Database Develop

Loose 3g data when Wifi is enabled with CM6.RC1

There have been a few discussions about this, but I have yet to find a solution that works for me...
I flashed CM6 today and now I'm finding that when I enable wifi, my 3g data connection is lost. Not sure this is really a CM problem, I just want to find a fix.
My setup:
Nexus One - CM6.RC1 - FRF91

williec30 said:
There have been a few discussions about this, but I have yet to find a solution that works for me...
I flashed CM6 today and now I'm finding that when I enable wifi, my 3g data connection is lost. Not sure this is really a CM problem, I just want to find a fix.
My setup:
Nexus One - CM6.RC1 - FRF91
Click to expand...
Click to collapse
what do you mean it's lost.. when you're turning Wifi on, that's the whole point (that you want to use your Wifi connection for data, and not your mobile 3G data.) Maybe I'm not understanding you?

pakraider said:
what do you mean it's lost.. when you're turning Wifi on, that's the whole point (that you want to use your Wifi connection for data, and not your mobile 3G data.) Maybe I'm not understanding you?
Click to expand...
Click to collapse
Even with wifi on you still need 3g data to send and receive MMS. I can't replicate this problem, though, so I'm afraid I'm not much help. All I can suggest is trying a full wipe of everything but battery and rotate stats and try to flash it again. See if that helps.

It works fine for me. Are you sure you are confussing not having both icons in the notification bar with 3g being off?
I answered this question a few months ago too.

Your 3g is not lost, it just hides the icon. Go into settings and look what network you are still connected to for yourself, it will still say 3g. If you were to send or receive an mms the 3g icon would briefly pop up, send the message, then disappear. Your phone is working just fine

thanks for the help... @roger, you are correct, i didn't realize that the icon was hidden vs. actually turned off, nor did i think to go check the actual service rather than rely on the icon

Wifi problem in my x8

Hi,
Need a help,
I'm using gingerdxv9 just re flash again.
when first time i using v9 there is no problem with wifi.
then i change the rom to cruzt 7.3 i have a problem with wifi
connection.
so i change back to v9. now i have the problem with my wifi.
the wifi is always scanning but did not connect to any wifi network or show
any network that available.
pls help what should i do.
I already do the full wipe.

Did you have "Remembered" any network?
If you did, try to forget all the remembered networks and then search again.

kris010976 said:
Hi,
Need a help,
I'm using gingerdxv9 just re flash again.
when first time i using v9 there is no problem with wifi.
then i change the rom to cruzt 7.3 i have a problem with wifi
connection.
so i change back to v9. now i have the problem with my wifi.
the wifi is always scanning but did not connect to any wifi network or show
any network that available.
pls help what should i do.
I already do the full wipe.
Click to expand...
Click to collapse
try to clear cache and dalvik cache in xrecovery

Wifi dying after a period of time.
I have a similar issue with my X8.
The Wifi works fine for a while (longest so far has been about a month) and then it just stops working. It picks up no signal what so ever from anywhere (my home router, which is about a metre away, is currently "Not in Range").
I've tried multiple versions of Android 2.2 from XDA and am now running 2.3 from the following link: http://forum.xda-developers.com/showthread.php?t=1109563
The only way i've found to bring back the Wifi is to do a FULL restore (system, data, cache, everything). I've done abt 6 restores since i started using custom ROM's about 4 months back and am in the situation where i have to do another one now. This is getting EXTREMELY irritating and I would very much appreciate it if someone could give me a solution for this.
Also, I have a lot of trouble connecting to the internet at my uni. This has been an issue from the very beginning on the X8, even before using custom ROMs. It connects the first time and then refuses to connect a second time. To connect again i have to forget the connection and start again. I don't know to describe the Wifi type but the instructions for connecting to it are in the following link http://uqconnect.net/helpdesk/wireless/eduroam/android/.
Thanks in advance

have this problem too. when i was on GDXv007 was fine then when it update to v008 i cant connect to wifi anymore.just keeps saying "obtaining ip addrees" then reboots. HEEEEEEEEEEEEEEEEEEEELLLLLLLLLLLLLLLLLLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPPPP!

BITOx said:
Did you have "Remembered" any network?
If you did, try to forget all the remembered networks and then search again.
Click to expand...
Click to collapse
Yes, this was helpful... But I have to Delete the networks I remembered, always?

Data doesn't work after changing to 2g or 3g

Does anyone know a solution for this annoying problem? After switching 2G to 3G or vica versa the internet will not work, shows 2G or 3G connectivity but the upload and download arrows never come up and there's no connection.
thanks

Mungulz said:
Does anyone know a solution for this annoying problem? After switching 2G to 3G or vica versa the internet will not work, shows 2G or 3G connectivity but the upload and download arrows never come up and there's no connection.
thanks
Click to expand...
Click to collapse
restart?
maybe that's help.
also, wipe cache from recovery.

miina_tokiha said:
restart?
maybe that's help.
also, wipe cache from recovery.
Click to expand...
Click to collapse
I restart my phone 5-6 times a day, I install new kernels often so cache clearing doesn't appear to help.. im thinking its some kernel related bug but it happens on Neoblaze and Horsepower.
Sent from my LG-P990 using Tapatalk

I'm having the same problem. After flashing HP RC 4 (or so) kernel, mobile connection just doesn't work at all, either 2g or 3g. I tried flashing cm7 (from Topo) to see if the problem is with the ROM, but it still doesn't work.
Since I mostly use wifi, I didn't notice when it stopped working, plus I usually disable mobile data. Haven't tried flashing another kernel though :/

[Q] CM10 and no connection to internet

Hello all,
I flashed CM10.0 a few weeks ago and everything was working fine up until 2 days ago, now my I9000 won't connect to the internet at all. I was using Easy Battery Saver which cancels the data signal everytime the phone is idle, but this stopped turning the connection on. I uninstalled it hoping the phone would revert back to normal but can't get connected. I restored the app hoping it would pick up the settings again but still no joy.
I have wiped everything including user data and the caches, done a factory reset and reflashed the rom. The signal did return for about 30 minutes after the flash but the connection has since died again. I've tried switching on the roaming and national roaming, also no luck.
Does anyone have any idea what might be causing this or even how to fix it?
Thanks in advance

Boogaloo27 said:
Hello all,
I flashed CM10.0 a few weeks ago and everything was working fine up until 2 days ago, now my I9000 won't connect to the internet at all. I was using Easy Battery Saver which cancels the data signal everytime the phone is idle, but this stopped turning the connection on. I uninstalled it hoping the phone would revert back to normal but can't get connected. I restored the app hoping it would pick up the settings again but still no joy.
I have wiped everything including user data and the caches, done a factory reset and reflashed the rom. The signal did return for about 30 minutes after the flash but the connection has since died again. I've tried switching on the roaming and national roaming, also no luck.
Does anyone have any idea what might be causing this or even how to fix it?
Thanks in advance
Click to expand...
Click to collapse
I am just guessing, but as from what I understand you uninstalled the application when you were not having the internet connection working. Right? The correct settings have possibly remained overwritten (some applications block the outgoing data traffic by changing the connection settings). Give APNDroid a try and if unsuccessful try going to your phone operator webpages and find the correct connection settings.
I am using CM10 with APNDroid which works fine. However sometimes I cannot connect to 3G as well. Switching the APNDroid on/off couple of times or rebooting solves the issue.

nameh said:
I am just guessing, but as from what I understand you uninstalled the application when you were not having the internet connection working. Right? The correct settings have possibly remained overwritten (some applications block the outgoing data traffic by changing the connection settings). Give APNDroid a try and if unsuccessful try going to your phone operator webpages and find the correct connection settings.
I am using CM10 with APNDroid which works fine. However sometimes I cannot connect to 3G as well. Switching the APNDroid on/off couple of times or rebooting solves the issue.
Click to expand...
Click to collapse
Thanks for the response mate. You guessed right, APNDroid hasn't fixed it and I haven't been able to find APN settings other than the one that is already in my phone. Might reverting to stock solve the issue? My contract is up at the end of the month so I could handle living with GB until then .

Hi again, reverting back will definitely not solve the issue. From what you had said I understand that the internet settings are somewhat messed up.
These settings are bound to your SIM card. By up/downgrading ROM these remain.
Could you check if your APN settings are correct (I assume you need to check with your provider).
Good luck and keep us informed.
Sent from my GT-I9000 using xda app-developers app

Just found the APN settings online. Reset my APN and it looks to be working. I'll keep an eye on it just in case but I think either the ROM or the App messed up the user/password on the APN.
Hopefully it's all fixed. Thanks for all the help.

first try apn tweaker from market then if no luck what worked for me
1 flash darkyrom 10.2 re
2 alliancerom jw4
3 then jw8
working well for past week

[Q] Data not working.

Hi all, thanks a lot to read the thread and try to help.
The thing is that even I haven't install anything nor updating any room, I have a real problem lately.
If I use WiFi my HTC works fine, but when I disconnect WiFi, even a data logo appears (H or 3G) nothing that uses data works.
I cannot use Whatsapp, Facebook even open Google on a new tab.
The arrows keep moving on my status bar, but I downloaded a data monitor and says that nothing is moving in data usage.
What can I do before I lose WiFi?
I have restored the mobile phone, a complete wipe, i'll write you soon.

Call your operator because it seems to be
A: a provider sided problem
B: a signal problem
C: hardware/software problem
If c: try to get a replacement.
Sent from my HTC One using XDA Premium 4 mobile app

SergiNS said:
Hi all, thanks a lot to read the thread and try to help.
The thing is that even I haven't install anything nor updating any room, I have a real problem lately.
If I use WiFi my HTC works fine, but when I disconnect WiFi, even a data logo appears (H or 3G) nothing that uses data works.
I cannot use Whatsapp, Facebook even open Google on a new tab.
The arrows keep moving on my status bar, but I downloaded a data monitor and says that nothing is moving in data usage.
What can I do before I lose WiFi?
I have restored the mobile phone, a complete wipe, i'll write you soon.
Click to expand...
Click to collapse
Same problem, except it is intermittent. Have always had LTE service in my apartment until a couple of weeks ago. Sometimes the mobile data works, sometimes it doesn't. Full bars, shows data icon, but can NEVER download MMS, even when mobile data is working.
Any help other than call the provider?
Viper One 6.2.1
latest firmware i could find