Database Develop

[KERNEL] 4 Apr r4: MoDaCo Custom Kernel for the LG 2X - Stock Edition (2.6.32.9)

This topic is for my MoDaCo Custom Kernel for the LG Optimus 2x - Stock Edition
Features include...
Based on the LG source
[*]Kernel version 2.6.32.9
Includes EXT4 support (with optional EXT4 conversion on install)
Includes CIFS and TUN modules
Two downloads area available, one for users who wish to stay on EXT3 and one for users who would like their device converted to EXT4 on install (without data loss).
r4 DOWNLOAD - EXT4 version (ROMraid Load Balancing) - MD5: 55470db6a9cb5a88716210de5afbfbb1
r4 DOWNLOAD - EXT3 version (ROMraid Load Balancing) - MD5: ae9d85a37bb6fe439f12066d20345df8
Installation should be carried out via ClockworkMod, please do a backup first! This kernel should be compatible with all stock and custom ROMs.
Enjoy!
P
PS I will be posting the full sources on my GitHub in due course.

keep up the great work paul

Does this change alot?

Redshark976 said:
Does this change alot?
Click to expand...
Click to collapse
Fastest kernel I used!
3400 quadrant, without overclock! Very snappy

Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.

kelvin_tan said:
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
Click to expand...
Click to collapse
In Pimp my CPU, use the stress test to see if its stable. Use the settings without saving it so you dont boot with those settings. But just to make sure, make a backup of the rom if absolute everything f*cks up.
Sent from my LG-P990 using Tapatalk

Currently I cant even run a CPU Stress Test. When I do, the application will be forced closed.
Do take note that I havent flashed in this new kernel yet.. Using 2.6.32.8 atm

I flashed this Kernel with Stock ROM, but I found that my existing Pimp my CPU not work anymore. Please suggest use with version is fine, Thanks.

Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...

What advantages are their of converting to ext4? Looking for a good kernel current running modaco fr17 will this be ok?
Sent from my LG-P990 using XDA Premium App

Please delete...

salisbury_steak said:
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
Click to expand...
Click to collapse
it's not a OC kernel so its normal that PimpMyCpu not work...

ilos said:
it's not a OC kernel so its normal that PimpMyCpu not work...
Click to expand...
Click to collapse
I'm actually not looking for an OC, I was looking for a UV.

Sorry if it is a noobish question but wat advantage does this bring over stock kernel?
Sent from my LG-P990 using Tapatalk

This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?

salisbury_steak said:
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
Click to expand...
Click to collapse
doesn't seem to be compatible with v10d (Philippines)...

Thanks for the confirmation pare! :-D

salisbury_steak said:
Thanks for the confirmation pare! :-D
Click to expand...
Click to collapse
no problem. i hope we get an updated version of this kernel...

is this working for MoDaCo FR19 Fear Edition 12.2 ROM? because i get stuck at the lg logo.. or maybe can someone list down the exact steps to flash this kernel..

SetCPU on o2x, MIUI

Greetings Forum
I read that I could underclock my CPU for longer battery times with setCPU, however it asks me for what device and gives me a list of.. Stuff.
Which one do I choose?
I'm on MIUI, does the kernel allow over/underclocking?
Kind Regards
~Neefy

Neefy said:
Greetings Forum
I read that I could underclock my CPU for longer battery times with setCPU, however it asks me for what device and gives me a list of.. Stuff.
Which one do I choose?
I'm on MIUI, does the kernel allow over/underclocking?
Kind Regards
~Neefy
Click to expand...
Click to collapse
stock kernel can do underclocking i think.
you can choose the option Tegra, i did this with setCPU aswell

Thank you will try this
I've got it set to 600 max 200 min, is this ok? I'm not quite sure how all of this works, pretty sure this is underclocking (y/n?)
However, will this give me more batterylife?

Bump
Sent from my Optimus 2X using XDA App

Why my phone can't overclock?It's version of lge v10d.
-------------------------------------
Sent from my LG-P990

stock kernel not support to OC, try vorkkernel .

okries said:
stock kernel not support to OC, try vorkkernel .
Click to expand...
Click to collapse
on v10d you can't use vorkkernel, try neoblaze kernel

Cino86 said:
on v10d you can't use vorkkernel, try neoblaze kernel
Click to expand...
Click to collapse
no no no...
neoblaze not support miui..
look he is on miui right now..
if u apply neoblaze on miui and u will get bootloop..
im on miui and i use vorkkernel..

