Database Develop

Wildfire Overclock

Hi all
I 've wildfire with root access .I tried to flash it with all custom ROMS's, only CyanogenMod run after reststart but wasn't stable, others couldn' t even start after reboot. Loaded kernels ,without OC dosn't help. I only need try OC .Can it be done without reflashing whole ROM ??

Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps

I use the stock HTC Wildfire ROM overclocked @768Mhz and sometimes it just get fkd up when i write messages ... Im gonna change phone asap
Sent from my HTC Wildfire using XDA App

MySelf_v1 said:
I use the stock HTC Wildfire ROM overclocked @768Mhz
Click to expand...
Click to collapse
My HTC switches off casualy on 768Mhz i think this is too high for any Wildfire

Mine seems stable now at max 652mhz and min 245mhz ... i get like 3.8 mflops and I think thats nice?

Mine works fine on cyanogenmod with oc 768 mhz

i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?

dakhr said:
Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps
Click to expand...
Click to collapse
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.

relesman said:
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.
Click to expand...
Click to collapse
Kernel from this topic:
forum.xda-developers.com/showthread.php?t=798471
Stock ROM-my Wildfire is completly "resistant" to any custom ROM(do not boot ,crash, screen freezes etc)

™¤»Aamir«¤™ said:
i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?
Click to expand...
Click to collapse
Yes i've orginal ROM only OC kernel flashed
Kernel here :
forum.xda-developers.com/showthread.php?t=798471

How to..
Hi, how do I overclock? I mean, what app do I have to use? I also find a picture showing the temperature in the status bar - maybe it is also possible to show the speed as well.
M.

buy SetCpu from android market

Mines can do 748mhz ,but if i set 768mhz,it can't boot and become a "soft brick"(use clockwork mod recovery to recover it)
I use cyanogen mod 7 #17

I found 691 to be most stable for every ROM i tried so far. SetCpu can be found free somewhere in the XDA forum.

SetCPU on o2x, MIUI

Greetings Forum
I read that I could underclock my CPU for longer battery times with setCPU, however it asks me for what device and gives me a list of.. Stuff.
Which one do I choose?
I'm on MIUI, does the kernel allow over/underclocking?
Kind Regards
~Neefy

Neefy said:
Greetings Forum
I read that I could underclock my CPU for longer battery times with setCPU, however it asks me for what device and gives me a list of.. Stuff.
Which one do I choose?
I'm on MIUI, does the kernel allow over/underclocking?
Kind Regards
~Neefy
Click to expand...
Click to collapse
stock kernel can do underclocking i think.
you can choose the option Tegra, i did this with setCPU aswell

Thank you will try this
I've got it set to 600 max 200 min, is this ok? I'm not quite sure how all of this works, pretty sure this is underclocking (y/n?)
However, will this give me more batterylife?

Bump
Sent from my Optimus 2X using XDA App

Why my phone can't overclock?It's version of lge v10d.
-------------------------------------
Sent from my LG-P990

stock kernel not support to OC, try vorkkernel .

okries said:
stock kernel not support to OC, try vorkkernel .
Click to expand...
Click to collapse
on v10d you can't use vorkkernel, try neoblaze kernel

Cino86 said:
on v10d you can't use vorkkernel, try neoblaze kernel
Click to expand...
Click to collapse
no no no...
neoblaze not support miui..
look he is on miui right now..
if u apply neoblaze on miui and u will get bootloop..
im on miui and i use vorkkernel..

Sorry, wrong quote.. It was a reply to -Lovin'you!- post.
On miui or cyanogen vorkkernel is the best, for stock rom you had to use neoblaze or swiftextreme

On MIUI (which is based on Cyanogen Mod) use VorkKernel
On Stock and and Modaco Custom Roms (and other roms based in stock) use Neoblaze or Swiftextreme.
These allow overclocking. And I suggest you trying to use Pimp My CPU.

Overclock

Hi ,
I have a few begineers questions , I have a galaxy s that is running gingerbread 2.3.6 , is rooted and had a voodoo kernel (with recovery option) . I was thinking of possibilities of overclocking , can that be done with the setup I have ?
thanks in advance

You can easily overclock your phone with a root access with an application like this :
bit.ly/fnUFCD
There are lots of applications existing.
You can see on your kernel thread on this board what frequency is supported.

try Tegrak overclock or NSTools. Find other apps on Market.
Sent from my GT-I9000 using XDA App

thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers

saintetienne said:
thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers
Click to expand...
Click to collapse
Semaphore is the best http://forum.xda-developers.com/showthread.php?t=1112908

thanks again , my phone is showing jvz suffix at end of kernel - show the semaphore jvz is the way to go ?
I am trying to avoid an expensive paperwight

Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App

sefira said:
Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App
Click to expand...
Click to collapse
Absolutely right

thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers

saintetienne said:
thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers
Click to expand...
Click to collapse
You can use CWM

install zip from sd ?
cheers

Plumped for odin in the end - all done , thanks to everyone for your help

Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?

