[Q] Build 1009? Trouble with download and recovery mode? - Captivate Q&A, Help & Troubleshooting

My wife's captivate is build 1009. I can't seem to find any info on it. It was on stock froyo but rooted with non-market apps enabled. I odin back to eclair and was trying to install CWM. I put the update.zip on the SD but when I try to boot into recovery (Volume up + Down and pwr) it just boots up normal. I had to use a jig to get it into download mode originally.
Any Ideas?

brandon_L said:
My wife's captivate is build 1009. I can't seem to find any info on it. It was on stock froyo but rooted with non-market apps enabled. I odin back to eclair and was trying to install CWM. I put the update.zip on the SD but when I try to boot into recovery (Volume up + Down and pwr) it just boots up normal. I had to use a jig to get it into download mode originally.
Any Ideas?
Click to expand...
Click to collapse
Did you release power button when at&t screen comes up?
SIGNATURE : Life is like a box of captivates, you never know if your gps will work

Hi,
My phone is 1007 and had the same problem.
Solution:
- You need to have the 3buttonfix.zip and the cwm update.zip on your SD.
- adb reboot recovery (from windows command line with enabled usb debugging on the phone)
- update to cwm then flash 3buttonfix
Warning: 3buttonfix only contains the Secondary Boot Loader so use it only if you have the stock bootloaders or your phone will get a hard brick

I recently got a 1009 build and have had zero problems. When I got it, the first thing I did was root it and fox the whole 3e recovery thing (http://forum.xda-developers.com/showthread.php?t=909213), then it was good to go.
I have found that this phone I got is the best one I have had, period.
I first had a 1007 - crappy gps but never had any loss of button combos or anything. It always was easy to flash anything.
Then I had a 1008 - awesome gps, but had problems with losing button combos when flashing different things.
Now on 1009 - best of both. awesome gps, all button combos work flawlessly.
on my 1008 I did notice that sometimes I could get to recovery holding all three buttons longer than usual - until the att screen flashed a couple of times. Maybe this would work on your 1009.
Also on the 1008 I would flash back to stock with ODIN 1 click, then I could reflash the stock 3 button fix to get them back.

When the update.zip is in SD, and then on stock recovery you have to press re-install packages twice before cwm will kick in.
sent from SGS Captivate 2.3.4 with CM7 or MIUI using Escapist or TKglitch

Thanks for all the help. It is appreciated. I tried every button combo and short and long presses and nothing works. I was able to use a jig to get into download and get back to stock 2.1 I tried to just use kies to update to the stock 2.2 but I keep getting "unregistered device" message and won't "light up" the update button.
I may try going to AT&T and seeing if they will let me exchange it or calling Samsung and seeing what they will do.
If all else fails I may try the abd thing. Once I figure that out
Thanks again for the suggestions.
I've got Serendipity 7 on my phone and loving it! Never imagined I'd have so much trouble with this one. It was only rooted.

Did you try the 3E recovery fix yet? I just got a replacement phone today and it is a 1009 build. The 3 button combo is working on my end. Sorry you are having issues.

flashman2002 said:
Did you try the 3E recovery fix yet? I just got a replacement phone today and it is a 1009 build. The 3 button combo is working on my end. Sorry you are having issues.
Click to expand...
Click to collapse
Will that allow it to go into recovery mode?

It is supposed to. I think I misspoke thought, it should be the 3 button combo fix. Not the 3e recovery.

brandon_L said:
I tried to just use kies to update to the stock 2.2 but I keep getting "unregistered device" message and won't "light up" the update button.QUOTE]
This may help solve that issue so you can get back to 2.2 if you need
http://forum.xda-developers.com/showthread.php?t=880223
Click to expand...
Click to collapse

brandon_L said:
My wife's captivate is build 1009. I can't seem to find any info on it. It was on stock froyo but rooted with non-market apps enabled. I odin back to eclair and was trying to install CWM. I put the update.zip on the SD but when I try to boot into recovery (Volume up + Down and pwr) it just boots up normal. I had to use a jig to get it into download mode originally.
Any Ideas?
Click to expand...
Click to collapse
The key combo to get into recovery for the Cappy is NOT Vol up + Vol down + Power
The key combo to get into recovery for the Cappy IS Vol up + Power until the screen comes on, then release.

Well I had to go to ATT to pick up a micro cell. They gave me a $200 credit on my bill! There is almost no reception at my house.
While I was there I talked to them about my wife's phone. We have the AT&T warranty. He gave me a number for the warranty department.
They were able to tell that the phone had been rooted. This is after odin back to 2.1. They did offer to allow me exchange it for the deductible of $125. No Thanks!
The phone still works fine. I just need to learn a little more to get it updated. The suggestions here should work.

I'm sorry but i think you all are crazy.
The 3e recovery fix will not help you get to recovery. It unlocks the 3e recovery so you can flash unsigned zips like on 2e.
The key combo for captivates in indeed Vol up + Vol down + Power (not on ginger leak), i use it 5 times a day. Hold down all three untill you see the atnt screen, keep holding and you should see it go black and come back again, then release power.
And if you odin one click back to stock and master clear atnt can NOT tell that you were ever rooted. There will be no trace of ever doing anything, just as fresh as it was out of the box. Many people have got replacements by doing this.
But if the recovery combo doesnt work then the 3 button fix and adb are your options

When I try to upgrade with kies it says unregistered device. An earlier post mentioned a fix for this but I'm not sure if I'm up to it yet.
Sent from my SGH-I897 using XDA App

Anyone who wants flash anything on an android device should install adb on their computer.
How long have you been trying to get this to work? Adb takes like 5 minutes to install (if that) and once it's there it's just 3 words to get into recovery, Seriously it's "adb reboot recovery" and bam.

What did you install? What I read has me installing many programs and plugins on the computer. Do I need all of that or is there a simpler package? What needs to be on the phone.
Sent from my SGH-I897 using XDA App

Thanks for the help
Well I finally figured out how to use adb and get the phone into recovery I would like to install CWM and Serendipity 6.4 but my wife has lost all faith in me. I'll keep working on her.

Talked her into it. Serendipity 6.4 installed and running

Related

Help 2 day old Captivate Freezing up.