Sorry, wrong quote.. It was a reply to -Lovin'you!- post.
On miui or cyanogen vorkkernel is the best, for stock rom you had to use neoblaze or swiftextreme

On MIUI (which is based on Cyanogen Mod) use VorkKernel
On Stock and and Modaco Custom Roms (and other roms based in stock) use Neoblaze or Swiftextreme.
These allow overclocking. And I suggest you trying to use Pimp My CPU.

[PRO][KERNEL] Riyal-based kernel with better touchscreen precision & SE logo

Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:

What is Stock ICS 538? or you mean 587

the recovery are same or did u update it too ?

I have to install the img with fastboot ... And I have everything right???

Thanks for this kernel. will give it try one of these days

New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77

[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules

lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same

josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM

Why now 4px? Was Gingerbread not 2px?

paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try

I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?

Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh

rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.

I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.

dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:

xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.

dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.

Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?

Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app

[KERNEL][CM10] CM10 kernel for ICS bootloader (RAM hack,OC)

This kernel is no longer being updated. Please refer to kowalski kernel thread for CM10 ROMs.
Presenting CM10 kernel built from source with ramhack and OC/UV support by wkpark
Only for the new (unlocked ICS) bootloader!
This is RC's kernel, with patches by wkpark for ramhack and OC/UV. Supports OC upto 1.5 GHz.
Thanks to them for all their work. Also, thanks to pengus77 for bringing CM10 to the new bootloader
Built using my guide over here
Uses spica's HP supersonic toolchain
Works with CM10/MIUIv4 ROM on new bootloader only
Download links:
New and recommended powersaver version!
Includes pengus77's wifi drain fix (All credit to him for that)
Non-OC, to increase battery life and stability
RAM hack values 24 MB, 32 MB, 48 MB for increased smoothness
New experimental governors are absent in this ROM, which is meant to be a stable version for daily usage. The new governors have not been properly tested yet and are unlikely to be used by most of the users. They may be included in later builds after more testing. If you want to use them, flash the experimental kernel on the previous page.
This is the version recommended for daily usage. Try the 48 MB one first, and if camera gives problems, then try a lower RH value.
Download link for stable, powersaver version
Link to latest experimental version
Download link for older experimental versions
This is the link to my folder with all kernels for the new bootloader so far, in case you want to try some other version. Ramhack values are mentioned in the file names, and if it supports OC (not every phone will like OC) it is also mentioned in the file name.
Thanks to RC and wkpark, this would not be possible without them.
Warning:
I am not responsible if anything goes wrong with your phone.
If your phone does not like OC/UV, or freezes when overclocked, reduce the max frequency or dont use the OC version of the kernel.
If apps like camera give problem, try to use a version with reduced ramhack value.
To be flashed over the ROM without wiping data. Wipe only cache and dalvik cache
If you are having problems with the new kernel and wish to revert back to the stock kernel, flash your ROM again
Credits:
arcee and the rest of the CM team. Its their work it is based on
Donate to RC
wkpark for cracking the bootloader, new his patches, without which, there would be no ramhack or OC/UV
Donate to wkpark
pengus77 for bringing CM10 to the new bootloader and wifi battery drain fix.
This wouldn't be possible without him
spica1234 for his wonderful HP Supersonic toolchain
benee for his anykernel updater for star, and for all his work
Other devs for all their work (PM me if I forgot someone!)
Source: https://github.com/rugglez

Changelog:
29/12/12:
New version built with spica's supersonic HP toolchain
Integrated pengus77's latest (v3) wifi drain fix + bsod fix
27/12/12:
Experimental version released with new CPU governors (smartass v2 and hotplug), and simple I/O scheduler (default is still cfq), max frequency=1.2 GHz
Power saver version released without OC or new governors, and with pengus77's wifi battery drain fix
26/12/12:
Initial release
Max clock frequency is 1.5 GHz

Trying the 32mb oc kernel, seems ok so far, will report back any oddities,
I'm on penguss cm10.

i tested..............

Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Regards,
Orgler

Thank u guy's! i will try new_CM10_kernel_1225_32M_OC.zip and report back!

angel_boulevard said:
i tested..............
Click to expand...
Click to collapse
And....?
orgler said:
Great news. Just two little questions:
- does this work with cm10.1 as well?
- are the Wifi drain patches from pengus77 included?
Click to expand...
Click to collapse
You could try it with cm10.1 but im not sure if it would work. Take a backup first. Wifi drain patches will be included with his permission and when he feels it is the right time (after the testing phase and all)

thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time

included wireless.ko is the one patched by pengus? thank you in advance
edit: just checked, it's not the patched one

First impressions are good! Not much room for UV as 1ghz is already at 1000mV which is quite low already I think? But that is not important, just an observation.
Thanks Rugglez. Been waiting a while for an OC kernel on CM10 and no call bug either. This is the future for our phone I think.

