http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP990/AITADW/V10C_00/V10C_00.kdz
203 MB
Release available for your use in SmartFlash format
http://forum.xda-developers.com/showthread.php?t=1035041
THX to nasirahmed
Yeah. And V10C (Euro Open) is now also available through LGMobile Update tool.
ULJ said:
Yeah. And V10C (Euro Open) is now also available through LGMobile Update tool.
Click to expand...
Click to collapse
this is the EURO OPEN 10C
LGMobile Update tool + OTA
Those version numbers are just getting more and more confusing.
Isn't 10c euro open version already available here: http://forum.xda-developers.com/showthread.php?t=1035041 ?
BIN_LGP990AT-00-V10c-EUR-XX-APR-16-2011+0
Dac0908 said:
Those version numbers are just getting more and more confusing.
Isn't 10c euro open version already available here: http://forum.xda-developers.com/showthread.php?t=1035041 ?
BIN_LGP990AT-00-V10c-EUR-XX-APR-16-2011+0
Click to expand...
Click to collapse
don't bother to watch the letter just the baseband date this is the newest one 22.06.2011
KDZ
And how to flash KDZ files to our phone ?
[email protected] said:
And how to flash KDZ files to our phone ?
Click to expand...
Click to collapse
i did post that more for developers
u can use the LGMobile Update Tool or OTA
But it's not available in my country...
KeePeeR26 said:
this is the EURO OPEN 10C
LGMobile Update tool + OTA
Click to expand...
Click to collapse
I know. That is why I wrote in this thread. And because V10C have NOT been available on LGMobile Update tool before now.
ohh sh**... i have flashed the 606 via smartflash, so it says for me that i have the latest :S
10 minutes after update (10c, Sweden). BSOD!!! OMG! I have been waiting for this update for a looooong time now, and this is what I get. Congrats LG, you are now officially the most useless company in the universe!
you have waited for the update that cures the thing, it didn't cure... i think it's enough reason to refund you, because you did what you could go and try
Anyone from the UK get this via the official route? Or are we stuck with 20110405 and v10d? I'm at work so can't try now...
XT69 said:
you have waited for the update that cures the thing, it didn't cure... i think it's enough reason to refund you, because you did what you could go and try
Click to expand...
Click to collapse
I will. As soon as the holidays are over.
mparack said:
Anyone from the UK get this via the official route? Or are we stuck with 20110405 and v10d? I'm at work so can't try now...
Click to expand...
Click to collapse
Checked via the LG software this morning and it says I'm up to date, so I suppose we're stuck with 10d.
that's just bo!!0%
we could do with at least the updated baseband too though I shouldn't complain too much as I don't have issues with the phone...
Ok, my phone just started crashing today. And the LG Mobile tool says I'm up to date. I'm in NLD. Maybe only Open Europe gets the update?
No update out yet for Germans.
Baseband since MAI:
1035.21_20110405
LGE-Version since MAI:
LGP990-V10c
Europe LGP990 ANEU V10C 00_4 2011-07-04
It's v10c new europe
mparack said:
Anyone from the UK get this via the official route? Or are we stuck with 20110405 and v10d? I'm at work so can't try now...
Click to expand...
Click to collapse
Both OTA and LG Updater say i'm already up to date on 0405 v10d
Had another shutdown on Saturday. Left the phone in the glovebox in my car while I went out.
Came back and phone was hot to the touch and the battery had drained completely.
plugged phone into car charger for journey home and checked phone when I arrived at home.
Hot Battery again and no power. pulled battery and tried powering phone on again.
Phone powered up with battery showing 78% but still hot to touch
Related
This morning I made an update via LG Pc Suite. The update was a large one but could not "see" what it was. My phone is rooted. After the update was finished I have lost root rights, lost the nvidia app, all pre installed games, I have rooted the phone again, tried to install rom manager and restore a back up made a week ago but also not working. The phone kept giving a failure notice when trying to run Titanium back up. I eventually did manage to manually install the last back up from recovery, but now phone is stauck on LG boot screen. Any help please. I think the only difference after the update this morning was the V10d instead of the V10c. thank you for your help.
Maliacrete said:
This morning I made an update via LG Pc Suite. The update was a large one but could not "see" what it was. My phone is rooted. After the update was finished I have lost root rights, lost the nvidia app, all pre installed games, I have rooted the phone again, tried to install rom manager and restore a back up made a week ago but also not working. The phone kept giving a failure notice when trying to run Titanium back up. I eventually did manage to manually install the last back up from recovery, but now phone is stauck on LG boot screen. Any help please. I think the only difference after the update this morning was the V10d instead of the V10c. thank you for your help.
Click to expand...
Click to collapse
Anyonw any help please??? I have tried installing a new rom but when it opens the zip file it returns BAD.. Very frustrated... dont have phone.. PLEASE.....
i have found the solution. You can close this thread.
Well, mind sharing with us?
In case someone runs into this problem as you have?
.:george:. said:
Well, mind sharing with us?
In case someone runs into this problem as you have?
Click to expand...
Click to collapse
I wouldnt have left you like that.
Well the solution was found here: http://www.usp-forum.de/lg-p990-opt...-lg-p990-optimus-speed-flashen-anleitung.html
Its in german but basically it says no more than things which are common sence to all devs but for a guy like me its like rocket sience. Its the smartflash procedure with a german rom.
The bad thing is that I have lost at least 6 hours of my life only to found this tiny little program that does wonders. Anyway I am really pissed off with LG because the rolled out an update (be careful out there with LG PC suite) which basically messed up my phone.
Cheers.
Well, 2 my experiments with official LG update ended up with "bricked" phone where only SmartFlash helped. I strongly discourage anyone from using it
This morning i tried searching for a new phone software update via LG PC suite and I got the notification that there is an update for the phone. Undortunately I cannot "see" what the hell this update is for. As I mentioned on the first post above, this is a rather large update. Does anyone know what this could be? Could it be a LGE Version (V10d)?
Maliacrete said:
This morning i tried searching for a new phone software update via LG PC suite and I got the notification that there is an update for the phone. Undortunately I cannot "see" what the hell this update is for. As I mentioned on the first post above, this is a rather large update. Does anyone know what this could be? Could it be a LGE Version (V10d)?
Click to expand...
Click to collapse
I have called LG customer service to ask them what this update is.. "If your phone is working properly you should not do the update" he said to me.... Sorry? Why do you release an update then?? "This is made automatically, the phone always finds updates"... so why didnt it find last week? "Well this may be a problem with your PC" What???? are you crazy? So you are telling me that when the 2.3 rolls out I shall not do the update becaue my phone works fine? "Yes Sir". I want to know what this update is... "This is the call centre sir, we do not know"...
Well If there is one reason to change the phone it would only be because of the customer service and their unreliability...
Customer service is everywhere the same,at least they picked up your phone
And yes, they dont have these informations usually, and getting them when responsible project does not issue any changelist is problematic. Its more like project management
issue , which should not be big suprise considering all the troubles...
Sent from my LG-P990 using Tapatalk
mikee2185 said:
Customer service is everywhere the same,at least they picked up your phone
And yes, they dont have these informations usually, and getting them when responsible project does not issue any changelist is problematic. Its more like project management
issue , which should not be big suprise considering all the troubles...
Sent from my LG-P990 using Tapatalk
Click to expand...
Click to collapse
I give up. I have called US (live chat). No help there. LG Swiss gave me their service centre office (another company).... nothing..
Well it must be a ghost update chasing me around.... hmmm root and ROM is the solution.
This morning I got an update message from the LG Updater that there is an update to download. This time it shows that the the New Version is V10D.. I am running on V10C.
Can anyone tell me please:
a) Should i update or not? The phone is rooted running stock rom
b) Does the "D" version imrpove something?
thank you
First off, thanks for the link..really appreaciate it. It work..my limping super soft brick 2x now can breathe again. Those german forum was not bad..a step by step instruction was given for newbie like me.
Owh btw, i say..no need to change to 10D as it is for german vodafone branded firmware while 10C for open firmware, that what it said in the link you gave us above.
Newbie on the block.
Hi,
I am having some troubles with the LGMobile update support tool. It reports that my phone is using V10C when the phone is actually using V10B (and 614 baseband).
Has anyone experienced the same thing?
And does anyone have solution to get LGMobile update support tool to show the correct firmware version?
try reinstall it
I've seen this reported before, pretty sure it's because you're using a newer baseband than it expects. Drop it down to the v10B baseband and it should work.
Should I try reinstalling LGMobile update support tool?
Is it just a wild guess or do you know that it is a solution to the problem?
Rusty! said:
I've seen this reported before, pretty sure it's because you're using a newer baseband than it expects. Drop it down to the v10B baseband and it should work.
Click to expand...
Click to collapse
Okay. I will try that right now. Reporting back within half an hour.
ULJ said:
Should I try reinstalling LGMobile update support tool?
Is it just a wild guess or do you know that it is a solution to the problem?
Click to expand...
Click to collapse
like said before, the problem seems your baseband...
reflashed stock (V10b) and newer baseband about three weeks ago and had the same issue, after rebooting pc and lg2x i wasn't able to connect my phone with lgmobile updater
then i downloaded latest german ROM (V10c) and reflashed with SmartFlash and it worked
I have just reverted back to baseband 315 flashing with smartflash, and now LGMobile update support tool is reporting the correct firmware version (V10B). So reverting back to old baseband solved the problem.
Thanks everyone for input
For me it says:
New mobile phone software is available
Please update your software.
If not connected, connect the device now to start update.
If the update is done later, connect the device at that time.
Before the update is starting and after i've accepted that i can't revert, it says:
Your mobile phone software is the latest version.
why is this?
I'm at
LGEP990-V10b
Baseband 1035.21_20110502
Must be baseband. 502 is not part of V10B.
ULJ said:
Must be baseband. 502 is not part of V10B.
Click to expand...
Click to collapse
Which baseband would be correct, and how do i revert?
connubialis said:
Which baseband would be correct, and how do i revert?
Click to expand...
Click to collapse
With smartflash. I'm using the 315 baseband (15 march).
http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110614/
ULJ said:
With smartflash. I'm using the 315 baseband (15 march).
http://android.modaco.com/content/l...lash-stock-baseband-release-1035-21-20110614/
Click to expand...
Click to collapse
Yeah. I tried that. I follow the exact procedure to flash the beseband, but when I press start i get asked Do you want to apply odmvalue?" if i press yes, the screen blacks out and if i press no it goes into an endless loop with S/W Upgrade. THe status in smartflash doesnt update after "Download complete"
In your case you need a new LG usb driver. That's is why smartflash is not acting correctly.
ULJ said:
In your case you need a new LG usb driver. That's is why smartflash is not acting correctly.
Click to expand...
Click to collapse
I used the exact same drivers when i flashed to the baseband I'm at now, but i tried to uninstall current drivers and download the correct ones and reinstalled. Still same problem.
By the way. I get this error when i try to run OneClick Recovery
Code:
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: fastboot.bin
/ 1024992/1024992 bytes sent
fastboot.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
failed executing command 14 NvError 0x120000
command failure: partition download failed
I actually tried this on 2 different computers. Same error on both.
Then you should try another USB port on your computer.
I'm really stumped on this one so I hope someone can help.
It started when the v10d update was pushed via PC Suite last night. So I went ahead and happily updated it. Rooting it immediately and removing certain LG apps that I've always removed (including LGHome, LG IME, etc.)
1st major problem happened when I tried to go into recovery (vol down + power), only to remember that I haven't reinstall CWM yet. An LG progress bar appeared, and a full wipe commenced.
That issue was fixed with a Smartflash to an open Euro v10c ROM.
I have now restored to my stock v10b ROM, but when I connect to PC suite, it's telling me that I'm on v10d and there are not updates available! I've tried uninstall/reinstalling PC suite. Even restarting the phone. But I am still stuck with the same message.
I'd like to go through the OTA update again since it saved all my apps and it was (well kinda) hassle-free.
Help?
Delete the drivers & pc suite from the pc, then reinstall and reconnect, it did the job for me
It is important to remove all the lg stuff from your computer...
Sent from my LG-P990 using XDA App
XT69 said:
Delete the drivers & pc suite from the pc, then reinstall and reconnect, it did the job for me
It is important to remove all the lg stuff from your computer...
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
A.... now drivers I didnt remove. Will try it now. Thanks for the reply mate.