I have a Samsung Captivate and was able to sim unlock nd then root everything was running great, but because i wanted to change the rom and get rid of the AT&T bloatware I decided to install SRE rom from this site but first i had to install rom manager from the market, & install Clockwork Mod which i did so far so good. I go ahead watch the video follow it step by step except i didn't wipe data then install rom. So i decided to kinda start over i booted into recovery wiped data then attempted to install SRE rom again and that's when all hell broke loose phone freezing up on the home screen, not completing its boot process, rebooting by itself, i tried removing Sim card, Microsd, but still not allowing me to reboot into recovery with the key combo or ne other way for that matter. I then tried odin one click to reinstall factory everything but no luck. Sorry for the long story just trying to put it all out there. O yeah i'm a newb incase you couldn't tell. I don't have insurance to try to return to at&t. Thank you in advance for any and all help you may provide.
one_cam_vtec said:
I have a Samsung Captivate and was able to sim unlock nd then root everything was running great, but because i wanted to change the rom and get rid of the AT&T bloatware I decided to install SRE rom from this site but first i had to install rom manager from the market, & install Clockwork Mod which i did so far so good. I go ahead watch the video follow it step by step except i didn't wipe data then install rom. So i decided to kinda start over i booted into recovery wiped data then attempted to install SRE rom again and that's when all hell broke loose phone freezing up on the home screen, not completing its boot process, rebooting by itself, i tried removing Sim card, Microsd, but still not allowing me to reboot into recovery with the key combo or ne other way for that matter. I then tried odin one click to reinstall factory everything but no luck. Sorry for the long story just trying to put it all out there. O yeah i'm a newb incase you couldn't tell. I don't have insurance to try to return to at&t. Thank you in advance for any and all help you may provide.
Click to expand...
Click to collapse
try getting your phone into download mode. If you can do that then use odin to flash everything to stock.
Are you able to get adb to access the phone? You can access recovery from there with the following command:
Code:
adb reboot recovery
Also, are you getting into download mode when trying Odin 1-click? I've found a pretty fool-proof method pull battery/SIM/SD, putting the battery in, holding down the two volume buttons and then plugging in the USB. Works every time for me, and is easier than it sounds.
I was stuck on a boot loop the other night and that process got me into download mode so I could flash with Odin and then restore my backup.
Worst comes to worst, just bring it to AT&T and say it randomly did that. If it's only two days old, and you're under contract (didn't buy it outright) you don't need insurance. I don't even think insurance is available for this phone.
take out the battery, plug in the usb, put the battery back in, hold both volume buttons down, then hold the power button down... the grey/green battery icon will flash to a black screen, as soon as it flashes to the black screen the second time, let the power button go, and download mode should be there.
@rrrrrramos i do not have a contract with them. I obtained this phone through a friend that does have insurance for the handset. Since my computer does not recognize it i am not able to adb.
@magnumrt62 & rrrrramos I have tried these button, usb combos and nothing. I appreciate all the responses i will con't to try and seek psychiatric help...lol.
How would i know i am in dl mode? All it does when i let go of the power button after the second blk screen is nothing but show green battery nd con't to charge then goes to black screen. Computer doesn't recognize it.
Are you using the SRE with voodoo in it, if so that is not playing nice with ROM Manager, it is a known issue that Clockwork Mod dosen't recognize ext4. Sounds like that may be the issue. read this thread http://forum.xda-developers.com/showthread.php?t=784170
It sound like that is the problem.
I am unable to mount/unmount the internal/external sd cards because the phone freezes and does not allow for this. The few times i was able to get odin to recognize phone com3 i hit masterclear left it alone and 6hrs later it had done nothing. I can't even get into recovery mode. I am about to see if this beautiful phone will fly then bounce... O how a grown man wants to cry over his phone... LMAO... Can ne 1 close to orlando, kissimme, poincianna help a fellow Captivate lover out i got beer money, gas money, i'll drive too you. hell i'll even cook a new york strip or two.. HELP ME PLEASE..
To do master clear your have to be in usb debug mode and at the home screen. Fire up odin then plug the phone in odin will see the phone and then hit master clear. It will then wipe the phone
Sent from my Samsung Captivate w/Voodoo using XDA App
Thats where the phone freezes up at on the home screen and just stays stuck there. The last time I was able to get into the phone i switched on usb debugging but still nothing. I just booted up the phone and heard the sweet bing sound but still doesn't show up.. I really appreciate every1 taking time out to try to help me.. Just wanted to put that out there..
So am i one of the unfortunate souls to have "BRICKED" his phone. I will not give up yet.. As long as i see the sweet "S" i will not give up..
I don't think you bricked it. Something is going on with your drivers, if the computer won't recognize it. Obviously your phone has been able to boot into recovery before if you had ClockworkMod on it. Did you get into Recovery using the key combo?
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
You need to use the odin from here: http://forum.xda-developers.com/showthread.php?t=731989 as it is made to specifically use with the captivate. It also includes the jf6 kernael which is critical. I used method 3 for the I-9000 because SRE 1.3 put that kernel on the phone and screwed it up big time, it has different hardware assignments. When you put the battery in, hold volume up and down and plug in the usb, no sim, no external sd when doing this. No other version of odin worded for me, just this one. You can't do a master clear until you are fully booted, I don't care what anyone says, it will never work, besides, you don't need to. You need to hit the "Start" button in odin when it show that you're connected. It will reflash you phone with the proper rom and kernel.
Don't download anything else from there but the odin file, you have the drivers already and don't need the other kernels (what got you here to begin with ). just that version of odin that already has what you need.
Good luck man!
one_cam_vtec said:
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
Click to expand...
Click to collapse
It's great that you can get into recovery mode through adb because that means you can get into download mode: adb reboot download. Then you can flash back to stock with odin.
Also forget about recovery. That's not going to help you right now. You need to be in download mode to use Odin
I'm going to give that a shot when i get home. Why didn't I think about adb reboot download wow guess you can tell i'm a real NEWB.. Thanks i'll let u know how it works out for me..
one_cam_vtec said:
I have not been able to get into recovery using any key combo. Right know i am actually in Android System Recovery by using adb reboot recovery and a lil luck and speed. It is recognized by odin3 0:[com3] but it will not do any thing. I clicked master clear and it states master clear started but that was 53 minutes ago.
Click to expand...
Click to collapse
What is it that you don't understand. Master clear only works when you are at the home screen. You can't evoke it from download mode or recovery. You have to have your phone recognized by odin when you are at your home screen and then you can hit master clear. That is the only way that it will work.
It sounds like adb works so when you are at the home screen and you envoke adb reboot recovery it reboots the phone into recovery correct. If that is working then there should be no reason master clear won't work then. Boot the phone up normally and then run odin 1 click then plug the phone in if odin recognizes the phone then hit master clear and see what it does. It should work.
@ Everyone who suggested things for me to try THANK YOU. I finally got it with the adb reboot download. Didn't know i could do that. @Sparker366 I would envoke adb b4 it got to the home screen as soon as odin recognized it i would envoke commands, because the phone would freeze on me on the home screen Just didn't know about the "download" command. Thanks again every1...

I know,Another Bricked Phone...sigh

I had loaded the ginger clone rom and all was well. I then however wanted to swap kernels so i loaded up seitrons cwm 1.5.6 and proceeded to flash through cwm. this has now become the worst day of my life. the phone will not boot past the galaxy s screen. i cannot not get into recovery and both computers now say usb device not recognized when in download trying to flash odin. i am worried that something is corrupted on my phone because not matter how many times i uninstall and reinstall the drivers no luck. i think it is officially bricked and im sol. maybe some great minds can figure it out here.
It's not bricked - issue is trying to get your computer to recognize your phone when in download mode so you can flash it back.
What OS are you running? Also - where did you download the drivers from? Some seem to work better than others.
If you can get to the galaxy screen you might still be able to to get into recovery. pull out the battery and use the 3 button combo. Hold down both volume button then power and let go of the power button after it turns on. then just reinstall the rom
I'm willing to bet you can also get into Download Mode either with button combos, or a JIG. Once in Download, you can use Odin to restore to JF6, and have a working phone to flash around with again.
i can get into download mode no problem. and i think it is quite possible drivers are corrupted on the phone itself. my wifes phone works on the same exact setup. no usb device not recognized error. i have tried the drivers from here and samsung directly with no luck. 3 button combo does not work. sim out sim in battery out and in. but like i said it will just not register with the comp and hers will. so im going to att and seeing about replacing it. but i will see how that goes. ive done this lots of times with no issues ever.
download works
3 button combo does not so no recovery
usb device not recognized error
thanks for the help and keep it coming i will try everything if i haven't already.
Try current usb port
Sent from my SCH-I897 using XDA App
Think I'm in worse shape. Tried flashing just the kernel to get BLN working again (last ROM I put on somehow loaded a non-compatible kernel). Now the phone boots the white ATT screen and just sits there. Can't get it into D/L mode with 3-button and doesn't respond to computer I have been using to flash ROMs for a couple weeks now...
Am I hosed? ANY help would be greatly appreciated...
You could try to use a JIG to force your phone into Download Mode
Okay...well, got into D/L mode finally. Used Odin to get it back to factory. Used the One Click rooter again, except now it boots to recovery 3e, which doesn't let my power button work as the okay button Pulling the battery to reset it, but it will no longer go into D/L mode to use Odin again. It keeps booting to the recovery Utils, which I cant get out of...*sigh*
Thoughts?
at least your able to do something i still cannot get my phone into recovery or to be recognized by the computer. it is not the drivers so i have no idea. i can only think that something got funked up with the kernel flash.
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
magnumrt562 said:
have you tried a different usb cable? I was having this problem, and the stock samsung cable was B.O. and wasnt working... i tried my blackberry one and all was good
Click to expand...
Click to collapse
i actually tried this yes. i had a blackberry cable from the storm (shivers) that was laying around. tried that but no luck with that or my wifes cable as well. but a good tip for others nonetheless
Pirateghost said:
if you are getting into 3e recovery then you are most certainly NOT using the JF6 one click stock
3e recovery comes on JI6 which is the FroYo leak....completely different builds and roms
Click to expand...
Click to collapse
I just want to quote this to stress the importance.
Thank you, didn't realize that (still sorta new to this)...
I downloaded a zip (I thought from here somewhere) that extracted into the 4 files. Anyone got a link to the JH6 set of files?
I also downloaded DG's "One Click Odin", but it doesn't seem to really do anything when I run it unless I manually load all the files. Also, I don't see a "Master Clean" like the post refer too
are you sure you downloaded the right odin? in the one click version, theres no option to load files at all. only a "start" and "master clear"
make sure the odin one click is open before you connect your phone.
http://forum.xda-developers.com/showthread.php?t=731989
You guys rock! I don't know how, cause I could have sworn I D/L'd it from that link before and I got the generic Odin, but it looks like I have the right one now! Thank you for your patience with us noobs as we start getting into this new world!
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
zippox180 said:
glad you got yours working. i have officially given up and receiving a new one on tuesday. i tried everything but somehow someway the phone is not recognized in download mode. oh well have to mess the with new one then lol
Click to expand...
Click to collapse
I was having the same problem. Have you tried powering off, start odin, hold both the volume up/down, then plug in the usb to your phone?

I broke recovery mode ?

Hi...
Ok.. I was on rogers 2.2 stock, I was trying to follow instructions to install paragon, anyway, it didnt work, my phone was still working great tho.. so i tried flashing stock jh6 with the one click from the wiki here... That worked and I now have a rogers phone with att stuff loading up. anyway, I am trying to complete the instructions for paragon but I can no longer get to recovery mode.
the att logo keeps rebooting if i keep holding down vol up and down, what do I do now ?
Edit : I cant seem to even get to download mode Recovery mode always worked before, download mode was always tricky, but it refuses now
do you have adb installed?? if so run adb reboot recovery in command prompt.
OR
Take out battery, take out sim and SD card. press and hold VOL UP/DOWN. put in battery, press power. release power upon seeing AT&T sign. pray.
Works for me about 99 times outta 100 at this point!
but i prefer adb since its much more fool proof!
distortionist said:
so i tried flashing stock jh6 with the one click from the wiki here...
Click to expand...
Click to collapse
<captainhindsight>You should not have flashed JH6.</captainhindsight>
As per the above post, boot the phone, enable debugging and use 'adb reboot recovery'. After you get that sorted, flash the 3 button fix and never flash to stock unless stock firmware is your final destination or your phone is so hosed you have to use download mode to fix it. If you do use odin in the future then use the right one for your phone build so you don't lose your button combos.
opcow said:
<captainhindsight>You should not have flashed JH6.</captainhindsight>
Click to expand...
Click to collapse
Nor should you have allowed yourself to be photographed in a compromising position wit Courtney Love...Sorry, couldn't resist.
but I only followed instructions Everyone that asks was getting told to go try and blah blah, well that was what I was doing.
You know now I am really stuck. I did use adb and restored stock and didnt want to mess with my phone anymore, but the at&t logo kept popping up, im with rogers. I found a fix and was following those instructions when odin screwed up, it started flashing then said it failed, it happened to me once before but my combo key was working then.
I dont understand why it stopped, It seemed to be intermittent, a bunch of issues, after flashing that at&t rom.
I wish I could fix it, I am stressing out over it, ill get the stuff for that jig tomorrow and hope that works. This phone is brand new! I am not a modder or hacker, I got stiffed by rogers and samsung with the voice dial over bluetooth issue, they wouldnt take the phone back.
I would love to have the att logo gone, rogers froyo 2.2, and broken bluetooth.. Its better than a paper weight. Please help me ! You know what.. I can live what that logo.. I just want to get my phone operational.
Goodnight, and thanks for your help.
i'm guessing you didn't flash the 3 button fix that opcow suggested before doing anything else?
if you can get into download mode, flash this:
http://forum.xda-developers.com/showthread.php?t=812434
No I didn't, in its forum it says if you had no problems initially with the 3 buttons, this is not for you. Thats what it said! I was told I shouldnt have done that and should have flashed the 3 button fix after the fact.
I just bought resistors, ill be home later to try and force download mode.
Thanks for your help, I am not as upset as I was yesterday, I was tired.

[Q] I'm pretty much out of options here. Please help.

I recently installed CM7, but I wanted to switch to Cognition.
First, I tried flashing it the same way I did CM7. Though for some reason my phone always reboots when I try to install the .zip.
I fixed permissions and tried again. It said the Cogniton mod .zip had been installed. But when I rebooted the phone, I was still on Cyanogen.
Then I decided to go back to stock with Odin. Though I can't seem to be able to get into download mode. I tried the volume down + power button method, but that didn't work.
Then I tried to plug it into my computer and do it form the command prompt. But for some reason my phone can't install the latest USB drivers.
I even tried making a jig out of 100k resistors and I just could not get the phone to start in download mode.
I am officially out of ideas on how to get rid of CM7. Anything else I can try would be fantastic. And if there really is no other way, someone please let me know I'm screwed.
You need the google adb drivers not the samsung drivers.
Its an aosp build nothing to so with touchwiz...
What, no GB bootloaders? Yoy might want to look into them.
Sent from my NuclearFusion powered Captivate
BigTortoise said:
I recently installed CM7, but I wanted to switch to Cognition.
First, I tried flashing it the same way I did CM7. Though for some reason my phone always reboots when I try to install the .zip.
I fixed permissions and tried again. It said the Cogniton mod .zip had been installed. But when I rebooted the phone, I was still on Cyanogen.
Then I decided to go back to stock with Odin. Though I can't seem to be able to get into download mode. I tried the volume down + power button method, but that didn't work.
Then I tried to plug it into my computer and do it form the command prompt. But for some reason my phone can't install the latest USB drivers.
I even tried making a jig out of 100k resistors and I just could not get the phone to start in download mode.
I am officially out of ideas on how to get rid of CM7. Anything else I can try would be fantastic. And if there really is no other way, someone please let me know I'm screwed.
Click to expand...
Click to collapse
Someone correct me if im wrong but isnt it hold down vol up + vol down then insert the usb computer cable for att bootloader.
BigTortoise said:
I recently installed CM7, but I wanted to switch to Cognition.
First, I tried flashing it the same way I did CM7. Though for some reason my phone always reboots when I try to install the .zip.
I fixed permissions and tried again. It said the Cogniton mod .zip had been installed. But when I rebooted the phone, I was still on Cyanogen.
Then I decided to go back to stock with Odin. Though I can't seem to be able to get into download mode. I tried the volume down + power button method, but that didn't work.
Then I tried to plug it into my computer and do it form the command prompt. But for some reason my phone can't install the latest USB drivers.
I even tried making a jig out of 100k resistors and I just could not get the phone to start in download mode.
I am officially out of ideas on how to get rid of CM7. Anything else I can try would be fantastic. And if there really is no other way, someone please let me know I'm screwed.
Click to expand...
Click to collapse
Seriously, this is why I just bought a jig. Look 'em up. PM me if you want a specific reference (not sure I can directly endorse on the forums). Back when I first started flashing ROMs, I would read these huge threads about people having trouble getting into Download mode. Sometimes it wasn't even a matter of getting the right bootloader or button combo, sometimes it was a matter of timing! So I shelled out for the jig when it became available and I'm so very, VERY glad I did. I've soft-bricked every single time I tried a new ROM for one stupid reason or another. The jig is your insurance policy. Now the only thing I worry about it bricking during a bootloader flash...and even that's no longer an issue since I'm in GB bootloaders, which work with everything, including CM7.
BigTortoise said:
I recently installed CM7, but I wanted to switch to Cognition.
First, I tried flashing it the same way I did CM7. Though for some reason my phone always reboots when I try to install the .zip.
I fixed permissions and tried again. It said the Cogniton mod .zip had been installed. But when I rebooted the phone, I was still on Cyanogen.
Then I decided to go back to stock with Odin. Though I can't seem to be able to get into download mode. I tried the volume down + power button method, but that didn't work.
Then I tried to plug it into my computer and do it form the command prompt. But for some reason my phone can't install the latest USB drivers.
I even tried making a jig out of 100k resistors and I just could not get the phone to start in download mode.
I am officially out of ideas on how to get rid of CM7. Anything else I can try would be fantastic. And if there really is no other way, someone please let me know I'm screwed.
Click to expand...
Click to collapse
i think this is what happened to me, i'm waiting for the jig, really hope it fixes this. i think it should be posted on the CM7 thread that after the flash you will lose all software methods of getting into download mode, and the high risk that after a flash to stock will lose the combo buttons as well.
AT&T GB BL= volume + and - and power is recovery, volume + and - and plug in usb is download
I9000 GB BL= volume down and power is download, volume up and power is recovery
Sent from my Stock KH3/4 2.3.4 Captivate using the XDA Premium App!

[Q] Samsung Galaxy S I9000M Boot Screen Loop

Hi there, I am new to this forum as I am trying to fix my gf's Samsung Galaxy S i9000M on Bell.
I tried to search up boot loop and have tried a few different ideas on the board but it doesn't seem to work.
Would like to know if anyone can help.
Here are the specs: Samsung Galaxy S i9000M - unrooted / stock.
Problem: The phone when turned on will only show the "Samsung Galaxy S I9000M" screen. It will turn black and then reloop itself. I have tried the 3 button boot to "download mode" and have successfully connected to ODIN.
I have tried to download PDA/Phone/CSC from one of the pages on this forum containing North American firmware files.
However, the problem still persists! I cannot check the OS version as I can't get the phone to boot into the OS. Is this a bootloader corruption problem? What should I do to try to fix this issue?
Any help would be greatly appreciated! THANK YOU in advance.
I assume you want Gingerbread?
If so, you want the UGKG3 download from Bell (it's the only GB ROM from Bell to date).
Go here and search for UGKG3.
The file is in 7Zip format. If you do not have anything to unpack it with, download IZArc.
Thanks for responding so quickly.
I did try the GB firmware - flashed it with ODIN - the software says successful.
But once the phone boots - it goes back into the loop - it does not know to unpack the OS to try to install and boot into it....
Any other ideas? Thanks again!
Did you flash it as a single file or 3 files?
You need to unpack the 7Zip file so you end up with 3 files:
Select PDA_UGKG3_Sbl.tar.md5 for PDA
Select CSC_BMCKG3.tar.md5 for CSC
Select PHONE_UGKG3.tar.md5 PHONE
Then flash with Odin. That should get the phone up and running again.
---------- Post added at 11:20 PM ---------- Previous post was at 11:17 PM ----------
How long has she had the phone? I wonder if she was on Froyo or GB.
Can you get into the recovery menu?
Thanks for your response.
I have unpacked all three files and loaded it into ODIN as per the firmware upgrade instructions on the thread you provided me.
I have also tried loading in both both the GB and the Froyo versions (UGKG3, UGJK3). After the "successful" message on ODIN, the phone boots up - shows the Samsung Galaxy GT I9000M screen and then goes black and keeps looping again.
I have a feeling this made me a problem with the bootloader. If the phone is completely stock, which one should i try flashing?
As the phone is stock there isn't a recovery (CWM) that i know of.... Or am I incorrect?
thanks again for your help!
OK, thanks for the clarification.
There should be the stock recovery from Samsung (2e or 3e).
Yes, it does sound like a bootloader problem.
Is it still under warranty?
EDIT: What is the build date for the phone? There will be a number in YY.MM format under the battery.
See if you can get into the recovery and try to clear the cache. That may give an indication as to what is going on.
We've had the phone for a year and a few months, so no more warranty.
In fact, we brought it back to bell store and they said there is "no way" the phone can be fixed. (yea right).
So I see a bunch of bootloaders in the forum here. Are there specific ones that work for the GT i9000M on bell? Or since I've tried flashing gb on the phone, do I need to download one that is specific to the OS? sorry as I am quite a n00b at this.
thanks!
The 3 file ROMs include a boot loader.
The GB one for Bell only includes the secondary bootloader (sbl.bin).
Bell no longer sells the i9000m, so they are hoping you'll simply buy a new one.
Your GFs phone is a couple of months older than ours. I bet the phone is one of the ones that has the issue where the internal storage is known to fail (builds prior to 11.03).
If that's the case, I think Samsung may repair/replace it, since it's a known issue with the early i9000m phones.
Did the phone get updated via Kies recently?
thanks again for following up.
How do I test if the phone's internal storage failed?
No I have not tried to update the phone via KIES. How does this work and what will it do?
Thanks!
Going into recovery and clearing the cache might show it.
If you see an error message that it can't mount something, that would be an indication.
EDIT: What's the build code?
I can't get into a recovery mode because the phone doesn't have CWM nor can I get by even the Samsung screen when it first turns on.
How do you flash via KIES? All I can do is get the phone into download mode. Can't do anything more.
Thanks.
Boot loop on stock Bell GT-I9000M
I have the same issue and still trying to find a solution.
Can't get into recovery. From most of what I read it's the boot loader. But I may be wrong, I 'm very new to this. I flashed with I9000UGKG3-homebinary with no luck. I did not however try the Sbl.bin file yet. I can still get to the Download mode and don't want to loose that ability.
Any help would be greatly appreciated.
galaxy s vibrant GT-I9000M
Bell mobility
Stock unrooted
GB
although you do not have CWM you should have a stock recovery... I know you have probably already tried.. but try again.
Menu+Power+Volume up...release only the power button as soon as the initial screen disappears.
if you do get into this screen you can do full wipes...
--pm me if you live in the Toronto area
It also might be a boot loader problem depending on what version of of android you were on and what you tried to do with odin and if you had the right version with the bootloaders etc.....
viperm5 said:
I can't get into a recovery mode because the phone doesn't have CWM nor can I get by even the Samsung screen when it first turns on.
How do you flash via KIES? All I can do is get the phone into download mode. Can't do anything more.
Thanks.
Click to expand...
Click to collapse
As dlockhart said, you should have the stock recovery on the phone.
Since you can get into download mode, you should be able to get into recovery mode by pressing volume up+home+power button.
Flashing through Kies only works if your phone will actually boot.
Since the phone is constantly boot looping, i tried to go into the stock recovery mode multiple times with the volume up + menu + power combination. Tried releasing the power button when the words are on the screen, when it is blank, and other permutations - but i cannot get into the stock recovery.
Once i press the volume down button instead though, i can quickly jump into download mode.
Is this normal? or am i doing something completely wrong?
Is there another way to get into stock recovery mode?
Don't release the power button until you see the recovery screen.
maybe also try flashing another kernel?
Boot loop on stock Bell GT-I9000M
I have tried to get to the recovery screen also with varied timing on button presses and releases, but no luck. Vol down and power gets me to download screen every time though.
I would keep trying the volume up power and home and as soon as you see the black background with galaxy showing let go of all buttons but wait until you see it restart again. So you'll hold vol. up + power + home and your phone will restart and you'll see the galaxy words keep holding the buttons until it restarts again and when you see the words let go of all three buttons. Now if your willing to switch kernels I would go to www.darkyrom.com and follow the directions there for flashing darkyrom 10.4.2 its just as smooth as stock but its not stock and voids your waranty, but since you dont have a waranty go for it. Good luck if you need any extra help you can pm me as well. I have had my phone since Oct. 2010 and flashed atleast a hundred roms and thought i broke my phone a few times but these thing are damn near impossible to totally mess up.
Sent from my GT-I9000 using Tapatalk
Is there a minimum remaining battery-life requirement for the device to enter Recovery?
Does the 3-button Recovery require power cable to be attached or not?
For what its worth, my I9000m has a Build Date of 11.04 and came with Froyo 2.2, so unless he already updated he's definitely not on 2.3.3
Downloading Kies to your PC and updating to 2.3.3 that way, just might work. Thats what I did.

Categories

Resources