Brand new bricked please help! - Captivate Q&A, Help & Troubleshooting

Ok lets get straight to the point, I got a brand new captivate from at&t. Ive always used custom roms but never had an android. So of course i wanted to flash a custom rom. So i prepared my phone and followed ALL instructions for flashing a custom ROM. I couldnt run any update.zip files thoe because of the stupid verify thing. So LISTEN, I took the patch that patches 3e recovery back to 2e recovery aka kernal swap.....then everything worked fine and i got cwm to load and installed Apex_7.
AFTER the install was complete i was so excited. I selected reboot now, the AT&T logo came up and then the screen went all jacked up(looked like a broke screen) then went to the samsung logo and just keeps replaying it.
So after seeing this i freaked out and pulled the battery. Then i went and researched before doing anything else i came to the conclusion i needed to download odin pre-packed so i downloaded the odin stock installer.
Now LISTEN I put my phone into download mode ran odin and it said it succesfuly installed after about 3 minutes. So i then turn the phone off then turned it back on, it booted to the at&t logo then the screen goes black and loads at&t logo again (constant loop that heats the phone up)
AND NOW if i try to get into download mode it goes to the battery screen with no animation just a battery and a loading symbol
ALSO( I have made a usb jig ) BUT my ohm meter will not read the resistance of more than 2 resistors when i add the third one it reads it really fast and then shows nothing.
PLEASE HELP ME I LOVE THIS PHONE MORE THAN MY IPHONE OR MY HTC.
Credit will be given. I know someone here can save me from the dreaded face-to-face with at&t!!!!
Edit: Also when i got the phone i noticed a line of dead pixels on the left side very hard to see unless u look closely think i could get the phone replaced by using this as my excuse. idk what to say to AT&T if i do have to return. But i really hope not ive never ever had such problems flashing anyphone.

Please do not double post. You already asked (correctly) in the Apex sticky. No need to start another separate thread.

I posted both places because my problem may or may not be related to Apex. If Apex has nothing todo with my problem then i have correctly posted here.
Edit: Im trying to kill 2 birds with 1 stone

You are not fully bricked if your phone powers on at all. Just need a working jig. You can buy them from multiple sources
Sent from my I897 using XDA Premium App

Miami_Son said:
Please do not double post. You already asked (correctly) in the Apex sticky. No need to start another separate thread.
Click to expand...
Click to collapse
I noticed you are running a captivate. Any idea's on what my problem may be?
Corrupt boot loader, 100% brick. Any tips links or any info would be very helpful.

yaboydrew said:
I noticed you are running a captivate. Any idea's on what my problem may be?
Corrupt boot loader, 100% brick. Any tips links or any info would be very helpful.
Click to expand...
Click to collapse
I don't help people who think they are justified in double posting despite it being clearly against the forum rules.

mcord11758 said:
You are not fully bricked if your phone powers on at all. Just need a working jig. You can buy them from multiple sources
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
Finally shed me some light. Thats awsome dude thanks. I made my jig exactly how they make theres it wont work. The only thing i can think is im touching the wrong pins. I touch the top and bottom pins on the micro usb closest to the 3.5mm headphone jack???

It takes allot of trail and error and if the resistance is not right it won't work. purchase one from somewhere, search captivate usb jig on youtube, should find a source
Sent from my I897 using XDA Premium App

Miami_Son said:
I don't help people who think they are justified in double posting despite it being clearly against the forum rules.
Click to expand...
Click to collapse
Now your spamming my thread with non-sense if you dont want to help then go on about your business. I simply told you I DONT KNOW IF ITS RELATED TO APEX OR NOT THATS WHY I POSTED BOTH PLACES. SORRY, you dont have to act immature and exclude me from help. (whats the point of this forum then) Now i know dont post in 2 places because arrogant people will be sure to add frustration to your problem.

Don't mind the bs, just get yourself a jig and hope it works
Sent from my I897 using XDA Premium App

mcord11758 said:
Don't mind the bs, just get yourself a jig and hope it works
Sent from my I897 using XDA Premium App
Click to expand...
Click to collapse
Thanks il try a couple more times with my homemade jig if not il purchase one.
Thanks again.

You'll need to build a new jig or buy one(Moiletechvideos is what I would suggest), because if you can't get into download mode then you cannot be helped any further. And Miami_Son is right, you're not exempt from the rules. I realize it can be frustrating if something goes wrong, but you need to just cast that aside for the time being.

Superalpaca said:
You'll need to build a new jig or buy one(Moiletechvideos is what I would suggest), because if you can't get into download mode then you cannot be helped any further. And Miami_Son is right, you're not exempt from the rules. I realize it can be frustrating if something goes wrong, but you need to just cast that aside for the time being.
Click to expand...
Click to collapse
Ok i had my buddy come over and tried his jig that he bought online it looked like it had been manufactured just to be a jig we plugged it in and nothing ? any ideas
and i posted in the Apex thread to see if anyone could link my problem to apex then i also posted a similar story here to find a solution to my problem the Apex thread is just to narrow down the cause.

First, what is your phones revision ( on the back of phone, like 1008 ,1101 etc. ) i would just start over. Get that
phone in download mode, search for A10 TOOLBOX/captivate toolbox, everything you need is there. Two. Did your 3button combo work before? And your sure you cant get into recovery by your buttons?

rwells813 said:
First, what is your phones revision ( on the back of phone, like 1008 ,1101 etc. ) i would just start over. Get that phone in download mode, search for A10 TOOLBOX/captivate toolbox, everything you need is there. Two. Did your 3button combo work before? And your sure you cant get into recovery by your buttons?
Click to expand...
Click to collapse
I appreciate you taking your time to help. My phone is the SGH-I897 i could still use the 3 button combo before Odin and recovery but after i ran odin thats when everything got really jacked up now i cant get into recovery or download i think im not doing this jig thing right but if im correct i have a striped usb plug. With the screen facing down i have three prongs on the bottom and two on the top i touch the far right prongs top and bottom and hold for about 10 seconds. Thanks dude seriously I just got this phone and loved it but got tired of at&t bloating my phone with bs that eats my memory.
EDIT: the number next to the big CE is 0168 or what u might want is 1105 rev 0.4
EDIT: Also i dont understand what the diff is between rogers 2.6 and captivate 2.5 and how can i use these tools without a booting phone.

yaboydrew said:
Ok i had my buddy come over and tried his jig that he bought online it looked like it had been manufactured just to be a jig we plugged it in and nothing ? any ideas
and i posted in the Apex thread to see if anyone could link my problem to apex then i also posted a similar story here to find a solution to my problem the Apex thread is just to narrow down the cause.
Click to expand...
Click to collapse
Does your buddies JIG work just fine in other phones? If so you may have a short in pin 4 or 5 of your USB port. Are you able to issue the "adb reboot download" command when the phone is bootlooping? I have ADB command videos on youtube just search for them for help on that. Either way if you can't get it resolved with any conventional methods, I can restore the phone using advanced JTAG just PM me for info.

connexion2005 said:
Does your buddies JIG work just fine in other phones? If so you may have a short in pin 4 or 5 of your USB port. Are you able to issue the "adb reboot download" command when the phone is bootlooping? I have ADB command videos on youtube just search for them for help on that. Either way if you can't get it resolved with any conventional methods, I can restore the phone using advanced JTAG just PM me for info.
Click to expand...
Click to collapse
ive searched around on using adb i dont get how it will work do i download the android sdk and run cmd and cd:/ the adb then execute command but i thought in order for the phone to communicate with the adb wouldnt it have to be in debug mode and booted up

yaboydrew said:
I appreciate you taking your time to help. My phone is the SGH-I897 i could still use the 3 button combo before Odin and recovery but after i ran odin thats when everything got really jacked up now i cant get into recovery or download i think im not doing this jig thing right but if im correct i have a striped usb plug. With the screen facing down i have three prongs on the bottom and two on the top i touch the far right prongs top and bottom and hold for about 10 seconds. Thanks dude seriously I just got this phone and loved it but got tired of at&t bloating my phone with bs that eats my memory.
EDIT: the number next to the big CE is 0168 or what u might want is 1105 rev 0.4
EDIT: Also i dont understand what the diff is between rogers 2.6 and captivate 2.5 and how can i use these tools without a booting phone.
Click to expand...
Click to collapse
No problem bro, if i help just hit thanks. If cant figure our making the jig, i would just buy. Its a good investment for the future especially if tour flashing roms. Mobiletechvideos has one for 8 bucks and ships in couple days. They work wonders. The A10 toolbox/ captivate toolbox. Worka great, just search google and. Install it. Its got everything youll need packed inside. EX: it comes with the drivers, odin1click and 3buttonfix odin ( which youll need to do)
It also comes with the pda and tar files youll need, it also lets you root it but i suggest the one click root for captivate, get all that done first and well go from there.

Deleted double post

rwells813 said:
No problem bro, if i help just hit thanks. If cant figure our making the jig, i would just buy. Its a good investment for the future especially if tour flashing roms. Mobiletechvideos has one for 8 bucks and ships in couple days. They work wonders. The A10 toolbox/ captivate toolbox. Worka great, just search google and. Install it. Its got everything youll need packed inside. EX: it comes with the drivers, odin1click and 3buttonfix odin ( which youll need to do)
It also comes with the pda and tar files youll need, it also lets you root it but i suggest the one click root for captivate, get all that done first and well go from there.
Click to expand...
Click to collapse
Thanks man, i just got to get it into download mode. I shoulda just bought a jig in the first place i spent 20 bux on the materials to make a jig. Im inpatient person il trial and error for hours before waiting a couple days for a jig but i dont see why my homemade jig would be any dif from theres it consist of 301k resistance and a micro usb

Related

[Q] Is it over for my captivate???

I have a captivate (UCJH7)...
i flashed a few different roms then i flashed back to stock using 'I897UCJF6-final-OCD-REV0.exe'.. then it stopped going into download/recovery.Then i udated to 2.2 using kies. Then i wanted to flash cognition so i used adb to went to download mode. i flashed the speedmod kernel using odin and it rebooted and then "PHONE ! COMPUTER" symbol..
I cannot boot..
All i see is the phone ! comp symbol
I used 3 button combo,
tried removing everyting and holdin vol up+down then putting the battery
Odin doesnt recognize the phone and adb doesnt list any connected device
DOES THIS MEAN ITS OVER.. is it permanant brick?
or is there anything i can do???
everything i did uptill now was with the forums help so maybe somone has a solution
Thanx in advance
pruth93 said:
I have a captivate (UCJH7)...
i flashed a few different roms then i flashed back to stock using 'I897UCJF6-final-OCD-REV0.exe'.. then it stopped going into download/recovery.Then i udated to 2.2 using kies. Then i wanted to flash cognition so i used adb to went to download mode. i flashed the speedmod kernel using odin and it rebooted and then "PHONE ! COMPUTER" symbol..
I cannot boot..
All i see is the phone ! comp symbol
I used 3 button combo,
tried removing everyting and holdin vol up+down then putting the battery
Odin doesnt recognize the phone and adb doesnt list any connected device
DOES THIS MEAN ITS OVER.. is it permanant brick?
or is there anything i can do???
everything i did uptill now was with the forums help so maybe somone has a solution
Thanx in advance
Click to expand...
Click to collapse
Remove Battery insert usb cable hold vol up/down power put in batt release power button only keep holding vol up/down should go right in to download mode. I've done this many a time.
o/` Search the forums, buy a jig, doo-dah doo-dah,
People create threads about this exact problem, all the live long day o/`
if you get it up and going with the above meathod (should work) then definately use the 3-button fix next time. only once though because flashing bootloaders can be dangerous. once the recovery mode is working with button combo then flash speedmod (as long as the rom you want is on the sd card) or flash 2.2 then speedmod so the phone will be bootable.
also i'd redownload speedmod if you want to start over. could have been a bad download. also could have been a windows problem or a bad cable. hope you get it working.
hedgehogmd said:
Remove Battery insert usb cable hold vol up/down power put in batt release power button only keep holding vol up/down should go right in to download mode. I've done this many a time.
Click to expand...
Click to collapse
thnx for the quick reply...
Tried it but it doesnt work
Thank u guys for the support...
None of the methods r working..
I did spent a lot of time searching the forum b4 posting.. no luck
I ll try the jig but i dont want to cut the original usb that came with my capptivate so will se what i can get
pruth93 said:
Thank u guys for the support...
None of the methods r working..
I did spent a lot of time searching the forum b4 posting.. no luck
I ll try the jig but i dont want to cut the original usb that came with my capptivate so will se what i can get
Click to expand...
Click to collapse
Then purchase one or make your own. There's no need to cut up a cable.
Jig + Cappy = Eternal Life
pruth93 said:
Thank u guys for the support...
None of the methods r working..
I did spent a lot of time searching the forum b4 posting.. no luck
I ll try the jig but i dont want to cut the original usb that came with my capptivate so will se what i can get
Click to expand...
Click to collapse
I bought a jig from a well respected member here for $8. I have not had to use it yet (thank God!) but it is pretty cheap insurance!
I gat my self 1 and I place under my pyllow so I can sleep well
Sent from my GT-I9000 using XDA Premium App
I had this same thing one where no button combo worked to get into download mode. Turns out that i needed to restart my computer. who would have thought.
Pheww! I was out of hopes and was definitely going to buy the jig but just to see what happens if I pressed and hold the 3 buttons I long pressed them and the symbol disappeared and then came back then disappeared again then i left the buttons cuz I thought ill definitely need a jig so I let the buttons go and BAM! I was in download mode and I flashed serendipity
Thanx for all the quick replies...
Moral of the story - galaxy s phones are unbrickable
Sent from my SAMSUNG-SGH-I897 using XDA App
you can buy a jig here just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_623wt_1139
pruth93 said:
Pheww! I was out of hopes and was definitely going to buy the jig but just to see what happens if I pressed and hold the 3 buttons I long pressed them and the symbol disappeared and then came back then disappeared again then i left the buttons cuz I thought ill definitely need a jig so I let the buttons go and BAM! I was in download mode and I flashed serendipity
Thanx for all the quick replies...
Moral of the story - galaxy s phones are unbrickable
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Not unbrickable, just harder then most phones to brick.
miztaken1312 said:
Not unbrickable, just harder then most phones to brick.
Click to expand...
Click to collapse
And if it were to brick... it would definitely be the sexiest paper weight EVAR.
Twicebak3d said:
And if it were to brick... it would definitely be the sexiest paper weight EVAR.
Click to expand...
Click to collapse
So true
Your welcome
Now you say/press thanks
Teaching manners one person at a time
If your able to save 8 dollars buy a jig so you font have to mess with trying to get to download mode again.. My jig had saved me numerous times and I.only.bought one cause I had the same situation as you.. Jigs are worth it.
Sent from my SAMSUNG-SGH-I897 using XDA App
I am on ROM number 3 and have yet to run into any problems, but will be trading an extended life i9000 battery to a friend who has 2 jigs. The batt was sent to me by mistake, and is being replaced without me having to send back (not worth the shipping cost to the seller), so that works out for both of us.
.. And yes, it will turn my cappy into a camel, but I'm ok with that.
Sent from my awesome Captivate i896 on Cognition 4.3.
tupirujp said:
I gat my self 1 and I place under my pyllow so I can sleep well
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
lolol - You should stick that in your sig
the jig will help you:
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_623wt_1139

Is this a new one?

So about a week ago I tried to flash the alpha honeycomb rom. Played around with it a bit, but since Im in India I need my Tab to make calls via wifi back to the states, so I restored back to just before the flash. Then I saw there was a new build of Koush's kernal so I flashed that. About 3 days ago I started getting a weird wifi modem error and I would have to reboot to get wifi back. I just thought at first it was because the internet at my hotel isnt exactly amazing, and maybe i was building up a cache somehow? Honestly didnt really have a clue, but I didnt really care. Last night it got strange tho, I suddenly only had .90 mb of internal storage. I couldnt do anything because i had 0 space. So I deleted a few apps as fast as I could and used titanium to move everything else to the SD. I rebooted into cwm and wiped the cache, dalvik cahce, and even factory reset to no avail. then I downloaded the newest Koush rom thinking that if I just flashed another rom Id be fine because it would repartition and start fresh. Apparently not so much. I just bootlooped at the Verizon screen somehow. So again, thinking i knew what I was doing, tried to restore. Nooooothing again. Then I had to go to work so I got a buddys laptop and rebooted into download mode, installed heimdall on the pc and proceeded to try to flash the stock files from this thread: http://forum.xda-developers.com/showthread.php?t=955342&highlight=vzw ... thought all would be well, but I got an error saying descriptor not found. So i reinstalled the driver thinking that was the error I got. Tried again and got an error -12. So i unplugged to see if I could do aaannnything in cwm... and my screen did this... has anyone seen this or know how screwed I am?? Im in Mumbai for 12 more days and I think Ive had the tab for about 2.5-3 months so far... kinda screwed huh?
Don't worry!
This is my icon, I have been friend of it. My Tab still surive, see my signiture.
You will be back soon, I belive.
By the way, yours is CDMA , right?
Sent from my GT-P1000 using XDA Premium App
i cant see your sig
rainbow ng said:
Don't worry!
This is my icon, I have been friend of it. My Tab still surive, see my signiture.
You will be back soon, I belive.
By the way, yours is CDMA , right?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
You don't have a signature right now, just sayin'.
This statament :
Sent from my GT-P1000 using XDA Premium App
state I am using the Tab to browse through the forum
If u using GSM tab, I think I can help
Your case seem the stock rom u mentioned is not a full set rom with modem and phone, try to unzip the rom,is there dbdata.rfs? the icon only mean software brick which will back to life easily.
sadly im using cdma
Dude calm down. Thats an alternative download mode. Find a cdma stock firmware that you had search around for it. follow the guide of reflashing and you should be up and running again
Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=967175
This is the one that worked for me. Good luck!
So why have you posted in this forum?
The "non forum mod" mod strikes again... In his usual manner.
Sent from my "better than an iPad" tab.
so I made an attempt to flash the stock files. Hiemdall said it worked, but the progress bar on the tab never went past about halfway, overnight. Now it wont show that download screen unless its plugged into a power source and it turns itself off randomly then immediately turns back on into the download screen and does that process repeatedly. If I plug into the pc it is unresponsive and then turns off after a few min WTF did I dooooo?!?!
TheAdmira1 said:
so I made an attempt to flash the stock files. Hiemdall said it worked, but the progress bar on the tab never went past about halfway, overnight. Now it wont show that download screen unless its plugged into a power source and it turns itself off randomly then immediately turns back on into the download screen and does that process repeatedly. If I plug into the pc it is unresponsive and then turns off after a few min WTF did I dooooo?!?!
Click to expand...
Click to collapse
If you plug into a power source, without trying to turn your Tab on, do you get a battery icon?
Sounds like your battery is dead, in which case, if you can get it to charge you may yet be able to reflash...
Try letting it charge for at least a few hours and then take another crack at flashing.
btyork said:
The "non forum mod" mod strikes again... In his usual manner.
Sent from my "better than an iPad" tab.
Click to expand...
Click to collapse
Because im sick of seeing non-dev posts in the dev section. Its irritating to see and baffling how anybody could not have enough common sense to realise that posting stuff like this in here is wrong, We have a Q&A and Gen forum for that.
Because there doesn't seem to be any active Tab mods here to move/move, the only way make the users who make the posts in here aware is to tell them. If they are not made aware they will post their next topic here.
If nobody else is prepared to make them aware and to try and cut the crap down, I will, and don't care what you think.
when i had the origional error that you had it was because i tried flashing a kernel via heimdell on a virtual machine. i had the same screen, when i got to work the next day with a laptop that was windows i just booted into download mode and flashed a working kernel and it booted right up.
TheATHEiST said:
Because im sick of seeing non-dev posts in the dev section. Its irritating to see and baffling how anybody could not have enough common sense to realise that posting stuff like this in here is wrong, We have a Q&A and Gen forum for that.
Because there doesn't seem to be any active Tab mods here to move/move, the only way make the users who make the posts in here aware is to tell them. If they are not made aware they will post their next topic here.
If nobody else is prepared to make them aware and to try and cut the crap down, I will, and don't care what you think.
Click to expand...
Click to collapse
I agree that the forums need clearing. But you ploughing into every single misplaced thread isn't going to help.
You do realise you can tell the op that this isn't the right forum AND help them and point them in the right direction. Doesn't sound too hard right? Maybe try it sometime.
Sent from inside a whale.
GANJDROID said:
I agree that the forums need clearing. But you ploughing into every single misplaced thread isn't going to help.
You do realise you can tell the op that this isn't the right forum AND help them and point them in the right direction. Doesn't sound too hard right? Maybe try it sometime.
Sent from inside a whale.
Click to expand...
Click to collapse
And I do!
The point is that the help/advice had already been given on this one but nobody made the Op aware that he/she had posted in wrong place so would have likely done same again next time.
If nobody tells them how will they know? (apart from the obvious, ie reading forum titles.)
TheATHEiST said:
And I do!
The point is that the help/advice had already been given on this one but nobody made the Op aware that he/she had posted in wrong place so would have likely done same again next time.
If nobody tells them how will they know? (apart from the obvious, ie reading forum titles.)
Click to expand...
Click to collapse
I posted here because in other forums the general is mostly for those who have not rooted, and also have not flashed. In most cases people that know what theyre doing tend to only frequent the Dev sections, between that and the fact that all of my issues came from posts in the Dev section I thought this would be the correct place for it. apparently I am wrong, and sooo thankful that someone as heroic as yourself has stepped up to do away useless threads since we obviously have a space limit in our forum. wouldnt want to bog down our servers with my useless post of course...
regardless of the flaming and trolling... im still screwed, my post isnt moving and i will continue to ask those that know for help. thanks for the advice though, ill take it into consideration for my next post... now run along...
I have charged for about 9 hours now and still nothing could i have fried it somehow? If I bring it to verizon in the state its in, is there anyway for them to tell i flashed it? or will they just assume i did since it is pretty much in a state of brickiness as far as i can tell...
TIA and thanks to those whos British bigotry hasnt stood in the way of reading my post and attempting to lend a hand... where i come from the main purpose of a forum is to ask those who know for help and share the knowledge weve attained...
and im not getting a battery icon when i plug in, just the flashing on and off of the alternate download screen
thanks again
Ok to put this at rest coz its getting irritating. You are active old users. And you believe that tab needs more forum modding. I dunno what are the rules but when applying for a mod positions open apply or root for a candidate like yourself or nautious or bytork or anyone.
As for op does your tab get identified by your computer in odin or heimdell? As i said thats an alternate download mode. If computer identifies it. You can get a shot at flashing. Do it via a windows computer please. If tab is fried beyond repair which i doubt verizon will never know you flashed unless you tell them of course
sadly as of now the tab isnt read by the comp and i cant keep it in the download mode unless its plugged in

