm to backup.
thank guy
yes, cm7 uses ext4 system mount. i just use a zip file which i flash from recovery if i need to get back to ext3.
here it is btw if you are on stock froyo and want to restore stock gingerbread (if i understood you right) you dont need to use back to ext3 again, just restore your back up.
phihung07 said:
hi everyone
i start flash custom roms couple days ago, trying out "temasek's UNOFFICIAL BUILD RC1-94" everything work great, just some of the .apk was not working, so i decide to go back to stock roms, i thought it be simple process restore it backup, but adter it restore LG logo keep boot and restart. so i start reading found this thread i try it out, load it install this zip file,
http://forum.xda-developers.com/showthread.php?t=1021554
now i can't return to recovery menu, and it keep booting and restart, please what can i do now did i brick the phone, i'm so lost right now, please help thanks
Click to expand...
Click to collapse
Restore stock backup from CM needs to flash an ext4-backto-ext3 zip with cwm, what a pity you overwrite cwm with stock recovery.
Now you should try to rescue your phone with SmartFlash, finally consider nvflash method.
xilw3r said:
yes, cm7 uses ext4 system mount. i just use a zip file which i flash from recovery if i need to get back to ext3.
here it is btw if you are on stock froyo and want to restore stock gingerbread (if i understood you right) you dont need to use back to ext3 again, just restore your back up.
Click to expand...
Click to collapse
well i notice the froyo firmware is way faster than the GB i have, no lagg at all battery is really good, is there any GB stock rom run smooth without bloatware.... (like international version)
phihung07 said:
well i notice the froyo firmware is way faster than the GB i have, no lagg at all battery is really good, is there any GB stock rom run smooth without bloatware.... (like international version)
Click to expand...
Click to collapse
If you mind, try Django Manouche, Custom but stock based ROM http://forum.xda-developers.com/showthread.php?t=1410662 . I tried many CM and MIUI roms but always ended restoring Django back
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Dear friends,
Little background. I was on CM10 stable, but decided to I update to CM10.1 M1, After the update, had no market, however, so I tried to downgrade to CM10 stable and it bricked. So .. back to stock it is! Now I am having trouble getting out of stock. I am not new to flashing, but I never had this kind of a persistent problem.
The short summary of what I get no matter what I try is: Every kernel that is not the stock Eclair kernel has boot-animation messed up (random lines of color on screen), and I cannot enter recovery - I sometimes can boot sometimes cannot.
Steps I have taken
I went back to stock Eclair rom + non-root kernel (LINK).
I rooted (LINK)
But when I tried to update kernel to allow CWM, it bricked my phone. So back to stock, again!
I tried this a few times. Now, the latest attempt, I tried the stock 2.3.5 rom + rooted, CWM kernel (LINK... I get the phone running, but I cannot get into recovery, and no utility that has "reboot to recovery" has managed to get me into recovery.
The plea
All I want is CWM, so I can install what I want. Without it, I am stuck with Odin one-click and Odin flashable packages (Heimdall does not want to work right for me - the drivers are messed up - and trying to fix those brkeas my Odin drivers).
I have no data on the phone at the moment, I can reinstall everything if need be .. but I am out of ideas besides keep trying different roms and kernels until something gives me CWM and I am free again.
I have AT&T GB bootloaders.
thanks for any help, I will try to provide any additional info I can.
dozyaustin said:
Dear friends,
Little background. I was on CM10 stable, but decided to I update to CM10.1 M1, After the update, had no market, however, so I tried to downgrade to CM10 stable and it bricked. So .. back to stock it is! Now I am having trouble getting out of stock. I am not new to flashing, but I never had this kind of a persistent problem.
The short summary of what I get no matter what I try is: Every kernel that is not the stock Eclair kernel has boot-animation messed up (random lines of color on screen), and I cannot enter recovery - I sometimes can boot sometimes cannot.
Steps I have taken
I went back to stock Eclair rom + non-root kernel (LINK).
I rooted (LINK)
But when I tried to update kernel to allow CWM, it bricked my phone. So back to stock, again!
I tried this a few times. Now, the latest attempt, I tried the stock 2.3.5 rom + rooted, CWM kernel (LINK... I get the phone running, but I cannot get into recovery, and no utility that has "reboot to recovery" has managed to get me into recovery.
The plea
All I want is CWM, so I can install what I want. Without it, I am stuck with Odin one-click and Odin flashable packages (Heimdall does not want to work right for me - the drivers are messed up - and trying to fix those brkeas my Odin drivers).
I have no data on the phone at the moment, I can reinstall everything if need be .. but I am out of ideas besides keep trying different roms and kernels until something gives me CWM and I am free again.
I have AT&T GB bootloaders.
thanks for any help, I will try to provide any additional info I can.
Click to expand...
Click to collapse
Messed up screen = wrong bootloaders. Flash Odin KK4 with bootloaders
From there, follow this link.
Finally, you can get back up on CM10.1 - Btw, you had no market cause you didn't flash their Gapps.
UPDATE .. ugh that took a while:
1) From the master list LINK, wet back to 2.1, I897UCJF6
2) From the same thread installed I897UCKF1 with bootloaders
3) rooted: LINK (I know -not XDA)
4) removed the 3e recovery lock (LINK) - this did not seem to work, but I did do it.
5) installed Speedmod kernel from here LINK - this did not boot, but it did install CWM
6) installed CM10.0 Stable from SD cadr - twice
7) installed gapps
8) just did my first boot to CM10.
This is both a record for myself for later, and for anyone else that may find this useful.
BWolf56 said:
Messed up screen = wrong bootloaders. Flash Odin KK4 with bootloaders
From there, follow this link.
Finally, you can get back up on CM10.1 - Btw, you had no market cause you didn't flash their Gapps.
Click to expand...
Click to collapse
Ooooh. I learn something new every day! Thanks.
Sent from my SGH-I897 using xda app-developers app