Database Develop

New EVO radio img.

Incdoes mentioned the 2.15.00.11.19 radio on his twitter. This is an EVO radio. Please be sure to check the MD5 sum before install. Be advised this has the potential to brick your phone.
So far this one is getting mostly positive reviews. So give it a try.
Linkhttp://db.tt/QKn3wEn
Md5 sum:
e559db670e8c520b871e9a658f5acbb9
Checkerhttp://www.md5summer.org/
Edit: fixed link
thanks RegnierD

This feels like a bad idea.
Sent from my Incredible using XDA App

Gahh Its Lee said:
This feels like a bad idea.
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
yea..my thoughts.

Ugh
Gahh Its Lee said:
This feels like a bad idea.
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
I downloaded it, but have yet to flash. Sooooo tempting, but with my luck id lose my camera functionality or worse yet, brick.
I'm holding off till someone is alot more brave than I

If its for the evo, why is it in this forum?
Sent from my ADR6300 using XDA App

theguitarguy58 said:
If its for the evo, why is it in this forum?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
IncredibleDoes put it up on his Twitter page, saying:
Here is the new EVO radio.img for those that want to flash on their incredibles. I have not tested the new radio.
I am guessing that is why it is in this forum...

RMarkwald said:
IncredibleDoes put it up on his Twitter page, saying:
Here is the new EVO radio.img for those that want to flash on their incredibles. I have not tested the new radio.
I am guessing that is why it is in this forum...
Click to expand...
Click to collapse
Exactly why...I didn't even know you could do that but don't think incdoes would steer wrong

RMarkwald said:
IncredibleDoes put it up on his Twitter page, saying:
Here is the new EVO radio.img for those that want to flash on their incredibles. I have not tested the new radio.
I am guessing that is why it is in this forum...
Click to expand...
Click to collapse
I can't say that explains alot. The EVO and INC may be able to share ROMs and Kernels with some work , but i seriously cannot believe the radio software (which is at a hardware level, and is the only things that WILL brick a phone) would swap between them. The radio file controls the software for the radio, GPS, camera, and i highly doubt they would be compatible at all.
So i second the question - why is this here? It has nothing to do with the INC.

I thought the 9.01 radio was from the evo..

seanzer said:
I thought the 9.01 radio was from the evo..
Click to expand...
Click to collapse
Thats what i thought as well and thats what i am using

I flashed the link from IncDoes after aiccucs posted on Twitter that he did it with no problem.
It update the baseband to 2.15.00.11.19 (The previous radio leak was 2.15.00.09.01).
All radios and camera continue to work as expected. It hasn't been long enough to report on battery usage or other performance.

Same...it is safe flash away!
Sent from my Incredible using XDA App

joshuaarebalo said:
Same...it is safe flash away!
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
Same here, no ill effects from it that I have run into.

here is the link to download it for those of you that wanna try, btw, works good so far!
http://db.tt/F9khqUy

How did you flash it?
Haven't done a radio upgrade in a while...
tia,
jc

mrchambo said:
How did you flash it?
Haven't done a radio upgrade in a while...
tia,
jc
Click to expand...
Click to collapse
put it on root of sdcard, goto hboot and update
Sent from my ADR6300 using XDA App

mrchambo said:
How did you flash it?
Haven't done a radio upgrade in a while...
tia,
jc
Click to expand...
Click to collapse
just put the PB31IMG.zip in the root of your sdcard, and hold down volume down and powerbutton and load bootloader and it will finish the rest for ya
GOOD LUCK!

also FYI guys, the evo and incredible are EXTREMELY similar phones. Havent you noticed how its possible to port roms between the evo and inc without too much effort? remember the old days of WM when you could exchange radios between the diamond and touch pro? yes, the Evo has wimax, but its a separate radio flash. the part we are flashing corresponds to our 3g and 2g radios which are the same on evo and inc. I would know...i have both phones too...

Worked for me.. no discernable differences..

Not true at all the Eris and Hero radios were completely compatible. "BUT" A SURE WAY TO TRULY BRICK YOUR PHONE IS A BAD RADIO FLASH. Lol...
Sent from one of my Android phones via TapatalkPro

[MOD][Radio]BP_N_01.29.00R from Chinese Retail version of Atrix

download link is http://www.multiupload.com/X558NDM1WO
Tested on my bell atrix
If no signal or unknown baseband is found, just flash to other radio
it wont break the phone unless you have done sth awesome
UPDATE: I am upgrading this radio on top of France Orange 2.1.1
I don't own a ATT Atrix so I am not sure whether it works on ATT Atrix or not

ytwytw said:
download link is http://u.115.com/file/e615oxg1
then click on "电信下载" to start downloading
Tested on my bell atrix
trying to upload the radio file to the forum now... but really slow!
(YES, you know bell DSL sucks)
Click to expand...
Click to collapse
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App

josuetenista said:
Will this work on the at&t atrix?
Enviado desde mi MB860 usando XDA Premium App
Click to expand...
Click to collapse
I believe other radios have been used on the AT&T atrix before, you should be good to use this. If you end up w/o signal just flash SBF and you'll be back to normal.
Sent from my MB860 using XDA Premium App

and what can u say about new radio? is there smth new? smth better?

some att plz test it !!

What's the point of this radio?
Sent from my MB860 using XDA Premium App

frankiedizzle87 said:
What's the point of this radio?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
agurzhiy said:
and what can u say about new radio? is there smth new? smth better?
Click to expand...
Click to collapse
I just flashed yesterday, gonna see how it works (Bell Canada)
The point is to share...
however in China only 2100 band works, so I assuming it works better for Europeans instead of Americans
Let's see...

For a second there I had hope that it would be the same version as the stock Bell radio. (1.77, I had to look it up)
I am guessing that since China has some differences in their mobile networks compared to NA, it might be interesting to see if it improves things over here.
Cheers!

Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0

laitalk said:
Currently, I am using 4.1.83 ATT version. I failed to upgrade this radio from basebans version N01.77.15P via RSD 5.0
Click to expand...
Click to collapse
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.

Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes please, iam be the first ,iam sure we all want to try it

Didn't work for me tried flashing it twice even without the sim and sd inserted. I get no service and the phone menu doesn't allow me to select any bands etc.
Bell device w/ french rom

Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App

Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
yes,plz.i'm dying to use it.cuz i'm now living in china,and i uses the att atrix,the baseband don't fit the network.thx.

Whipon said:
That's because of the ram downloaders this sbf uses. It will not work on an AT&T Atrix.
I can make a compatible sbf if some people want to test it.
Click to expand...
Click to collapse
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.

frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
from what i can see,
your definition of "benefits" must be very limited. not everyone needs hsupa, i'd live without it if it improves stability.
you have no idea about what ymmv means. with the vast possibilities/combinations of different carriers/terrains/vendors/gen of devices, why would you even ask about the "benefits"? chances are someone would benefit from it but just not you.

racca said:
i made it a few days back, and it failed on my at&t sku.
to be specific, it flashes, but the phone boots up without signal and "unknown" baseband.
Click to expand...
Click to collapse
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.

Whipon said:
I see. So its pointless to make another one for AT&T.
Thanks for clarifying it ^^.
Click to expand...
Click to collapse
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat

lanyao1920 said:
I'm in China and I wanna this, thanks!
The default att baseband doesn't work so well in my area, loss signal and too much heat
Click to expand...
Click to collapse
what exactly do you think this baseband is gonna do to an at&t sku?
you'd most likely go from "loss signal and too much heat" to no signal at all.
i suppose you can just turn on flight mode if you want it so bad.

ytwytw said:
so I assuming it works better for Europeans instead of Americans
Let's see...
Click to expand...
Click to collapse
we have 900/1800/2100
atrix should launch these days in mid europe, maybe there's a better compability with our radio for switching in baseband...
i got a at&t atrix too, no setting for FU baseband, just the american one... (quadband eh?)
frankiedizzle87 said:
Im asking are there any benefits.to this if your on att. We have hspa and hsupa what's this have to offer?
Click to expand...
Click to collapse
baseband does seriosly nothing to packetservice?

[Q] Need a specific version of OpenRecovery

Please help I have searched everywhere and cannot find a link for a recovery based off skrilax 1.14OR I know it's really outdated but I would like this version for the shear fact I can't flash motofroyosense properly from any of the newer ones.
Edit: also I have a milestone

uploading
You'll get the link in 5 minutes.
There you go. njoy
http://mir.cr/0MOUHITR

Thanks so much! I can tell I'm going to be very happy at XDA

Motofroyosense
After I downloaded OR 1.14 I was still stuck at the M. I guess the rom is just broken because .21 of MFS will install but it don't have all the fixes .25 has. Thanks again, and sorry for the double post

Roundtableprez said:
After I downloaded OR 1.14 I was still stuck at the M. I guess the rom is just broken because .21 of MFS will install but it don't have all the fixes .25 has. Thanks again, and sorry for the double post
Click to expand...
Click to collapse
Install got 2.2.1 using rsdlite and then try MFS 0.25. It should work.
Sent from my GT-I9100 using Tapatalk

sileshn said:
Install got 2.2.1 using rsdlite and then try MFS 0.25. It should work.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
i did this the other day and it didnt work. tried again today without OR1.14 and it worked fine... guess my milestone likes to work on occasions. i thanked you anyways since i used your advice lol. close thread mod?

[DEV Request] Bridge the gap between Bell/AT&T Atrix's

It's most likely impossible, but for a Bell user to be able to flash an ATT SBF and actually have it work would be amazing. As I'm 99% sure if we ever see gingerbread come from Bell this month (or summer for that matter) it most likely will not have an unlocked bootloader. I'm willing to do whatever necessary in order to help.
I'm no expert, but so far what I know of the difference involves the fact that we were able to install ATT themes/psuedoRoms by booting into recovery and using "Wipe DATA/Factory Reset". (http://forum.xda-developers.com/showthread.php?t=1070076). Why this is so I'm not sure.
Thanks for any consideration of the topic.

Ok. I'm no dev and I don't have bell. However, I was thinking... Could you use recovery to flash a flashable .zip file of the 1.83 update and then unlock that way? Not sure if that would work at all but it just crossed my mind.
Sent from my unlocked, rooted, badass atrix running 2.3.4 made possible by many great devs! Thank you all!

lyon21 said:
Ok. I'm no dev and I don't have bell. However, I was thinking... Could you use recovery to flash a flashable .zip file of the 1.83 update and then unlock that way? Not sure if that would work at all but it just crossed my mind.
Sent from my unlocked, rooted, badass atrix running 2.3.4 made possible by many great devs! Thank you all!
Click to expand...
Click to collapse
Wont work cause zip with fail cause can't flash the boot.img file.
Sent from my MB860 using XDA Premium App

stevendeb25 said:
Wont work cause zip with fail cause can't flash the boot.img file.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Got ya. That makes sense.
Sent from my unlocked, rooted, badass atrix running 2.3.4 made possible by many great devs! Thank you all!

OP - Requests do not belong in the development section. For future reference. It does suck that Bell is lagging so far behind AT&T though...

If your referring to that fact that they were able to get the Chinese version to load onto an ATT phone and then unlock the bootloader and not the Bell then yes unfortunate...But Bell isn't lagging behind ATT...Correct me if im wrong but i don't remember hearing any official announcements about when ATT was going to be getting the official gingerbread update.
On topic, i too wonder if there is a way to merge the two as it seems very fragmented right now.
From what i understand it's a matter of the Bell Atrix having a different "framework" than ATT.
Hopefully some Dev's care enough to maybe make a go at it? =)
my 2 cents
cheers

Guys the UK official gb release is coming out the same day as the ATT one. We can just flash the uk one, unlock, and then flash any atrix roms can we not?

And what garantee the uk one will be unlocked?

guidoido004 said:
And what garantee the uk one will be unlocked?
Click to expand...
Click to collapse
I agree, Motorola said they would only unlock bootloaders where "carriers permit".
However, what would be the result of flashing an ATT sbf, as I don't know if anyonr has tried it but I have heard that RSDLite doesn't allow a Bell phone to flash an ATT sbf. If the hardware in the two phones is identical then at least in theory they should be able to flash either sbf. Or am I wrong?