I removed both PC Suite and LG United Drivers, same thing though, it's telling me that my current v10b is up to date. When I just received a v10d update yesterday.
TrymHansen helped me get a solution.
Just flash an older BB! As we know, nandroids don't touch the BB partition, and apparently, that is where LG PC Suite is looking at. I downgraded my BB to 0405, and LG is now telling me to update again.
My BB is 0405, but still it wont tell me that ugrade is avaible :S
Please help me
my bb also 0405 and its telling me its up to date
solution, anyone???
I've flashed new BB manually
No other way found.
strange issue here as well,
in the tool i am getting v10c but my phone has v10b the drivers are o.k but still i get this strange issue. i have flashed the BB manually to june but i cannot get the official stock update, also when i check ota it says its the last. should i jsut flash manually?
i dont want to loose all the stuff in the phone.
DeMar27 said:
I've flashed new BB manually
No other way found.
Click to expand...
Click to collapse
do i need to root the phone if i want to flash BB only, and does new BB makes call quallity better...thanks...
nencak said:
do i need to root the phone if i want to flash BB only, and does new BB makes call quallity better...thanks...
Click to expand...
Click to collapse
You don't need root to flash bb use smartflash for this. According to my tests with bb it sometimes fixes the quality of the call nd reduces battery usage but some don't I got new bb + new til this morning form the forums and now its works really great
Give it a go
Sent from my LG-P990 using XDA App
shpapy said:
You don't need root to flash bb use smartflash for this. According to my tests with bb it sometimes fixes the quality of the call nd reduces battery usage but some don't I got new bb + new til this morning form the forums and now its works really great
Give it a go
Sent from my LG-P990 using XDA App
Click to expand...
Click to collapse
thanks a lot, i think i saw some post with instruction and software needed to do the job...
Here. It is http://forum.xda-developers.com/showthread.php?t=1008070
Enjoy
Sent from my LG-P990 using XDA App
Here.......All d firmwares..download the one you need n use smartflash to flash it..
http://forum.xda-developers.com/showthread.php?t=1035041
Hey thanks but this is euro open c
But I was explained that c is the last for euro open I also flashed new bb & ril
Sent from my LG-P990 using XDA App
Hiya all new to this so please be nice!
I'm in the uk and attempted to update my LG black to the 2.3.4 gingerbread using flash - however afterwards it wouldn't connect to wifi, plus some of it was in chinese!! i connected it to my pc and LG did a software update, now the phone will only show LG symbol and the four menu buttons keep flashing.
when i connect the phone using usb the s/w update still comes up so i would like advice on how i can install firmware so that the phone works again
I've browsing your threads and i've seen one for the unbricking so i was going to attempt this tonight - but will that work? also do i pick the V10A, V10B or V10D??
help please!?
Jamesm478 said:
Hiya all new to this so please be nice!
I'm in the uk and attempted to update my LG black to the 2.3.4 gingerbread using flash - however afterwards it wouldn't connect to wifi, plus some of it was in chinese!! i connected it to my pc and LG did a software update, now the phone will only show LG symbol and the four menu buttons keep flashing.
when i connect the phone using usb the s/w update still comes up so i would like advice on how i can install firmware so that the phone works again
I've browsing your threads and i've seen one for the unbricking so i was going to attempt this tonight - but will that work? also do i pick the V10A, V10B or V10D??
help please!?
Click to expand...
Click to collapse
thats called bootloop, got this bro.. you can use v20 too..
Your device is bricked.
Flash using V10H (recommended for UK)
http://www.freeflashing.net/index.php?topic=218.0
Cheers omr911 - but on the link i couldn't see the v10h zip?
also phone isn't unlocked so i'm on orange will that matter?
Jamesm478 said:
Cheers omr911 - but on the link i couldn't see the v10h zip?
also phone isn't unlocked so i'm on orange will that matter?
Click to expand...
Click to collapse
You didn't look closely there are 4 V10H links on that page.
But anyways try this
Download this for orange :
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP970/AORUTL/v10d_00/V10D_00.kdz
Then extract the cab from kdz.
After that your gonna have to extract .wdb and .dll
Then extract bin/fls files and flash using SFT.
Extract .kdz :
http://forum.xda-developers.com/showthread.php?t=1566532
Download SFT :
http://forum.xda-developers.com/showthread.php?t=1448803
Actually V20 is not released in UK yet so V10D is latest.
Anyone know about the Firmware download links of LG Optimus 4X HD ( P880G )???? it is a Canadian Version.
vishav420 said:
Anyone know about the Firmware download links of LG Optimus 4X HD ( P880G )???? it is a Canadian Version.
Click to expand...
Click to collapse
Latest to Canada is V10C:
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP880G/AAWCBK/V10C_00/V10C_00.kdz
Thanks... How to update this firmware manually ?
can you tell me how can i update this firmware manually on my phone through Pc ?
vishav420 said:
can you tell me how can i update this firmware manually on my phone through Pc ?
Click to expand...
Click to collapse
Yes how?
I need to do the same thing
rts91 said:
Yes how?
I need to do the same thing
Click to expand...
Click to collapse
vishav420 said:
can you tell me how can i update this firmware manually on my phone through Pc ?
Click to expand...
Click to collapse
You guys can do so by READING and learning at the same time.
Here's the link: http://forum.xda-developers.com/showthread.php?t=1861854
Learn to use the search button in the forums.
babymatteo said:
You guys can do so by READING and learning at the same time.
Here's the link: http://forum.xda-developers.com/showthread.php?t=1861854
Learn to use the search button in the forums.
Click to expand...
Click to collapse
im stuck at the upgrade screen.
I have the p880g wind version
I got the phone brand new. after rooting it i tried to flash TWRP . it made my phone boot to the WIND logo and freeze.
I Then tried to use kdz to bring my phone back to stock. v10c
which screwed me up even more because now no matter what I do I get stuck on the upgrade screen
lg update tool recognizes my phone for a bit but then tells me theres a connection problem between phone and PC.
i even tried to flash another country firmware kdz file.
are there any specifics i should know about with the kdz?
how can i get lg update tool to update my device?
whats the best way to get back to STOCK?
rts91 said:
im stuck at the upgrade screen.
I have the p880g wind version
I got the phone brand new. after rooting it i tried to flash TWRP . it made my phone boot to the WIND logo and freeze.
I Then tried to use kdz to bring my phone back to stock. v10c
which screwed me up even more because now no matter what I do I get stuck on the upgrade screen
lg update tool recognizes my phone for a bit but then tells me theres a connection problem between phone and PC.
i even tried to flash another country firmware kdz file.
are there any specifics i should know about with the kdz?
how can i get lg update tool to update my device?
whats the best way to get back to STOCK?
Click to expand...
Click to collapse
I'm sorry to blunt - but are you really stupid, or do you just like wasting money? Did you not bother to read any of the countless threads in which software upgrades for the P880G are discussed and it is said that it is different hardware to the standard (International) P880? Did you think that you might just get lucky and be able to flash our software on your phone?
I'm sorry mate, but unless you can source the .kdz firmware for your model of phone you are probably going to be left with a very pretty, expensive paper-weight on your hands.
SimonTS said:
I'm sorry to blunt - but are you really stupid, or do you just like wasting money? Did you not bother to read any of the countless threads in which software upgrades for the P880G are discussed and it is said that it is different hardware to the standard (International) P880? Did you think that you might just get lucky and be able to flash our software on your phone?
I'm sorry mate, but unless you can source the .kdz firmware for your model of phone you are probably going to be left with a very pretty, expensive paper-weight on your hands.
Click to expand...
Click to collapse
What do u mean source the kdz firmware.?
rts91 said:
im stuck at the upgrade screen.
I have the p880g wind version
................
how can i get lg update tool to update my device?
whats the best way to get back to STOCK?
Click to expand...
Click to collapse
Just install PC SUITE and recover from the options. Right now I'm not near the computer soo, can't give you the "step by step". LG TOOL will be installed.
Sent from my LG-P880 using xda app-developers app
RuedasLocas said:
Just install PC SUITE and recover from the options. Right now I'm not near the computer soo, can't give you the "step by step". LG TOOL will be installed.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
After I put in my imei nothing happens
EDIT:
sorry i mean that the phone is not syncing properly with LG PC Suite , just like it didn't with the update Tool.