Related
I am new to flashing and so far with this forums help have made it to the point where I can get into the Clockwork recovery. I can select the downloaded ROM, flash it, and re-boot. When the phone reboots the original Froyo 2.2 is still there. However it's still there but missing a bunch of stuff. No martket app, etc.
Am I missing a step here?
TIA, Jeff
We don't know the steps your taking to know if you've missed one...
I suggest you download a different ROM and test it.
Good point sorry about that.
Download ROM (Firefly in this case)
Reboot into CWR
Select ROM file on the filesytem of the phone
Flashing goes thru its thing with no errors
When I reboot the system the result is as stated above
Jeff
[email protected] said:
Good point sorry about that.
Download ROM (Firefly in this case)
Reboot into CWR
Select ROM file on the filesytem of the phone
Flashing goes thru its thing with no errors
When I reboot the system the result is as stated above
Jeff
Click to expand...
Click to collapse
Did you download a full flash file? (1xx mb)
Also, you can rename the file to update.zip, place it in the root of your sd card (not in any file) and through cwm, reinstall package.
Thanks everyone for all the help. I FINALLY got a new ROM on this thing. I followed all the same steps as before but took the suggestion to try a new ROM. Since BWolf56 has a pretty prominent plug for Firefly 3.0 I installed that and it worked fine.
Thanks again.
[email protected] said:
Thanks everyone for all the help. I FINALLY got a new ROM on this thing. I followed all the same steps as before but took the suggestion to try a new ROM. Since BWolf56 has a pretty prominent plug for Firefly 3.0 I installed that and it worked fine.
Thanks again.
Click to expand...
Click to collapse
haha! What can I say, I love this ROM
Glad we could help!
FF desktop
Deleted dumb question..............
[email protected] said:
Directly to the left of the digital clock are two numbers. Where can I go to find out what this icon is?
Jeff
Click to expand...
Click to collapse
Could you be more specefic? lol
To the left of the digital clock in the notification bar would be your battery then signal and left to it would be your data (3G / H).
Doh
The main reason that I went thru all this (and I am glad I did this is 100 times better than the stock ATT 2.2) was to get bluetooth voice dial..... And guess what? I get 'this feature is disabled on the connected phone' message. Should I have bluetooth voice dial with FF3 ?
I just noticed that the tethering option is disabled as well.......................
Jeff
I picked up a Streak 7 Wi-Fi Only yesterday. I was playing around with it and tried out the honeycomb ROm posted here. Decided I wanted to go back to stock but my Nandroid backup is gone (I think it was on sdcard1 and not sdcard2). I managed to restore a stock image I found here someplace but it is the t-mo image and wifi does not seem to work. Anyone know where I can get the wifi-only stock image?
Wrong section
Sent from my LG-P999 using XDA Premium App
ledname said:
I picked up a Streak 7 Wi-Fi Only yesterday. I was playing around with it and tried out the honeycomb ROm posted here. Decided I wanted to go back to stock but my Nandroid backup is gone (I think it was on sdcard1 and not sdcard2). I managed to restore a stock image I found here someplace but it is the t-mo image and wifi does not seem to work. Anyone know where I can get the wifi-only stock image?
Click to expand...
Click to collapse
I have the nvflash files, and if necessary the images, you need. I'll get them up somewhere and post a link for you in a bit later today.
Edit:
Here are the files you need:
http://www.multiupload.com/OM0VO9HBO9
Just download these and use the same instructions here:
http://forum.xda-developers.com/showthread.php?t=1018809
Can the original poster please confirm if this worked? I bought a Dell Streak 7 Wifi yesterday and would like to know.
andyo70 said:
Can the original poster please confirm if this worked? I bought a Dell Streak 7 Wifi yesterday and would like to know.
Click to expand...
Click to collapse
I can confirm this works!! Thanks so much op. I used this to get back from dj_steves honeycomb b3, and i did have to take a couple of extra steps. Once everything completed I was stuck at the dell logo. So I booted into recovery, to see what i could do, which was almost nothing other than clear cache etc. The internal sdcard would not mount so I couldn't put steves streakdroid 1.3 on it to try and see if it would flash. At a brick wall, I decided what the heck and I flashed the original recovery through fastboot. I rebooted into recovery and preformed a factory reset and and to my amazement was greeted with the lock screen a short while later. However, I had a notification stating that my sdcard was unformated or not the right system type. (certain on unformated cant remember the second suggestion, but i believe thats close). I went to settings>sdcard & tablet storage and pressed "format internal tablet storage", then mounted the internal tablet storage. And thats it. Back on stock 2.2.2 (wifi-only). Mega thanks op.
Thank you for confirming. Now I can try out the Honeystreak!
worked
this worked perfect for me.
i might add
i might add, that i had flashed the honeystreak in the dev section and my 7 would lock up, go to sleep (or in my case, lapse into a coma) and boot when it wanted to. had to reset with pin in the hole all the time. did this for about 3 days and said heck with it. seems to be some power issue with that flash. thanks to solidsnake66 for uploading these files. now my 7 seems to be normal again.
ok, this will help me. When I used the t-mobile backup, the partitions were different, because of the t-mobile files...I only had (I think) 11 or so GB of free memory. If I remember right, I had 12 something before. Is the .bat in this re-written to give me the 12gb, rather than the 11gb? Even if it is the WiFi files, I would like the same amount of memory I had before.
EDIT: Nevermind, I think I'm wrong, and they both use the same partitions.
Clockwordmod
Hey guys. So I used this howto to revert my dell streak 7 running on honeystreak hd7 back to android 2.2.2. Once i rebooted into the system i noticed that although in stock android, it was still rooted. While I know how to unroot, i can't get rid of clockwordmod recovery. How do i do that? I tried to uninstall the clockwordmod, but it doesn't show up under my apps. i am at my wits end. I want to send in my dell streak 7 to dell for repair, but i want it in "fresh" condition with no root or clockwordmod recovery. Any advice will be greatly appreciated. Thanks.
Files now working for me
On my fourth attempt the files worked great.
solidsnake66 said:
I have the nvflash files, and if necessary the images, you need. I'll get them up somewhere and post a link for you in a bit later today.
Edit:
Here are the files you need:
http://www.multiupload.com/OM0VO9HBO9
Just download these and use the same instructions here:
http://forum.xda-developers.com/showthread.php?t=1018809
Click to expand...
Click to collapse
Do you have the stock "system" image for use with fastboot? for a wifi only streak? I can only find the tmobile one.
What I did was to an out of the box wifi only streak 7,
1. rooted with gingerbreak 1.2, renamed a couple .apks which were supposed to eliminate the cell standby battery drain.
2. restored the device to remove my google account (this device is for a friend and owned by her!!) It was stupid and I should have used her google creds first but she was not around. I didnt think it would hurt. The device was stuck at the android click to start screen and nothing I did could get it any further.
3. used fastboot to restore the system_orig.img posted by someone else, this fixed my issues, but it was a tmobile image so I am looking for the same thing system.img but in a wifi only flavor. THought you may have it.
Thanks much.
The links he gave are for Wifi version only. First download the first link then you have to get nvflash, unzip it onto your computer then unzip the files from the first link into the folder. He is advising you that you need to follow the directions on the 2nd link.
Berryblue said:
The links he gave are for Wifi version only. First download the first link then you have to get nvflash, unzip it onto your computer then unzip the files from the first link into the folder. He is advising you that you need to follow the directions on the 2nd link.
Click to expand...
Click to collapse
Actually, postb8822 is saying that the files in those downloads are ClockWorkMod Recovery and Rooted, not stock. The Root can be removed via Gingerbreak (I've done it, once...) but the CWR recovery images are all that I find in the files provided.
Berryblue, you said that you have a backup on an SD, right? Would you please place the recovery.img and boot.img (and system.img separate from those two perhaps) at some dropbox somewhere?
Thanks.
solidsnake66 said:
I have the nvflash files, and if necessary the images, you need. I'll get them up somewhere and post a link for you in a bit later today.
Click to expand...
Click to collapse
Downloaded all these files and then followed the directions in the other thread. Ended up stuck on dell logo. Then found this posting:
metal1f3 said:
I can confirm this works!! Thanks so much op. I used this to get back from dj_steves honeycomb b3, and i did have to take a couple of extra steps. Once everything completed I was stuck at the dell logo. So I booted into recovery, to see what i could do, which was almost nothing other than clear cache etc. The internal sdcard would not mount so I couldn't put steves streakdroid 1.3 on it to try and see if it would flash. At a brick wall, I decided what the heck and I flashed the original recovery through fastboot. I rebooted into recovery and preformed a factory reset and and to my amazement was greeted with the lock screen a short while later. However, I had a notification stating that my sdcard was unformated or not the right system type. (certain on unformated cant remember the second suggestion, but i believe thats close). I went to settings>sdcard & tablet storage and pressed "format internal tablet storage", then mounted the internal tablet storage. And thats it. Back on stock 2.2.2 (wifi-only). Mega thanks op.
Click to expand...
Click to collapse
This person's problem and fix seem to be exactly what I need to do. But what I don't understand is the "flashed to original recovery through fastboot" part. I can run fastboot and it sees my Streak but I don't know where I would find the recovery mentioned in the quote. Right now when I try to go to the recovery menu I see what seems to be the normal streak recovery menu but when I choose either factory reset I get to some other dialog I never saw before. I take it that this is some new recovery thing which is why I should be restoring the "original recovery" as mentioned in the quote.
To follow-up on my own posting: After staring at my bricked streak awhile, I decided that the poster must have meant the restore_orig file from the other thread. So I went back and reran the sequence. First the restore of all those img files then the fast boot recovery of the original restore img file. Boot with volume + to get to restore screen. Reset and reboot. Exactly what I'd done before but this time it worked. Perhaps the fact that the drivers were already installed helped since the sequence of operations wasn't interrupted by those driver installs. Perhaps I was more careful the second time. Regardless, it worked. I'm back and running. Even have root now; saving me from downloading gingerbreak. I'd assume if someone was doing this to return their Streak that they'd want to run gingerbreak to remove root. One additional caveat here: Once booted to the main Dell window (can't remember name of the Dell launcher) I had to reformat the internal disc. Not a big deal for me since I didn't expect any of my user data to survive. But just a warning for others.
solidsnake66 said:
I have the nvflash files, and if necessary the images, you need. I'll get them up somewhere and post a link for you in a bit later today.
Edit:
Here are the files you need:
http://www.multiupload.com/OM0VO9HBO9
Just download these and use the same instructions here:
http://forum.xda-developers.com/showthread.php?t=1018809
Click to expand...
Click to collapse
I(we) can really use the stock img files needed to flash to stock. I hope someone posts it.
ClockworkMod Recovery loop and error:-1 during solution
Sorry, I posted on the wrong section, Thanks Chemus!
The img files that mssahota1986 referenced are the t-mobile (3g/4g) images rather than the Wifi images.
However following the reposted instructions in your post shows that the t-mobile boot and recovery images can remove the CWM, which I thought was incorrect. Combined with the altered and rooted system images previously provided, I might be able to get close to stock on my wifi, since GingerBreak 1.2 was previously able to remove root from the Wifi.
If Dell ever actually upgrades to HC, I'll try the OTA updates...maybe I'll get lucky.
Still hoping for a drop of the actual WiFi stock images (apparently the System.img is necessary)
Update: No luck on combining different file versions for me. It seemed to work, but the WiFi would not turn on.
Chemus said:
Still hoping for a drop of the actual WiFi stock images (apparently the System.img is necessary)
Click to expand...
Click to collapse
My buddy just ordered a dell streak 7 off ebay. As soon as he gets it if it's all stock I'll create images from the device without the clockwork mod and root files. I don't know when he'll be getting it but I'll post the files ASAP
anyone else getting a white screen during the restore process near p11?
third time trying and i am stuck on dell logo. cant get into recovery at all.
any ideas.
Mods if we can get this stickied it would be a big help!
Ok so here are some fixes to the problems a lot of people are having right now.
So you are on gingervolt/revolt rom and you were having problems so you decided factory reset inside settings was the best route to go? Now you're stuck in cwm recovery! Well here is you fix for that!
Exit recovery zip.
http://dl.dropbox.com/u/51199467/exitrecovery.zip
Directions:
You need to find a way to get this on your sd card i use a sd card reader but if you have another device you can put your sd card in attach to your computer and get that zip on your phone you're good after you get this zip file on your phone flash it the same way you do anything else.
So you tried to upgrade to gingervolt but you werent on gingerbread now you're stuck in a bootloop that throws you back into recovery/or your sim isnt recognized? Well if you followed directions you should have a back up made just restore that back up and your problem is fixed! If you failed to read/follow instructions(they were there for a reason!) your fix can be found in this post but again you will need a way to get the back up on your sd card (zv4)
FIX: http://forum.xda-developers.com/showthread.php?t=1129117
Follow the directions on that page this time and your problem should be fixed!
So you tried to flash revolt rom but didnt realise you were on gingerbread?
Well if you followed directions like you should have you would have made a back up before flashing this rom. However if you failed to read/follow instructions follow the instructions on this page
FIX:http://forum.xda-developers.com/showthread.php?t=1348637
Once again you will need a way to get this onto your sd card but once you do that and flash your problem should be fixed and you need to either leave it stock or flash gingervolt.
So none of these worked? Well looks like your going to need to follow the directions in this post.
Fix:http://forum.xda-developers.com/showthread.php?t=1337386
Also if none of these solutions worked for you try and post the problem if you arent getting any responses go to google and search
Freenode irc webchat when you find that and get to a page asking you to enter username/channel/and captcha then you need to enter a username
the channel to join is #Lgrevolution and enter the captcha and see if anyone is on there to help you out there are people on there at all times of the day and even if whoever is on doesnt know how to fix your problem they can probably instruct you to who can and the sit and wait game will begin!
Hopefully this helps people out and keeps people from having to repeat themselves over and over because for some reason the search feature fails to enter the thought process of some people.
Not that I need this...but good on you for tackling this and taking the initiative to put it all in one place!
Sent from my VS910 4G using xda premium
It's been quite a learning curve getting my Sprint CDMA Galaxy Tab and attempting to load every Miui, CM7/CM9 I could find on XDA and Rootzwiki. I never fully tested my tablet before beginning the delve into the flashing world so I don't know if this is an issue with the tablet itself or caused by my endless flashing trials.
I simply am unable to save any settings or data. Everytime I boot up, no matter which ROM (Miui CM7/9), it is always factory reset. This is quite frustrating.
I'm back on stock from odining Sprint EF17 GB w/ original PIT file and this is still happening. Does anyone have any idea if this was self-incurred or if there is a partitioning bug of some sort that I have missed.
Much Thanks in advance!
So every time you turn on your Tab it loads and then reboots in a continuous loop? Do you see the Android OS unlock screen or the load process does not gets so far? Because if it does not then in my opinion the boot loader is incorrect for some reason. That is my opinion.
What you can do if you suspect that the PIT is incorrect, you read your PIT and save via Heimdall and compare it with somebody else who has the same Tab as you have.
Unable to personalize "issue"
Zero_Tab_2011 said:
So every time you turn on your Tab it loads and then reboots in a continuous loop? Do you see the Android OS unlock screen or the load process does not gets so far? Because if it does not then in my opinion the boot loader is incorrect for some reason. That is my opinion.
What you can do if you suspect that the PIT is incorrect, you read your PIT and save via Heimdall and compare it with somebody else who has the same Tab as you have.
Click to expand...
Click to collapse
Negative. This is not a continuous loop bug. It is a "unable to personalize" bug. I can install market/apps/data/contacts etc etc, but every single time I boot up. it's a Fresh Copy with no personalized settings.
sounds like permission issue? Is there a fix permission in recovery?
priyana said:
sounds like permission issue? Is there a fix permission in recovery?
Click to expand...
Click to collapse
Yes I booted into CWM,fixed permissions, rebooted, put 2-3 icons on desktop, rebooted.
Nothing, it was back to factory default settings.
A permissions issue does make sense, but it didn't work and this is just mind boggling to me.
jrhsu529 said:
Yes I booted into CWM,fixed permissions, rebooted, put 2-3 icons on desktop, rebooted.
Nothing, it was back to factory default settings.
A permissions issue does make sense, but it didn't work and this is just mind boggling to me.
Click to expand...
Click to collapse
I've got the exact same problem... after reading forums for 14hrs seems like a galaxy tab thing not common at all with no real answers
Sprint SPH-P100
I'm sorry you have the same problem.
However I'm glad to have someone to share it with. Misery loves company. I've scoured the web for 3 days and have nothing.
Please if anybody knows what's going on. From my non-developer logic I need to find a way to get the changes I make to my phone to write permanently (so to speak), everything I do is temporary until I reboot.
Hmmmm... I suppose you guy's already tried to wipe all caches and reflash the kernel (= not the ROM, just the kernel) ?
Where do I find the Kernal?
It's the zImage file right?
The ROM I'm on right now is JT's CM7 here:
I wanted to try just flashing the kernal but I am unable to locate the zImage file. What directory is it in?
Edit: I found the Kernal, it's actually in the CWM 5.0.2.7 package. I'm gonna try flashing the kernal over to see if it fixes the issue.
Edit2: No cigar, reflashing kernal does not fix this issue. On a side note, I tried to upgrade to CM9 and got "Encryption Unsuccessful". Not that I am knowledgable in this, but it seems the issue may share some commonality with that.
jrhsu529 said:
Where do I find the Kernal?
It's the zImage file right?
The ROM I'm on right now is JT's CM7 here:
I wanted to try just flashing the kernal but I am unable to locate the zImage file. What directory is it in?
Click to expand...
Click to collapse
Hi,
Yah, zImage should be the kernel.
In this thread, I found something about the issue you have. It might have something to do with NoFrillsCPU... Hope this helps
dirlan2001 said:
Hi,
Yah, zImage should be the kernel.
In this thread, I found something about the issue you have. It might have something to do with NoFrillsCPU... Hope this helps
Click to expand...
Click to collapse
Eh, I just went through all 37 pages of that thread. Couldn't find anything on NoFrillsCPU and didn't see any issues that resemble mine. Was that tthe right thread? I'll do a google for nofrillscpu and see if that brings up anything.
jrhsu529 said:
Eh, I just went through all 37 pages of that thread. Couldn't find anything on NoFrillsCPU and didn't see any issues that resemble mine. Was that tthe right thread? I'll do a google for nofrillscpu and see if that brings up anything.
Click to expand...
Click to collapse
you read very fast then LOL
Anyway, my bad, it's not NoFrillsCPU but it's SetCPU ... It's in the OP : "Please DO NOT check the "Set on Boot" button in SetCPU untill you have tested it, or you may not be able to get control back without a reflash."
EDIT : Looks like there's a misunderstanding in me confused about the CDMA versions. Sounds like this thread has all the solutions you need. I may be wrong , of course...
dirlan2001 said:
you read very fast then LOL
Anyway, my bad, it's not NoFrillsCPU but it's SetCPU ... It's in the OP : "Please DO NOT check the "Set on Boot" button in SetCPU untill you have tested it, or you may not be able to get control back without a reflash."
Click to expand...
Click to collapse
I think you have my issue confused with another . My issue is that everytime I boot it's a clean boot with google account reset/desktop reset. I can't save any settings or download any apps without it getting wiped by a boot. I don't even think my ROM is currently overclocked but I'll look to see if indeed it's hiding in here somewhere.
Let me know if you see anything else that I can try :-(
Thanks though
Edit: Just checked, my system was not overcloccked and set on boot was not checked so this is definetely not the same issue.
jrhsu529 said:
I think you have my issue confused with another . My issue is that everytime I boot it's a clean boot with google account reset/desktop reset. I can't save any settings or download any apps without it getting wiped by a boot. I don't even think my ROM is currently overclocked but I'll look to see if indeed it's hiding in here somewhere.
Let me know if you see anything else that I can try :-(
Thanks though
Edit: Just checked, my system was not overcloccked and set on boot was not checked so this is definetely not the same issue.
Click to expand...
Click to collapse
LOL this is getting even more confused... while you wrote your reply, I edited my post and added this link...
Anyhow, I'm about to surrender on this, so I'm in for wishing you good luck
Bump! Bump Bump.
Hello fellow XDA'ers,
With the release of a stable CM9 candidate for the SGH-T849, I wanted to move away from the stock firmware and use a open-source/less-bloatware/pixiedust/unicornmagic firmware. Just like the fat kid squeezing his way into a candy emporium, I ran at the chance to install CM9.
I loaded the page that I had bookmarked for this very purpose:
*I can't post URLs since I am new to XDA, but it is an internal address*
Code:
wiki[dot]cyanogenmod[dot]com/wiki/Samsung_Galaxy_Tab_(GSM):_Full_Update_Guide
I followed the guide for Windows machines. I did not perform any pre-flashing backups, as all data was already backed-up. Furthermore, I'd like to fully format the internal and external SD cards for use with the tablet.
I installed all necessary drivers, and installed Technomancer's ClockworkMod onto the tablet through Heimdall (via download mode). The flash was deemed a success in the command prompt, and the tablet was rebooted by the computer. The blue bar zipped across the tab to show transfer of zImage.
However, after reboot, the tablet is stuck at the T-Mobile loading screen. I force shut down the device by holding the power button, and after shutdown unplug it from the computer.
I turn the tablet back on, and I get the same T-Mobile loading screen. By now, the tablet is looking at me like I'm stupid, which it's fully right in doing. I turn off the tablet by holding the power button, and the tablet turns off.
I try to see the battery level when plugged in via USB-AC power, but I am greeted with a battery icon that has a loading logo.
Before starting this adventure, I made sure the tablet was fully charged.
I can still enter into download mode when connected to the computer. I have only tried Heimdall, and have yet to read up on ODIN.
Relevant device information:
The device was rooted (SuperUser/BusyBox installed)
Model Number: SGH-T849
Firmware Version: 2.2
Baseband version: T849UVJJB
Kernel Version: 2.6.32.9
[email protected] #1
Build Number: FROYO.UVJJB
This is the first time that I have ever tried to flash a firmware onto an Android device. I have successfully flashed my two Nokia N8's with firmwares and have dealt with iPod touch 2Gs jailbreaks, so I am not *completely* computer incompetent. :silly:
I have tried to find the original firmware for the SGH-T849, but all the download links that I have tried to find are either dead or removed. Since only the zImage was replaced, I was hoping to simply re-flash with the factory zImage. Since I can't find the original factory firmware, I have yet to try this option.
I'm not sure what bricked state the tab is in. I'd like to hope it's soft-bricked, but that's probably not the case.
If I need to perform diagnostics on the device (or if any extra informaiton needs to be provided), I can edit this original posting with updated information. I have easy access to a Windows machine, but I may be able to get access to Ubuntu via disk image on another computer.
I don't want to be the jerk who states that "I solved it!" and leaves everyone in the dust: I'll post everything and anything that happens with this problem for future reference.
Other "stuck at loading screen posts" seem very similar to this, but solutions seem to be very divergent. Therefore, I am hoping for some clarity. Considering that the wiki post was designed for the SGH-T849, I think this thread should act as an appendix to the above wiki page for flashing this device.
Thanks,
willing_to_cooperate
Use overcome method.
T849 is the same as P1000 only with different modem.
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
Sent from my GT-P1000 using xda app-developers app
dropbox *.png image link is 404'd
Hi Priyana,
The missing pictures provided through the Dropbox link at the thread provided is giving a 404 error. Knowing this, there aren't any pictures to follow.
Does anyone have a link to the pictures that *isn't* dead? Perhaps hosting on imgur or bayimg would sove this issue for future users.
I don't want to move on the Overcome method until I have the pictures.
Thanks,
willing_to_cooperate
priyana said:
Use overcome method.
T849 is the same as P1000 only with different modem.
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hmm.. others can see it, it shouldn't be a drop box.
Here I reattach
Sent from my GT-P1000 using xda app-developers app
Image too blurry
Hi priyana,
The picture looks really tiny with unreadable text. Specifically, it's only 315px wide.
Do you have a better resolution?
Thanks,
willing_to_cooperate
priyana said:
Hmm.. others can see it, it shouldn't be a drop box.
Here I reattach
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
If you search overcome thread you should be able to find.
Nevertheless
http://forum.xda-developers.com/showpost.php?p=25971078&postcount=1316
Sent from my GT-P1000 using xda app-developers app
Hi priyana,
I followed the guide posted, and downloaded all the necessary files (some of the links in the original thread were missing).
Regardless, I downloaded similar files, and cross-checked the SHA-1 hash against what was listed on the Overcome website.
Flashed once (to Samsung factory reset), followed with a second flash to Overcome. Yahoo! :victory:
Thanks again for your guidance, even when I seemed to be a bit of an annoyance.
Again, for those looking to flashing a similar device, I should be holding the files on my computer (just in case). Just in case I need to return the favor.
Cheers!
willing_to_cooperate
priyana said:
If you search overcome thread you should be able to find.
Nevertheless
http://forum.xda-developers.com/showpost.php?p=25971078&postcount=1316
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Update on my GT-P1000/SGH-T849: T-Mobile to Overcome to CyanogenMod9/CM9
For reference:
Some people may be confused on how to move from Overcome to CyanogenMod.
The Overcome guide gives directions for wiping caches before installing the Overcome ROM. However, in the PDF guide, this is crossed out, as it is handled by a script in the Overcome ROM.
CM9 for the GT-P1000 doesn't seem to have that built in, which would cause a boot loop if the cache isn't cleared before installing CM9 for the GT-P1000. Since you can't pop the battery, force-shut-down the tablet by holding the power key until the tab shuts down.
After this, follow the Overcome guide to the point where the section of clearing caches is crossed-out. At this point, it's probably best to re-stock your tab (as priyana always suggests ad nauseum). Read between the crossed-out lines to clear caches, and install CM9 for the GT-P1000. It would be a good idea to install GApps at the same time using the same install procedure.
Hope this helps someone,
willing_to_cooperate
willing_to_cooperate
I'm going to give your username willing_to_cooperate the test
Unbelievably, I have *exactly to the letter* the same problem you had a few months ago. Like you I have a SGH-T849, and like you was trying to breathe some life into it by flashing it with Cyanogenmod. And sadly, like you I "soft bricked" it, so now all I get is a stuck T-Mobile screen on boot.
I've been trying to follow your lead and use Overcome + Odin to make things boot again, but I'm unable to get most of the files necessary. Anything that links to a multiupload.com address right now are broken links. Does anyone have other ways to access the files needed for the Overcome process?
If you have any insight on the specific step of getting the Tab out of its current bricked state, I'd much appreciate it.
Also, SGH-T849 has been mentioned as needing a "different modem". What/where is the correct file to use for that step?
Thanks,
Ben
It is right there in general section.
Or follow my signature.
Sent from my GT-P1000 using xda app-developers app
Completing a request.
Hello bklass!
I will do one better. In this case, I will deliver. As I type, the RAR package is uploading.
I will PM you a link to the file when I have uploaded the necessary package. The link that I will provide to your account will be valid for no more than 72 hours from the time I send you the link to the RAR package via PM, NOT from the time of this public post.
I do not want to post a public link, as people will blindly download it, hoping something works. Better to reply to this thread to get the required package. That way, there's a sense of order for this device.
The size of the package is ~1.23GB.
There are some extra files there, as I was trying to make a full copy of all possible files (to possibly help other users). Please don't be scared with the different modems, just make sure to PICK THE RIGHT MODEM.... or you may screw up your tablet (which you want to avoid).
There is a PDF guide of the steps required for using the different files. I would print this off/have it open on another computer, and read through it SEVERAL times to understand what you are doing. I am not saying it's hard, it is just very technically detailed. Make sure to have an afternoon free for the entire procedure. There is a point in the guide which I labelled as "start here," as I took a break, and didn't want to lose my specific spot. If you want to break up the procedure over two sessions, that'd be a good place to stop.
I am 99.99% sure that all the files are present in the RAR'd directory. However, if by some clerical error I forgot to include a specific file (which may be in another directory on my laptop), please let me know of the exact filename so it can be added to an updated archive I upload and send to interested users.
Simply referring to a post (that may be outdated, littered with dead links, and people thanking in-reply instead of properly using a button) does NOT help potential users/customers entering the Android family.
All I ask is that you publicly reply to this message (when you get the file and go through the steps) if: (1) the package sent to you is complete, and; (2) the package provided actually works.
If you leave this thread empty with no reply, you're not cooperating...which is against my spirit of "willing to cooperate".
If you would like to install CyanogenMod, there is a highlighted step with a red note, and a red box pointing to the red note. I did that, as it is a VERY important step (specifically, making sure you delete the cache to install CyanogenMod properly, as CM packages do not clear caches from previous installations automatically: it must be done manually by the user).
For reference, I am successful in running CyanogenMod 9.0 (stable).
Happy Flashing!
willing_to_cooperate
bklaas said:
willing_to_cooperate
I'm going to give your username willing_to_cooperate the test
Unbelievably, I have *exactly to the letter* the same problem you had a few months ago. Like you I have a SGH-T849, and like you was trying to breathe some life into it by flashing it with Cyanogenmod. And sadly, like you I "soft bricked" it, so now all I get is a stuck T-Mobile screen on boot.
I've been trying to follow your lead and use Overcome + Odin to make things boot again, but I'm unable to get most of the files necessary. Anything that links to a multiupload.com address right now are broken links. Does anyone have other ways to access the files needed for the Overcome process?
If you have any insight on the specific step of getting the Tab out of its current bricked state, I'd much appreciate it.
Also, SGH-T849 has been mentioned as needing a "different modem". What/where is the correct file to use for that step?
Thanks,
Ben
Click to expand...
Click to collapse
Thanks, got the files.
I will post back to the thread when I have gone through the overcome guide and report how it went. (next week at the earliest)
cheers
priyana said:
It is right there in general section.
Or follow my signature.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I'm pleased to say that I've successfully unbricked and flashed the Overcome kernel and 4.1 ROM.
My next step is going all the way to CM9...I'm confused on a few aspects-- First, is it correct to assume that I need to flash to a CM9 kernel before flashing the CM9 ROM?
willing_to_cooperate: if that's the case, that might be the file you forgot to include in your excellent rar archive you sent my way. You really went the extra mile on the instructions btw.
Second, there was a mention earlier in the thread it would be a good idea to go back to stock before moving to CM9. If that's the case, why did I install the Overcome ROM in the first place? Was that a wasted step, considering my end goal was CM9?
cheers,
#!/ben
bklaas said:
Thanks, got the files.
I will post back to the thread when I have gone through the overcome guide and report how it went. (next week at the earliest)
cheers
Click to expand...
Click to collapse
bklaas said:
I'm pleased to say that I've successfully unbricked and flashed the Overcome kernel and 4.1 ROM.
My next step is going all the way to CM9...I'm confused on a few aspects-- First, is it correct to assume that I need to flash to a CM9 kernel before flashing the CM9 ROM?
willing_to_cooperate: if that's the case, that might be the file you forgot to include in your excellent rar archive you sent my way. You really went the extra mile on the instructions btw.
Second, there was a mention earlier in the thread it would be a good idea to go back to stock before moving to CM9. If that's the case, why did I install the Overcome ROM in the first place? Was that a wasted step, considering my end goal was CM9?
cheers,
#!/ben
Click to expand...
Click to collapse
The guide was overcome, that is why overcome ROM was flashed using CWM.
But, actually you don't need that.
You only need to Odin flash the Overcome kernel.
That is it. You don't even need to wait for the robotic voice to complete its thing.
Just force it off.
Then boot to recovery.
use that recovery to flash CM9, twice.
You are kind of right, you need CM9 kernel, but it is done by the first flash
(spot the CWM is different from overcome one, after first flash).
Second flash will install CM9.
Then you flash gapps and reboot.
If you reboot after CM9 without gapps, you can still flash gapps later, but you won't get the setup wizard (the one that ask you to set up wifi, put gmail id, choose to use gmail to backup, bla bla)
So just remember, in the future, restock means Odin flash GB-stock-safe.
Then you will want to Odin flash the Overcome kernel because that is the easiest way to install CWM.
From there it is flashing from CWM.
Full success thanks to this thread
I am 100% up and running with CM9 on my SGH-T849 (T-Mobile branded original 7" Galaxy Tab), thanks to the excellent help from willing_to_cooperate and priyana.
FYI, 2 biggest roadblocks to getting this completed were:
1. Inability to find the necessary files because of broken links, downloads found on sites blocked as malware, etc. [SOLVED] by willing_to_cooperate and him putting together an awesome .rar archive of all necessary files, including a critical annotation in the Overcome guide PDF that told me about the necessary step of wiping cache when flashing CM9
2. Inability to find well-written or even correct information about what to do. As a gadget hobbyist, I have been doing Linux stuff for almost a decade. That community tends to be very sharp and focused to task. The android mod community is quite a bit different I'm finding out-- for every thread with good discussion points there are 25 that say "How do I tweak teh andrd better so I can show everyone how kewl I am". I will concede that this just comes with the territory. Someone tweaking their stock T-mobile phone is quite a bit different than someone installing Ubuntu on a laptop. Nevertheless, [SOLVED] again by willing_to_cooperate and priyana on this thread. Kudos to both of you.
For the record, though I jumped through a few more hoops than was required, these were the steps from getting to "soft-bricked" Galaxy Tab SGH-T849 to fully running CM9 w/gapps.
1. Follow Overcome guide documentation to restock stable Gingerbread
2. Follow Overcome guide to flash Overcome kernel 4.0.0 using Odin
3. Boot and connect Tab as USB storage device
4. Copy CM9 and gapps zip files to mounted Tab (which is the internal SD card)
5. Boot into recovery mode (clockwork mod, which was installed in step 2)
6. Wipe flash/cache through Clockwork Mod
7. Install CM9 and gapps through Clockwork Mod
8. Boot and rejoice in the CM9 awesomeness
cheers,
#!/ben
For the record (as you already have CM9 working on your tablet), I did not include CyanogenMod (CM) releases in the package that I sent to you.
The reason I didn't do that is that the CM ROMs are always updating, and it is easier for the user to find the correct and safest location to download the plain CM ROM files.
For those wondering what address I'm referring to:
http://get.cm/?device=p1 "p1" is the code name for the device.
To clarify, the package that I sent is what I used to get my tablet out of stock (T-Mobile) via Overcome, then updating to CM9.0.
You can select stable, release candidate (RC) or nightly from the menu on the left-hand side. If you are just starting, I would strongly suggest you use the most recent stable ROM for your device (that way, you minimize the risk of using a ROM that may still have bugs).
Good to hear of success relating to your device.
To other people that need the package that I sent to bklass (as you cannot find all the files required due to possible broken links that may happen now or in the future), please PM me and refer to this thread.
I will try to re-write the Overcome guide on a long-term "to-do list" that will clearly delimit what point is restocking, and what point is flashing with another ROM. That, or updating the relevant CM wiki page with proper steps. That way, there is no need to search for a PDF or picture file with relevant steps, just refer to the proper steps in the CM wiki link.
When I rewrite the guide, I'll make sure to include files that are required, with relevant MD5 hashes appended.
Regards,
willing_to_cooperate.
bklaas said:
I'm pleased to say that I've successfully unbricked and flashed the Overcome kernel and 4.1 ROM.
My next step is going all the way to CM9...I'm confused on a few aspects-- First, is it correct to assume that I need to flash to a CM9 kernel before flashing the CM9 ROM?
willing_to_cooperate: if that's the case, that might be the file you forgot to include in your excellent rar archive you sent my way. You really went the extra mile on the instructions btw.
Second, there was a mention earlier in the thread it would be a good idea to go back to stock before moving to CM9. If that's the case, why did I install the Overcome ROM in the first place? Was that a wasted step, considering my end goal was CM9?
cheers,
#!/ben
Click to expand...
Click to collapse
> I will do one better. In this case, I will deliver. As I type, the RAR package is uploading.
Hi! Do you still have that RAR file? I followed the steps at the cyanogenmod site and ended up with the same t-mobile image.
I can still connect to my phone typing "adb shell" on the terminal, and execute commands there, but I do not know how to bring it back to life.
Thanks!
If you're using terminology like shell, I'll assume your on a *nix system.
In short, the files are Windows-based, and should have all components.
PM me and I'll send you the link, as I don't want the RAR file publicly posted (I have limited hosting space via Drop box that I don't want slammed by the XDA community).
Cheers!
willing_to_cooperate
Sent from my GT-P1000 using xda app-developers app
I'm having a difficult time getting mine off the boot screen. Odin doesn't recognize it thus the Overcome steps don't work. Any thoughts?
Thanks,
Holy
Holyloktar said:
I'm having a difficult time getting mine off the boot screen. Odin doesn't recognize it thus the Overcome steps don't work. Any thoughts?
Thanks,
Holy
Click to expand...
Click to collapse
Hi Holykotar,
Hmm... Let me troubleshoot. I'll be approaching your problem from a "cross-examination/troubleshooting" perspective. Please answer all the questions below:
1) Are you having a bootloop? That is, tablet boots up, goes to a logo, then repeats until you get bored?
If you can, it may be wise to enter recovery, delete all caches, and re-start the tablet.
The first time I tried going through the steps, I had a bootloop as the caches were incompatible with the ROM. This may be your case, but it is difficult to determine with the limited information that you have provided me.
Therefore, as stated, I would start off by going into recovery, and deleting all caches. If that works, let me know.
2) What version of ODIN are you using?
Later versions may be incompatible. I used Odin3 v1.7 with success on Windows 7 Ultimate. Also, it could be an issue of not starting ODIN with administrative privileges.
3) What OS are you using?
This may seem silly, but good information for people reading this thread. As stated, I used Windows 7 Ultimate.
4) Have you installed the required computer drivers so the tablet is successfully recognized by the computer?
This would fix some interface issues. If the software (ODIN) can't communicate with the tablet (GT-P1000), then it may be a driver issue.
5) What guide are you using? Better yet, do you have all the required files?
If you are using the guide entitled: "The Overcome Experience" (I have it as a PDF), then there shouldn't be any problems. However, if you are having issues with a proper guide, PM me and I will send you a link to download all necessary files to flash the GT-P1000 (T-Mobile version) without any problems. I request that you PM me for the files, as I don't want the download link distributed (as my bandwidth is fast but limited).
Happy Flashing :laugh:
willing_to_cooperate