Hi everybody,
sorry for posting this outside the mini 2 forum, but appearently that's a developers reserved forum, so I had no rights to post there.
I would like to ask what is the latest stable custom rom developed for mini2, where to find it and possibly an instruction page.
I had good experience with CM on another galaxy before, so I checked on the the CM website first but mini 2 is not listed there
On the other end I saw a long post on the mini2 developers forum saying that CM10 was actually created, but the post is 91 pages long(!), so forgive me if I didn't read it all. Is it working?
I also checked if there was something like an "in evidence" post with instructions for newbies but couldn't see any, maybe I missed it.
Can someone point me to the right page?
thank you for your held
davide
mm in the meantime I screwed things up. I installed gapps and now it only boots in recovery mode...
why? what shall I do?
please help
thank you
davide
ok, now I'm starting to panic.
why does nobody answer, am I doing something wrong with this post?
I reinstalled the stock rom. I first tried using CWM recovery and selecting install zip file from sd card, but it didn't work: it told me BAD regarding the zip file (downloaded from sammobile), then I succeded using odin. by the way which is the correct method?
However it now seems to start, but I get in loops messages from the setupwizard that says the guided configuration has crashed and also from gapps that Google service Framework has crashed (but should gapps be wiped by the rom flash???).
the problem is that the first of the two keeps restarting and crashing so the phone doesn't do anything else then showing this messages.
please help
davide
After you flash Stock ROM via Odin. Remove battery, put it back. Boot into stock recovery - clear user data & cache and reboot. If the same error occurs try deleting /Android directory(old cache) in your sd card.
thank you for your reply, unfortunately it didn't help.
what do you mean by "stock recovery"? the recovery I see, I believe is CWM which I installed before, but I'm not sure.
anyhow from there I wiped user&cache but I had tried this before and removing teh battery didn't make a difference.
I do not have any /Android directory on my SD card.
it's a simple 4GB fat 32 partition with a single file in it (the zip with stock rom I tried to flash before using odin) and nothing else.
by the way, I used odin3 v.1.83 to flash and I selected the file using PDA button,
but I also have "bootloader", "phone" and "csc" options.
what is the difference?
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
yukdav said:
everything I do makes it more dramatic!
I tried reapeating the whole procedure once again, and odin crashed while flashing teh rom. now it doesn't even boot in download mode, it simply asys to connect kies in recovery mode. but kies never saw my phone in spite of driveres reinstallation, and it is of course not seeing it now!!
Click to expand...
Click to collapse
you should terminate kies before using odin. You can kill it in task manager, because kies intereferes with ODIN.
You should'nt be concerned with bootloader and the other options. As long as ur downloaded stock has tar.md5 extension you just place it in the PDA section and select Auto reboot and F. Reset time only.
Also You should only disconnect when it says PASS otherwise u will brick ur phone.
When u success fully flash ur stock rom, the chance is it will not get to homescreen
So u remove battery, reinsert it, press and hold HOME button together with POWER button, the phone boots into stock recovery, you choose wipe data and cache, then reboot. (chemicalrage explained this)
If it ain't booting into download mode u should go to service centre.
PS: My advice is to stay away from custom roms until samsung releases jelly bean for mini 2, then better custom roms will be released.
Related
This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.
Do not flash thru CWM... Flash a good GB kernel like "franco.Kernel" but thru PC Odin then u can flash whatever u want from franco's CWM... Good luck
Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.
Ce said:
Don't need help anymore
Note is officially bricked. After several attempts to recover from a softbrick the screen of my Note didn't turn on anymore. No button or button combination works, no recovery and no download mode, just a black screen.
Click to expand...
Click to collapse
Flat battery? It's also possible that it's just the screen that's not working. Try entering download mode "blind". So hold power+home+vol down for ~10 seconds, then press vol up. Hook it up via usb and see if Odin can recognize it.
Thanks, didn't think of that. But unfortunately no response from the device.
So now that it looks like your phone is officially bricked, I think you should just take it to Samsung and make up a story. Like you were updating your software with Kies and something happened and the phone is just not booting up.
I am sorry you bricked your note though..
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
musashiro said:
try AMORA Filemanager.. flash via recovery and you have a file manager,,, take a look on your partitions
just my idea, you got nothing to lose
Click to expand...