4real*leb said:
I agree, Motorola said they would only unlock bootloaders where "carriers permit".
However, what would be the result of flashing an ATT sbf, as I don't know if anyonr has tried it but I have heard that RSDLite doesn't allow a Bell phone to flash an ATT sbf. If the hardware in the two phones is identical then at least in theory they should be able to flash either sbf. Or am I wrong?
Click to expand...
Click to collapse
They signed with different sigatures
Sent from my MB860 using XDA Premium App

Another awesomely garbage thread. This isn't YouTube; quit taking dumps on your keyboard and hitting "Submit" at the end. Use the search function, damn it. Did you even consider doing some research before clogging up this board?

mods please move this thread to general or Q&A

OKay, i need someone with a bell phone to please upload their build.prop and PM me with it!

samcripp said:
OKay, i need someone with a bell phone to please upload their build.prop and PM me with it!
Click to expand...
Click to collapse
Now that's taking the bull by its horns!
Can anyone post any updates of whether or not they have sent samcripp their build.prop?
I can't on my phone because i have a different sbf flashed onto it but i DO have my wife's atrix....all I've done to it is root it and freeze the bloatware...
Maybe i can look into where i can locate the build.prop file and send it to you=)

Sent you a link sir

Magnetox said:
Guys the UK official gb release is coming out the same day as the ATT one. We can just flash the uk one, unlock, and then flash any atrix roms can we not?
Click to expand...
Click to collapse
Will the uk build have unlockable BL?
Sent from my MB860 using XDA Premium App running samcripp 2.3.4 fruit cake

msd24200 said:
Will the uk build have unlockable BL?
Sent from my MB860 using XDA Premium App running samcripp 2.3.4 fruit cake
Click to expand...
Click to collapse
Doubt it. As the bell and at&t ota.zips for gingerbread. The bootloaders are still locked
Sent from my MB860 using XDA Premium App

What is my XT860? Droid 3 or Droid 2?

Hi everyone,
I have an XT860 from Bell Canada. I would like to mod it. Can someone tell me if it's a Droid 3 or Droid 2?
Also, what are the latest versions of Android available for these devices? The one installed now is 2.3.6 and I would very much like to jump to a Jelly Bean.
I appreciate some input before I waste too much trying to mod this.
Thanks

Droid 3. You're in the right section. Each ROM has an 860 patch but the problem is that the development on JellyBean has kind of stalled since the camera isn't working.

MrObvious said:
Droid 3. You're in the right section. Each ROM has an 860 patch but the problem is that the development on JellyBean has kind of stalled since the camera isn't working.
Click to expand...
Click to collapse
MrObvious, thanks a lot for the feedback.
1- What is an "860" patch?
2- What is the latest stable version of Android for my device? Not looking for Jelly Bean if camera doesn't work.
3- Where can I find instructions and latest ROMs for my device? ***I don't want to mess up the radio frequencies as it's a Canadian phone***
Thanks again.

Basically it just patches a few files and the build.prop so that it works with the 860 as all our ROMs are built for the 862 which is the Verizon CDMA version. Just flash a ROM and look for a patch. Minimoto is a good one because it has stability and Endroid made a patch that works.
Sent from my DROID3 using xda app-developers app

MrObvious said:
Basically it just patches a few files and the build.prop so that it works with the 860 as all our ROMs are built for the 862 which is the Verizon CDMA version. Just flash a ROM and look for a patch. Minimoto is a good one because it has stability and Endroid made a patch that works.
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
Thanks again. So, where is the official mod thread? From what you said, I first mod it and then apply the Minimoto patch for 860. Did I get that right or is there a ROM specific to 860 that I should do?
The phone is unlocked and rooted but I don't think I have the framework to install ROMs so I probably need to read the official modding thread.
Thanks

torontobc said:
Thanks again. So, where is the official mod thread? From what you said, I first mod it and then apply the Minimoto patch for 860. Did I get that right or is there a ROM specific to 860 that I should do?
The phone is unlocked and rooted but I don't think I have the framework to install ROMs so I probably need to read the official modding thread.
Thanks
Click to expand...
Click to collapse
For minimoto I'm moving the actual rom. If you look through the posts in the minimoto thread you'll find the link to the 860 version. I'd link you but I'm on my phone and it's a pita
Sent from my DROID3 using xda premium

Endoroid said:
For minimoto I'm moving the actual rom. If you look through the posts in the minimoto thread you'll find the link to the 860 version. I'd link you but I'm on my phone and it's a pita
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
I will go with Minimoto first and then try other MODs. There are many threads on Minimoto. I wonder why there is no sticky "Droid 3 ROMs & Instructions"
So far I learned that I have to install (somehow) SafeStrap and then MiniMoto ROM. Am I getting that correct? Is there a comprehensive guide to this specific to XT860?
Thanks

Sounds like you're getting it. Then look through the Minimoto thread to find the 860 patch.

MrObvious said:
Sounds like you're getting it. Then look through the Minimoto thread to find the 860 patch.
Click to expand...
Click to collapse
Thanks. Is this the official Minimoto ROM thread? http://forum.xda-developers.com/showthread.php?t=1978304
It mentions it's for XT862 but mine is XT860 and a Canadian version (Bell Canada). Would I be safe to use that?

torontobc said:
Thanks. Is this the official Minimoto ROM thread? http://forum.xda-developers.com/showthread.php?t=1978304
It mentions it's for XT862 but mine is XT860 and a Canadian version (Bell Canada). Would I be safe to use that?
Click to expand...
Click to collapse
Here's the 860 version
http://forum.xda-developers.com/showthread.php?p=35709354
Sent from my DROID3 using xda premium

Endoroid said:
Here's the 860 version
http://forum.xda-developers.com/showthread.php?p=35709354
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Thanks for the post but that is a huge thread. Were you meaning to point to the thread or a link within it?
Thanks

torontobc said:
Thanks for the post but that is a huge thread. Were you meaning to point to the thread or a link within it?
Thanks
Click to expand...
Click to collapse
Actually his link goes right to the patch (to the post with the patch)

DoubleYouPee said:
Actually his link goes right to the patch (to the post with the patch)
Click to expand...
Click to collapse
Yes, it does. I was hasty and not waiting for full page to show up. Thanks.
1- I have got Minimoto installed but Android version is 2.3.4 and that is lower than the 2.3.6 that came as stock. Is there anyway to upgrade that?
2- Would overclocking make a major different? Where is the official guide for overclocking for XT860?
Thanks

1 no 2 it can make it feel smoother
Sent from my DROID3 using xda app-developers app

MrObvious said:
1 no 2 it can make it feel smoother
Sent from my DROID3 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I have installed Minimoto and here are some of the problems I am facing if there are any work-arounds for them?
1- I have been only seeing 3G and Edge for internet connection. On stock I can see H+ as well.
2- From time to time the phone doesn't have any internet connection and it has to be restarted to get internet connection - that is a big annoyance.
Any feedback?
Thanks again.

torontobc said:
Thanks. I have installed Minimoto and here are some of the problems I am facing if there are any work-arounds for them?
1- I have been only seeing 3G and Edge for internet connection. On stock I can see H+ as well.
2- From time to time the phone doesn't have any internet connection and it has to be restarted to get internet connection - that is a big annoyance.
Any feedback?
Thanks again.
Click to expand...
Click to collapse
1)these are just cosmetic, you can have it show the h+ through build.prop edits
2)try adding the line ro.ril.hep=0 to the build.prop, it should help, and try just toggling airplane mode to reset the connection, easier than rebooting
Sent from my DROID3 using xda premium

Endoroid said:
1)these are just cosmetic, you can have it show the h+ through build.prop edits
2)try adding the line ro.ril.hep=0 to the build.prop, it should help, and try just toggling airplane mode to reset the connection, easier than rebooting
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
This is already there:
#improve signal stability maybe
ro.ril.hep=0
Would I be in better situation if I can an LTE sim card even though the phone doesn't support LTE but network does so maybe signal would be better?

torontobc said:
This is already there:
#improve signal stability maybe
ro.ril.hep=0
Would I be in better situation if I can an LTE sim card even though the phone doesn't support LTE but network does so maybe signal would be better?
Click to expand...
Click to collapse
No, the phone most likely wouldnt even be able to read it. It happens to me pretty regular, I just toggle airplane mode
Sent from my GT-P5113 using xda premium