I installed it on my Nexus One and then grabbed the APK with Titanium Backup. I can install it on my Xoom and run it, but it won't let me login, etc. because the device isn't supported. I thought I'd post it in case any of you know how to tinker with it to remove the device compatibility check.
They got hulu working in browser, Hope they can get this app working.
You would think netflix and hulu would have released a app for tablets by now. It would benefit on both partys as far as sales so why they havent yet is beyond me.... -_-
Sent from my HTC Vision using XDA App
luis86dr said:
You would think netflix and hulu would have released a app for tablets by now. It would benefit on both partys as far as sales so why they havent yet is beyond me.... -_-
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
At a guess, because they're having to work with multiple vendors for hardware DRM because that's what the media holders require.
That, and JNI/C++/Android NDK developers with enough experience to do the necessary coding are extremely hard to find. We may be having to wait while each vendor ramps one of their developers up on the necessary technologies.
http://channelandroid.com/2011/06/23/how-to-get-hulu-plus-on-an-unsupported-device-needs-root/#comments
qubit76 said:
http://channelandroid.com/2011/06/2...on-an-unsupported-device-needs-root/#comments
Click to expand...
Click to collapse
Anyone actually get it going with the build.prop edit? I had no luck.
Sent from my Xoom using XDA Premium App
B Dizzle said:
Anyone actually get it going with the build.prop edit? I had no luck.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
nope did not work on either Xoom or CM7 Vibrant
Thank you!! Thank you for this file. It works on my Incredible
What was your problem, did anything error out? I'm the one who wrote the article.
I used sed to make it easier (cut and paste) I could tell you a more manual way of doing it.
neonerz said:
What was your problem, did anything error out? I'm the one who wrote the article.
I used sed to make it easier (cut and paste) I could tell you a more manual way of doing it.
Click to expand...
Click to collapse
I got a device not supported error on the Xoom after applying the build.prop edits. I think there may be more we should be editing for this device.
Sent from my Xoom using XDA Premium App
B Dizzle said:
I got a device not supported error on the Xoom after applying the build.prop edits. I think there may be more we should be editing for this device.
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
I think you misunderstood the post (and I'm sorry if you did). This was just to make it show up in the Market. This wouldn't make the app itself allow playback if you got the error message.
Some devices do work that aren't supported (for example my Nook Color running CM7) so it makes me think that there has to be some way to get around the check, but unfortunately, that's beyond my skill set.
That makes more sense and I misunderstood your post.
Sent from my Xoom using XDA Premium App
Thanks for this. Will have to give it a try.
This worked out for me.
http://rootzwiki.com/showthread.php?t=2556
Didn't get the sh script to work, so I just read it and did what it said in terminal emulator.
Sent from my ADR6400L using XDA App
wfagan59 said:
This worked out for me.
http://rootzwiki.com/showthread.php?t=2556
Didn't get the sh script to work, so I just read it and did what it said in terminal emulator.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Worked for me too. Too bad we can't force the app to landscape.
I have no idea on how to use that script.
Could you guys back up the app with TB and re upload here?
Kippui said:
I have no idea on how to use that script.
Could you guys back up the app with TB and re upload here?
Click to expand...
Click to collapse
http://rootzwiki.com/showthread.php?t=2526&pagenumber=
This method may be a little easier for you. I tested it and it seemed to work just fine.
Directions:
1. Delete Hulu Plus if you have it installed already.
2. Delete any backups you may have of it in Titanium Backup.
3. Get Titanium Backup if you don't already have it.
4. Download this file and unzip it, there will be 3 folders in it.
5. Place all 3 folders in the sdcard/TitaniumBackup folder
6. Launch Titanium Backup and restore the backup.
7. Enjoy?
And of course I'm not responsible for anything that goes wrong and blah blah blah.
PLEASE NOTE: You can't use "Ad Free" or anything that modifies hosts for this, or the videos won't load.
^
Bruh, that worked perfectly. Thanks
Can we get hbogo the same way?
B Dizzle said:
http://rootzwiki.com/showthread.php?t=2526&pagenumber=
This method may be a little easier for you. I tested it and it seemed to work just fine.