Click to collapse
I would like to but it's very hard when you can't see anything on the screen...
Maybe it's just the battery, try to charge it externally and try a JIG also
Sent from my GT-N7000 using XDA
Just a quick, final, update.
My Note was superbricked. Had to send it to a Samsung Service Center. No additional questions were asked. Samsung replaced the mainboard. Didn't have to pay anything.
Great service!!!
try this out buddy, do it on your own risk!!! anyways you have messed it up.
Ce said:
This WAS the situation before the problems:
Rooted Gingerbread rom, all working fine. Decided to unroot and install the full version of the official German ICS rom by using PC Odin. All went fine and used my Note for over two days. Because of the lags en slow responses I decided to reflash the ICS rom. From that moment on I messed it up. I've been reading and searching hundreds of posts for almost a day but didn't find a solution.
This IS the current situation:
I can get into download mode
I can get in recovery mode
However, in recovery mode I can not install a rom, every flash (CWM, both ICS and GB - even using chainfire's rom needed for rooting) stops on a random moment...but never gets it to the end, even if I wait several hours. Installing is very...very....very slow.
In recovery mode i can not restore a Nandroid backup, both ICS and GB. Every backup stops when /system has te be installed. errormessage.
In download mode I can connect my Note to PC Odin. I can select a rom and start flashing. However, after appr. 80% installation halts during "nand write start", no error message. The flashing does not finish, even after hours.
Funny is, i can install a kernel like Abyss.
So, I can't restore, i can't flash using cwm in recovery and I can't flash using PC Odin. My device seems not fully bricked. The max I get when rebooting (knowing that the process has not finished) is the triangle screen.
Any advise is appreciated.
Click to expand...
Click to collapse
i was not a member when i commited this mistake. but then big thanks to this community it helped me back from softbrick.
first you do is install a stock kernel of ics on your note go into recovery and just clear cache partition, thats it no wipe/data factory reset.
then,
install the pit file from this thread, also read it completely before proceeding. http://forum.xda-developers.com/show....php?t=1667886 , hoping yours is 16gb version and also read this thread for additional info but its quite complicated for me so im just telling you the direct method and hopefully itll get your note back to work. so once you download the 16gb pit file unzip it and in the unzip folder you will find a separately lying pit of 16gb stating patched-standard thats the one you want.
then,
goto samfirmware and download the latest ics firmware(i downloaded the indian one as it is in file .tar),
unzip it till you get .tar file.
open odin- click pit-select 16gb patched standard pit- check wether repartion is ticked- click pda-select the .tar file you extracted connect your phone and start. this time i wont stop at factory.fs.....
NOTE THAT AFTER THIS PROCEDURE IS COMPLETED SUCCESSFULLY YOUR INTERNAL STORAGE WOULD BE ONLY 8GB INSTEAD OF 11 GB STOCK WHICH YOU WERE GETTING.
I REVIVED MY NOTE THROUGH THIS PROCEDURE. PROCEES AT YOUR OWN RISK.
one your phone is working you'll be able to reset the counter with a jig and get your phone under warranty and get your motherboard changed by teliing at the Samsung Service that you are getting only 8gb instead of 11gb you used to get earlier(warranty only if you had any).
hope this helps mate.
BEST OF LUCK!!
A BIG HUGE THANKS TO hg42.....
Hi I hope someone can help me as i'm a little stuck how to proceed....
Basically I purchased a new P7310 tablet 2 days ago with the idea of installing lovely JellyBean.
I firstly 'Rooted' the following the instructions on http://forum.xda-developers.com/showthread.php?t=1406137 and then installed and run 'Superuser' without problems.
Next I installed 'Titanium Backup Root' and 'RomManager from ClockWorkMod', I run Titanium Backup Root and carried out a full system and apps backup successfully.
Next I connected my tablet to my Windows PC and downloaded the latest two ROM zip files from http://forum.xda-developers.com/showthread.php?t=1777398 and copied them to the Root of my SDcard.
I then disconnected my tablet and clicked the 'RomManager' app, once opened I clicked on the 'Boot in Recovery' button and a message appeared saying it needs to install the Recovery Manager, so I clicked OK. Next a success message appear saying it installed OK. So I decided to click the 'Backup ROM' button before I started just to be safe but the tablet switched off... black screen, it then loaded up but the Samsung logo flash up then disappeared.
Now If I try to power on the tablet I just get to the logo then powers off, if I try to boot into recovery mode it displays the two icons on the screen ok but selecting the left icon (with mini android character) it powers off. If I select the other green icon it shows me a message about installing custom roms and asks me to connect the tablet to a USB... followed by asking about 'odin3'?
I'm totally confused what I can do now, as I say I haven't actually got to the point of installing the JelyBean Rom, I just wanted to make a few backups first.
Any help much appreciated..thanks.
From further investigation I think I have soft bricked my tab :crying:
Now trying to find out how I might be able to fix it, found this post which I really hope will help me - http://forum.xda-developers.com/showthread.php?t=1133590
Any help with trying to fix my tab would be great.. thanks.
Fixed it thanks to this forum :victory:
Encase anyone else has the same issue I just downloaded the original ROM file for my UK P7310 (P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5) which was approx 600MB (once extracted to desktop) from http://forum.xda-developers.com/showthread.php?t=1582943
And followed the screen shot instructions further down the thread from user 'suwandiapr' which informed me which options to have selected when runing the 'Odind3 v1.85' application.
The whole process took around 10 minutes to complete.
Sounds like ROM Manager screwed you. This is why I'm not a big fan of these Play Store release ROM/recovery installers. You can't test on every device, therefore there are going to be issues and some people are going to end up with bricks. Sure, they're convenient, and they work most of the time, but when they don't work, it has the potential to be catastrophic.
IMO, stick with flashing things through working recovery (or Odin the first time).
EDIT: Also, glad you're back up and running.
had same problem with p7300 after Rom Manager.
now using cwm for total backups and 'my backup' for applications when moving between different roms.
I'll second everything said. Always use a recovery to flash a rom. Never rom manager or other such things i hard bricked my i727 using goo manager. Don't trust the rom either rom manager or goo manager say are compatible with you device. Pretty sure my hard brick was from a gapps goo manager said was compatible with the rom. Check xda and what others have said works
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
The best option to flash any rom is from the cwm recovery, unless its a stock rom and u want to use Odin from dl mode. Also, some versions of cwm recovery are deemed dangerous for ics. Pls visit tracids thread in development for details.
Hi!
I just recieved a Galaxy S and i have a problem.
At the beggining, the phone bootloops. Then I full wipe it, so now doesn't have that problem. Now the problem is, that when it loaded and show the start settings (select lang, date, time etc.) every single application on the phone "Force Close" and the phone reboot itself and repeat the same procedure. I don't know what kernel, ROM the phone use, but i think it is the stock one (2.3.4 or 2.3.6)
I am able to go to Download Mode, but when I do that, the phone can't connect with ODIN, also my computer doesn't recognize my phone when i am in Download Mode (when i try to turn on the phone, then my computer recognize: Samsung Android USB ...)
I also tryed to change the ROM via recovery, but there i've got very few options (reboot, apply updates, wipe data, wipe cache), so i'm not able to change the ROM from there.
Please, tell me what to do.
Edit: Sorry for my bad english
I'm pretty sure you only installed the wrong USB drivers. There should be some sort of tutorial on the web to get the right drivers for an Odin access. Anyways, be sure that KIES and all child processes are killed when using Odin (use the task manager to look that up).
Feel free to ask further questions
Sent from my Gameboy Color
http://db.tt/BujOFVxz
Hey! Thanks for the drivers above. The funniest thing is that the computers in my school recognized my phone, so do ODIN. But my computer still not recognized the device. Tonight i will send files to my flashdrive so tomorrow i will flash ROM with ODIN in my school (i have an admin account ) When i get back from school, i'll post the results here.
[sorry for my bad english, again]
Hi, again! Today I messed everything up. First, i flashed with ODIN the Darky's ROM but after installation 20 minutes the phone freezed at the logo (no progress there). Then I flashed CWM with ODIN and tried to install CM10 without success. After the installation the only thing which was changed was the CWM (new version 6.x.x.x). Then I tried to flash new kernel (Semaphore_JB_2.5.0s) and now its freezes at the logo "SEMAPHORE". I dont have recovery anymore, only the Download Mode.
Please, give me a link with the steps or show me how to install new ROM property, because this is the 3rd day i'm trying to start the phone with new ROM. Kies don't help, because "USB Debugging" is not activated on my phone (i can't activate it, because of the problem).
Thanks.
cm9 with odin
for cm9 with odin check this link: http://forum.xda-developers.com/showthread.php?t=1419102
Flashing shouldn't take more than a few minutes. CM9 was stable for me - with cm10 I still have a few problems.
start from stock rom
I think you should flash stock rom first.
flash GB firmware 2.3.6 (recommend JVU).
flash CF-root for jvu.
you can find stock firmware easily here as well.as instructions.
make sure play around with your phone for a while after done. then go ahead to any custom rom.
hello i've been trying 2 get a new rom for my brother's SGS+
but almost every rom i try (mostly jelly bean and ics roms but also some gb ones) give me n error
when i try 2 install them through recovery mode,
i get error status 7, installation aborted
now i looked for this problem on the internet and it appears there r some solutions found on this link:
http://www.knowtechbetter.com/how-t...ry-cwm-while-installing-flashing-custom-roms/
however i did not understand any of this
i m not new in installing roms and such but i m not very femilier with all these "more complicated" things
i noticed at the comments that the first solution helped someone
and it looks easy, if any1 could explain me shortly how do i do this this would be very helpful.
thanks~
Install newer CWM.. you have to ask this in the special thread made for it
broodplank1337 said:
Install newer CWM.. you have to ask this in the special thread made for it
Click to expand...
Click to collapse
i have faemod v1.2 based on cwm 5.0.2.7 ..
and honestly i dont know which threat you are reffering to
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
mrjraider said:
Cyanogenmod 10.. There is a link to CWM..
On the wiki page (see the index i made) you can also find CWM and an installation guide.
Click to expand...
Click to collapse
if u could help me just a little more, i cant find it.
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
mrjraider said:
Wiki link http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001
Click to expand...
Click to collapse
thanks i managed 2 install cwm 6
but i encountered a new problem.
i installed the non-touch verision and now i cant do the "select" option
it is supposed 2 be the power button but it doesnt work
so now i cant do anything..
also i tried rom manager but it just opens recovery mode for me
any way i can return to an old verision of recovery w/o using the reovery mode so i can go back and install the touch verision this time?
There are more buttons to use. If i can remember you need to use the menu button
mrjraider said:
There are more buttons to use. If i can remember you need to use the menu button
Click to expand...
Click to collapse
tried them all.. i am really stuck here
appearntly alot of ppl have this problem.
is there any way to install it through odin or some other app?
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
mrjraider said:
Via odin install CWM 5.5.0.4.. See the wikilink i provided.. This one is stable and the homebutton is the choose button.
Click to expand...
Click to collapse
maybe im doing it wrong but odin doesnt even recognise the file.. and there is no guide there
i did try a odin flashable cwm V6 but its stuck on "setup connection" each time i try..
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Just flash TWRP and you're good to go
Sent from my GT-I9001 using xda app-developers app
mrjraider said:
Le tips:
- Patientce
- Remove and replug device
- Reboot device
- Use another USB port or cable
- Turn kies of (ctrl+alt+del > Taskmanager > Procesess > Terminate anything with KIES in its name)
- Turn AW/FW off
Click to expand...
Click to collapse
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
hey man relax... in wiki page you'll find cwm5.5.0.4 flashable zip and you can install it from recovery ( even from stock recovery if i remember corectly)... if you can't acces your phone you can copy it from pc to phone using recovery ( mounts and storage )... if you are stuck in recovery( you're phone boot in recovery only ) you'll need to flash the bootloader using odin.. also you can find the steps and necessary files in wiki and in cm10 by ivendor in firrst post ..Good Luck !!!
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
mrjraider said:
1: How did you softbrick it? What did you do, because I thought Odin got stuck??
2: You do see an Phone an ! and a PC?
3: You do have the latest ROM by Samsung and the correct AriesVE.ops?
If yes then we can get started. Follow my guide, when odin gets stuck at System (for a long long time > You know this because the green balk with time gets stuck) unplug device, reboot download again, reboot computer, and try again with BroodROM RC5 (see index)... (BroodROM RC5 is a last resort for our device since it has fixed many softbricked one including mine)
Click to expand...
Click to collapse
see the problem?
http://i39.tinypic.com/amp1ch.png
the thing is even tho i read your guide it seem like im doing something wrong..
for instance when i add the files both ops and "one package" file it doesnt see them so i have to write their location
shahaf321 said:
dude im fricking out..
i accidently soft bricked it and now im trying 2 flash it back 2 stock with odin through your guide
but odin recognises my pc recognises the ops file as a text file so odin doesnt even see it...
u gotta help me ;_;
Click to expand...
Click to collapse
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
educk said:
aaaand that's what happens when you start flashing random stuff to your phone without knowing what you actually do...
Ok, I wont tease you or anything, here is what to do:
READ THIS
THIS (all stuff from there, doesn't matter if you don't consider it necessary, you surely will in the future)
After you read all those and understand everything, flash back to stock using @mrjraider tutorial, it's a clear step by step one so follow every step.
Now, the thing is that you'll need CWM Recovery, not FeaMod which is only able to flash GB ROM's.
The most stable CWM recovery is CWM 5.5.0.4 you can find it at the bottom of the OT from this thread
HERE is how to flash CWM with Odin.
Please, pay attention and don't rush things up. And next time you have a problem post in an appropriate thread don't open a new one and especially not in the dev section, see this
Also, no user "gotta help you" you've chose to flash tings to your phone, if you mess it up, it's your own failure and nobody 'MUST' help you... (see this)
Click to expand...
Click to collapse
i did try using his guide and i folowed it step by step
my only problem is that odin gives me that message i showed in my last post..
also untill i fix this soft brick i cant move on to recovery mode so
i need 2 fix that first..
the guide doesnt show anything related to what im doing wrong..
Someone with brains would have removed odin, and the ops file and redownloaded it again. Also save those on your desktop
I write here to help me solve a problem with the mini s3 after turning not spend 30 seconds when powered down or rebooted ...
I did full wipes and reset from recovery and nothing .. I did the * 2767 * 3588 # either .. by odin I did a wipeI8190.md5 and nothing .. the cel turns back on as your last finished reboot .. in fact if I make a modification before they shut down or restart the phone back and not assumes the change .. and the USB debugging is not activated
I wonder if anyone happened to this and can help me.. the warranty is lost
thanks
First thing is to see if stock firmware in odin can help.
tys0n said:
First thing is to see if stock firmware in odin can help.
Click to expand...
Click to collapse
Yes is stock firmware.. theres no modificartion...
could manage to keep it active and enter the ram and select delete but when spend time the phone restart again, in fact delete all applications and messages and when I hes restart put everything back like used to be... and alsdo did the reset factory default and nothing hes restart over again with the same phone profile
flash http://megafiles.me/s/param_i8190-tar-md5 with Odin and reboot
JackoMJ said:
flash param_i8190-tar-md5 with Odin and reboot
Click to expand...
Click to collapse
also did that and still boot with the same configuration..
I'll make a video and I will upload to youtube
it seems is related to a material issue. i thought it's on your power button !
redomix said:
it seems is related to a material issue. i thought it's on your power button !
Click to expand...
Click to collapse
i dont think so.. i will post 2 videos showin the problem
here's the videos
is in spanish but i think is tunderstandable
youtube.com/watch?v=EZhKPInC5r4
and the second
youtube.com/watch?v=hT8e6T0ymJo
if you see in the last part of the second video i did the factory reset and the phone restart without nothing happend
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
redomix said:
i think you should flash TWRP or clockworkmod, make a backup of your files also the present rom,
After that, flash with a new rom like Cyanogenmod 10.2 from Maclaw and revert with the difference, maybe the problem will be fixed..
Click to expand...
Click to collapse
i can not flash becouse the phone not assumes any changes.. with odin i flash in the PDA a recovery.img a CWM and nothing.. even im update from chache/fota upadte of recovery and he gave me this error...
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
i think the problem that the phone no assumes anything with flashing is because is before hes broke or whatever happend to this F%$& is the USB debugging is not marked.. but i dont really now :S
try first flashing TWRP recovery.. can really help.. !
redomix said:
try first flashing TWRP recovery.. can really help.. !
Click to expand...
Click to collapse
can i do that without USB debbugin?
how can i see a tuto or something... im really new in this.. please...
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
redomix said:
you can do it with your android recovery, mount you internal or external sdcard with android recovery, download TWRP with zip format. and flash it within your android recovery with install.zip.
You can search on Youtube for tutorials.
Click to expand...
Click to collapse
men you see the videos? i cant put the USB debbugin mode plus everytime then i flash anything on the phone when he reboot the phone no make any change. still the same like you see in the 2 videos that i post on the other messages..
thanks for trying to help.. :good:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
redomix said:
Hey Brother,
Very Welcome, yes i've seen the videos, try to mount the internal sdcard with android recovery and copy the twrp recovery, or use another phone and copy the twrp file onto external SD Card, there's an option on recovery called update.zip flash with it,
if there's no change at all, try to flash it with ODIN.. if it don't recognize due to absence of USB Debugging, there's a tool called Samsung GS3 Mini ToolKit. maybe can help you. if not try with samsung KIES .. if also nothing helped you at this point, search around the internet for your problem, maybe you can find some useful help..
Cordially, I.R.
Click to expand...
Click to collapse
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
foxdie99 said:
hey men.. take a look at thsi image
img183.imagevenue.com/img.php?image=96227_20131210_231941_122_127lo.jpg
this is what happend when i do the update.zip..
im searching all over the internet and anybody has put som help.. in fact this is the 3rd forum that i put this problem...
thanks again..
Click to expand...
Click to collapse
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
Good tutorial bro, this is the same what i'm talking about.. it should work with these method.. waiting your reply.
PTGamer said:
actually its really simple to solve this problem...
1 - download and install the samsung drivers from here (http://get.maclaw.pl/?id=61)
2 - download odin here and install it.
3 - reboot your pc (this is the easy way to kill all kies processes and unwanted things) and make shure that kies dont start with windows.(if you have it installed)
4 - download this http://get.maclaw.pl/?id=301 (its the maclaw cm 4.4.2 for odin with the recovery twrp)
5 - flash the phone with odin(FOR THIS YOU NEED TO BOOT THE PHONE IN DOWNLOAD MODE, just boot the phone pressing POWER+VOLUME DOWN AND THE HOME BUTTON until a triangle and a warning appears follow maclaws guide -> http://maclaw.pl/installation-guide-golden/)... as soon as the flash finishes you'll be trapped in a boot loop (missing GAPPS)
just try to boot it the system should crash dont worry you're on the good way.
5.2 - remove the battery and put it back in (now you phone should be off)
6 - reboot on the new recovery that comes with the maclaw Rom you've just flashed for that you need to press POWER + VOLUME UP AND HOME BUTTON and mount you SD CARD.(you phone sould appear on you pc as a storage device or something like that)
7 - download this GAPPS here(http://get.maclaw.pl/?id=164)
8 - copy the downloaded GAPPS to you phone.
9 - go back to the 1st menu of the TWRP (a.k.a recovery) and you should see a thing saying install zip or flash zip (something like that)
9.2 - select the Gapps you've downloaded and flash it.
9.3 - after the flash finish select reboot system
9.4 - phone should start installing updates after the reboot
10 - wait until it finishes and the problem should be solved. now you can go back to the stock rom or stay with this rom.
the problem here is there's an app causing that problem. i had the same problem a few months ago.
the phone whould just crash or not function at all, rebooting all the time or from time to time...(it was one of the games i've installed from market)
after the phone is working dont install apps from unknow developers. even if it is from the market (believe wen i say you can get apps from the market that makes you're phone to malfunction).
Click to expand...
Click to collapse
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
foxdie99 said:
well men let me tell you the phone laguh hes ass off to maclaw TWPR hes reboot like before.. hes no assumes anychange... im little impress with this little piece of S%&T...
thanks for the tuto but dont work for me right now
i think is a service from google.. NLplocationreceiver. thats is the only one who`s dont start.. and keeps searchin
Click to expand...
Click to collapse
thats strange at least for me that worked...
meybe you have a faulty memory?