Greetings Forum
I read that I could underclock my CPU for longer battery times with setCPU, however it asks me for what device and gives me a list of.. Stuff.
Which one do I choose?
I'm on MIUI, does the kernel allow over/underclocking?
Kind Regards
~Neefy
Neefy said:
Greetings Forum
I read that I could underclock my CPU for longer battery times with setCPU, however it asks me for what device and gives me a list of.. Stuff.
Which one do I choose?
I'm on MIUI, does the kernel allow over/underclocking?
Kind Regards
~Neefy
Click to expand...
Click to collapse
stock kernel can do underclocking i think.
you can choose the option Tegra, i did this with setCPU aswell
Thank you will try this
I've got it set to 600 max 200 min, is this ok? I'm not quite sure how all of this works, pretty sure this is underclocking (y/n?)
However, will this give me more batterylife?
Bump
Sent from my Optimus 2X using XDA App
Why my phone can't overclock?It's version of lge v10d.
-------------------------------------
Sent from my LG-P990
stock kernel not support to OC, try vorkkernel .
okries said:
stock kernel not support to OC, try vorkkernel .
Click to expand...
Click to collapse
on v10d you can't use vorkkernel, try neoblaze kernel
Cino86 said:
on v10d you can't use vorkkernel, try neoblaze kernel
Click to expand...
Click to collapse
no no no...
neoblaze not support miui..
look he is on miui right now..
if u apply neoblaze on miui and u will get bootloop..
im on miui and i use vorkkernel..
Sorry, wrong quote.. It was a reply to -Lovin'you!- post.
On miui or cyanogen vorkkernel is the best, for stock rom you had to use neoblaze or swiftextreme
On MIUI (which is based on Cyanogen Mod) use VorkKernel
On Stock and and Modaco Custom Roms (and other roms based in stock) use Neoblaze or Swiftextreme.
These allow overclocking. And I suggest you trying to use Pimp My CPU.
Related
Hi all
I 've wildfire with root access .I tried to flash it with all custom ROMS's, only CyanogenMod run after reststart but wasn't stable, others couldn' t even start after reboot. Loaded kernels ,without OC dosn't help. I only need try OC .Can it be done without reflashing whole ROM ??
Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps
I use the stock HTC Wildfire ROM overclocked @768Mhz and sometimes it just get fkd up when i write messages ... Im gonna change phone asap
Sent from my HTC Wildfire using XDA App
MySelf_v1 said:
I use the stock HTC Wildfire ROM overclocked @768Mhz
Click to expand...
Click to collapse
My HTC switches off casualy on 768Mhz i think this is too high for any Wildfire
Mine seems stable now at max 652mhz and min 245mhz ... i get like 3.8 mflops and I think thats nice?
Mine works fine on cyanogenmod with oc 768 mhz
i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?
dakhr said:
Ok done with Jacob Kernel
So far stable on 652MHz .Visible speed difference in google maps
Click to expand...
Click to collapse
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.
relesman said:
Could you please tell wich kernel? I have a WILDFIRE with Android 2.1 with root acess. With another rom i already used 691MHZ very stable.
Click to expand...
Click to collapse
Kernel from this topic:
forum.xda-developers.com/showthread.php?t=798471
Stock ROM-my Wildfire is completly "resistant" to any custom ROM(do not boot ,crash, screen freezes etc)
™¤»Aamir«¤™ said:
i have a question do you have to flash a custom ROM to OC your wildfire?
or can you just have the ROM you got when you bought your phone root the phone and then flash OC kernel?
Click to expand...
Click to collapse
Yes i've orginal ROM only OC kernel flashed
Kernel here :
forum.xda-developers.com/showthread.php?t=798471
How to..
Hi, how do I overclock? I mean, what app do I have to use? I also find a picture showing the temperature in the status bar - maybe it is also possible to show the speed as well.
M.
buy SetCpu from android market
Mines can do 748mhz ,but if i set 768mhz,it can't boot and become a "soft brick"(use clockwork mod recovery to recover it)
I use cyanogen mod 7 #17
I found 691 to be most stable for every ROM i tried so far. SetCpu can be found free somewhere in the XDA forum.
This is my kernel based on 2.2.2 kernel released by LG! This kernel has LG touchscreen fix and I've added OC from HERE, ext4 and btrfs support (btrfs is experimental) and VPN support (tun.ko module).
If you would like to use this kernel: http://www.multiupload.com/H3HQT7WMSY
Do not forget to make nandroid backup first.