[Q] - Change ROM => Boot between start screens

Hi,
I own a Captivate on Rogers (Canada).
I had the ROM Firefly 2.6 (or 2.4) and decided to change to something quicker or at least different.
I decided to put Cyanogen 7 on it, because many people told me to.
I succeeded in installing Cyanogen and it worked great, easy to use, fast, ultra fast reboot, nice looking... but not all the software I was looking for.
So I decided to change again to a JVQ SIMPLY.
Put it on the SD, move it to sdcard via Astro under Cyanogen and reboot in recovery mode to install update from sdcard.
It wrote that it was ok, and needed to reboot.
Now the only thing I have is "booting" from
- the very first screen with Galaxy S I9000 on it to
- a second one with Galaxy S Cyanogen(mod)
I can access the screen with the little android guy in the public works sign, yellow, with Downloading... and Do not turn off Target!!! (did it trying hard reset).
I couldn't reboot with 3 buttons (tested many methods), the one with Odin, I never ever succeeded with that one, and it continues changing from a screen to another without stopping but if I remove the battery of course.
What can I do from there?
Thank you for your help... again...
Just for clarification, did you do the Odin One-Click to stock? If you can get to the download screen (the yellow sign / "Do not turn off target" screen), you should be able to flash back to stock.
I tried the Odin 1-click, but I think that it won't work right now because I can't access the administrator rights (from work).
I must try from home tonight.
Will it remove everything like the fact it is root?
Thank you for your answer by the way.
The lack of admin rights is very possibly why it won't work. There's also the chance that without admin rights, you're not able to install the samsung drivers. Either way, waiting until you get home sounds like a good idea.
You might be able to do the Heimdall one-click without admin rights, but it would probably be wise to read up on that one first as it's in Beta right now.
The one-click to stock will put your phone in the state it came out of the box, but leave all your personal files on the phone. You will have Eclair 2.1, unrooted, straight as it came from (in your case) Rogers. Any pictures, music, etc you saved on your internal sd card (not the microSD) will still be there, but you'll have to re-root and reinstall any rom you want.
Ok, so I tried different Odin (one click) I found here, and the last one, from here:
http://forum.xda-developers.com/showthread.php?t=1126704&highlight=odin
I flashed the PIT only, because I didnùt know what to put where... bad idea, now my phone doesn't switch on.
Soween said:
Ok, so I tried different Odin (one click) I found here, and the last one, from here:
http://forum.xda-developers.com/showthread.php?t=1126704&highlight=odin
I flashed the PIT only, because I didnùt know what to put where... bad idea, now my phone doesn't switch on.
Click to expand...
Click to collapse
Uh oh. Does your phone show any signs of life at all? Any lights come on, buzzers buzz, whistles whistle, etc?
No, nothing.
Soween said:
No, nothing.
Click to expand...
Click to collapse
Sorry to have to tell you this, but it looks like you might have fully bricked yourself.
If you are still under warranty, you can try to send it in for warranty service. If not, or if you aren't comfortable taking that route, look for a member named connexion2005 (or mobiletechvideos on google), who can do JTAG service for you for $50.
The JTAG thing is the special cable made from special resistor, right?
Or do you mean it is hard break and only expert can do something?
Thank you very much for your help and your support.
Soween said:
The JTAG thing is the special cable made from special resistor, right?
Or do you mean it is hard break and only expert can do something?
Thank you very much for your help and your support.
Click to expand...
Click to collapse
You're thinking of a Jig, which is a set of resistors that kicks the phone into download mode.
Unfortunately, you need JTAG, which is a special service that rewrites the bootloaders to the phone so that it can boot normally. That's something that you either need to be fairly knowledgeable about electronics to do yourself, or something you'll need to send in (to Samsung or mobiletechvideos) to have fixed.
Yeah I thought of a jig...
Ok, I will try the warranty, perhaps it is so much messed up, they won't find anything...
I will let you know.
See you.
Soween said:
Yeah I thought of a jig...
Ok, I will try the warranty, perhaps it is so much messed up, they won't find anything...
I will let you know.
See you.
Click to expand...
Click to collapse
Good luck - hopefully your next time around with custom Roms will go better.
I did many, many things with WInMo and never encountered any brick (sometimes I was close to the cliff, but never fell).
Since I have this Captivate, I not sure to really like it, I am fond of android either, and I don't take enough time to read carefully each post...
I think it is time for me to take an iphone...
Although you could do that, I think you'll find if you give yourself a little time with Android you'll come to really like it.
Don't get me wrong - the iPhone is a well made product. But it is one thing, and only one thing. Android devices can really be anything you want.
But that's my opnion. Do with it what you will.
People like you are gold, taking time to help newbie with the always same questions, don't selling android is the best (other are selling ios is the best), ...
I'll see what kind of hone I can find, because the Atrix was a cool phone I liked, and I always liked HTC (qtek before)...
Apple is expensive!!!
Soween said:
People like you are gold, taking time to help newbie with the always same questions, don't selling android is the best (other are selling ios is the best), ...
I'll see what kind of hone I can find, because the Atrix was a cool phone I liked, and I always liked HTC (qtek before)...
Apple is expensive!!!
Click to expand...
Click to collapse
Thank you. I'm just trying to repay the many favors everyone else here on the board has done for me in the past.
Definitely look around - if the Captivate isn't working for you, there's plenty of Android phones that are every bit as good. I've also had good luck with HTC phones in the past, and Motorola's not bad, either.
And yes, Apple is expensive. Can't argue with you on that one.
This might be stupid question but, is your battery charged ?
Hi,
aww.W.T.F, I hope so yes... it was on the usb for hours... you put me a doubt... I need to check now!!
I asked Rogers for warranty, they charge $35 for an exchange, and 5 days to wait, I think this is a little bit too much. But I will do it.
What I discussed with a guy is that I will finish my current subscription with Rogers and take the HTC Sensation with Virgin... Another try with android, to follow jmtheiss.
I will continue to let you know about how it goes.
If my profile is closed tonight, this will be because I will be too ashamed because I had an empty battery...
P.S. Ok it is not the battery... I'm waiting for my new one and will send this one to warranty (I'll see what they can find or not...).

Is my Captivate bricked?

I trying loading using Odin but it got stuck at "Setting up connection"
I then restarted PC and did it again and this time it went 2 more steps and then the screen became completely GREEN
Then I did the whole exercise again and now the screen became PINK
Now I am not even able to get into DOWNLOAD MODE...and neither do I see [mobile]![PC] icons.
Nothing happens. Is my phone now really bricked?
Please help! I am now worried about this
If the phone shows signs of life then its not bricked.
Also please don't create multiple threads on the same problem. It just clutters the forums even more.
I think I do not see any signs. It does not show anything on the screen even after trying download mode or recover mode. Powering on the phone also does nothing. I even kept the phone on charging the whole night but during the charging I did not see the usual green battery animation.
Is there anything left? Looks like I literally destroyed my working phone running 2.2. just by trying to upgrade it to 2.3 through Kies and then later using Odin.
I am very disappointed that how poor Samsung support is that a mere upgrade attempt destroys the phone. I had bought this phone 18 months ago by paying 540 $ and I now see it go down the drain
You can attempt contacting samsung if it was messed up with Kies but doubt they would do anything. But Kies is crap anyways. You can how ever attempt (or pay someone) to apply Unbrickable Mod (Adam Outler or MobileTechVideos.com)
there is one last thing you can try.
start odin on pc
take battery out of phone
put battery in
hold both volume buttons
plug USB cord in from pc to phone
if odin box turns yellow press start to flash a firmware!
it very rarely happens that you can do this but if you can, congratulations.
What odin u using ?
prbassplayer said:
You can attempt contacting samsung if it was messed up with Kies but doubt they would do anything. But Kies is crap anyways. You can how ever attempt (or pay someone) to apply Unbrickable Mod (Adam Outler or MobileTechVideos.com)
Click to expand...
Click to collapse
Thanks for the reply.
Will the "jig" hack work? My phone is totally unresponsive. No matter what I press nothing displays on the phone.
devangxda said:
Thanks for the reply.
Will the "jig" hack work? My phone is totally unresponsive. No matter what I press nothing displays on the phone.
Click to expand...
Click to collapse
Doubtful but no harm in trying
Sent from my ICS powered Captivate using Tapatalk
rkkaranrk said:
What odin u using ?
Click to expand...
Click to collapse
I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe mentioned by XDA member 4-2ndtwin.
Am i left with just JTAG as the only hope?
devangxda said:
I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe mentioned by XDA member 4-2ndtwin.
Am i left with just JTAG as the only hope?
Click to expand...
Click to collapse
UBM is better.
prbassplayer said:
UBM is better.
Click to expand...
Click to collapse
UMB..watching the videos looks like i will need some hardware hacker to fix it. Do you suggest a hardware novice should try it or leave it to the professional?
devangxda said:
UMB..watching the videos looks like i will need some hardware hacker to fix it. Do you suggest a hardware novice should try it or leave it to the professional?
Click to expand...
Click to collapse
You need decent soldering skills, else pay a professional.
Sent from my ICS powered Captivate using Tapatalk
I contacted Adam and he has agreed to offer his expert services. Now the problem is that I am in India and I can ship it to US but it will cost me dearly when he ships back because of the Indian custom rules. They will tread my repaired phone as a new one and add 15% duty costing me more than original phone cost.
So I am thinking of sending it through my friend who is visiting US later this month. However, I was looking around and found this link.
http://forum.xda-developers.com/showthread.php?t=1000175
Do you think this is something I should try? I already have good Arduino UNO toolkit.
devangxda said:
I contacted Adam and he has agreed to offer his expert services. Now the problem is that I am in India and I can ship it to US but it will cost me dearly when he ships back because of the Indian custom rules. They will tread my repaired phone as a new one and add 15% duty costing me more than original phone cost.
So I am thinking of sending it through my friend who is visiting US later this month. However, I was looking around and found this link.
http://forum.xda-developers.com/showthread.php?t=1000175
Do you think this is something I should try? I already have good Arduino UNO toolkit.
Click to expand...
Click to collapse
What you should know is Jtaging requires you to solder 6 very small spots vs UBM is 2 spots (I believe) and UBM will make your phone umbrickable. You could find a tech near you live that's good with a solder gun? Adam has a thread explaining the method.
Sent from my ICS powered Captivate using Tapatalk
Have you tried to force the phone into downloading mode using adb?
Using Doc's Master ROM v7: Cappy edition
KangKilla said:
Have you tried to force the phone into downloading mode using adb?
Using Doc's Master ROM v7: Cappy edition
Click to expand...
Click to collapse
No. I have not.
(a) How can it be done. I already have the Android SDK installed on my PC.
(b) My phone is totally non-responsive...it is totally blank black screen. Will adb work?
Adb requires phone on or in recovery
Sent from my ICS powered Captivate

[Q] insert brick type here...i need your help guys

Okay, obviously I was rooted. Everything was great. I went into CWM, when I was going to flash a simple script mod (which every phone can use) well I accidently clicked off into my SGII files (which of course was stupid of me) and it installed fluxii kernel for SGH-i777. (intern flashes a custom recovery for the xx tweaker that that particular kernel uses. Of course, I didn't even realize I had done it, just went to Reboot Now. Now, I've got no Download mode, no bootloader, no anything, just blackness, I feel as if there is a simple key process or way to somehow get it fixed so I can flash it back via ODIN, but with all the confusing button combo's and ideas I've found so far, and all the ' types of bricks ' I dont know the best route about doing this, whomever helps me get my phone unbricked/unsoftbricked/superbricked/cute bricked, which ever version (assuming its possible) I swear on my life I will mail them a 32GB HP touchpad.
(I have 3 and only need 2) so, I hope this in some way will get me an answer soon.
I cantbelieve I pulled a n00b. No more not moving data from SD cards for me ever again...
Thanks, and the sooner the better.
Mail me here, or gmail me ( [email protected]) or heck text me if you want (i have my SGII still) just message me priavtely for the number. Thanks you guys you're the best.
kobos311 said:
Okay, obviously I was rooted. Everything was great. I went into CWM, when I was going to flash a simple script mod (which every phone can use) well I accidently clicked off into my SGII files (which of course was stupid of me) and it installed fluxii kernel for SGH-i777. (intern flashes a custom recovery for the xx tweaker that that particular kernel uses. Of course, I didn't even realize I had done it, just went to Reboot Now. Now, I've got no Download mode, no bootloader, no anything, just blackness, I feel as if there is a simple key process or way to somehow get it fixed so I can flash it back via ODIN, but with all the confusing button combo's and ideas I've found so far, and all the ' types of bricks ' I dont know the best route about doing this, whomever helps me get my phone unbricked/unsoftbricked/superbricked/cute bricked, which ever version (assuming its possible) I swear on my life I will mail them a 32GB HP touchpad.
(I have 3 and only need 2) so, I hope this in some way will get me an answer soon.
I cantbelieve I pulled a n00b. No more not moving data from SD cards for me ever again...
Thanks, and the sooner the better.
Mail me here, or gmail me ( [email protected]) or heck text me if you want (i have my SGII still) just message me priavtely for the number. Thanks you guys you're the best.
Click to expand...
Click to collapse
I would rccomend trying to use Odin to see if it recognizes your phone? You may have to get a USB jig to force it into download mode and you may be able to save it that way I'm pretty sure a jig would work
Sent from my GT-N7000 using xda premium
Yeah thats Kinda my thinking as well unfortunately, Why the hell cant they sell them at like, I derno, the "rooted developer" store? hell Samsung should just include them in the box with as easy as root is. lmao What I don't get, is why the hell someone can't make a ' USB JIG ' out of their computer, or you know, something to tickle that little ports happy spot lmfao
kobos311 said:
Yeah thats Kinda my thinking as well unfortunately, Why the hell cant they sell them at like, I derno, the "rooted developer" store? hell Samsung should just include them in the box with as easy as root is. lmao What I don't get, is why the hell someone can't make a ' USB JIG ' out of their computer, or you know, something to tickle that little ports happy spot lmfao
Click to expand...
Click to collapse
Yeah, I'm mean there pretty cheap online and if you have the buts you can make your own since its only a 300k resistor. I think that's your only way out tbh :/
Sent from my GT-N7000 using xda premium
I just wanted this issue brought to attention to all the people from other forum sites ive tried to try their methods clearly, Marshmellows and Chicken dumplins wouldnt work, so if we could figure it out here, itd be nice to have it in a smart people zone. seriously someone f'n said, for me to stick my finger where the socket meets the charger... i was like, "consider me "BRICKED"
why cant they sell these damn jigs on craigslist for immediate satisfaction? oh well some idiot just offered to trade me one of my 3 SGII's I own for a note and 50 bucks haha "I WANT IT UNROOTED AND NORMAL" was his email. hahaha
kobos311 said:
I just wanted this issue brought to attention to all the people from other forum sites ive tried to try their methods clearly, Marshmellows and Chicken dumplins wouldnt work, so if we could figure it out here, itd be nice to have it in a smart people zone. seriously someone f'n said, for me to stick my finger where the socket meets the charger... i was like, "consider me "BRICKED"
why cant they sell these damn jigs on craigslist for immediate satisfaction? oh well some idiot just offered to trade me one of my 3 SGII's I own for a note and 50 bucks haha "I WANT IT UNROOTED AND NORMAL" was his email. hahaha
Click to expand...
Click to collapse
Lol, how much would you be willing to sell your touch pad for by the way? And eBay is probably a good bet for a jig. Its just a pain nearly all of them are sent from china so you have to wait like 2 weeks :/
Sent from my GT-N7000 using xda premium
IN TRUE NERD FASHION: any devices you'd be willing to part with for one or two of them, I have 10 16gb the day I remember telling mom "MOM LET ME BORROW 2000 dollars I swear it will pay off take it out of my savings anything" haha...
but cash isnt whats important to me, just technology really..idk, hell they're going for ridiculous onebay right now. and err, lets just say mine dont run CM9, or MIUI, hell I have my own recovery, Webos is all i knew for a while. I was always scared to post here, for the number of n00b post haters. I just stopped caring about those haha. I also have 2 Palm pre 2's running Android via a glitch in the Launcher/Wallpaper, and a Pre 3 Running ICS hybrided with basically the apps running in the 'recent windows ' version of ICS....
I really dunno man right now is I NEED TO GET THIS NOTE FIXED ASAP anyone know like a local place to go get it fixed temporarily they've gone to before. hell XDA should buy like shipments of them. we're the only ones that buy the damn things anyway.
also one more idea i found is this: idk if it just doesnt make sense to me, but if someone can make sense of it for me, and tell me its worth a shot...by all means..explain. http://samsunggalaxyreview2.blogspot.com/2011/07/one-click-unbrick-tool-for-samsung.html
kobos311 said:
also one more idea i found is this: idk if it just doesnt make sense to me, but if someone can make sense of it for me, and tell me its worth a shot...by all means..explain. http://samsunggalaxyreview2.blogspot.com/2011/07/one-click-unbrick-tool-for-samsung.html
Click to expand...
Click to collapse
It might be worth a go man. I would reccomend having it plugged into a computer and keep trying to turn it on even if the screen doesn't turn on and see if Odin picks anything up. Its not going to hurt your device anymore :/ you could always go to a hardware store and buy a mini USB and a 300k resistor and trying to make a jig yourself if that unbrick doesn't work (which I don't think it will)
Sent from my GT-N7000 using xda premium
Well what do I have to lose? Potentially (with better instructions of course and a noob friendly UI) if it works on my note, ill try it on my original galaxy...who knows few tweaks and maybe all these folks suffering from bricked Notes/SII/SIII's will have an easy way to fix it. (hey guys, just let me be optimistic here.. at least unti somebody else comes up with a bright idea haha
Quote of the day:
"I feel the same way about apple as I do herpes.
First good news (ill just edit this post from now on), I see alot of really weird things going on in my Device Manager, or well things that weren't there prior...time for phase 1.
kobos311 said:
First good news (ill just edit this post from now on), I see alot of really weird things going on in my Device Manager, or well things that weren't there prior...time for phase 1.
Click to expand...
Click to collapse
What have you done so far?
Sent from my GT-N7000 using xda premium
Fixed. I'll write up a XDA guide, and no I didnt use that silly guide. I used a trick the stupid guy at samsung tech support told me about something on the back of the phone will write up in a bit.
it involves a paperclip, and a hidden compartment behind somewhere where most would never dare stick anything, its rather a hidden reset button or something I wouldnt recommend it to anyone however...if someone finds themself in a bind id gladly help, but its that way or shipping it back if done wrong basically I just got lucky.
so CLOSE THREAD PLEASE THANKS
Red brick with white cement pattern, I dig that type of brick
Sent from my GT-N7000 using Trolltalk2000
kobos311 said:
Fixed. I'll write up a XDA guide, and no I didnt use that silly guide. I used a trick the stupid guy at samsung tech support told me about something on the back of the phone will write up in a bit.
it involves a paperclip, and a hidden compartment behind somewhere where most would never dare stick anything, its rather a hidden reset button or something I wouldnt recommend it to anyone however...if someone finds themself in a bind id gladly help, but its that way or shipping it back if done wrong basically I just got lucky.
Click to expand...
Click to collapse
McGuyver type nice. That or prevert sticking things in dirty places
Sent from my GT-N7000 using Tapatalk 2

Categories

Resources