[Q] Flashing from an old rom - Galaxy S I9000 Q&A, Help & Troubleshooting

Hey guys,
My girlfriend owns a Galaxy S and a few months ago I flashed it from the stock firmware to Hamsters rom, I think when it flashed it from the stock software it changed the file system from RFS to some variant of EXT.
I'm looking at flashing it to MIUI now, but I just wanted to ensure there was no risk with the partition being a different file type than it might expect, I was also hoping to get some pointers on Odin etc.
I know these are pretty basic questions that I really should find out myself, but I don't have much time and as it's not my own phone I'm not overly experienced/ in the know. Anyway I hope somebody can shed some light on the matter and any help is *greatly* appreciated.

Convert the file system first to stock by downloading voodoo control in the market, untick the first ,2 bullets, then reboot. After that you can now flash your phone provided you follow the flashing instructions by your rom provider.
Sent from my GT-I9000 using XDA App

Depending on what lagfix you have, use the voodoo toggle/ext4 app/recovery menu to convert all to rfs, then find the ezbase 2 rom in dev.
Read All!
With ezbase 2 comes
A) ezodin
B) drivers
C) pit file
3x froyo files
3x gingerbread files
Full graphic walk through
As you are going to miui, you need froyo base
Follow instructions, flash froyo ezbase, flash miui(no idea of their flash procedure)
Ezodin is very user friendly, and the graphic walkthrough.....well if you mess up, then you really only got yourself to blame atb
Insanity cm 014/glitch

Ah, fantastic.
You guys are awesome.

Related

5 Rookie questions needing 5 answers please read!!!!

Hi guys,
Im thinking of flasing a custom rom using odin.
Im running stock froyo 2.2.
PDA: I9000XWJPA
PHONE: I9000XXJPP
CSC: I9000XEEJP4
My phone is rooted and lag fixed. I understand that i need to remove the lag fix before and flash.
I updated to this using the registry hack. My questions are as follows...
1) Can i flash a custom rom from stock 2.2 or do i need to firstly flash a kernal with recovery 2e and then flash a custom rom?
2) Am i right in thinking that the PDA is the right bit to be looking at i.e when people say this rom is usable with JPA / JPO etc. The phone and CSC are not important when flashing a custom rom ( but still needed obviously )
3) If by some miracle of god we ever do get 2.3 and i flash back to stock Froyo via odin using a rom from samfirmware.com, will kies recognise my phone? Or will i forever be destined to flash "unofficially" through odin.
4) Looking at the PDA etc given above can anybody recommend a good rom to flash with gingerbread theme and apps. ( i keep seeing Darky's rom popping up in conversations ) and also have a link to it if you would be so kind. Im not lazy but theres so many roms all over i want to make sure i get the right one.
5) Once i have recovery 2e can i flash future roms over the top using rom mananger by clockworkmods and not have to go through odin? Or how does that work?
If i could get some clear answers to the above that would be great.
Yes i am a newbie at this but i am confident that i understand the basics, its just a couple of things above that i want clearing up before i proceed.
I know how to use odin correctly. ( close kies first / make sure odin opened before plugging in phone etc. )
P.S Yes i have 3 button recovery and download mode.
Thank you for taking the time to read this and a big thank you to any body that takes the time to respond with help.
Any body that can help?
dude i feel your pain. i've rooted and installed custom roms on two other phones, most recent the HTC Desire Z. and it was quite a nightmare to just start off to know what the first step is, there are soo many different guides its hard to know which is what and what has now been superceeded by something else!
now i'm trying to get a custom rom on my galaxy S too, but really having a hard time understanding everything becuase guides and stuff are so different for different roms, gets confusing and dont know which one is for me!
my phone is already rooted, i have firmware 2.1-update1, i know i have voodoo lagfix somewhere installed. but my base band version is I9000XXJM4, which i hav'nt seen in any guide! where did you get your seperate PDA, PHONE, CSC info from?
sorry i could'nt help you and i justed added a bunch more questions to mix
also how did you manage to get Clockwork Recovery on your phone? i have recovery 2e atm. i downloaded Rom manager from the market and tried installing Clockwork rewcovery, but first it would not even download. then i tried next day and it downloaded it through rom manager. but i dont think it installed it. i went into recovery mode and then it tried to auto-install clockwork recovery in recovery mode! but it just hanged at zero status bar for like 20 mins. i turned the phone off and on, went back into recovery mode and it was still recovery 2e, how do i get clockwork recovery to flash as the recovery mode?
Type *#1234#into your dial pad and it will come up. If I'm right I believe that 2.1 is more simple to flash over than 2.2 which is the bit that's confusing me.
I believe that you would need to flash a new kernel with recovery 2e and then flash a new Rom over the top.
I'm a but confused though as to weather or not I would need to flash back to 2.1 and then do a couple more flashes to get the job done.
Can some one please clear this up.
Sent from my GT-I9000 using XDA App
1. You don't need to have 2.1 rom to flash, since you'll be able to do all the flashing using Odin and download mode. Just flash a kernel, using odin, that has clockworkmod integrated, and you'll be able to flash most roms and kernels with the clockworkmod.
Speemod kernel is a great kernel, and has clockworkmod included.
Link: http://forum.xda-developers.com/showthread.php?t=822756
2. PDA is the rom part. CSC is important when using stock roms. I think that custom roms have CSC included in them.
3. You'll always be able to flash with Kies by using the Kies Registry Hack or by flashing a stock rom through odin. Kies will recognise your phone even if you are on a custom rom, but I'm not sure if it'll flash your phone.
4. I prefer Docs Ultra Slim roms because it's light, and you can customize them however you want. Darky's rom is a good option if you want all the features of a stock rom, and more. I use a Gingerbread theme with Doc's rom.
Links,
Darky's: http://forum.xda-developers.com/showthread.php?t=814091
Doc's: http://forum.xda-developers.com/showthread.php?t=817703
Both can be installed through ClockWorkMod
5. I think I answered this already.
Thank you for clearing that up. Very helpful but unfortunately you now raised another question haha.
You said that I would always be able to flash through kies using the registry hack... but wasn't that disabled so the registry hack wouldn't work any more a couple of versions back on. 803 or whatever it is?
And you also said that kies would recognise my phone but might not flash it which if I'm reading it right.contradicts.what you said about always been able to flash through kies.
Thank you so much for previous post it was very helpful.
Sorry if I sound stupid for.asking so many questions but I want to make sure I have covered all the angles before I proceed.
Again thanks for taking the time to help.
Sent from my GT-I9000 using XDA App
By registry hack, I really meant the Kies Registry Patcher app found here: http://forum.xda-developers.com/showthread.php?t=835628
Works on all Kies versions at least for now.
Like the original registry hack, this using this app makes Kies think that you have a stock rom and as long as Kies thinks that you have a stock rom, it will flash your phone.
In the sentence where I said that Kies will recognise your phone but won't flash, I mean't that it wouldn't flash without the Registry Patcher.
Thank you sooooooo much for your help dude.
Sent from my GT-I9000 using XDA App

How to revert to stock kernel

I have a Bell SGS, GT-I9000m. I'm considering installing hardcore kernel only, i.e. no custom ROM. If later I want to revert to the stock kernel, how would I do that?
Thanks for your help.
Sent from my GT-I9000M using XDA App
I'm not quite sure if it is possible with the stock-kernel but if you can make a full backup (like with CWM) you could restore it later. But why do you want to get back to stock-kernel?
If the backup-possibility does not work you have to find the stock-kernel for downloading and flash it via Odin or you have to flash the whole stock-ROM with Odin.
Thanks for your answer. I can't make a Nandroid backup while I'm on stock (because I can't install CWM recovery because I'm on 3e stock recovery, not 2e)
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong? I guess I just wanted to know if it was possible.
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Sent from my GT-I9000M using XDA App
I should add, the site/repo question is for kernels and stock ROMs...
Thanks.
Sent from my GT-I9000M using XDA App
site1ca said:
I'm not sure why I would want to go back to stock... Maybe something goes terribly wrong?
Click to expand...
Click to collapse
Well, then just flash the whole stock-ROM and flash it (look at samnfirmware.com for firmwares).
site1ca said:
Last question: when you say I would have to find the stock kernel, is that just Google, or are there sites/repositories out there for this sort of thing?
Click to expand...
Click to collapse
Don't know if you'll find it anywhere cause nobody needs it.
Possible scenario
Alright, thanks for your help. I guess the one scenario that is bothering me is as follows:
1) Bell - FINALLY - releases their official Gingerbread update.
2) I've installed Hardcore kernel, which according to - http://forum.xda-developers.com/showthread.php?t=822756 - "works on all 2.2 and 2.2.1 ROMs".
3) Would I be able to install the Bell Gingerbread update with Hardcore kernel?
This is why I keep asking how I would revert from Hardcore because I obviously don't want to lock myself out of Bell updates forever.
It doesn't matter which kernel you are using when you are flashing with Odin. And Bell releases the updates later than Samsung, so you'd have the advantage of getting updates earlier with a 'free' firmware.
One solution to flash back the stock kernel is to extract the zImage (the kernel) from the stock rom and flash that with Odin or Heimdall.
But as far as I know having a custom kernel would not cause problems with installing a stock upgrade.
Done
I've installed Hardcore's kernel. Everything seems to be working fine, phone started up and picked up service.
I booted into recovery, enabled lagfix, turned on all of the recommended tweaks and then ran the Quadrant Standard. Things seem a bit faster, so I guess it's all good.
Next step, Darky's 10.1.
Thanks for your help, everyone.
One more question:
I did a Nandroid backup of everything (so data, dbdata, cache AND system). The restore option says "Be careful!". What's up with that? I mean, what's the caveat?
Thanks.
I've already made some NANDROID-backups, but never seen 'Be careful!'.
If the backup was succesful I wouldn't care about that.
*sigh*, I hate to keep adding questions on to this thread, but I must.
After installing the hardcore kernel and enabling tweaks and lagfix, I'm running into exactly this problem: http://forum.xda-developers.com/showthread.php?t=851970
My phone was extremely hot for a while, then I got a warning indicating that my internal phone storage was running low, etc.
Eventually, I found this file (/data/local/tsprsp) to be the culprit. I deleted it and rebooted and now my phone is fine. However, vibration just doesn't work at all!
Any ideas? Has anyone else run into this problem?
I was told that if you do a 'full' backup, in some cases restoration will fail with some error. But it depends on the version of the ROM you are using.
That is the reason why it is recommended to backup only data and if you want to restore, then first reflash your rom, then restore the data.
Thanks, zsori. That explains the "Be careful!".
Sent from my GT-I9000M using XDA App
After trying MIUI, a stock ROM will never touch my SGS again.
meresis said:
After trying MIUI, a stock ROM will never touch my SGS again.
Click to expand...
Click to collapse
you will have to flash back a stock rom via odin if anything wrong happen during the flashing of custom roms, although chances are low if you follow the instructions carefully.
good luck and have fun flashing custom roms!
Which Gingerbread?
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
site1ca said:
So I'm continuing my quest to learn more about all of this custom ROM flashing stuff. And I wanted to get gingerbread on my phone... So I figured I'd just get an image from samfirmware.com and flash it. But then, I went here (because I was also interested in Darky's 10.1 so I was reading their guide): http://www.darkyrom.com/community/i...-darkyrom-gingerbread-jvh-noob-friendly.3080/
It says that flashing "Ficeto_JVH_I9000_Odin" will get me a stock Gingerbread. My question: what's the difference between flashing an image from samfirmware.com or flashing "Ficeto_JVH_I9000_Odin"? How do I know which to pick?
In all my browsing/reading, I realize that there are 3 "separate" parts: kernel, modem and then the "ROM". Ideally, I want to keep my modem as is... What does that correspond to in Odin? I've tried to find what "PIT", "PDA", "PHONE" and "CSC" represent in Odin, but I'm not sure I got it right. PIT = Kernel? PHONE = modem?
And finally, how do I know if a particular kernel is compatible with a particular ROM?
Sorry, I know there are lots of questions there. But please help clearing up a n00b's confusion. Thanks.
Click to expand...
Click to collapse
you got it wrong.
PIT is for mapping the partitioning of the phone. In most cases you should only use 512 pit file. and only use it when you want to wipe the phone.
the three parts is "pda" (which is the rom), "phone" (which is the modem), and "csc" (which is the carrier customization and apns)
the kernel is in the part of pda (the rom)
check the thread in xda of the kernel to see if its a gingerbread kernel or froyo kernel.
hope this clear things up
Yes, that helps. That's really good to know. So now, in Darky's guide to flashing Flash Ficeto_JVH_Odin, I see that only PIT and PDA are specified. This is reassuring, knowing that the modem and carrier stuff isn't touched.
Many thanks.
There are firmwares with three parts (Phone, PDA, CSC, including bootloader) and with only one part (PDA, no bootloader(?)). The one-part-FW is just an 'update', the one with three parts an 'upgrade'.

[Q] Ext4 to RFS on the Tab

Hello Everyone,
First of all, let me thank everyone on this forum, because it's an endless source of information regarding our favorite gadgets. I'm pretty new to this so please forgive me if this is too basic.
I've searched the forum but couldn't find a clear answer to this. Here's my background:
I have an Euro Tab, and had a few updates via Kies, first to JJ7/JK5/JJ5 (CPW) and then to JMI/JMA/JM2 (CPW).
I rooted with z4root and then with SuperOneClick (on JMI, as z4 wouldn't work). I was a bit afraid of trying custom roms, but finally took the plunge because I was tired of waiting for official Samsung Gingerbread.
I started by patching the bootloaders on JMI, as instructed in the forum and flashed JQ1. I had a few problems, but I was able to solve everything and get GB running and then rooted with CF-Root
Of course, this is like an addiction and less than 24 hours after that, I flashed Overcome Hermes 2.0.1 with 3.1.0 Kernel, adjusted UV settings and installed a few Mods.
This is like having a new tab. it's responsive, battery is better and apart from a few minor bugs, it's really the greatest experience. Congrats to all the devs. This is what it should have been out of the box.
As I understand, OC Hermes 2.0.1 converted the file system to EXT4 while partitioning (please call me wrong if this is not true). On a friend's Galaxy S, he has the option to convert to EXT4 and revert to RFS on the CWM app which doesn't exist on OC Hermes (again, please correct me if I'm wrong).
Now the question(s). (finally) If I ever want to go back to stock (Froyo) either to try the official Samsung GB for my region when it comes out or if I have to send it to Samsung for some reason (knock on wood), can I just use Odin and flash a stock ROM (say JMI) with repartitioning with no problems or do I have to revert to RFS and then flash Froyo?
If so, how should I proceed to go back to RFS?
How can I confirm which file system it's using?
I've seen threads talking about going from Froyo to GB and back, but never with overcome, always with stock ROMs so, to avoid problems, I decided to ask this for a straight yes or no.
Thanks in advance for any help or comment. If this has been answered before, please link me to it. As I said, I couldn't find it through search.
Best, a.
I use chainfire's ext4conversion tool. It has the ability to switch to rfs. I am not on overcome rom so not sure it will work but its an apk available on xda forums, could give it a whirl.
As for the tool it works good.
Reverting to stock will get u back to rfs as well. (from memory stock gb files from overcome 2.0 rc1 were ok / going back to froyo had to use one of roto rom froyo versions ).
ezynow said:
I use chainfire's ext4conversion tool. It has the ability to switch to rfs. I am not on overcome rom so not sure it will work but its an apk available on xda forums, could give it a whirl.
As for the tool it works good.
Reverting to stock will get u back to rfs as well. (from memory stock gb files from overcome 2.0 rc1 were ok / going back to froyo had to use one of roto rom froyo versions ).
Click to expand...
Click to collapse
Thank you. It's amazing that just by searching what you referred in your post, I was able to find a lot more info on this.
For what I understand, Overcome is based on JPZ and there's no CF-Root for that. I think the tools apk can be used with CF-Root only, right?
Maybe I can flash JQ1 (or other ROM supported by CF-Root) and then convert to RFS if needed.
Now I need to know if I have to go back to RFS to flash a stock Froyo ROM.
Again, thanks ;-)
If you use odin + re-partition with the pit file then essesntially you are formating back to rfs. So any stock froyo rom will be ok. Cwm flash / update wont work. I suppose you have already have your original firmware or just download one.
ezynow said:
If you use odin + re-partition with the pit file then essesntially you are formating back to rfs. So any stock froyo rom will be ok. Cwm flash / update wont work. I suppose you have already have your original firmware or just download one.
Click to expand...
Click to collapse
That's what I thought, but wasn't sure. Being a noob has it's quircks
Thank you so much.
BTW, CF-Root is basically superuser+CWM+busybox. If I have these on Overcome, is it safe to assume the EXT4 tool extension for CF-Root will work on Overcome or should I expect other dependencies? I think CWM versions are different in OC and CF-Root.
You can basicly back to froyo rom
As about the ext4 to rfs , you can do that for overcome hermes , just go through cwm and then vodo and then disable it from there (lagfix) after you reboot your system will start convert from ext4 back to rfs and also u can do the same if u wanna back to ext4
Sent from hell to take your soul
k0sh said:
You can basicly back to froyo rom
As about the ext4 to rfs , you can do that for overcome hermes , just go through cwm and then vodo and then disable it from there (lagfix) after you reboot your system will start convert from ext4 back to rfs and also u can do the same if u wanna back to ext4
Sent from hell to take your soul
Click to expand...
Click to collapse
Thank you, k0sh.
It sure is simple when you know what to look for.
Cheers
k0sh said:
You can basicly back to froyo rom
As about the ext4 to rfs , you can do that for overcome hermes , just go through cwm and then vodo and then disable it from there (lagfix) after you reboot your system will start convert from ext4 back to rfs and also u can do the same if u wanna back to ext4
Sent from hell to take your soul
Click to expand...
Click to collapse
How much time that conversion usually takes? 5min., 10min?
Depending on how much data you have on your tab. If your internal memory is studded with apps it will take quite a long time (45 minutes was reported) as the system backs up your data then restores it after conversion. If the system has fewer data it will take less (5-10 minutes).
jykke78 said:
How much time that conversion usually takes? 5min., 10min?
Click to expand...
Click to collapse
for me last time , around 1hour and my tab didn't boot , so i just force reboot it during the convert and i was know that i have to reflash back , but i take the risk and boot it again and its start over the conversion and it takes 5 to 10 mins

[Q] DarkyRom 10.2 RE Issues/Question

Hey Guys,
I have a couple of questions in regards to going back to stock from DarkyROM 10.2.
After using 10.2 for about a month now, I have noticed that while the rom is fast, There are quite alot of glitches in my day to day operations. My 3D HD games no longer work smoothly (as they did in 2.3.3 with CWM), the phone will randomly freeze up when using the browser/gallery/calender etc. After multiple re-flashes I am coming to the conclusion that to get back to my original performance I may need to flash a stock JVQ and then mayby just us CF ROOT or something of the like to get CWM access.
My question is, what preparations need to be done before preforming this flash. Also, can the stock files be flashed with ODIN? Also, if anyone has any input on why DARKYROM 10.2 seems to have these issues, please feel free to let me know. Any help will be greatly appreciated, thanks in advance!!
Phone Specs:
Samsung Galaxy Vibrant (i9000m)
DarkyRom 10.2 RE -w- KC1 Modem
Only Mod preformed after flashing RE was updating the SMS application to the SGS2 App to restore the chat bubble colors. The issues were present before this update. Did the update through DarkyRom Tool.
If you guys need any more information, just let me know..
Anyone??????
Alright, I'll take this one if no one else will. I too have the i9000m, and have learned all I can about keeping it alive and well. Going back to stock is easy. Go to general and look for the stock firmware thread. You will get instructions there on how to flash with odin. I've never used darky before but I did use CM7 and flashed back no problem. You could also look for Ramad's prerooted roms. I'm running one right now, UGKG3. Works great as I couldn't root it myself.
Sent from my GT-I9000M using XDA App
Getinaf said:
Alright, I'll take this one if no one else will. I too have the i9000m, and have learned all I can about keeping it alive and well. Going back to stock is easy. Go to general and look for the stock firmware thread. You will get instructions there on how to flash with odin. I've never used darky before but I did use CM7 and flashed back no problem. You could also look for Ramad's prerooted roms. I'm running one right now, UGKG3. Works great as I couldn't root it myself.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Hey Dude, Thanks alot for your response! One more question before making the switch....Should the voodoo lag fix that comes with Darky 10.2 be disabled before flashing with Odin back to stock?
If you want to go back to stock ROM. Before flashing disable the lagfix (for safe). You can download the firmware from www.samfirmware.com. and its an odin base installation.
Post your problem in www.darkyrom.com some expert will help you...
Hey guys.
I have flashed stock ROM (2.3.4) via Odin and worked absolutely fine. Didn't need to fiddle with the lagfix or anything. Simply popped phone into DOWNLOAD mode and flashed (with re-partition/wipe and backing up "stuff" beforehand).
The lagfix menu I think, is in the RECOVERY mode in the extended power options menu. I think thats the CWM with the DarkyROM maybe? Either way, you can enable/disable the lagfix in that menu.
Hope this helps!
Akhtar

[Q] Roms with GKG3 based firmware

Hey everybody,
Im kinda new to droid development, and have played around with it a little (flashing roms, kernels, rooting etc) however, im curious why there are roms based on pretty much every other firmware other than GKG3. I might sound like a n00b for asking about this but its mainly for my knowledge. I figured KG3 would be fairly common as it is one of the North American firmwares, but I must be incorrect? Anyways any insight on this would be great. Also a quick question, seeing as I am a Bell I9000m SGS owner does it matter if I put firmware from say Europe on my phone? I have noticed that my signal decreases when I put a rom on that is JVR based? Curious if this causes my phone, seeing as the modem is being changed to JVR, to think that I am out of country and will inflict long distance charges. This probably sounds like a dumb question, and I dont really believe LD charges will apply, but some confirmation would be nice as google didnt really help me out on this one.
Thanks!
KG3 is 2.3.3 and although it was just issued to Bell and other N.American customers, the rest of the Anfroid world has been using 2.3.4 for 6 months and some have moved to 2.3.5. The roms you see here are cutting edge and most use the latest firmware. The last official and stable release was JVR a 2.3.4 firmware and there are many good roms for JVR. It is easy to keep your KG3 modem in place and the KG3 CSC file and just upgrade your system to a custom JVR kernel and JVR rom.
I tried flashing galaxian's jvr kernel and it just bootlooped so maybe I'm doing this wrong? I kept my stock modem and CSC, flashed kernel using oden, factory reset was done as well as a cache clear prior to the flash and all I'm getting is a bootloop so I'm not entirely sure what I'm doing wrong any advice would be appreciated! And again thanx for the info in the previous post!
Sent from my GT-I9000M using XDA App
yes you flashed just the kernel, you must first flash the stock rom and then any custom kernel for the same firmware -- you need the stock rom to install the correct bootloaders prior to flashing the custom kernel
so in odin, flash JVR stock in pda, KG3 in phone and CSC
tick auto re-boot
then flash the custom kernel of choice in odin under pda
Awesome thanks for the tips! Will give this a try
Hi guys - you guys might be able to help with a wee problem.
upgraded FW today via kies to 2.3.3 KG3 from froyo 2.2 with speedmod kernel.
in the process though i lost root but worse is i now don't have 3BR, when i used to. I still have 3 button download mode though.
I want to root again and flash a different kernel (for root but also for performance/tweaks) but worried to without 3BR ie. how will I access tweaks/enable root etc without it!?
Any ideas/advice please? Thanks
first flash a complete 2.3. firmware, either 2.3.4 JVR or 2.3.5 JVT. This should re-install basic 3BR functionality. I think you have not got the necessary bootloaders in the jump from froyo to GB and a complete stock install should correct this. Do tick re-partition and use 512 pit, do check auto-boot: let the phone boot and right itself. Check for 3BR and do a system reset.
Then flash KG3 modem and CSC. Your phone should then be functional.
Then flash a kernel with root inbuilt to it.
If you use the GTO Tornado kernel you can also clean your system completely as this stage instread. If you use another kernel, do the factory reset, davlik cache clean etc. prior to flashing the kernel as suggested above.
Do the clean prior to re-installing your apps.
lgsshedden said:
first flash a complete 2.3. firmware, either 2.3.4 JVR or 2.3.5 JVT.
Click to expand...
Click to collapse
Thanks! will give this a go but have only ever really flashed a kernel before with odin so want to be doubly sure about these steps if that's ok? apologies for my noobish ignorance
- only found a 2.3.4 JVR at samfirmware - getting this and the 512pit file. This should be fine?
- then flash a KG3 modem and CSC - any idea where I get those files from? - the ones i've got now i only got through kies (and when i do get em, when i do this in odin do i only use the phone/csc boxes and leave pit empty/uncheck re-partition?
thanks again mate.
Edit: forgot to say my reason for questioning the JVR is because the one i have is listed as European...where as I have a bell mobility but in australia - does this matter? latest FW for aus/america is JVN 2.3.3
no problem: always better to ask for help first then assitance fixing a problem when it all goes pear shaped.
There is a thread on the KG3 firmware with lots of these questions answered: http://forum.xda-developers.com/showthread.php?t=1211939 and also the basic resource for firmware posted by Ramad here: http://forum.xda-developers.com/showthread.php?t=1102881 -- scroll down and you will find KG3 under N.American, he also has a nice set of illustrations for using odin.
You can also source a cwm zip for the KG3 modem from perka's stash here and on the market (free app) -- useful to havce the modem in cwm zip form as then you can just install a new stock firmawre such as JVR or JVT and add the modem in recovery.
lgsshedden said:
no problem: always better to ask for help first then assitance fixing a problem when it all goes pear shaped.
Click to expand...
Click to collapse
Thanks so much again - that looks like a hefty bit of reading to be done there via your links so before I do that, just one more Q please - and apologies if the answer for this is somewhere in the links you've provided.
i was just trying to read up about why the samfirm file extracts only to a single .tar file called JVR_JVR_JVR and how to use that in Odin and came across this thread:http://forum.xda-developers.com/showthread.php?t=1075278
my Q is - in this thread he makes a strong point of stating not to tick repartition and not to put the .pit file...but you say to do so.
am i missing something obvious?
well different people different perspectives on re-partition and pit.
Tick re-partition and flash the pit file. Leave it un-ticked and do not flash pit file. That's the only key: do one or the other.
As I understand it, the reason to re-partition is that it re-sets the base file system upon which you are now flashing the stock firmware -- seems a basic step whenever you move firmware versions e.g. 2.2 to 2.3, 2.3.3 to 2.3.4 to 2.3.5 -- not so much if you are installing a rom or kernel within that family of firmware.
Since I always then convert the file system to ext2 to speed up the system and I use damain's kernel to clean the system, I do use the pit file whenever I flash a new stock firmware to clear the basic file system and further aid removal of legacy files that could complicate the install.
---------- Post added at 09:28 PM ---------- Previous post was at 09:24 PM ----------
BTW the samfirmware files do extract using 7zip into the component parts for use in odin: pda (rom) phone (modem) and CSC. You then flash a custom kernel in the pda section if you use one for performance and root.
thanks lgssheddon, for the info here and in the PM.
Will crack on now with reading all the links you provided.
I just have to say a big fat D'oh! - why oh why could I not find the answer to what was bothering me most ie. apparent loss of recovery mode. The very first post in the first thread you linked gave me the answer - that it is now a 2BR (and tried it on my phone et voila, by magic I can get into recovery again!). Don't know how I could not find this thread even when I searched "KG3"!!
Thanks again for your help. i'l llet you know how i get on once i digest all this info
doktorV said:
Hi guys - you guys might be able to help with a wee problem.
upgraded FW today via kies to 2.3.3 KG3 from froyo 2.2 with speedmod kernel.
in the process though i lost root but worse is i now don't have 3BR, when i used to. I still have 3 button download mode though.
I want to root again and flash a different kernel (for root but also for performance/tweaks) but worried to without 3BR ie. how will I access tweaks/enable root etc without it!?
Any ideas/advice please? Thanks
Click to expand...
Click to collapse
The 3 button recovery has changed for KG3. I believe it used to be upvol home and power. I do believe now it is volup, voldown, and power. This should work for you to get you into recovery to flash whatever you like. Also the samfirmware for JVR is branded with Swisscom and doesnt work very well for using it with a KG3 modem and CSC, with my experience anyway. I would recommend to go to a JVQ PDA and use KG3 for your Phone and CSC. Also after you have installed this make sure to check what your country code is and install it. Hope this helped
lgsshedden said:
[/COLOR]BTW the samfirmware files do extract using 7zip into the component parts for use in odin: pda (rom) phone (modem) and CSC. You then flash a custom kernel in the pda section if you use one for performance and root.
Click to expand...
Click to collapse
The firmware that he is referring to doesn't. It is only one file meant for the PDA section of ODIN. Not entirely sure why they did this but i was running into problems with it as well. If you know how to play around with the core files you could in theory extract it to its root and put multiple files into .tar files (ex. select factoryfs.rfs, param.lfs etc. and place it under one .tar) but thats a lot of playing around and potentially dangerous if not done correctly.
not sure which download you are referring to but there was a branded version of JVR and a generic one on samfirmware: I have the one that does not have the swisscom logo and it certainly was extracted by 7zip into its component files (pda/phone/CSC) as they are still on my pc in that format.
You can also source stock firmware from Ramad's thread.
And I stand by my comment that for anyone using KG3 as a modem, JVR is the most stable official release available, much better than JVQ. JVT has a lot of promise and will be a better firmware than JVR but it is not yet had all the bugs sorted and while there are Gold Rom version for JVR any JVT rom is still at a beta stage and should not be used yet by someone just starting to flash custom firmware (IMO).
Hi again,
Q for lgssshedden really but if anyone can help i'd appreciate it!
have had 2 crashes now with Tornado Aureus RC1 - few little bugs/glitches eg with ringtone changing etc then on a reboot it won't go past the Tornado start screen with the big flame.
First time I just reflashed stock KG3 then reflashed the Tornado kernel, no problem. This time when I try to flash the Tornado kernel (either Aureus RC1 or Gold) it just bootloops at startup even though the flashing seems to go ok.
So now i'm back to (yawn) stock KG3 2.3.3. Really just want to root it again but with Tornado not seeming an option i'm finding it hard where to turn to root.
Thanks in advance!

Categories

Resources