Kops said:
Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?
Click to expand...
Click to collapse
Battery use will obviously be higher with the processor on more clock speed but there's no problem with the temperature. Remember, always overclock in minor steps,check stability and in this way you would get a stable phone

[Q] Droid a855 overclock in 2013

first off let me say i am not new to rooting or overclocking. i have a original droid a855 and i have rooted it and want to over clock it, but the problem is that all the downloads i could find were megaupload links and we all know about what happend to that. so i was wondering if anybody knows where to get the evilboot kernals or is there and other over clockiing methods that will allow over 800mhz, Please help!!!! Thank You

Give this a try: https://play.google.com/store/apps/details?id=pt.com.darksun.milestoneoverclock

tried that
i already tried that and it only lets me get to 800mhz which is still better than 550mhz, but i want 1ghz. i started with this guide, it wont let me post a the link but if you google droid a85 overclock scroll down and click on the one that starts with *release* that is the guide that im trying to use
but all the links are megaupload i got the evilboot1ghz but i cant find the flash image indicated in the guide. and i flashed sp recovery and then it would not recognize the battery so i then i flashed FRG89G and that fixed the problem. but the cause of the problem was that i used a 2.1 sp recovery on a 2.2.3 install. So what i need is the 1ghz flash image that is in the guide and a sp recovery that will work on 2.2.3 please help. Thanks

Have you checked the custom roms for the droid? I'm not really aware of them as I own a Milestone, but in the Milestone CM roms, there is an option to set the min/max cpu values. It's easier and more safe than flashing all kind of hacks.

ya............
Erovia said:
Have you checked the custom roms for the droid? I'm not really aware of them as I own a Milestone, but in the Milestone CM roms, there is an option to set the min/max cpu values. It's easier and more safe than flashing all kind of hacks.
Click to expand...
Click to collapse
it probly is and by the way i was able to milestone over clock to go to 1.2ghz but its not a very good over clock and i realy wanna just do the evilboot over clock

droid31 said:
it probly is and by the way i was able to milestone over clock to go to 1.2ghz but its not a very good over clock and i realy wanna just do the evilboot over clock
Click to expand...
Click to collapse
I would recommend taking a look at Prime's deprimed kernel which can be downloaded from here, it allows you to customize the overclocking, voltage, etc. When my Droid 1 was my daily driver phone I used Prime's De-primed kernel and it offered excellent performance running at 1.0 GHz, other people have been able to stably set it to 1.25 GHz as well. For more information on Prime's De-primed kernel and how to use it's features I would recommend checking out this thread.

Sorry it took me so long to get back, That looks very promising and i guess ill try it out

ok so im running cm7 and i flashed the prime kernal and went to the terminal and typed "su" enter that works then "overclock" enter, says command not found. i tried reflashing the kernal, does the same thing. please help!!!

droid31 said:
ok so im running cm7 and i flashed the prime kernal and went to the terminal and typed "su" enter that works then "overclock" enter, says command not found. i tried reflashing the kernal, does the same thing. please help!!!
Click to expand...
Click to collapse
Your sure you flashed the kernel zip in recovery correctly right? I would also take a look at this post here from Prime that tells you how to use his kernel it's possible that the other features and scripts of his kernel will work for you.

i have clock work mod recovery and i install the zip from there and the i tried the comands but it didnt work, but in setcpu or the cm7 performance settings it will allow 1ghz and the bumblebee governer. So i dont know if i should just use that or what???????

droid31 said:
i have clock work mod recovery and i install the zip from there and the i tried the comands but it didnt work, but in setcpu or the cm7 performance settings it will allow 1ghz and the bumblebee governer. So i dont know if i should just use that or what???????
Click to expand...
Click to collapse
If you see that options to use the 1 GHz clock speed and bumblebee governor are available in SetCPU then you can use SetCPU and that should work fine. SetCPU is what I always used to use to tweak Prime's de-primed kernel after flashing the kernel.

Thank You for the help , ive been running it at 1ghz and bumblebee for a while now and it is sooooooooooooooo much better than stock

Stock ROM OverClock How to?

Hi guys!
Stock ROM OverClock How to?

If you want to stay on stock rom you can install CroPol Kernel to OC CPU up to 1.2 GHz and the GPU up to 729MHz (stock is 400). But keep in mind that your WiFi won't work on Stock.

OC is only possible if the kernel supports it - and stock kernel doesn´t.

CyanogenMod charge eats too much. So I had to use the Stock ROM. Rootl already. I picked up the absurd application of the Samsung phone but still does not work fast. OC Kernel does not work on stock ROM kernel. OC kernel have installed the WiFi does not work. What can I do to speed up the phone?
I'm using Google translation. I hope you understand what I said.

Berkant Ayhan Karabudak said:
CyanogenMod charge eats too much. So I had to use the Stock ROM. Rootl already. I picked up the absurd application of the Samsung phone but still does not work fast. OC Kernel does not work on stock ROM kernel. OC kernel have installed the WiFi does not work. What can I do to speed up the phone?
I'm using Google translation. I hope you understand what I said.
Click to expand...
Click to collapse
install this amazing rooted stock ROM, after that
a) flash CrossBreeder 7.2.13 and
b) install Performance Control
This 3 things will make your device fly ...

moonryder said:
install this amazing rooted stock ROM, after that
a) flash CrossBreeder 7.2.13 and
b) install Performance Control
This 3 things will make your device fly ...
Click to expand...
Click to collapse
Thank you. Phone officially took flight. :good: