Database Develop

[Q] The simplest way to upgrade from Froyo to Gingerbread

Hi All,
Is there someone who willing to show me the simplest way to get official Gingerbread Firmware for my Gtab? I was reading too much of posts it,make me confuse really,mb show me the way to upgrade to Gingerbread without any root,bootloader or something similiar... for ur reference,i show you guys my Gtab firmware attached. Thanks Before

If your present firmware was the one that came with when you bought your phone then Kies is the easiest way to upgrade.

the easist way . i don't know you from where .. but you can visit samfirmware.com grab your stock gingerbread rom . put your phone in download mode , plug your tab via odin put the rom you downloaded in PDA section .. without pressing anything .. hit the start button your tab will reboot in download mode again unplug it . turn on your tab . wait until its change your system and don't worry about the 2 red lins after it finish your tab will reboot with gingerbread if that was helpful hit the thanks button and also hit it for "bongski55"

k0sh said:
the easist way . i don't know you from where .. but you can visit samfirmware.com grab your stock gingerbread rom . put your phone in download mode , plug your tab via odin put the rom you downloaded in PDA section .. without pressing anything .. hit the start button your tab will reboot in download mode again unplug it . turn on your tab . wait until its change your system and don't worry about the 2 red lins after it finish your tab will reboot with gingerbread if that was helpful hit the thanks button and also hit it for "bongski55"
Click to expand...
Click to collapse
I've rooted my Gtab just now i am goin to try overcome v2.0.1 but i am stucked at ClockWorkMod Recovery... Is there anybody to show me how to get it installed in my Gtab? Thank you.

ayong chia said:
I've rooted my Gtab just now i am goin to try overcome v2.0.1 but i am stucked at ClockWorkMod Recovery... Is there anybody to show me how to get it installed in my Gtab? Thank you.
Click to expand...
Click to collapse
go and follow their guide its so easy to do so .... flash stock safe , 1st then flash it ... follow their guide if you don't want to end up in empty road when there is no petrol and its long road and dark

ayong chia said:
Hi All,
Is there someone who willing to show me the simplest way to get official Gingerbread Firmware for my Gtab? I was reading too much of posts it,make me confuse really,mb show me the way to upgrade to Gingerbread without any root,bootloader or something similiar... for ur reference,i show you guys my Gtab firmware attached. Thanks Before
Click to expand...
Click to collapse
Read this.
If you cant follow the guide linked in the thread then you shouldn't be flashing roms to your device and instead wait for official update via Samsung Kies.

Bricked Galaxy Ace

I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!

jleonnn said:
I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!
Click to expand...
Click to collapse
Am not an expert but i would take battery out then put back in holding volume down key home key and power key at sametime to put into download mode then flash your stock rom via odin to get it back running again
have you done a datwipe in cwm after installing? try that first

Hey there!
Before We get to ODIN
Start phone in recovery mode ( Center Button + Power Button ) and then:
- Do a Factory Reset
- Do Wipe Cache
Then Reboot
If he boots great!
If not and still remains at ACE screen do this:
1st - Download Odin 4.38 (http://www.4shared.com/rar/UqBhp5Qd/Odin_Multi_Downloader_v438_www.html)
2nd - Download Cooper.ops (http://hotfile.com/dl/138852983/36a55ea/Cooper_v1.0.ops.rar.html)
3rd - Go to http://www.sammobile.com/firmware/ and search firmware for your s5830
Then choose the rom that suits you best (download one from your country if possible)
After the above steps are done open odin
At "option" select - "One Package, Auto-Reboot And Protect OPS"
At "select OPS" - choose "Cooper.ops" (The file you´ve downloaded)
At bottom is "One Package" - In here put the file of the room you´ve dowloaded
Finaly put phone in download mode (Vol. Down + Power Button) and connect it to your PC.
Wait for odin to recognize your phone, a yellow sign will light up, ( you need samsung kies in your computer so odin recognize your phone)
And then hit "Start"
Wait about five minutes at the end your phone should reboot by itself
And that should be it
If your phone reboots but stuck ate samsung boot animation.
Remove Battery
Put it back again
Turn your phone into recovery mode ( Center Button + Power Button )
Do Wipe Factory/Reset and Wipe cache, reboot,
and your good to go!

I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand
Click to expand...
Click to collapse
the blue triangle isn't this CWM 5?
or if can you get to recovery mode try flashing the original stock recovery first
http://forum.xda-developers.com/showthread.php?t=1437426
then install a stock rom with Odin
and boot from the stock recovery to fix the phone boot
if recovery is working you should fix the phone easily with stock rom.

installing a stock rom will install the stock recovery by itself!
so no need to flash stock recovery before flashing stock rom!

Can someone please explain what went wrong here in the first place?
Sent from my S5830L using XDA App

Honestly i cannot tell!
But probably the custom rom wasn't compatible!
Or during the rom istallation something went rong
... only suposing

That blue triangle is coz of cwm 4
Sent from my GT-S5830 using xda premium

wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....

You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep

EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
What's that? I'm still a noob I dunno...

ambujpriyadarshi1991 said:
wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....
Click to expand...
Click to collapse
For your information,icsunday does not need cm to be pre installed...what you said was completely wrong..
Sent from my SamsungGalaxyAce with my hands,take it or leave it

EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
+1..i people don't know what they are talking about,then they shouldn't reply..
Sent from my SamsungGalaxyAce with my hands,take it or leave it

jleonnn said:
What's that? I'm still a noob I dunno...
Click to expand...
Click to collapse
CF-ROOT is a kernel..
Sent from my SamsungGalaxyAce with my hands,take it or leave it

Can someone please explain CF-ROOT to me pleaseeee

BTW Can someone give me a link for a good working stock rom for my ace? Thanks in advance

jleonnn said:
btw can someone give me a link for a good working stock rom for my ace? Thanks in advance
Click to expand...
Click to collapse
google google and google :d

Doo:DAce said:
google google and google :d
Click to expand...
Click to collapse
I mean a real link... The only link I see is to hotfile and for some reason I CAN'T DOWNLOAD T.T

I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything

SnowPluralism said:
I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything
Click to expand...
Click to collapse
Alrighty thanks... Cuz on hotfile I pressed download they told me the file was downloading but I couldn't find anything. But thanks nonetheless

[Q] Samsung Galaxy s stuck in loop with Ultimate rom ?

Hi Guys,
apologies in advance but I have Galaxy S and since this morning it s just in boot up mode was flashed and rooted with ( Ultimate Rom ) so all i get when i press power button is ultimate home page and then second ultimate loading up page and thats it does not open up properly and it vibrates too ??
I have tried the volume up button power button and home button but nothing just comes up galaxy s black page then ultimate then back to Back Galaxy page < Please help as im so crap at this and got help from someone on here a while plase advise and help in english lol ???
Thanks
charlie2

Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA

Talon26 said:
Well first you are going to have to achieve either recovery or download mode.
Recovery: hold volume up + home and the hold power until the first screen pops up. Keep holding for about half a second. Which longer than instant lol
Download: same as above but volume down.
If you get to recovery try a wiping cache and dalvik. Then try boot up. If that doesn't work then you'll have to wipe/factory reset from recovery.
If that doesn't work then either download a stock firmware by Ramad on the general forum or go sammobile.com or type in darky in Google and go to his website and navigate to full releases. From there click on the latest for your phone sgs i9000. Scroll down to instructions and look for the link for 10.2 re or something similar. Its the Odin flashable rom. Alternatively just look for a from you like and flash it. If you have recovery you may be able to use CWM flash able zips otherwise you will need Odin flash able files from the places above.
Darky rom will retain root and is a custom from so it'll be easier to move to another custom from if you flash that.
That cover everything
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??

can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551

charlie2 said:
Hi Talon26,
I have tried the 3 button recovery and download and nothing nada ??
Click to expand...
Click to collapse
Yes you can use a jig that would be easiest and best for the future in-case you run into this again...
However i don't understand why download or recovery is not working if you are already on custom, you have achieved it before right? If not use a video to help.
However if the standard methods do not work then there are sill some tricks..
1. Take out the battery>>>Hold the button combo>>>Insert battery whilst holding combo>>>When the boot screen appears (Samsung GT-I9000) hold for about half a second/whole second then release>>>Wait. If it continues to boot loop again then take out battery
2. From task manager close all Kies apps/processes>>>Put your usb cable in>>>plug in your phone>>>hold the combo>>>Wait.
3.Take out battery>>>Do all of 2>>>When the USB is connected to phone whilst holding the combo insert battery>>>Wait.
4. Repeat 3 with charger instead of the USB cable
If none of that works then yes i think you will need to make or buy the jig. (Or borrow if you can). But also do a search as im not sure if i covered all the tricks. There used to be a thread on it in the general section, try search for it.
charlie2 said:
I dont know which stock firmware to go for a while ago i had same problem as im having now and could not get a decent download for stock firmware any pointers in the right direction ??
Click to expand...
Click to collapse
Sammoblie.com, [Ramad] Stock Firmware or Darky 10.2RE
Sammobile.com is straight forward. Click on smartphone, then android etc. Just follow the clicks then you select the FW that is relevant to you based on country and provider... If use the Ramad link then you will need your csc code which will be retrievable from the sammobile site its at the bottom.
Good luck

guy7685 said:
can you get a Jig from a friend?
it can get you into download mod without button combination..
here is some video that might help to understand how to make one, it has instructions on the info.
also, in xda http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
It says JIG Detected but nothing else ?
Is my phone dead for good ?
Also the link you gave is dead no go ?

Please help im stuck need step by step advice still a real novice ???

charlie2 said:
Hi,
I bought jig from fleabay have inserted and i get yellow triangle in downloading mode (do not turn off target) any advice on what to do next ?
Click to expand...
Click to collapse
Excelent this is exactly what you need to happen
charlie2 said:
Please help im stuck need step by step advice still a real novice ???
Click to expand...
Click to collapse
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset

Lexrsk said:
Excelent this is exactly what you need to happen
1. Ultimate ROM is it ICS? if yes install samsung drivers.exe from the following link http://forum.xda-developers.com/showthread.php?t=961956
2. Download stock ROM for your phone from samfirmware.com or alternatively you can use Darky's ROM
3. you will need Odin to flash the ROM it is included with Darky's ROM as is a read me file with instructions.
4. Start Odin make sure no kies processes are running if installed. If they are running Kill the processes
5. Boot phone to download mode using jig. Remove jig from phone. Plug USB cable into phone. wait for odin to detect phone then flash.
NOTE you may have to Flash once with re-partition ticked and then once without to get the rom completely booted.
Once running it is suggested to perform factory reset
Click to expand...
Click to collapse
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2

charlie2 said:
Hi Mate,
Thankyou for quick reply much appreciated, I am downloading what you put in 1. now for 2. how do i know what is my stock rom ??
Thanks
charlie2
Click to expand...
Click to collapse
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version

Lexrsk said:
Stock ROM would be what the phone was shipped with. ie carrier branded OS etc.
Darky's should work or from Samfirmware.com once registered select firmwares. Type "smartphone" OS "android" model "your model" region "your region"
you should then be left with a selection of firmwares for your handset/region
download the suitable version
Click to expand...
Click to collapse
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2

charlie2 said:
Hi Mate,
I`ve used jig to get into download mode then connected to lappy with odin and it found it it shows as com5......
Now ive also found on samfirmware the original stock rom and have downloaded and its on my laptop as winrar file its this one ( I9000BUJVG_I9000GVODJV5_VOD ) Vodafone uk 2011 i go to extract and i get another win rar file this one called ( JVG_JV5_JV4 ) what next ??
Thanks
charlie2
Click to expand...
Click to collapse
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.

Lexrsk said:
From what you describe I will assume that your computer is running windows 7. This being the case the file downloaded needs to be extracted so that you are left with 1 file called JVG_JV5_JV4
You say that you are now left with file called JVG_JV5_JV4. Have you downloaded a PIT file? If not find 512 PIT at the bottom of this post.
Once PIT file is downloaded extract file.
Select PIT and add pit file
Select PDA and then select the file extracted JVG_JV5_JV4
Then flash.
As stated before you may have to flash with repartition selected once and then once with out.
This should get you going again.
Click to expand...
Click to collapse
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2

charlie2 said:
Hi Mate,
Thanks for reply, I have done what you said and its doing nothing , so i tried seeing what was in JVG_JV5_JV4 file this is whats in there -
boot.bin
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
Sbl.bin
zImage
dont know what to do next lol
I am sorry
cheers
charlie2
Click to expand...
Click to collapse
when you are saying that it is doing nothing is odin flash failing ??
Flash completing and then phone not booting??
If the stock ROM is not working try Darky's 10.2 as it will generally work when other methods fail.

Mate , I can not thank you enough i tried again after i last put message on here and all done i now have 2.3.6 and as far as i am concerned all ok now. I did have to get into recovery mode after i used Odin for mob to start up and just did a system rebbot or should i say factory rebbot. All ok now and alot of songs i had were all still on memory card ok had to re install apps i had before but hey ho.
any advice on battery usage ?
a big big thankyou
Thanks
charlie2

charlie2 said:
any advice on battery usage ?
a big big thankyou
Thanks
charlie2
Click to expand...
Click to collapse
I personally use juice defender. works for me.
If i help just hit the thanks button...

Lexrsk said:
I personally use juice defender. works for me.
If i help just hit the thanks button...
Click to expand...
Click to collapse
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2

charlie2 said:
Have posted Thanks a couple of times very grateful mate if it wasnt for the pit file you posted i would of got no where thought that file would of been with download thats why it didnt work first time.
Mille Grazie
charlie2
Click to expand...
Click to collapse
No problem mate.
Just trying to help where i can

i really need help for my galaxy tab gt - p1000

i'm not an english expert, but i'll try to explain you what happened, and i hope you can help me.
i have a samsung galaxy tab gt - p1000, with an old version of android, 2.3.3, because it's one of the devices wich haven't got the update. but i have bought it about 5 months ago, so i didn't want to waste it. so i decided to put in it the new android version ice cream sandwich, 4.0. and i followed theese instructions:
Requirements and Reminders
To be able to flash the MIUI 4 Alpha ROM on your Samsung Galaxy Tab P1000, you need to satisfy the following requirements:
Root your Samsung Galaxy Tab 7″ and install ClockworkMod Recovery on it.
Fully charge your tablet’s battery.
Back up all important files and data on your device ( i.e. bookmarks, contacts, SMS, APNs, etc.).
Download the MIUI 4 Alpha ROM for the Galaxy Tab from here and save the file to your computer.
The procedure has been tested to work on the Galaxy Tab GT-P1000. It may or may not work on other models.
Use the instructions at your own risk. We shall not be held responsible for any damage to your phone if you follow these instructions.
Installation
Here’s how to install MIUI 4 ICS on your Galaxy Tab 7″:
Connect your tablet to your PC.
Copy the MIUI 4 ROM to your device’s internal storage.
Disconnect your tablet from the PC.
Turn off your tablet.
Reboot the Galaxy Tab into ClockworkMod Recovery by holding down the Volume Up key and the Power button simultaneously.
Once the device has booted into ClockworkMod Recovery, create a backup of your currently working ROM. You can do this from thestyle=”font-style: italic;”>Backup and Restore > Backupmenu. This backup will come in handy in case you want to revert to the original ROM of your device.
From the recovery menu, select “Wipe data/ factory reset” and confirm that you want to perform the action.
Select “Wipe Cache partition” and confirm that you want to perform the action.
Select “Advanced”, then “Wipe Dalvik cache” and confirm that you want to perform the action.
With your phone data completely wiped, you may now install the MIUI 4 ROM. From the recovery menu, select “Install zip from SD card”.
Select “Choose zip from SD card” and choose the ROM file that you have copied to your tablet earlier.
Confirm the installation by choosing “Yes”. The ROM will be flashed after confirmation.
Reboot your device.
Congratulations! You now have Ice Cream Sandwich (via MIUI 4 Alpha) on your Galaxy Tab P1000.
but at point 8 or 9, (i don't remember, but i think it isn't too much important) i had to stop, because i stucked. so i reboot the device, and i've formatted it. the device worked like always, and so i decided to download rom manager from the market. when i launched the application i saw that i could flash the system that i had put in the device directly from there. so i touched that option and i followed the first instructions. i flash the system as the rom mangaer app told me. but when the device reboot for installing, and doing it's thing (i'm not a computer and technology expert to D: ) it stopped at the first screen, ( the one that says "galaxy tab, samsung"), and it didn't go ahead. so i reboot in recovery mode switching off the device and rebooting it pulling the volume up button + the power button, but it doesn't worked. so i tried to reboot it pulling volum down button + power button and appeared a yellow triangle with the android man and the written: downloading do not turn off target
but it stucked there like the first screen. i waited that the device discharged, and i charged it another time, but when i charge it, it appear on the screen the battery icon, but it is blocked. and now i can't open it, and it doesn't work or answer at all.
i know that it's possible that i made mistakes following the instructions, or the instructions doesn't worked.... but now, how can i reboot or format my device.
i only need to reuse, the information or the documents in it are not important.
if you can, help me, thanks

Read my post here. Should be same way.
http://forum.xda-developers.com/showthread.php?t=1626825
You can stop right after flashing gb-stock-safe-v5
But you would probably want to go all the way and try overcome from.
Sent from my GT-P1000 using XDA

If you are getting the download screen then flash it with stock firmware.You can download from samfirmware.com for gt P1000, Android 2.3.6 is available. Just use Odin and flash. You can get a working tab.
Sent from my GT-P1000 using xda premium

Hey guy, I can't give you all links now...but I will help you! I think I can
Excuse my spelling too, I am Russian and English is not my native language.
Watch the team overcome.net website for restock bundle and overcome kernel.
There are some modems,from,Odin in the bundle. I am not very good in English,please read some instructions on flashing roms by Odin, I can't fully explain...
You just connect your tab to Odin via download mode and flash restock. And then you flash kernel. OK, you have a clean 2.3 rom, but I really want you to go to CyanogenMod download center and download the latest nightly build. (OK, I don't know how to access it I just go to Devices page, choose any phone, select NIGHTLY BUILDS link and search for p1 in the list and download the nightly and flash it.
Something you can find or can't.
After flashing kernel for restock go to recovery and do wipe user data/factory reset and wipe cache. The system will startup then. Without this you'll get an infinite boot.
The overcome kernel will convert your file system. Please wait for it when your tab is charged and is booting. A robogirl will talk to you then
After flashing CM wipe it too!
Download GApps on goo.im to have Market and other Google apps! (Flashing via recovery)
I think that is all. If you have problems,send me a message, I'll try to help! Good luck!

you have to return to stable xxjq1 gingerbread. you have a soft brick. follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1133590
then flash chainfire's cwm
after that, follow this thread:
http://forum.xda-developers.com/showthread.php?t=1523174
Please thank me if you found it useful

ok, but i can't download the right firmware from sammobile.com
can someone explain me how to download the right firmware from the site, and how to choose the correct one? thanks

Go to www.samfirmware.com and select the firmware you want to download.
Sent from my GT-P1000 using xda premium

You have indeed sofbricked your tab.
Google for "Overcome guide for galaxy tab 7" (can't post any links yet)
There you can find a direct link for the file "GB-stock-safe_v5.zip".
This contains the needed firmware and Odin tool to flash it.
Follow the soft brick guide given by gogol1996 with the content of the zipfile and you're back in business.

B.V. said:
You have indeed sofbricked your tab.
Google for "Overcome guide for galaxy tab 7" (can't post any links yet)
There you can find a direct link for the file "GB-stock-safe_v5.zip".
This contains the needed firmware and Odin tool to flash it.
Follow the soft brick guide given by gogol1996 with the content of the zipfile and you're back in business.
Click to expand...
Click to collapse
No such thing as a "soft brick". It just a term that newbies like to throw about for any occasion they haven't flashed device correctly and dont know how to use download mode or recovery to get their OS back up and running.
Your device is either "bricked" or it isnt. If you can use download or recovery, it isnt.

Here we go again.
What about if you can get to download mode but the internal flash is stuffed?
A few guys here got that. Not a brick?
Sent from my GT-P1000 using XDA

priyana said:
Here we go again.
What about if you can get to download mode but the internal flash is stuffed?
A few guys here got that. Not a brick?
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
Ok sorry, edited. If you can "use" download/recovery its not bricked.
99.9% of times the term "soft brick" is used though its simply that the user doesn't know how to use download mode and they have screwed up rom flash/kernel, get no boot or just boot loop etc and cant use recovery.

I like your original definition else where that says it is not bricked as long as you can flash it.
But that is obvious.
Sent from my GT-P1000 using XDA

Thanks to all of you, i have fixed my device. now it goes in recovery mode and in downloading mode. i guess i have only to put a new version of android on it and i'm cool

Depending on your luck.
Some people can go to download mode but flash keep failing due to damaged internal SD.
You can read about here somewhere.
Good luck.
Sent from my GT-P1000 using XDA

priyana said:
Depending on your luck.
Some people can go to download mode but flash keep failing due to damaged internal SD.
You can read about here somewhere.
Good luck.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
That usually only happens though when you are flashing via USB and you lose power or pull cable early etc, ie pull handbrake when flooring it

so there is a possible brick even if you have download/recovery mode.. another new thing I learn daily.

slyv3 said:
so there is a possible brick even if you have download/recovery mode.. another new thing I learn daily.
Click to expand...
Click to collapse
to hard brick your tab, ie to make it useles, you have to delete the bootloader files (boot.bin & sbl.bin) from the .tar package before flashing

hard brick sure for me i need some help
i try to flash the stock rom N7000 on my galaxy tab and i forget to read the post that prevent not to do that i now mt tab have a black screen it's an hard brick no respons with odin so how can i do to pass the probleme of the boot loop or boot trap help me. thk

bring it to a shop for JTAG.
Or maybe you can try the Unbrickable Mod
http://forum.xda-developers.com/showthread.php?t=1312391
not sure if that can help.
And by saying your "galaxy tab" you mean you have a P1000, right?

slyv3 said:
so there is a possible brick even if you have download/recovery mode.. another new thing I learn daily.
Click to expand...
Click to collapse
reinstall driver kies.. plug your usb cable.. open odin.. flash.. and you're done!

My Note updated with XXLPY now no google service or play store :S

I have update my Samsung Galaxy note n7000 from GB to ICS from phone not from KIES but right after update i can't access play store or any google services. I have factory restore my phone from both the option and 3 buttons restore from recovery. Now when i try to add google account its says can't establish network connection. I have tried to add account from Youtube but no success.
My current version is ICS 4.0.3
PDA:N7000xxlpy
Phone: N7000xxlpt
Csc: n7000oxxlp5
I am unable to log inn any of the account like facebook, youtube or chat, Even if i download the .apk from any other source its downloaded but its does not fetch download the from Internet.
I have checked the phone on many different router there is no problem in wifi connectivity.
While searching on google XXLPY is the culprit here and its the bad update which i got from the OTA now what to do next, i have reset my phone two or three time but all in vain or may be i am lucky that i don't get my device bricked

Dont reset while u r in ICS,for google account try to us ur data connection not ur wifi for adding account, it may work..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

HALT!
You're on ICS - Stop messing about with Factory Resets / Recovery etc..
Downgrade to Stock GB via ODIN - Do your wipes - Make sure it's working in GB - Update to ICS / Flash a Stock ICS in ODIN..

Mobile network is not working too, can any one tell me how to downgrade it or is it safe to flash it with another kernel ??

Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app

CJSlim79 said:
Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply all these Emmc error is going over my head my phone is in warranty should i gave it for warranty claim or try to reflash it with another stock ICS rom ??

Take time. Read through this. Read through this again. Thus will teach you how to reflash safely using odin.
http://forum.xda-developers.com/showthread.php?t=1801341

Have you used Odin before ?

numbnutsuk said:
Have you used Odin before ?
Click to expand...
Click to collapse
yes many time i have used it on my Galaxy Ace but that was low end phone and i don't want to mess with this phone. Its all just because of OTA update from Samsung
My question is that should i have to flashed it with Gb first if yes then which region is safe to flash it with.
P.S i have ask a friend who has flashed it from ICS to ICS of different firmware by using abssyynote kernel :S

This is what my friend told me to do is it safe ?? or can be done in this way ??
i dont need to tell you that you have to be very careful in following these steps,
although i have tried them 5 times on 5 different notes successfully still mistakes can be dangerous so be careful and follow them to the letter and take your time to read before you start
also if you can do this with a laptop its better than a pc because if the electricity cut out it could mess up the phone. its safer to have a battery, btw just as i finished this line we had a black out here lol electricity cut off for the whole block
copy AbyssNotekernel42.zip and CWM.zip to the phone
power off the phone and take the battery out to make sure its off
power it back on holding volume up + home + power to go to recovery mode
choose install zip from sdcard
select the CWM.zip and choose yes install
you will get clock work mode interface then choose install update zip from sdcard again
select AbyssNotekernel42.zip and install it
power off and remove the battery and put it back
power on holding volume up + home + power to go to recovery mode again
this time it the abyss kernel recovery and it works with the touch screen
it is safe to do a factory reset from here so do it
then power off and remove the battery again and put it in
this time power on the phone with volume down + home + power to go to download mode
start Odin on the pc then connect the phone in download mode
click on PDA and then select the rom XXLPD file "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5" and click start
when the phone restarts make sure the samsung logo apears then remove the battery so that it doesnt boot up
start the phone again in download mode volume down + home + power
select the speedmod kernel file and flash it to the phone same way you flashed the rom in PDA select "speedmod-kernel-n7000-ics-k3-11-Odin.tar" then click start
when the phone restarts again remove the battery after the samsung logo apears
power on the phone into recovery again for the last factory reset volume up + home + power
do the factory reset and reboot the phone

There are a few steps missing there. I would go to the link I posted above.
First download Odin 1.85 from link A. 1

Next download pre rooted GB from A.8 and flash it using Odin under pda

Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?

numbnutsuk said:
Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?
Click to expand...
Click to collapse
Thank you very much i will try that

Ask if u need any further help. Let me know how you get on

numbnutsuk said:
Next download pre rooted GB from A.8 and flash it using Odin under pda
Click to expand...
Click to collapse
Can you tell me what do you meant by A.8 in GB :S

OK got it what does A.8 means thanks once again

section A number 8

Then you'll find the ics rom from section B useful guides 1 stock ics roms

can you tell me from where i have to get a PDA file for GB rom ??