Directions:
1. Delete Hulu Plus if you have it installed already.
2. Delete any backups you may have of it in Titanium Backup.
3. Get Titanium Backup if you don't already have it.
4. Download this file and unzip it, there will be 3 folders in it.
5. Place all 3 folders in the sdcard/TitaniumBackup folder
6. Launch Titanium Backup and restore the backup.
7. Enjoy?
And of course I'm not responsible for anything that goes wrong and blah blah blah.
PLEASE NOTE: You can't use "Ad Free" or anything that modifies hosts for this, or the videos won't load.
Click to expand...
Click to collapse
I just tried this and still got the "Device is not supported..." message. I'm running rooted stock 3.2. Did I do something wrong?
Did you make sure you removed all instances of previous hulu plus installs? I am running Tiamat 2.1 and it is working for me but I used Root Explorer to delete all hulu plus data before attempting the steps.
Sent from my Xoom using XDA Premium App
Related
Anybody got this app? It was on the market free for the Galaxy Tab.
Sent from my HTC Vision using Tapatalk
found it on the market.
djunio said:
Anybody got this app? It was on the market free for the Galaxy Tab.
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
I don't have it installed but I was able to find it on the market using my GTAB.
What ROM your on? I can't find it on Vegan. The only one that shoes up is the one for phones and it doesn't recognize that I'm on WiFi.
Sent from my HTC Vision using Tapatalk
djunio said:
What ROM your on? I can't find it on Vegan. The only one that shoes up is the one for phones and it doesn't recognize that I'm on WiFi.
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
I'm on VEGAn Beta 5.1
I have full market capability, Ok.. Maybe its more like 98.9% capabilities.. *lol*
Check this video on getting full market, it really worked for me with this ROM.
http://www.youtube.com/watch?v=7l-nySibzeA&feature=related
Edit: I just installed "NYTimes for Android Phones" and it works fine with the GTAB.
I'll try that later, it tells me there's no connection.
P.s. I hate your tab for having it work lol
Sent from my HTC Vision using Tapatalk
both the tablet and phone versions work on mine. Both are really slow though. Really annoying and I probably won't be using, but it does work.
I want even c the tablet version. It's free, can u upload the apk plz
Sent from my HTC Vision using Tapatalk
djunio said:
I want even c the tablet version. It's free, can u upload the apk plz
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
You might be interested in checking out Readers Hub and Zinio with it. The combination will let you subscribe to hundreds of newspapers and almost a hundred magazines. It works great on my gTab running VEGAn beta 5.1.
sjmoreno said:
You might be interested in checking out Readers Hub and Zinio with it. The combination will let you subscribe to hundreds of newspapers and almost a hundred magazines. It works great on my gTab running VEGAn beta 5.1.
Click to expand...
Click to collapse
Thanks, will do. But I need this particular app.
NY Times (Free)
djunio said:
Thanks, will do. But I need this particular app.
Click to expand...
Click to collapse
Here you go.
sjmoreno said:
Here you go.
Click to expand...
Click to collapse
Thank u sir, that works perfect.
Sent from my GTablet-TnT-Lite using Tapatalk
Pardon the newbie, but how do I install this? I tried renaming to an API, but while that brings up the normal install screen with permissions, it then won't install.
EwanG said:
Pardon the newbie, but how do I install this? I tried renaming to an API, but while that brings up the normal install screen with permissions, it then won't install.
Click to expand...
Click to collapse
Do not rename it. Copy the zip to your gTab (I use my Download directory) and then launch it by selecting it and it will install. You must have set your gTab to allow for installation of "unknown sources" in your Settings --> Application --> Unknown Sources.
If you're going to be doing a lot of sideloading I would highly recommend you sign up for a free Dropbox account which will allow you to move files back and forth from any device that you install Dropbox on.
sjmoreno said:
Do not rename it. Copy the zip to your gTab (I use my Download directory) and then launch it by selecting it and it will install. You must have set your gTab to allow for installation of "unknown sources" in your Settings --> Application --> Unknown Sources.
Click to expand...
Click to collapse
So, I already had that in settings, but when I go to "select it", ES File Manager does not give me an option to install. If I "double click" it simply navigates into the ZIP file. Obviously some simple step I'm overlooking?
I flashed it in cwm.
Sent from my HTC Vision using Tapatalk
EwanG said:
So, I already had that in settings, but when I go to "select it", ES File Manager does not give me an option to install. If I "double click" it simply navigates into the ZIP file. Obviously some simple step I'm overlooking?
Click to expand...
Click to collapse
You could use clockworkmod to flash it as djunio has written.
sjmoreno said:
You could use clockworkmod to flash it as djunio has written.
Click to expand...
Click to collapse
Same problem as renaming to an APK. It starts to install, then quits with no message other than "Application not Installed". I'm wondering if it is checking for something that is (or isn't) present on my G-tab.
I'm running Vegan 5.1 with the ClemSyn kernel if that would make a difference.
I would download it again then flash the zip in cwm. Maybe it got corrupt somehow.
Sent from my HTC Vision using Tapatalk
djunio said:
I would download it again then flash the zip in cwm. Maybe it got corrupt somehow.
Sent from my HTC Vision using Tapatalk
Click to expand...
Click to collapse
adb push apk to data/app-private
adb push zip to data/app
Doesn't seem to work. I am rooted.
I've updated to the latest patches that are available in the app, rebooted as it suggests to do, and I still get ads in my apps.
Is this not working for Honeycomb yet? Anyone else had any luck with it.
ive been using it and its working fine for me.
Works fine here too.
Well, I just rooted yesterday and mine is not working either. I have tried on stock browser and other sites, and the ads are continuing to come through.
Anyone have any ideas as to why this is happening and/or how to correct it?
I had the same problem, so I switched to the ad blocker in jrummy's DROID overclock app (-> extras). Works well.
Sent from my DROIDX using XDA Premium App
I've tried that one, and it doesn't work either.
not rooted yet so I haven't tried, but have you rebooted since install?
More than a few times.
I am having the same issue. Maybe someone will come thru with An answer soon
you have to click app then click update and install the new host then it will work
chbennett said:
I had the same problem, so I switched to the ad blocker in jrummy's DROID overclock app (-> extras). Works well.
Sent from my DROIDX using XDA Premium App
Click to expand...
Click to collapse
fearfraqment said:
you have to click app then click update and install the new host then it will work
Click to expand...
Click to collapse
Tried all that awhile back, and it's still a no go. Nothing seems to work.
Has anyone found a solution to this problem?
I use a hosts file instead of an app. Just rename the attached to just hosts copy the attached to /system/etc and overwrite the existing done (not quite you have to reboot). No app required. Use an app if you want I just don't see the need to and I include this in my ROM.
Hit thanks if this helps, if not then hit the no thanks.
zone23 said:
I use a hosts file instead of an app. Just rename the attached to just hosts copy the attached to /system/etc and overwrite the existing done (not quite you have to reboot). No app required. Use an app if you want I just don't see the need to and I include this in my ROM.
Hit thanks if this helps, if not then hit the no thanks.
Click to expand...
Click to collapse
It tells me I cannot paste the file because that is a read only folder.
I found out how to overwrite the file, and and it works.
FINALLY!
It's a not 100%, and but 80% of the ads are gone, and and that's good for me. Thanks for the assist.
Could anyone pls upload the movie studio.apk?
Thx very much!
Ev
Here you go
Thanx very much!
Nook Color with Honeycomb, now with the video editor too.
Woot!
Thank you again!
Ev
I know this is the Xoom forum but anyone with a transformer want to give the APK a shot? Been interested to see how this app works on other honeycomb devices.
Does it have a .odex file it it too? This doesn't come installed on the Euro XOOM 3G. I tried copying it to /system/app and chmod 775 but no go.
Macbots drool as I XOOM through the Galaxy to my hearts Desire on the back of a Droid
has anyone got this working on a Xoom 3G Euro yet?
wont install on G slate
doesn't work with acer iconia a500 either.
it won't install without the .odex file, and even with it, it doesn't seem to work. Thread is a waste of time since it doesn't provide the "full" application. You think these .odex files are there to look pretty? They contain a lot of the application's functional code.
alias_neo said:
it won't install without the .odex file, and even with it, it doesn't seem to work. Thread is a waste of time since it doesn't provide the "full" application. You think these .odex files are there to look pretty? They contain a lot of the application's functional code.
Click to expand...
Click to collapse
What steps must be taken to get this to work? I tried it on my transformer but no go; not surprising after reading your comment. Why the hell wasn't this included?
Well you could argue two things, first the op didn't explicitly ask for the odex, or the person who posted it isn't familiar with how this works.
Anyway, odex files contain the pltfirm specific compiled code for an application it is moved into a seperate file for the sake of performance.
I have experimented with this and it seems there are some certificates or something, possibly even libs missing. It wont install so forget about it for now until it can be deodexed.
I look forward to that day and think it's a shame rest of us didn't get it
Sent from my HTC Desire using Tapatalk
Here you go, give this a shot.
Note: do not install. Push to /system/app
Works fine. Thank you!
sangreal06 said:
Here you go, give this a shot.
Note: do not install. Push to /system/app
Click to expand...
Click to collapse
how do you push to system/ app. i am on non rooted transformer
Pretty sure you need root to modify /system partition, sorry.
The app needs to be in /system or it won't have proper permissions and will FC
sangreal06 said:
Pretty sure you need root to modify /system partition, sorry.
The app needs to be in /system or it won't have proper permissions and will FC
Click to expand...
Click to collapse
oh, too bad, then i will wait maybesmeon will modify it and fi it for us non rooted
Works great on transformer
Sent from my Transformer TF101 using Tapatalk
ayman07 said:
Works great on transformer
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Is yours rooted
Sent from my DROIDX using XDA Premium App
Glad it is working for some of you guys
it launches, but when I try to add a movieclip (3gp/mp4) or picture it tells me "cannot add this file to project" on my transformer.
I've modded the leaked flash 10.2 to work with Hulu.
http://www.multiupload.com/HUTOFN3O0A
Uninstall the other version before installing this.
You'll need to change your useragent to desktop as well in the browser. (see here).
This is largely untested, but should work. Let me know if you have any problems.
I'll try it. Thanks.
Just tried it and it looks like it works. Didn't get to watch anything due to being on vzw 3g and hulu said it is not fast enough for ads. Thanks tho!
As soon as I get to Wi-Fi I will reply back here on if it works successfully.
Sent from my Xoom using XDA Premium App
It works great. For better performing video playback on hulu, go to http://www.hulu.com/widget/player instead of the main site.
Adam B. said:
... You'll need to change your useragent to desktop as well in the browser. (see here).
Click to expand...
Click to collapse
woah.... stupid question, does this work on Netflix?
Doesn't work for me... says not available for my device
Sent from my Xoom using Tapatalk
No it doesn't work for netflix
Sent from my Xoom using XDA Premium App
May I ask what you modifie /changed to get it to work
Sent from my Xoom using XDA Premium App
Modified one doesn't work for me. I can't see any flash content at all. Tried many things including uninstall, reinstall, clear browser data, restarts between etc, nothing I can do to make it work. Back to the original version.
xRepinsSporx said:
May I ask what you modifie /changed to get it to work
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
You have to change libflashplayer.so to report WIN instead of AND. You can do this with a hex editor. I also tried to make a modified apk, which I posted in the other thread but I found it only works if you install the official flash player first, and it only works until you reboot and then you have to install both again. I haven't tested the one in this thread so I don't know if it has the same issue.
I think if you have root you can just replace libflashplayer.so and be good to go though. See my comments here: http://forum.xda-developers.com/showpost.php?p=12038563&postcount=74
xRepinsSporx said:
May I ask what you modifie /changed to get it to work
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
I hex edited the flash library to change the user agent.
sangreal06 said:
You have to change libflashplayer.so to report WIN instead of AND. You can do this with a hex editor. I also tried to make a modified apk, which I posted in the other thread but I found it only works if you install the official flash player first, and it only works until you reboot and then you have to install both again. I haven't tested the one in this thread so I don't know if it has the same issue.
I think if you have root you can just replace libflashplayer.so and be good to go though. See my comments here: http://forum.xda-developers.com/showpost.php?p=12038563&postcount=74
Click to expand...
Click to collapse
Didn't realize someone had already done this, sorry!
hulu is a no go for me. just a bank screen where the flash is suppose to be playing.
worked for me but very choppy... Anyone get it to play smooth.
Also for those that its not working did you do the about:debug then settings desktop
I'm guessing you need to be in America for this?
Sent from my Xoom using XDA App
ChongoDroid said:
I'm guessing you need to be in America for this?
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
For Hulu? Yeah.
daddymacbuff said:
worked for me but very choppy... Anyone get it to play smooth.
Also for those that its not working did you do the about:debug then settings desktop
Click to expand...
Click to collapse
Yes, my user agent is set to desktop
zeavott said:
woah.... stupid question, does this work on Netflix?
Click to expand...
Click to collapse
Definitely a stupid question, Netflix runs on Silverlight...
nswenson said:
Modified one doesn't work for me. I can't see any flash content at all. Tried many things including uninstall, reinstall, clear browser data, restarts between etc, nothing I can do to make it work. Back to the original version.
Click to expand...
Click to collapse
Agreed same with me. I really wanted the modded flash to work but it doesn't for me either.
Elysian893 said:
Definitely a stupid question, Netflix runs on Silverlight...
Click to expand...
Click to collapse
Lol at least I didn't try to.fool anyone
As the AA site is still a WIP I will post here.
http://forum.xda-developers.com/attachment.php?attachmentid=632040&d=1308669292
Terminal Emulator/ADB Shell
$ su
# sensorcalibutil_yamaha
Follow directions.
Sent from my SPH-D700 using XDA App
For terminal it's
Su
System/bin/sensorcalibutil_yamaha
*or has it changed location since in ginger?*
Sent from my Epix 4G using XDA
Shoulon said:
For terminal it's
Su
System/bin/sensorcalibutil_yamaha
*or has it changed location since in ginger?*
Sent from my Epix 4G using XDA
Click to expand...
Click to collapse
It's changed in gingerbread.
Damn samsuck. need to question devs less eh =/
Sent from my Epix 4G using XDA
Shoulon said:
For terminal it's
Su
System/bin/sensorcalibutil_yamaha
*or has it changed location since in ginger?*
Sent from my Epix 4G using XDA
Click to expand...
Click to collapse
I have NEVER had to type system/bin before sensorcalibutil_yahama.
What does the zip file do?
Flashable zip?
*edit* nevermind I just peeked inside the zip.
For post above me, you flash through clockwork, and it flashes the calibration tool needed.
And btw its no included at all in gb, hence the need for this to be flashed
Sent from my SPH-D700
ran the calibration tool and it made no difference
No difference here either. Doesn't really bother me much tho.
Sent from my SPH-D700 using XDA App
Guess they thought gingerbreads version would work? So no difference huh?
Well thanks for getting this still Marcusant.
Just a thought, but wouldn't you need the other files that go with it? If i knew how to compile one of these zips, i would edit it and see if it worked >.>
/system/bin/sensorcalibutil_yamaha
/system/bin/sensorserver_yamaha
/system/bin/sensorstatutil_yamaha
hoffman1984 said:
Just a thought, but wouldn't you need the other files that go with it? If i knew how to compile one of these zips, i would edit it and see if it worked >.>
/system/bin/sensorcalibutil_yamaha
/system/bin/sensorserver_yamaha
/system/bin/sensorstatutil_yamaha
Click to expand...
Click to collapse
I would think you could just download a rom open it up with winrar and copy it out and post it with credits and permission of coarse, just to be safe
Well the reason i mentioned the 3 files, is that sensorcalibutil_yamaha was the only file that's flashed in this fix. Hence why it might not work? Again, i know nothing of fixes and development on Android, but from a programming perspective, i would say they're dependent files...
Who knows... If anyone feels like taking the time to re-create this fix with the files listed, it just may work. =\
hoffman1984 said:
Well the reason i mentioned the 3 files, is that sensorcalibutil_yamaha was the only file that's flashed in this fix. Hence why it might not work? Again, i know nothing of fixes and development on Android, but from a programming perspective, i would say they're dependent files...
Who knows... If anyone feels like taking the time to re-create this fix with the files listed, it just may work. =\
Click to expand...
Click to collapse
Drag them into the zip and post it. Trust me, Marcusant probably doesn't mind the whole permission thing.
Sent from my SPH-D700 using XDA App
I did all that... edited the update script... and it bricked my phone. I'll hve to do my research, cause I have a feeling that it's not as easy as just dropping files into a zip
Sent from my SPH-D700 using XDA App
hoffman1984 said:
I did all that... edited the update script... and it bricked my phone. I'll hve to do my research, cause I have a feeling that it's not as easy as just dropping files into a zip
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Don't edit the script...
Sent from my SPH-D700 using XDA App
flipblind said:
Drag them into the zip and post it. Trust me, Marcusant probably doesn't mind the whole permission thing.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Kick in the nuts? lol
flipblind said:
Don't edit the script...
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
May I ask why?
Sent from my SPH-D700 using XDA App