Packaged in koush's anykernel for compatibility with any rom.
PS: Thanks to Mik_os for his patience
PPS: With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
socialdistortion said:
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I used a new patch and this one, modify only 2 kernel files!
I can go up to 806MHz, which is really the top frequency my phone can handle. And amazingly enough, the cpu spike isn't there What changes did you make?
Work like a charm, but lack insteractive mode in setcpu and when you put it in power mode it stay at max freq. Thanks for your work buddy.
hope you include this on your next ROM release.... more power to you sir!
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
bluviper said:
hope you include this on your next ROM release.... more power to you sir!
Click to expand...
Click to collapse
#fenice mount this kernel!
Zerobarat1 said:
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
Click to expand...
Click to collapse
Oh yes!
Can not be used in the ROM 2.3.3 Mik_os?
segyto said:
Can not be used in the ROM 2.3.3 Mik_os?
Click to expand...
Click to collapse
Arrrrgh this does not contain any of the patches needed by Gingerbread to function at least remotely fine .
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
peacekeeper05 said:
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
Click to expand...
Click to collapse
Anyway, i prefer use my phone at 729MHz or 768MHz!
yep.
confirmed, cpu spike is not there.
thanks!
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
yelo3 said:
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
Click to expand...
Click to collapse
in 2.2.2 v10R kernel LG released a fix for the touch bug!
sarfaraz1989 said:
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
Click to expand...
Click to collapse
can anyone confirm this?
is it just for 2.2 or is 2.2.2 affected?
Can I flash this kernel into my AmberHome ROM (2.2)?
it has so small transitions in speed like from 600Mhz u cud scale upto 645Mhz..I like this
EDIT: yes u can check it out on any rom..It will work on any rom as it is packages like koush's style
This topic is for my MoDaCo Custom Kernel for the LG Optimus 2x - Stock Edition
Features include...
Based on the LG source
[*]Kernel version 2.6.32.9
Includes EXT4 support (with optional EXT4 conversion on install)
Includes CIFS and TUN modules
Two downloads area available, one for users who wish to stay on EXT3 and one for users who would like their device converted to EXT4 on install (without data loss).
r4 DOWNLOAD - EXT4 version (ROMraid Load Balancing) - MD5: 55470db6a9cb5a88716210de5afbfbb1
r4 DOWNLOAD - EXT3 version (ROMraid Load Balancing) - MD5: ae9d85a37bb6fe439f12066d20345df8
Installation should be carried out via ClockworkMod, please do a backup first! This kernel should be compatible with all stock and custom ROMs.
Enjoy!
P
PS I will be posting the full sources on my GitHub in due course.
keep up the great work paul
Does this change alot?
Redshark976 said:
Does this change alot?
Click to expand...
Click to collapse
Fastest kernel I used!
3400 quadrant, without overclock! Very snappy
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
kelvin_tan said:
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
Click to expand...
Click to collapse
In Pimp my CPU, use the stress test to see if its stable. Use the settings without saving it so you dont boot with those settings. But just to make sure, make a backup of the rom if absolute everything f*cks up.
Sent from my LG-P990 using Tapatalk
Currently I cant even run a CPU Stress Test. When I do, the application will be forced closed.
Do take note that I havent flashed in this new kernel yet.. Using 2.6.32.8 atm
I flashed this Kernel with Stock ROM, but I found that my existing Pimp my CPU not work anymore. Please suggest use with version is fine, Thanks.
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
What advantages are their of converting to ext4? Looking for a good kernel current running modaco fr17 will this be ok?
Sent from my LG-P990 using XDA Premium App
Please delete...
salisbury_steak said:
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
Click to expand...
Click to collapse
it's not a OC kernel so its normal that PimpMyCpu not work...
ilos said:
it's not a OC kernel so its normal that PimpMyCpu not work...
Click to expand...
Click to collapse
I'm actually not looking for an OC, I was looking for a UV.
Sorry if it is a noobish question but wat advantage does this bring over stock kernel?
Sent from my LG-P990 using Tapatalk
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
salisbury_steak said:
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
Click to expand...
Click to collapse
doesn't seem to be compatible with v10d (Philippines)...
Thanks for the confirmation pare! :-D
salisbury_steak said:
Thanks for the confirmation pare! :-D
Click to expand...
Click to collapse
no problem. i hope we get an updated version of this kernel...
is this working for MoDaCo FR19 Fear Edition 12.2 ROM? because i get stuck at the lg logo.. or maybe can someone list down the exact steps to flash this kernel..
Im using a gingerbread v20e rom right now and on stock kernel my boot time is about 1 min max, iv recently installed neoblaze and my boot time is over 4 mins.
Can someone give me a list of kernels that will work with my rom so i can find the best one? the search function is pretty useless because without knowing the name of the kernel ill never find it.
Rom: [[ROM] New Rom 2.3.4 GB v20E (24-08-11)
Baseband 0405
GRJ22
Imperticus said:
KERNELS
1. vorkKernel for CM - By Benee & co.
Link : http://forum.xda-developers.com/showthread.php?t=1059910
2. SwiftExtreme for stock/MCR - By fajared
Gingerbread : http://forum.xda-developers.com/showthread.php?t=1264135
Froyo : http://forum.xda-developers.com/showthread.php?t=1223846
3. NeoBlaze for stock/MCR (Froyo and Gingerbread) - By Imperticus
Link : http://forum.xda-developers.com/showthread.php?t=1200726
4. EternityProject Kernel - By kholk
Link : http://forum.xda-developers.com/showthread.php?t=1029799
Click to expand...
Click to collapse
Taken directly from the {Start here} Thread in the dev section. Not sure which of them that will work on v20e. But surely some of them wouldn't mind that you test and maybe report back your experience in each thread.
Cant really think about any other kernels right now ether for that matter.
lintz said:
Taken directly from the {Start here} Thread in the dev section. Not sure which of them that will work on v20e. But surely some of them wouldn't mind that you test and maybe report back your experience in each thread.
Cant really think about any other kernels right now ether for that matter.
Click to expand...
Click to collapse
hmm so just neoblaze and swiftextreme, neoblaze seems to take forever too boot when i have that on my phone but swiftextreme is OC to 1.2ghz on boot...dont like that. Not much to pick from.
Edit that's a rom not the kernel...its impossible to find anything in this forum wheres the thread for the swiftextreme kernel only.
Hmm he have 4 stand alone kernel links but only seems to be oc kernels 2 are 1,2Ghz and the other 2 are 1,4Ghz.
They are at the bottom of each rom ver. Right bellow the rom download link.
Yeah noticed soon after posting they didn't work had to restore a backup.
Seems only neoblaze works with this rom but it causes some unwanted loooooong startups so looks likebill have to stick with the stock kernel till i get a response on that issue.
Sent from my LG-P990 using XDA Premium App
eraldo said:
hmm so just neoblaze and swiftextreme, neoblaze seems to take forever too boot when i have that on my phone but swiftextreme is OC to 1.2ghz on boot...dont like that. Not much to pick from.
Edit that's a rom not the kernel...its impossible to find anything in this forum wheres the thread for the swiftextreme kernel only.
Click to expand...
Click to collapse
CMIIW : swift extreme just for froyo.. on GB you must use swift ROM if you want to use swift extreme kernel..
which program i use to clock my o2x? i have rooted ics v30b (india)
setcpu doesnt work
You can't overclock with the stock kernel. Go to the development section and pick a custom ICS kernel, then you will be able to overclock.
Sent from my LG-P990 using Tapatalk 2
do u have any suggestion for kernel/rom? stable, and all functionality?
max21ns said:
do u have any suggestion for kernel/rom? stable, and all functionality?
Click to expand...
Click to collapse
You can try kob 0.5, or civz kernels....but if you have no init.d support....not sure if all the functions would....
Better do a nandroid backup and then try this.....just to be safe
O2X with Magical ICS ROM and magnificent kernels from my buddies
max21ns said:
do u have any suggestion for kernel/rom? stable, and all functionality?
Click to expand...
Click to collapse
Try CivZ SkyWalker, you can OC up to 1.5Ghz (but it's too high, i recommend 1.3 Ghz) and you can OC your GPU up to 400Mhz.
SREEPRAJAY said:
You can try kob 0.5, or civz kernels....but if you have no init.d support....not sure if all the functions would....
Better do a nandroid backup and then try this.....just to be safe
O2X with Magical ICS ROM and magnificent kernels from my buddies
Click to expand...
Click to collapse
If you install my kernel init.d is supported and the needed files are installed, but the user of a full stock rom will need to install busybox and be rooted .
Spennacchionr said:
Try CivZ SkyWalker, you can OC up to 1.5Ghz (but it's too high, i recommend 1.3 Ghz) and you can OC your GPU up to 400Mhz.
Click to expand...
Click to collapse
GPU scales itself to max 450MHz it is not something the user controls. Read info in kernel thread.