Database Develop

[Q] Messed it up and need help

This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.

Do not flash thru CWM... Flash a good GB kernel like "franco.Kernel" but thru PC Odin then u can flash whatever u want from franco's CWM... Good luck

Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.

Ce said:
Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.
Click to expand...
Click to collapse
Flat battery? It's also possible that it's just the screen that's not working. Try entering download mode "blind". So hold power+home+vol down for ~10 seconds, then press vol up. Hook it up via usb and see if Odin can recognize it.

Thanks, didn't think of that. But unfortunately no response from the device.

So now that it looks like your phone is officially bricked, I think you should just take it to Samsung and make up a story. Like you were updating your software with Kies and something happened and the phone is just not booting up.
I am sorry you bricked your note though..

try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose

musashiro said:
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
Click to expand...
Click to collapse
I would like to but it's very hard when you can't see anything on the screen...

Maybe it's just the battery, try to charge it externally and try a JIG also
Sent from my GT-N7000 using XDA

Just a quick, final, update.
My Note was superbricked. Had to send it to a Samsung Service Center. No additional questions were asked. Samsung replaced the mainboard. Didn't have to pay anything.
Great service!!!

try this out buddy, do it on your own risk!!! anyways you have messed it up.
Ce said:
This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.
Click to expand...
Click to collapse
i was not a member when i commited this mistake. but then big thanks to this community it helped me back from softbrick.
first you do is install a stock kernel of ics on your note go into recovery and just clear cache partition, thats it no wipe/data factory reset.
then,
install the pit file from this thread, also read it completely before proceeding. http://forum.xda-developers.com/show....php?t=1667886 , hoping yours is 16gb version and also read this thread for additional info but its quite complicated for me so im just telling you the direct method and hopefully itll get your note back to work. so once you download the 16gb pit file unzip it and in the unzip folder you will find a separately lying pit of 16gb stating patched-standard thats the one you want.
then,
goto samfirmware and download the latest ics firmware(i downloaded the indian one as it is in file .tar),
unzip it till you get .tar file.
open odin- click pit-select 16gb patched standard pit- check wether repartion is ticked- click pda-select the .tar file you extracted connect your phone and start. this time i wont stop at factory.fs.....
NOTE THAT AFTER THIS PROCEDURE IS COMPLETED SUCCESSFULLY YOUR INTERNAL STORAGE WOULD BE ONLY 8GB INSTEAD OF 11 GB STOCK WHICH YOU WERE GETTING.
I REVIVED MY NOTE THROUGH THIS PROCEDURE. PROCEES AT YOUR OWN RISK.
one your phone is working you'll be able to reset the counter with a jig and get your phone under warranty and get your motherboard changed by teliing at the Samsung Service that you are getting only 8gb instead of 11gb you used to get earlier(warranty only if you had any).
hope this helps mate.
BEST OF LUCK!!
A BIG HUGE THANKS TO hg42.....

My Note updated with XXLPY now no google service or play store :S

I have update my Samsung Galaxy note n7000 from GB to ICS from phone not from KIES but right after update i can't access play store or any google services. I have factory restore my phone from both the option and 3 buttons restore from recovery. Now when i try to add google account its says can't establish network connection. I have tried to add account from Youtube but no success.
My current version is ICS 4.0.3
PDA:N7000xxlpy
Phone: N7000xxlpt
Csc: n7000oxxlp5
I am unable to log inn any of the account like facebook, youtube or chat, Even if i download the .apk from any other source its downloaded but its does not fetch download the from Internet.
I have checked the phone on many different router there is no problem in wifi connectivity.
While searching on google XXLPY is the culprit here and its the bad update which i got from the OTA now what to do next, i have reset my phone two or three time but all in vain or may be i am lucky that i don't get my device bricked

Dont reset while u r in ICS,for google account try to us ur data connection not ur wifi for adding account, it may work..
↖(^▽^)↗ Sent from Rego Galaxy Note ↖(^▽^)↗

HALT!
You're on ICS - Stop messing about with Factory Resets / Recovery etc..
Downgrade to Stock GB via ODIN - Do your wipes - Make sure it's working in GB - Update to ICS / Flash a Stock ICS in ODIN..

Mobile network is not working too, can any one tell me how to downgrade it or is it safe to flash it with another kernel ??

Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app

CJSlim79 said:
Goto the stock ROM thread and follow Dr. K'S instructions... It's all there, if you need any further help let me know...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply all these Emmc error is going over my head my phone is in warranty should i gave it for warranty claim or try to reflash it with another stock ICS rom ??

Take time. Read through this. Read through this again. Thus will teach you how to reflash safely using odin.
http://forum.xda-developers.com/showthread.php?t=1801341

Have you used Odin before ?

numbnutsuk said:
Have you used Odin before ?
Click to expand...
Click to collapse
yes many time i have used it on my Galaxy Ace but that was low end phone and i don't want to mess with this phone. Its all just because of OTA update from Samsung
My question is that should i have to flashed it with Gb first if yes then which region is safe to flash it with.
P.S i have ask a friend who has flashed it from ICS to ICS of different firmware by using abssyynote kernel :S

This is what my friend told me to do is it safe ?? or can be done in this way ??
i dont need to tell you that you have to be very careful in following these steps,
although i have tried them 5 times on 5 different notes successfully still mistakes can be dangerous so be careful and follow them to the letter and take your time to read before you start
also if you can do this with a laptop its better than a pc because if the electricity cut out it could mess up the phone. its safer to have a battery, btw just as i finished this line we had a black out here lol electricity cut off for the whole block
copy AbyssNotekernel42.zip and CWM.zip to the phone
power off the phone and take the battery out to make sure its off
power it back on holding volume up + home + power to go to recovery mode
choose install zip from sdcard
select the CWM.zip and choose yes install
you will get clock work mode interface then choose install update zip from sdcard again
select AbyssNotekernel42.zip and install it
power off and remove the battery and put it back
power on holding volume up + home + power to go to recovery mode again
this time it the abyss kernel recovery and it works with the touch screen
it is safe to do a factory reset from here so do it
then power off and remove the battery again and put it in
this time power on the phone with volume down + home + power to go to download mode
start Odin on the pc then connect the phone in download mode
click on PDA and then select the rom XXLPD file "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar.md5" and click start
when the phone restarts make sure the samsung logo apears then remove the battery so that it doesnt boot up
start the phone again in download mode volume down + home + power
select the speedmod kernel file and flash it to the phone same way you flashed the rom in PDA select "speedmod-kernel-n7000-ics-k3-11-Odin.tar" then click start
when the phone restarts again remove the battery after the samsung logo apears
power on the phone into recovery again for the last factory reset volume up + home + power
do the factory reset and reboot the phone

There are a few steps missing there. I would go to the link I posted above.
First download Odin 1.85 from link A. 1

Next download pre rooted GB from A.8 and flash it using Odin under pda

Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?

numbnutsuk said:
Then down load lpy open German 4.0.3 which you want from B.1 and flash in PDA using Odin.
That's it your done!
You comfortable with that?
Click to expand...
Click to collapse
Thank you very much i will try that

Ask if u need any further help. Let me know how you get on

numbnutsuk said:
Next download pre rooted GB from A.8 and flash it using Odin under pda
Click to expand...
Click to collapse
Can you tell me what do you meant by A.8 in GB :S

OK got it what does A.8 means thanks once again

section A number 8

Then you'll find the ics rom from section B useful guides 1 stock ics roms

can you tell me from where i have to get a PDA file for GB rom ??

[Q] After rooting phone is not starting, please help...

Hi,
I have Samsung Galaxy S I9000 running Ginger Bread.
I wanted to upgrade my phone to Ice Cream Sandwitch or Jelly Beans. In order to do it, I started with below steps to root my mobile.
1. Installed latest Clockwise Mode application into my phone.
2. Installed Odin3 v1.7 in my laptop.
3. Downloaded CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar on my laptop.
4. Started Odin first.
5. Disconnected mobile and started in download mode with Volume Down + Home Button + Power Key.
5. After starting the download mode, connected mobile to laptop using the USB.
6. Keep all the default values in Odin3 i.e. Re-Partition option unchecked, Auto Reboot and F-Reset Time option enabled. Selected tar file CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar in PDA option.
7. Connected mobile and it detected ID Comm [Highlighted in Yellow].
8. Finally click on Start button.
After starting the process was completed and Yellow color changed to Green one, phone was auto reboot.
But after reboot it is just stuck on start of screen and not going ahead. I wait for 2 hours but still not working.
Could you please help me how I can solve this issue now?

Did you try to pull battery out and restart the phone again?
Do you still can go in CWM with 3 button combo again?
If yes then try to flash a ICS or JB kernel (depending on what ROM you finally want to have on your phone) via CWM and then go in advanced and restart recovery (if available), otherwise just try to flash the rom.zip on top.
If CWM is not possible, the go in download mode an falsh a tar version of kernel via ODIN.
Here are different semaphore kernels for each android version:
http://78.46.194.137/downloads/gt-i9000-ics
http://www.semaphore.gr/downloads/gt-i9000-jb
For ics it should work after 1. flash, but for JB you have to flash it 2 or even 3 times, if after restart phone does not boot. Then battery out again, start in recovery and flash zip again.
Good luck and good success .

I think, at this position, installing a new gingerbread stock ROM will be preferable. Try installing XXJVU. Then root with cwm and install any slim bean version in case you are interested to use jelly bean.
Sent from my GT-I9000 using xda app-developers app

Sure that will be the best way....but my suggestions do not take much time, so why not give them a try .
But if its not going, then a restock is the best you are right:
What I always do for restock is using slappys rescue kit.
Unzip it and flash the Rom via Odin. There is everything, also a txt file with a guide included.
http://forum.xda-developers.com/showpost.php?p=29114573&postcount=2
If you want to have slim rom then its recommended to flash CM9 first or flash a modem afterwards via cvm, because slim does not have a modem included.
And/Or just follow the installation guides/recommendations from the single ROM Threads.

Thanks Guys for your help.
My issue is resolved with below post.
http://forum.xda-developers.com/showthread.php?t=1809098

phone not starting
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i

viral1999 said:
guys i cant start my phone....even the three buttons ar not working...it is just loading and loading....help please
model-gt-s5830i
Click to expand...
Click to collapse
You are here in totally wrong section: this is a i9000 help thread section. Hopefully you didn't flash a i9000 rom, otherwise your phone is hard bricked.
tetakpatalked from Nexus 7 flo

Me 2: It was from low battery in my case
I had similar problem when rooting my Samsung Galaxy S5 smartphone with Odin3. After rooting with a success message my phone was showing just the Samsung Logo each time I was trying to turn it on without loading OS. I googled and directed here and connected my phone to the charger as its mentioned in a link you provided which solved your problem. It turned on automatically after a few minutes while of charging and when turned on it was charged approximately 40%.
As I was very afraid my phone got serious harm at first I hope this maybe a sedative probability for duds really worry about what happened to their smartphone.

I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again

Imbhavya said:
I rooted my phone le tv without pc bt after rooting it is not starting pls help me how to start my mobile again
Click to expand...
Click to collapse
What exactly did you do, which phone model and what does it display now?
Sent from my A0001 using Tapatalk

[Q] stable custom rom for mini2?

Hi everybody,
sorry for posting this outside the mini 2 forum, but appearently that's a developers reserved forum, so I had no rights to post there.
I would like to ask what is the latest stable custom rom developed for mini2, where to find it and possibly an instruction page.
I had good experience with CM on another galaxy before, so I checked on the the CM website first but mini 2 is not listed there
On the other end I saw a long post on the mini2 developers forum saying that CM10 was actually created, but the post is 91 pages long(!), so forgive me if I didn't read it all. Is it working?
I also checked if there was something like an "in evidence" post with instructions for newbies but couldn't see any, maybe I missed it.
Can someone point me to the right page?
thank you for your held
davide

mm in the meantime I screwed things up. I installed gapps and now it only boots in recovery mode...
why? what shall I do?
please help
thank you
davide

ok, now I'm starting to panic.
why does nobody answer, am I doing something wrong with this post?
I reinstalled the stock rom. I first tried using CWM recovery and selecting install zip file from sd card, but it didn't work: it told me BAD regarding the zip file (downloaded from sammobile), then I succeded using odin. by the way which is the correct method?
However it now seems to start, but I get in loops messages from the setupwizard that says the guided configuration has crashed and also from gapps that Google service Framework has crashed (but should gapps be wiped by the rom flash???).
the problem is that the first of the two keeps restarting and crashing so the phone doesn't do anything else then showing this messages.
please help
davide

After you flash Stock ROM via Odin. Remove battery, put it back. Boot into stock recovery - clear user data & cache and reboot. If the same error occurs try deleting /Android directory(old cache) in your sd card.

thank you for your reply, unfortunately it didn't help.
what do you mean by "stock recovery"? the recovery I see, I believe is CWM which I installed before, but I'm not sure.
anyhow from there I wiped user&cache but I had tried this before and removing teh battery didn't make a difference.
I do not have any /Android directory on my SD card.
it's a simple 4GB fat 32 partition with a single file in it (the zip with stock rom I tried to flash before using odin) and nothing else.

by the way, I used odin3 v.1.83 to flash and I selected the file using PDA button,
but I also have "bootloader", "phone" and "csc" options.
what is the difference?

everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!

yukdav said:
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
Click to expand...
Click to collapse
you should terminate kies before using odin. You can kill it in task manager, because kies intereferes with ODIN.
You should'nt be concerned with bootloader and the other options. As long as ur downloaded stock has tar.md5 extension you just place it in the PDA section and select Auto reboot and F. Reset time only.
Also You should only disconnect when it says PASS otherwise u will brick ur phone.
When u success fully flash ur stock rom, the chance is it will not get to homescreen
So u remove battery, reinsert it, press and hold HOME button together with POWER button, the phone boots into stock recovery, you choose wipe data and cache, then reboot. (chemicalrage explained this)
If it ain't booting into download mode u should go to service centre.
PS: My advice is to stay away from custom roms until samsung releases jelly bean for mini 2, then better custom roms will be released.

status 7 error

hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~

Install newer CWM.. you have to ask this in the special thread made for it

broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to

Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.

mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.

Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001

mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?

There are more buttons to use. If i can remember you need to use the menu button

mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?

Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.

mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..

Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off

Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app

mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;

hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!

1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)

mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location

shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)

educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..

Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop