Database Develop

Help! Cant boot g1 after "danger spl"

I updated my phone's SPL to "Danger SPL" and now my phone wont turn back on! I press power and the black Android screen with the little green android next to it comes up but wont boot my phone! The only thing I can do is get the white screen with the 3 android's skateboarding by pressing camera + power.
Ontop of that, I had tried to update my phone's recovery image too, and I erased the old one and now it would let me upload the NEW one! So not only do I have NO PHONE but NO RECOVERY either!
What do I do!? HELP!

can you get into fastboot? (back+power)
if you can, get adb running and flash your recovery image with fastboot

you are gonna have to fast boot in the screen with the three androids on it, either a rom or a recovery
guess you betta learn how to use adb

Yea I can get into fastboot, thats the ONLY thing I can get into. How do I flash my recovery image?

http://forum.xda-developers.com/showthread.php?t=566669

boot your phone into fastboot. plug in your usb cable to your pc. this should change the fastboot icon on the screen to fastboot usb. from there, load up adb on your pc and make sure you have the fastboot option available by typing fastboot devices. it should list your phone. once that is good, type:
fastboot flash recovery and the correct name of your recovery file.
for example:
fastboot flash recovery recovery-RA-dream-v1.2.3.img
**also note...put the recovery image in your android sdk\tools folder**
this should give you a recovery to boot into.
if you dont have adb on your pc, read this and follow the instructions
http://forum.xda-developers.com/showthread.php?t=532719

I did that already, it wont work.
C:\Android>fastboot flash recovery recovery123.img
error: cannot load 'recovery123.img'

i am gonna be the one to ask this question but did you put .s between 123 like 1.2.3.

you need to be in the tools directory, not the android directory.
c:\Android\tools>fastboot flash recovery recovery-RA-dream-v1.2.3.img

and you need the recovery file IN your tools folder for it to be found as well.

No I didn't put .'s between each number I renamed my file recovery123.img so thats the way I put it in.

ok, so go to the correct directory and input what you had the first time, WITH the file IN that same folder. and then report back.

i justed rename my recovery the shortest way i can like for amon ra"s i just put amon, less typing is always better

It says C:\Android\tools is not recognized as an internal or external command, operable program or batch file.

from your c:\> prompt type this:
cd c:\android\tools
(this is assuming you have the android sdk in the c:\android folder on your pc)
if it is saying its not a folder, then that is not where you installed the android sdk.

knowfear said:
and you need the recovery file IN your tools folder for it to be found as well.
Click to expand...
Click to collapse
This is not true. You can have it anywhere as long as you can cd to it and you have your fastboot.exe in the system32 folder.
Look... this is so easy I'm wondering why this has gone on for more than 1 page.
First thing is first. I'm betting that you don't have the new ADB driver for the Danger SPL.
If you refer to this page:
http://sapphire-port-dream.googlecode.com/
it states:
If you use the above SPL you will need new drivers for Windows. They are located here.
Click to expand...
Click to collapse
Then put your fastboot.exe in c:\windows\system32 directory.
Whatever recovery file you're trying to use rename it to "recovery.img" and put it on C:\ then open command prompt (start > run > cmd > enter)
cd c:\
fastboot flash recovery recovery.img
and it should show a progress bar in the top right corner.
While the dos screen shows 'sending' and then 'writing'.
After you see ...done a second time then type:
fastboot reboot
and it should reboot just fine... but you may need to do that "3 finger solute" (talk, end, menu) while holding the camera button down to get into your recovery. You should be able to flash your rom. Just make sure the rom doesn't have a radio update (unless it's the 2.22.19.26I).

what he said.
Binary100100 said:
This is not true. You can have it anywhere as long as you can cd to it and you have your fastboot.exe in the system32 folder.
Look... this is so easy I'm wondering why this has gone on for more than 1 page.
First thing is first. I'm betting that you don't have the new ADB driver for the Danger SPL.
If you refer to this page:
http://sapphire-port-dream.googlecode.com/
it states:
Then put your fastboot.exe in c:\windows\system32 directory.
Whatever recovery file you're trying to use rename it to "recovery.img" and put it on C:\ then open command prompt (start > run > cmd > enter)
cd c:\
fastboot flash recovery recovery.img
and it should show a progress bar in the top right corner.
While the dos screen shows 'sending' and then 'writing'.
After you see ...done a second time then type:
fastboot reboot
and it should reboot just fine... but you may need to do that "3 finger solute" (talk, end, menu) while holding the camera button down to get into your recovery. You should be able to flash your rom. Just make sure the rom doesn't have a radio update (unless it's the 2.22.19.26I).
Click to expand...
Click to collapse
^just follow this step-by-step. You should be good to go.
Nice, succinct response binary.

innerspace said:
^just follow this step-by-step. You should be good to go.
Nice, succinct response binary.
Click to expand...
Click to collapse
No problem. I just hate it when something this simple drags onto multple pages. Call it a peev. So many people get intimidated by the "Danger SPL" because they don't want to risk bricking their phones. The odds of bricking your phone are extremely small if you follow directions and read everything. And sure the possibility of accomplishing this by different means exists. But when you try to tell someone to put this file in that folder and type in the full names of the files to include all the dots and dashes, it's going to get confusing and intimidating and thus these posts keep popping up.
If someone follows those very short and simple directions they shouldn't have any problems. Granted that "**** happens" and things don't always go as they should. So in that case, search for your answer. If you've searched on XDA then search Google. Out of the MILLIONS of G1's that have been sold, I am fairly certain that someone out there has had a similar problem. If not then you and your phone are literally "1 in a million" (technically it was 1 in 1.5 million a year ago so you can bet that it's well over 2 if not 3 million by now). And if you really fall into that catagory then please post a new thread (in the appropriate catagory of course) .

well the good news is u didnt brick ur phone but try a enter adb and do a nadroid back up if u hav 1 that will bring u back 2 the way u want it

either flash a nadroid or flash dreaming.nbh....i had the same problem and a nadroid worked just fine

How 2 - ADB, Rooting(reflash), Unrooting, Nandroid, Remove/Install App, roms, kernels

So far, this is going to be a guide for noobs. Please read through this, and ask any questions that you have. This has been compiled from different guides around XDA, and information has been stripped that does not relate to our phones. More will be put up here when I find it, and all credit will be provided. This will be from 'duh' to 'didn't know that'. The idea is to provide a beginning to end explanation: Stock Incredible to Rooted with custom Rom.
Topics so far - ADB, Rooting (reflash), Unrooting, Nandroid, Remove/Install Apps, roms, kernels...
I'M NOT RESPONSIBLE IF YOU BRICK YOUR PHONE DOING ANY OF THIS.... REGARDLESS OF WHY. Yadda, yadda, yadda...
**********At this point, I'm going to ask that you uninstall HTC Sync. Also, please uninstall HTC Driver... (whatever it's called) Nobody likes them (really though, it will mess up a lot of things. You can install them later when all this is done).**********
1) Setting up ADB
ADB stands for Android Development Bridge. It is used by Android developers for programming. For us, it is used to hack into our phones . For our purposes, just know that it is like the cmd (command prompt) that allows us to send commands to our phone. This is extremely useful when we're in the custom recovery
Download the Android SDK from Google: http://developer.android.com/sdk/index.html
Unzip to your desktop
Take the "android-sdk-_**-windows" folder and move it to the root of your hard drive (C:\)
** will change, it is revision of SDK, like "r6"
****The below is not necessary, but is useful sometimes if you just want to run "adb shell" from anywhere without going into the sdk directory****
Right click on My Computer and click properties
Select the Advanced Tab or Advanced System Setting (Vista/Windows 7)
Select Environment Variables...
Press New
For Variable Name type: adb
For Variable Value type: C:\android-sdk-_**-windows\tools
****End of the "This is not necessary thing****
Now, we get USB drivers to work. Some use HTC Sync for drivers, however HTC Sync does not like to play nice with the reflash tool (later on this), so we will use the generic google USB drivers.
1. Run SDK Setup.exe
2. If it gives you any error go to settings and click on "Force http//....."
3. Select usb driver package, let it download and install
4. Some say the below step is not needed, but I did this so I'm posting it
Go to tools folder, and edit "android_winusb.inf" (you can do this by opening it via wordpad). Add the following at the end of the [Google.NTx86] and [Google.NTamd64] blocks:
;HTC Incredible
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C9E&MI_01
%SingleBootLoaderInterface% = USB_Install, USB\VID_0BB4&PID_0C94
Save the file and exit.
5). Plug your phone into PC, when windows asks to install drivers for new found hardware, point the New Hardware Found wizaed to android_winusb.inf that you just edited.
============================================================
2) Preparing your phone for ADB
Go to Settings on your phone
Select Applications
Select Development
Make sure 'USB Debugging' is checked
============================================================
3) Check if your phone is detected by ADB
Open up Command Prompt (Go to run, type in cmd, press enter)
Type in:
cd C:\**your sdk name**\tools (Press Enter)
adb devices (Enter) You should see your device listed
adb shell (Enter) you should see $ in the next line
**After you obtain root**
su (Enter) you should see # in the next line if you are already rooted
**you may need to allow adb shell to run as root. Look at the phone and see if Superuser.apk is asking for your permission to allow adb root access. Click on "Remeber my selection" and select yes.
Now you are all set to run adb commands as root or as a regular user
**Note: for a list of commands that you can type using adb type "adb" in cmd
All Credit for Topics 1 - 3 go to user XDA member nephron. I mostly copied all of his guide, but updated some information on it to make sense for our phones. Also, removed some stuff I didn't see necessary. Please go to the original thread for the G1: http://forum.xda-developers.com/showthread.php?t=532719&highlight=nandroid+guide for a list of further Credits, and for information I've left out. If you like this thread, please donate to HIM
============================================================
4) Rooting your phone - READ THIS WHOLE SECTION BEFORE GOING TO ANY EXTERNAL LINKS PLEASE. At this point, running the UnrEVOked reflash3 tool will root your phone and install a custom recovery. To try to make it really easy to understand, recovery allows you to access your phone to make PERMANENT changes (something we can't do while booted yet), flash custom roms, and save your sorry little @$$ if you do something that you weren't supposed to
Ok, at this point, I'm going to ASSUME that you don't have HTC SYNC installed (or uninstalled it), and that you have the Google USB drivers installed (i.e. you read at least some of this post). The first thing we're going to do is:
1) Read this: http://forum.xda-developers.com/showpost.php?p=6875912&postcount=1
2) If you read #1, you already went here: http://www.unrevoked.com/rootwiki/doku.php?id=public:windows_hboot_driver_install
and downloaded the MODIFIED (i.e. changed, not the same, DON'T SKIP THIS STEP) driver and installed it
3) If you read #1, you already downloaded the reflash tool executable
4) If you read #1, you've already done #2, and 3, and this is just a worthless step of me explaining how important it is that you did #1
5) Lets do this. #1,2,3 and 4 were "get ready" steps. By now, you installed the modified driver, went to the webpage and downloaded the UnrEVOked3 reflash tool. HTC sync is also uninstalled. Plug in your phone (normally booted) to your pc and select "Charge Only" when asked how to connect to PC, and click on "remember my selection". Click Done.
6) Unplug Phone from PC.
6a) If you have double twist installed, at this time open the task manager on your pc, and kill doubletwist.devicehelpder....
7) Run the "reflash_package" executable that you just downloaded. Notice the path that it lists and click "install". This will unzip "reflash.exe" and a bunch of other stuff that is needed to the directory that you just noted. Go to this directory (usually the same one where the executable you just ran is) and run "reflash.exe"
8) Plug in your phone.
9) When the program is finished, you should see koush's clockworkmod recovery on your phone's screen and reflash will say that it's done. Congrats, you have root and a new recovery.
If something went wrong, and you're not on koush's recovery and reflash says it's done, don't worry, just re-run reflash. You can run it as many times as necessary. It will not hurt anything AT THIS TIME (this may change later)
10) Koush's recover works a little differently:
a) Vol+ and - scroll up / down
b) the Power button work as a "Back" button, and will turn off screen if you're at the root of the menu. If your screen goes blank, don't read, just hit Power again
c) To make a selection, click the optical trackpad
11) Reboot your phone by highlighting the selection and choosing it
For the most part, these instructions were written from memory, but all credit goes to UnrEVOked, Shadowmite, and anyone that they've given credit to in original links.
============================================================
5) Unrooting - I didn't want to re-invent the wheel, so I'm posting an external link:
http://androidforums.com/all-things...ideo-howto-unroot-incredible-downgrading.html
Just follow the instructions. Credit goes to the OP. If this link ever goes to a 404, pm me and I will find another link with instructions and update this. Also, if you don't understand something, just ask in this thread, someone will answer (maybe even me ).
============================================================
6) Whats is a Nandroid Backup?
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
Nandroid Backup is a tool allowing your Incredible that has koush ClokworkMod Recovery to create a full system backup and restore it, which, when flashing and testing different roms can be very useful.
A) Creating a Backup using Nandroid
Boot up your phone in recovery (Turn off, then turn on while holding Vol- and Power. Press Vol- once to highlight recovery, hit Power once to go into it)
You will now see your new koush recovery
Scroll down (Vol -) to "nandroid" and select it (press the optical button in)
"Backup" will be highlighted. select it
Let it work, it might take a while for a full system backup
Once its done, your backup is complete and is saved on your sdcard in the "clockworkmod" folder. Normally it's stored in the "nandroid" folder, however our Recovery does things a little differently.
B) Recovering to Your Nandroid Backup
Make sure u made a backup and its in the clockworkmod folder on your sdcard
Boot up your phone in recovery (Explained Above)
Go into "nandroid" in the recovery (also explained above)
Select "restore backup" and select from the backups you have (if you have multiple) that you want to restore; this will do a simple, "restore all" of your latest nandroid backup
:OR:
Select "Advanced Restore", choose from the backups that you have on your SD card, and then what you want to restore. You can individually restore "system", "data", "cache", etc....
In "Advanced Restore", i have not seen a way to restore multiple options (cashe AND system, etc...) Koush, am I missing something?
Let it work
Once its done, restore more options through the Advanced Restore menu, or reboot your phone and your selections will now be restored!
============================================================
7) Remove Apps
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Go into Clockworkmod Recovery (With phone turned off, Vol - + Power, then Vol - to select recovery, then hit Power)
2) Select "partitions" from menu, then select "mount sytem" You can also "mount sdcard" if you want to back apps up to sdcard
3) Connect Phone to PC
3a) Open a command prompt and navigate to your sdk\tools directory
3b) Type: adb remount (it shoud return successful)
4) Open Adb Shell on your pc (Type: adb shell)
It should automatically show #, otherwise type "su"
Type:
cd /system/app (enter)
5)Type ls (this will show you all of the stuff in the /system/app directory)
6) To "delete" apps, type the following:
/system/bin/mv Your_APP.apk Your_APP.apk.bak (i.e. CityID.apk CityID.apk.bak). If you want to clear up space on your internal storage for whatever reason, you can replace Your_APP.apk.bak with /sdcard/Your_APP.apk.bak (this will move the app to the root of your SD Card instead of just change it's name)
If you don't get errors, you're done.
*This does not delete apps, but changes their file type so they will not show up as an app, in case you want to get them back at any time later you still have them and don't have to frantically post threads on XDA asking for them.
============================================================
8) Install Apps to /system/app
**Using Koush Recovery:
Power takes you "bacK" in menu's. On root of the menu, it will turn on/off screen. Hit Power again to turn it back on.
Vol+/Vol- lets you scroll up/down through menus
Pushing optical trackpad in makes your selection
1) Place your app you want to install into the root of your sd card (this is easiest)
2) Go into Clockworkmod Recovery (Explained in 7)
3) Mount system and sdcard under partitions (Explained in 7)
4) Connect Phone to PC
4a) adb remount in command prompt (should sow successful) (again, in 7)
5) Open Adb Shell on your PC
6)
IF NOT at #, type "su" to go from $ to #.
Type:
/system/bin/mv /sdcard/Your_App_Name.apk /system/app/Your_App_Name.apk
7) If you don't get errors, you're done. You can unplug phone, and reboot
============================================================
9) Flashing Custom Roms
Download a ROM that you want to try. One of the roms from here are a good starting point: http://inc.sodpit.com/. They are mostly stable might get a few random reboots.
Steps:
1. Download Rom of your choice
1a. Right now, there might be two ROM types, a nandroid backup and an update.zip type file. For right now, I recommend sticking with the update.zip kind. These instructions are meant for it, but I just want you to make sure you know which type it is before you try to flash it.
2. Copy and Paste the downloaded file onto sdcard. Make sure it is not in any directory's of SD card, just on the sdcard (the "root" of it).
3. Verify it's there using Astro or some other File Manager just to be safe.
4. Download and Run Titanium Backup from the Market if you haven't already. (If you don't have it, get it, it's must have for root users.)
a. Select Menu, Batch, Backup user apps. (in Titanium Backup)
b. let it run, this will take some time.
5. When that's done open your command prompt, navigate to your sdk\tools directory, and type "adb reboot recovery" (Not within adb shell, but in command prompt in that directory. I'm not going to explain how to do this because it's already explained above. Also, if you're flashing roms then you're already familiar with it, or maybe you shouldn't be flashing roms ).
6. Do "Wipe data/factory reset" and "wipe cache partition" in Recovery **This WILL WIPE your phone**
7. Select "install zip from sdcard", then select "choose zip from sdcard", then select the name of the zip you want to install.
8. When that's done reboot your phone, once your done setting up all the settings, download titanium backup from the market again, and set that up.
9. In Titanium, Select Menu, Batch, Restore User apps.
After that's done you'll have all your apps that you had before, data included, with a fresh new rom to try out. Hope this helps!!
All credit for these instructions goes to tcbert2010, they were suggested to me, and I liked them. I modified them a BIT, so they make more sense to me and hopefully to you. See post #2 in Original Thread = http://forum.xda-developers.com/showthread.php?p=6953608#post6953608
============================================================
10) Installing custom kernels
I'm only mentioning Hydra's kernels. I'm running the Undervolted, NOT overclocked kernel with wireless N to preserve my battery to get more life out of it
**Taken from website's FAQ**
Q: So how do I install the kernel?
A: First step is to either download the kernel zip file straight to your phone, or download it onto your computer and put it on the sdcard of your phone. Next you turn the phone off hold volume down and power at the same time. When the phone is in HBOOT wait a few seconds for it to initialize then hit volume down once and then power to boot into Clockwork recovery. Once in clockwork recovery you want to select "Install zip from sdcard", then "Choose zip from sdcard". You will now see a listing of files on your sdcard select the kernel zip you downloaded, or if you downloaded strait to your phone go to the Downloads folder and select the kernel zip file. The kernel will now install to the phone and once it's done it will say install complete. Now you can hit the power button once to return to main menu and select "reboot system now" . Your phone will now reboot with the new kernel.
***
Go to: http://hydrakernel.net/ to download the kernels
Please read: http://hydrakernel.net/faq.htm to educate yourself. It's worth it.
Credit to EJHEART for the wonderful kernels! Where are my 2.2 kernels EJ ?
============================================================
Again, if you have suggestions, requests, or whatever please post or PM me.
PM Me if I missed giving someone credit. PLEASE!!!

reserved
reserved for future.

Reserved
reserved for future

Great thread topic... reserved for future use

Updated
Updated with Reflash instructions.

dreamersipaq said:
Help I'm stuck at waiting for system to settle
check these common issues:
- You switched your driver to the one from this post? It's NOT identical to the SDK one.
- You don't have any usb applications that might be taking focus while we are working with the phone right?
- Is the SD card present in the device?
- You did give su permenent access when you allowed it in superuser right?
More to come...
Click to expand...
Click to collapse
Good start, iPaq! I just want to plug Linux AGAIN. I had zero problems using reflash for linux and using Gparted in Ubuntu/Debian/Linux Mint mint means one can do all kinds of things that will become helpful very soon if not already (e.g., manipulate ext and swap partitions on the sdacard!). Aside from linux being Android's native file system, using a Linux distro just makes 110% good sense if you plan to do any developing for the DI/Android. Why poeple struggle so much with Windows when Linux is free is beyond me
2 cents deposited!

Additional items to add
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod

Great topic
Sent from my ADR6300 using XDA App

...
jdmba said:
1) After I have rooted and reflashed - How do I flash new ROMs
2) After I have rooted and reflashed - Is there an easier way to get back in and get rid of CityID, etc?
3) How do I update to a later version of ClockworkMod
Click to expand...
Click to collapse
1) - Will update soon
2) - I BELIEVE that this works:
1) Go into Clockworkmod Recovery
2) Mount Internal Storage under partitions
3) Connect Phone to PC
4) Open Adb Shell on your pc
Type:
su (will change to #)
cd /system/app
mv CityID.apk CityID.apk.bak
you're done.
Not in front of my phone at this sec, but if mv does not work, try
busybox mv CityID.apk CityID.apk.bak or
/system/bin/mv CityID.apk CityID.apk.bak
*This does not delete it, but changes the file type so it will not show up as an add, in case you want to get it back at any time later.
If I'm wrong please correct me.
3) The easiest way to update recovery at this time is through Koush's Rom Manager. However, at this time I've read somewhere that it's not persistent. Let's give this a few days.

Updated
First Post Updated.

here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?

qwho said:
here is my problem, apparently when I got root I didn't push superuser.apk as a system app correctly.
SO, I have root in the OS after each boot, once I install superuser.apk.
Problem is, I can't get back in recovery to fix this. I have gotten into recovery with ADB again (maybe twice in the 2000 times I have tried again), but when I get to the step where you do the update and push the zip file at the same time, it never works now. So I am unable to push the apk as a system file.
So, the unrevoked recovery flash fails because it doesn't have su rights when it gets to the os on reboot.
Anyone want to help me out?
Click to expand...
Click to collapse
Take this opportunity to flash up to HBOOT 79, wipe, and re-root. Start fresh. Re-reflash w/unrevoked2. Alles in Ordnung! At least, that solved all of my problems. Start with the big headache to avoid later headaches. Once you have a nandroid of a "proper" root, you'll never have to do the annoying initial root again.

So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?

qwho said:
So you can get HBOOT 79 how? by flashing the latest HTC rom RUU?
Click to expand...
Click to collapse
Exactly. Doing will wipe out all userdata, everything not stored online, on your card, or on internal disk. It's really the best way to go, to start fresh and remove all the little variable piecemeal rooting has placed in your path to date.

can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.

qwho said:
can you point me to the RUU you would use? I did some searching, here and at htc.com, and I couldn't find an RUU anywhere.
Click to expand...
Click to collapse
Just down this, run it in Windoze, and before it tries to flash (you don't need your DI connected!), go into your AppData/temp directory, find the ~142mb rom.zip file, rename it to PB31IMG.zip, put it on /sdcard root directory, boot into bootloader, let the card/file get picked up while holding down-volume, ok the flash, no need to ok the reboot, then boot into to recovery and proceed with adb shell/rooting process one

I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!

sanchagrins said:
I've been having some trouble with the nandroid step, and creating a backup. I've done everything listed prior to that with success, but when I load into recovery I don't see the option to create a nandroid backup. I have also dl'ed RomManager and have tried to create backups through that.
I also dl'ed the unrevoked reflash and tried running that, but that also fails. I'm not really sure what I'm doing wrong, so any help wold be appreciated!
Click to expand...
Click to collapse
Not sure what you mean. Go into Hboot, and select recovery. When Koush's recovery loads, use Vol- to highlight "nandroid". Click the optical button in, and you'll enter another menu. Select the first option, which should be highlighted by default, which should be "Create Backup" or "Backup Device" or something like that.
Let me know if that works.

When I go into recovery the only options I get are:
Reboot System now
Apply sdcard: update.zip
Wipe data/factory reset
Wipe Cache partition
----------------------------------
E:Can't open /cache/recovery/command
Click to expand...
Click to collapse
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?

sanchagrins said:
When I go into recovery the only options I get are:
I'm not seeing anything about nandroid backup. I'm assuming I'm either not doing something correctly (I'm currently not booting into recovery while running reflash.exe) or somehow the clockworkmod isn't correctly installed.
Any ideas? Or what other information could I give you to help better answer my question?
Click to expand...
Click to collapse
You can't install anything to recovery that will stick until you get root via procedure 1, then reflash with unrevoked 2. Sounds to me like you've gotten ahead of yourself

0028002 Not Allow

I want to root my g1.
i did this steps
1. Plug your USB cable into your computer and then plug your phone in.
2. Mount your SD card by sliding down the notification bar and selecting mount.
3. Go to My Computer and access your SD card.
4. BACKUP ANY FILES THAT YOU WANT ONTO YOUR COMPUTER. VERY IMPORTANT!
5. Go back to my computer and right click on the drive that is your sd card. Click format. Choose FAT32 from the drop down and hit the format button. This removes all data from your memory card.
6. Once the format is complete: drag and drop "DREAIMG.nbh & Update.zip files that you downloaded into the sd card. (DO NOT create a folder or anything, just put it right in the SD card)
7. Unmount your phone by going through the notification bar and then unplug your phone Turn your phone off. from your computer.
8. Press and hold the camera+end key until until you see a screen with colored bars, then let go. This is the bootloader. The screen will turn gray with blue writing on it.
But 0028002 Not Allow problem.
i need a help
sorry for my bad english
thanks

Because those instructions are very us centric.. and maybe a tad dated.
If you have a T-Mobile phone look up androot and installing a custom recovery (re-recovery) this won't require the downgrade and is thus easier/safer. Particular than flashing an out of region rom.
If its not T-Mobile more info on the phone will help.

i'm root my phone with universal androot 1.6.1
what's next ?
i want to cyanogen mod 6. (2.2 froyo)
phone info:
Model Number = T-Mobile G1
Firmware version = 1.6
Build number = DMD64

Well you are at a good point.. rooted and operating just need to break out of the T-Mobile system some to replace everything on the phone..
The following will give you an idea.. but please read it all carefully first or you may find yourself while probably not bricked without a functioning android install.
You will want the following
1) Download and install both the android SDK and fastboot http://developer.htc.com/adp.html#s2
2) Download the flash image tool http://cyanogen-files.carneeki.net/flash_image.zip
3) Download ra-recovery http://rapidshare.com/files/387558152/recovery-RA-dream-v1.7.0-cyan.img MD5Sum: 11ae63afee9813a9b76cb3f7fd5ac2ad
unzip flash_image.zip and put the resulting flash_image in the same place as recovery-RA-dream-v1.7.0-cyan.img
form your computers command line run the following (preferable from the same directory as flash_image and recovery-RA-dream-v1.7.0-cyan.img, some people find it easier that this also be the tools directory adb is contained in but if you are comfortable at the command line this is not needed)
Code:
adb push flash_image /data/local/flash_image
adb shell chmod 755 /data/local/flash_image
adb push recovery-RA-dream-v1.7.0-cyan.img /data/local/recovery-RA-dream-v1.7.0-cyan.img
adb shell
this will now place you on a command prompt on the phone continue:
Code:
su
flash_image recovery /data/local/recovery-RA-dream-v1.7.0-cyan.img
exit
exit
now power down the phone and turn on while holding down the home button you ought to now be in ra-recovery optionally run a nandroid backup and then you can continue to install 1.33.2003
After 1.33.2003 is installed you can either continue the instructions on that link to 1.33.2005 *OR* check out Custom MTD
Once all of that is done its off to http://wiki.cyanogenmod.com/index.php?title=Upgrading_from_CyanogenMod_4.2_to_CyanogenMod_5/6 to install the rom.

can i follow this guide from II) Flashing a Recovery Image ?
http://forum.xda-developers.com/showthread.php?t=727688
because i think its easier than your guide for me

Two things,
1) flashreq expects a root exploit that wont exist on your rom I'm unsure if it will fall back on using su for root
2) if you feel its easier you don't like or are confuses with installing the sdk/fastboot, while there may be ways around it (rom manager comes to mind) if you ever run into trouble in the future you will need it.. once you learn how it works some you will find it easier thank messing with the apk.. as for the shell commands they will be cut copy and paste..
3) I don't recommended rom manager because if something goes wrong and you find yourself without a rom or recovery you will have a hard time getting your phone to boot without a gold card (once the engineering spl is installed 1.33.2005 you can take that route)
--
As I said before your phone is still running the T-Mobile rom take your time and understand the process and options to installing the rom.

My english is bad
i dont understand this post.
what must i do to root my phone now ?

How To: Get back to stock 2.1, stock recovery and S-ON for an RMA

The other day my phone's touchscreen developed a dead spot. Verizon was kind enough to send me a "Like-New" replacement and requested that I return the old phone. The only problem with that was I had hacked the hell out of it and didn't want them to see what I did and charge me.
I had rooted the phone, installed Clockwork Recovery, set S-OFF with Unrevoked Forever, updated to the latest radio and installed all kinds of different ROMs before finally settling on CM6. Now I had to find a way to install either stock 2.1 or stock 2.2 with the correct radio for either one, flash back the stock recovery, and finally set the phone back to S-ON. If you find yourself in a similar situation, you'll probably want to read this instead of spending 6 hours pulling your hair out, like I did. Here's what I finally came up with:
STEP 1: Get ADB Running.
Make sure you have ADB up and running. If you're rooted with a custom ROM and you don't have ADB running you have more problems than I can help you with. If you use a Mac, see Step 1A below to make things a little easier when using ADB.
Step 1A: (Mac Users Only) Make Your Life Easier.
Let's add the android SDK tools folder to your .bash_profile. What does this do, you ask? It makes it so that you can run any ADB commands without having to be in your SDK Tools directory. How do we do this?
Open a terminal window. Type
Code:
nano ~/.bash_profile
This will open a text editor in the terminal and create a new text file in your home directory called .bash_profile, which will be invisible in the Finder.
Enter the following:
Code:
PATH=$PATH:/Applications/Utilities/android-sdk-mac_86/tools
export PATH
!!IMPORTANT!! I have my "android-sdk-mac_86/tools" folder inside my "Utilities" folder, which is inside the "Applications" folder. If you have your android sdk folder somewhere else you will have to change the above text to reflect the proper path to your folder.
Hit ctrl-x. Not cmd-x, ctrl-x.
The editor will ask you if you want to save changes. Press "Y".
It will ask you what you want the file name to be. Just press enter, as we've already named it .bash_profile.
Quit and re-open terminal.
You can now use any command in the SDK tools folder from any directory.
STEP 2: Install Fastboot.
Make sure you have the HTC Fastboot tool installed. If you don't, you can get it here: http://developer.htc.com/adp.html
Download it for your particular operating system.
Another tip for Mac users: Once you download and unzip it, rename it from "fastboot-mac" to just "fastboot", then place it in your SDK Tools directory.
STEP 3: Downgrade To 2.1 With Old Radio.
We now need to downgrade our radio and get back to stock 2.1. The best way I found to do this was explained in this thread: http://forum.xda-developers.com/showthread.php?t=757927
Download the zip and follow the instructions.
Hat tip to Berzerker7 for the write-up, and aiccucs for putting together the zip file in that thread.
The next step will be a little bit of backtracking, but it's mostly painless, and it still seems to be the easiest way to do this.
STEP 4: Set NAND To S-ON.
We now need to set the NAND to S-ON. Problem is, in step 3 we flashed the stock recovery back onto the phone. Not a huge issue.
First, go to unrevoked.com and download unrevoked3. Run it. This will re-root the phone and install Clockwork recovery. Once this is done, go here: http://unrevoked.com/rootwiki/doku.php/public/forever and download the unrevoked-forever S-ON Tool.
Copy this file to your SD card and rename it "update.zip"
You can do that with adb like this:
Code:
adb push /path/to/unrevoked-forever-son.zip /sdcard/update.zip
Reboot into recovery and use Clockwork to apply the patch, which will set the NAND back to S-ON.
STEP 5: Get The Phone To Accept Stock Recovery With S-ON
This was the biggest problem that I ran into. The phone would regurgitate every zip I found which contained a stock recovery when the phone was set S-ON. I finally found a way around that.
First, download this PB31IMG.zip file: http://d01.megashares.com/index.php?d01=CHoQD3B
This IMG file was posted by Diego Mejia, on a youtube video he uploaded. Thanks to Diego, his work was very helpful in this process.
Here's the catch: in order to apply this PB31IMG.zip, we need to downgrade HBOOT or we'll get an error, due to the fact that we had set S-ON in the previous step.
Here is a link to a post on androidforums.com with an attached zip file called "revert.zip": http://androidforums.com/incredible-all-things-root/123816-how-revert-back-earlier-version-hboot.html
Credit is due to adrynalyne for coming up with this process and posting the files, I just tweaked his instructions a bit to make them work for me.
Once the "revert.zip" file has been downloaded, follow adrynalyne's instructions on what to do with the files. Reposted below:
Boot the phone into Clockwork Recovery.
Go to partitions, and mount data.
Type the following commands in a terminal window:
Code:
adb push flash_image /data
adb push mtd0.img /data
adb shell
chmod 777 /data/flash_image
cd /data
flash_image misc mtd0.img
exit
adb reboot oem-78
Watch for your phone to reboot to a silver HTC logo.
Then type:
Code:
fastboot devices
Verify your device shows up/responds/etc.
Click to expand...
Click to collapse
If the "fastboot" command works you should see an "H" followed by a string of random numbers and letters. So far, so good.
STEP 6: Reapply Stock 2.1 With Stock Recovery.
Once you've run the "fastboot" command successfully, go ahead and pull the battery. Leave the phone off. Go back to the PB31IMG.zip you downloaded in step 5, and copy it to the root of your SD card. Put the SD card back in the phone and boot it into recovery. If you've done all this correctly, the phone should recognize the PB31IMG.zip as valid and ask if you want to apply it. Do so. This will reflash the stock 2.1 ROM with the stock recovery while the phone is set S-ON. You can now send your phone back to Verizon.
STEP 7: Profit.
--B

Hey Mods, any chance of a sticky?
--B

There's a much easier/faster way to do this:
Just S-ON before you downgrade a first time, and then flash_image misc right away. The PB31IMG will take and you'll be at 2.1 with a single RUU flash.

Berzerker7 said:
There's a much easier/faster way to do this:
Just S-ON before you downgrade a first time, and then flash_image misc right away. The PB31IMG will take and you'll be at 2.1 with a single RUU flash.
Click to expand...
Click to collapse
Interesting. I couldn't get RUU to jive for some reason and didn't happen upon the bit about the flash_image until I'd already gone around in circles for several hours. Cool if the shortcut works, though! Where was your info at one o'clock this afternoon when I needed it?
--B

xraystyle said:
Interesting. I couldn't get RUU to jive for some reason and didn't happen upon the bit about the flash_image until I'd already gone around in circles for several hours. Cool if the shortcut works, though! Where was your info at one o'clock this afternoon when I needed it?
--B
Click to expand...
Click to collapse
Not reading your topic. lol

I found it easier, to just since your rooted already, just put it to S-on, then run the stock RUU for 2.2. and your done in two steps. no need for all the codes.... I just did it, got my refurb yesterday,...

Thanks for the informative post! This will help a lot of people in the future.

[HOW-TO]Unlock, Root and install CWM step by step

This HOW-TO is meant for individuals who like to do things manually and see each process as they occur, versus using a toolkit. I prefer manually unlocking/rooting as I can confirm each step visually and I believe it makes for a more educational experience. Familiarity and confidence with fastboot/adb can be beneficial later on for restoring/troubleshooting/flashing etc down the road.
Unknown at this point if OTA updates will install after flashing CWM. There may be a check file in the OTA that could prevent installation if modified file structure is detected. I’ll edit when I confirm. At any rate, not really an issue as you can flash the OTA yourself as someone on XDA will most likely post it up, or you could re-flash the stock recovery using fastboot which you will now be comfortable with after using this guide! Additionally, if an OTA causes you to lose root you can revisit the appropriate steps to flash SuperSU again.
There are several ways to do these procedures, and I’ve certainly taken the long way on some of them. So by no means am I claiming this to the best or most efficient method, but my hopes are to make things a little more clear and simple based off some of the questions and challenges I’ve seen in a few threads.
This how-to was written for Windows and uses adb and fastboot for installation.
Please let me know of any corrections, additions or errors. Many thanks to the members and devs who made these files available.
1. Download all of the following files and place them in the same directory. I will note whether you need to extract them or not.
Download and extract platform-tools-v16.zip from here: (thanks to efrant)
http://forum.xda-developers.com/showthread.php?t=1626895
Download and extract [ADB/FB/APX Driver] Universal Naked Driver 0.72 from here:
http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1
Download SuperSU from here: (look for UPDATE-SuperSU-v1.25.zip or current version)
http://forum.xda-developers.com/showthread.php?t=1538053
Download ClockworkMod from here: (look for Galaxy Nexus 7, Download Recovery 6.0.3.1 or current version – Recommend non-Touch as of ver 6.0.10, some reported issues with the Touch version)
http://www.clockworkmod.com/rommanager/
2. Now we will install the drivers and verify they are working. If you cannot verify drivers are functioning in both normal boot and recovery you need to stop and figure out what you are doing wrong. Proceeding further would be pointless. If you are having trouble, visit the Naked Driver thread listed above or here: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735
a. Make sure you have USB debugging enabled on your Nexus: setttings ->develop options ->USB Debugging.
b. USB connect your Nexus to your Windows pc. If you get a notification for unknown/driver not found, look in Device Manager for the exclamation point, and right click for update driver software, then browse my computer, then point to where you saved and extracted the Universal Naked Driver folder. If you get a warning from Windows complaining the driver is not signed, hit ‘Install driver anyway’. After the driver installs, you should now have ‘Nexus 7’ listed under ‘Portable Devices’ with no exclamation point.
Now we will verify using adb. You will need to launch a command prompt from the directory you saved all the files from step 1 to. Easiest way is to navigate to the directory via file explorer, then hold down shift and the RIGHT mouse button, and select “Open command window from here”.
In the cmd prompt, type:
adb devices
You should get a response with your Nexus serial number. If not, stop. Drivers are not loaded, re-read above and visit threads mentioned, try again. You should see something like:
List of devices attached
945d3339495 device
if instead you see:
List of devices attached
945d3339495 offline
then most likely you need to look on your nexus for a notice to allow the connected computer permissions to use usb debugging. If you don't see a notice, disable/enable usb debugging in "Settings -> Developer options" and then you should get the prompt. You should select 'remember this computer', if not you will have to do it again upon reboot.
c. Now we need to reboot into the bootloader and load the drivers again. So type:
adb reboot bootloader
and your Nexus should reboot into the bootloader. My laptop found the driver on its own, note that in Device Manager it is now listed as ‘Android Device’ instead of under ‘Portable Devices’. If your system does not find the driver, follow the same steps as above to update your driver after you located the exclamation point in Device Manager.
Now we will verify that the driver is installed correctly while in the bootloader. Again from a command prompt opened from the directory where you saved all the files from step 1, type:
fastboot devices
You should get a response with your Nexus serial number. If not, stop. Drivers are not loaded, re-read above and visit threads mentioned, try again.
3. Perform device unlock. NOTE: !!!THIS WILL ERASE ALL YOUR USER DATA!!! Please backup accordingly.
Your Nexus should still be in the bootloader. Type:
fastboot oem unlock
Your Nexus will prompt you to accept. NOTE: !!!THIS WILL ERASE ALL YOUR USER DATA!!! After a short moment, the device should report unlocked under “lock state”. Reboot device by typing:
fastboot reboot
After rebooting, sign in, etc.
4. Copy over SuperSU . In windows explorer locate the UPDATE-SuperSU-v1.25.zip and copy it to your Nexus internal storage area. Don’t put it any of the folders, just dump it in there. Now reboot into the bootloader again by typing:
adb reboot bootloader
5. Flash CWM. Once in the bootloader type:
fastboot flash recovery recovery-clockwork-6.0.3.1-grouper.img
after you get ‘finished’ from the command window, reboot your Nexus into CWM recovery by navigating with the volume buttons to ‘recovery mode’, then press power button.
6. Root Nexus. Using the volume keys, navigate to ‘install zip from sdcard’ and hit the power button. Now select ‘choose zip from sdcard’ and hit the power button. Navigate down to UPDATE-SuperSU-v1.25.zip’ and hit the power button. Select ‘Yes’, hit power. Once done select ‘go back’, then ‘reboot system now’.
Congrats, you’ve unlocked and rooted your Nexus!
Now at this point CWM recovery may or may not still be present on your device. There have been mixed reports on whether it will ‘stick’ the first time you flash it. The stock ROM has a check file that will replace CWM with the stock recovery upon reboot. To determine if CWM is still present simply reboot into recovery and see if it is there. Type:
adb reboot recovery
Obviously if you see the droid with exclamation point CWM did not stick. If you have no need for CWM, and simply wanted root you could stop now. Wait a few minutes and your device will reboot on its own and you are all done.
However, if you desire CWM then proceed on.
7. Rename recovery-from-boot.p to prevent stock recovery re-installation. Your Nexus should be booted normally at this point.
a. Go to the Play store and install ES File Explorer File Manager. Under settings enable ‘up to root’, ‘root explorer’, and ’mount file system’.
b. Navigate to /system and rename:
recovery-from-boot.p
to
recovery-from-boot.bak
by long pressing and selecting ‘rename’. Note: Be careful while navigating your device with these options enabled, a typo or slip-up could cripple your device and require a restore. I suggest once this rename is competed to disable the above options to avoid any mistakes in future exploring.
8. Flash CWM again.
a. Reboot into bootloader by typing:
adb reboot bootloader
b. once in bootloader type:
fastboot flash recovery recovery-clockwork-6.0.3.1-grouper.img
c. reboot device by typing:
fastboot reboot
d. verify CWM stuck by rebooting into recovery:
adb reboot recovery
And that should be it!
Some additional notes: CWM does make notice on rebooting with a message ”ROM may flash stock recovery on reboot. Fix? This can not be undone”. I don’t know what CWM will do there, so I prefer to rename the recovery-from-boot file so that I could easily restore it if I wanted. But perhaps that is what CWM does, although the message persists even after I renamed the file. Maybe someone could clarify this.
Hope this helps some people out in enjoying this great device even more, thanks for reading.

4.1.2 and 4.2.1 updates...
Thought I would revisit the thread as we've had two updates since I wrote the above. I installed 4.1.2 OTA with no problems but as expected, I lost root and CWM.
Because I'm lazy, I didn't worry over it much and then 4.2.1 shows up and also installed perfectly. Finally got around to getting root back and here are the steps I used.
Notes:
* Need to make sure drivers are correctly installed. See first post.
* I never really used CWM so I elected not to permanently install it this time.
* This update is a brief synopsis of how I got root back. If the steps are not clear, review the first post as the procedure is very similar.
1.) Ensure USB debugging is still enabled. On 4.2.1 "Developers options" are hidden by default. To enable simply tap "Settings > About tablet > Build number" 7 times. Back out and "Developers options" should now be available. In my case USB debugging was still enabled.
2.) Download SuperSU v0.99 and CWM 6.0.1.9 from links in first post. I used non-touch version of CWM.
3.) Transfer SuperSU over to internal storage of your Nexus. Be sure you know where you dumped it.
4.) Reboot into bootloader: adb reboot bootloader
5.) Temporarily boot or permanently install CWM so we can install SuperSU zip.
for temp boot type: fastboot boot recovery-clockwork-6.0.1.9-grouper.img
for perm install type: fastboot flash recovery recovery-clockwork-6.0.1.9-grouper.img
6.) Once in CWM select:
a. install zip from sdcard
b. choose zip from sdcard
c. navigate to /0/ then wherever you put SuperSU
7.) Once finished back out and reboot system now. I selected "No" on allowing CWM to disable stock recovery. If you are only temp booting CWM then this likely won't matter either choice you make. If you perm flashed CWM then you may wish to choose 'Yes".
That should cover it. Thanks for reading, any questions or corrections be sure to let me know.

I have a question about this:
I rooted and installed CWM on my 4.2 N7, but now, then I try to install the 4.2.1 OTA update, I get this error:
Code:
assert failed: apply_patch_check("/system/lib/libweb rtc_audio_preprocessing.so", "bin_number", "big_number""),
E: error in /cache/jop40d-from-jop40c.zip
(Status 7)
It's wise to apply this if I already have a rooted+CWM N7?

Some root procedures, or third party apps like Titanium Pro can make changes to certain system files that will cause an official update to fail. In your case, it appears at least "rtc_audio_preprocessing.so" located in "/system/lib/libweb" has been altered.
The easiest solution is to flash the current factory image then root. You can find them here: https://developers.google.com/android/nexus/images#nakasi.
However, you will lose your data. So back up accordingly.
If that's not an option, you can try:
a.) figure out which app you have that caused the change, and see if it has a 'revert' option or if uninstalling will put the file(s) back to stock.
b.) find the unmodified contents of /system/app and /system/lib and replace yours. Needs to be from 4.2 in your case.
c.) find a modified manual update patch (either zip for CWM or .img for fastboot) that has been altered to ignore the integrity check.

Curious, just went looking for "rtc_audio_preprocessing.so" in a factory 4.2 system.img and can not locate it, or the lib/libweb directory. Perhaps a third party app made these additions and thus the integrity check is failing as the files are unknown/unaccounted for?
At any rate, I went ahead and sourced a 4.2 system.img and extracted the /app and /lib directories in case this helps you or anyone else searching along.
Extracted from: nakasi-jop40c-factory-6aabb391.tgz
https://dl.dropbox.com/u/34704640/sys_apps_dir.zip
https://dl.dropbox.com/u/34704640/sys_lib_dir.zip
https://dl.dropbox.com/u/34704640/sys_apps_dir.zip.md5
https://dl.dropbox.com/u/34704640/sys_lib_dir.zip.md5

so I factory-reseted my N7, but it didn't helped. I found the file /system/lib/libwebrtc_audio_preprocessing.so so I tried to replace it with the file you posted (thanks btw!), but while using a console (su, then cp file.so file.so.backup) I get the error saying it's a read-only system, so I can't replace that file
any other idea?
EDIT: So I was playing around with the N7 (although I can really remember, I think I formated /system ?):
So, yeah, I actually formated /system for some unknown reason and there is no OS to boot, so I'm downloading at 25 KBps (yes...I know) and I'll be installing the JOP40D version for the N7.

ah, so the file is actually:
/lib/libwebrtc_audio_preprocessing.so
not
/lib/libweb/rtc_audio_preprocessing.so
That makes a little more sense. On cp over the original file, as you discovered the /system partition needs to be remounted as writable before you would be able to make changes. You could easily accomplish this with one of the root file explorers from the market. I use "ES File Explorer" as its free. Then simply copy over your file.
Or if you prefer adb: mount -o remount rw /system
Regardless, you are starting over from scratch so no worries. One of the things I love about this device is the option to start fresh-from-factory with minimal fuss.

igot a question. im currently running or 4.2.1 (rooted/unlocked). i used wugsfresh to root and unlock my device. wugfresh uses TWR and i want to try CWM and remove the TWR, would it be possible? i want to try different roms like cyanogen and i think CWM would be a good option.TIA

cub0ne said:
igot a question. im currently running or 4.2.1 (rooted/unlocked). i used wugsfresh to root and unlock my device. wugfresh uses TWR and i want to try CWM and remove the TWR, would it be possible? i want to try different roms like cyanogen and i think CWM would be a good option.TIA
Click to expand...
Click to collapse
I am also on 4.2.1 unlocked and rooted with wugfresh toolkit. I downloaded CWM from the play store, the app can download the latest CWM recovery and flash it for you. That is what I did, All I have used CWM for is a nandroid backup, but have booted into recovery and wiped cache and fixed permission
Has anyone had issue is SuperSU and CWM running Fix Permissions in the CWM app? I get an error...

Thank you!
Thank you very much for the excellent guide, your explanations were very clear!
It was a lot of fun following it, and I am very happy for choosing this guide over the 'one-click' toolkits.

I'll give it a try
After trying a "all in one toolbox" to unlock and root I think I'll give this a shot. I got stuck at not being able to root and like your OP said, doing it manually would help with the learning curve.
Quick questions that has popped up is.
Do I lock my bootloader back to use your guide?
I've noticed drivers I have in device manager have different names. Does this mean there are dif drivers that do the same thing? Should i delete them and use the ones in the OP?

Late response, but I'll answer for future users following this thread...
Once your bootloader is unlocked by any means, no need to relock in order to follow this guide. We simply have to have it unlocked so we can gain root
Drivers are probably the most common issues people have in any instance of trying to interact with their device. While its not imperative that the names are the same, what is most important is that you can communicate with the device. There really isn't the right or wrong driver name, just that the driver works! Having said that, if you are wondering whether you have the correct drivers installed, simply follow the steps and attempt a "adb devices" or "fastboot devices" command depending on your device status as is outlined in the tutorial. If you do not have the appropriate response, then you need to stop and determine the issue.

Update after OTA 4.2.2
Lost root as expected, and followed procedure in post #2 to gain root back. Also updated OP file versions to current as of this post as they all worked successfully.
Only thing I would note: If you get a "offline" notice after trying 'adb devices', be sure to check your nexus for a notification to allow the connected computer access for USB debugging. If you don't see one, go to "Settings -> Developer options" and disable/enable USB debugging and it should pop up. I don't remember this behavior when I first wrote the tutorial, so it may be something new for 4.2.2. After reboot it will require approval again, so you may wish to select 'remember this computer'. I added this note in the OP as well in the appropriate step.