I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
I just checked with "CPU spy" and yes it is hitting 1.5Ghz even though I have it set lower than that.

Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
anjo88 said:
thanks for the hard work i think u can put like a changelog in thread and the features of kernel listed just avoid people asking same thinks all the time
Click to expand...
Click to collapse
Thanks for the idea, will add it.

rugglez said:
Noted. Will release 1.2 GHz and 1.4 GHz versions separately from next time
With pengus77 permission now, i'll integrate his wifi drain fix too.
Probably tomorrow
Thanks for the idea, will add it.
Click to expand...
Click to collapse
So we waiting to test

Can you put in the next update some more CPU governers and I/O scheduler?

zerocoolriddler said:
I ´m testing the 48M_OC-Kernel on CM10.
I set max OC to 1,2GHz, but Antutu CPU Master shows Peaks at 1,5GHz! The Kernel is always scaling in its full available Range.
I tested it with different Settings and Gouvenours, nothing helps.
Click to expand...
Click to collapse
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Took one pic and gallery FCed and phone soft rebooted.
With OC 32mb kernel camera and video recording is working.
Sent from my LG-P990 using xda premium

lgnd said:
Same here oc set to 1.2 but it's scaling up to 1.5 seems stable anyway.
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
I do a OC with default cm10 function and on antutu say 1200!

Sorry for being off topic. I really salute new generation of developers for optimus2x who never let us feel our main devs/modders have left. You guys are doing a fabulous job. Thanks to you all.

Gps does not working.
Tested with igo and maps.
Sent from my LG-P990 using Tapatalk 2

rugglez,
Please add pulse boost and hotplug governor. Thanks.

why thread closed of Nemesis X rom

whats the matter?
y its closed?
y development stopped?

AW: why thread closed of Nemesis X rom
read the last post
http://forum.xda-developers.com/showthread.php?t=2059092
thread closed as the development stopped
Gesendet von meinem LG-P970 mit Tapatalk 2

look guys , because everyone is asking about this ,, im currently finished all the rom stuff except for the kernel ,, i cant find a stable kernel to use ,, everyone is used drains battery while device is on\suspend ,, if u want a good rom just wait till i get a good kernel

rrgrrg said:
look guys , because everyone is asking about this ,, im currently finished all the rom stuff except for the kernel ,, i cant find a stable kernel to use ,, everyone is used drains battery while device is on\suspend ,, if u want a good rom just wait till i get a good kernel
Click to expand...
Click to collapse
Why not use StrongAccrod? It is sooo stable!

WIIstpM said:
Why not use StrongAccrod? It is sooo stable!
Click to expand...
Click to collapse
what version to be exact and send me a link for it

rrgrrg said:
what version to be exact and send me a link for it
Click to expand...
Click to collapse
Toccata Version 0.2 - http://d-h.st/Xdh
for a good balance between performance and battery life use smartassv2/ sio
you can ask Hellmanor for more informations

glückspilz said:
Toccata Version 0.2 - http://d-h.st/Xdh
for a good balance between performance and battery life use smartassv2/ sio
you can ask Hellmanor for more informations
Click to expand...
Click to collapse
I probably would not go for this older version, OK it has higher OC and so runns probably faster if it runs at all.
If you really want to take a OC kernel from Hellmanor I would go for one of those:
Download Adagio 0.1a - Stable version - http://d-h.st/cCW or/and
Download Adagio 0.1a - Stable version HIGH VOLTAGE - http://d-h.st/Uck
There is just this problem when somebody makes a ROM he probably wants a lot of ppl to use it and when you use a OC kernel that some ppl can't even get to run it's not to good. But yes speek with Hellmanor maybe he makes a version of his kernel with no or lower OC for the ROM and when that works they can always try a other version with higher OC.

SaschaKH said:
I probably would not go for this older version, OK it has higher OC and so runns probably faster if it runs at all.
If you really want to take a OC kernel from Hellmanor I would go for one of those:
There is just this problem when somebody makes a ROM he probably wants a lot of ppl to use it and when you use a OC kernel that some ppl can't even get to run it's not to good. But yes speek with Hellmanor maybe he makes a version of his kernel with no or lower OC for the ROM and when that works they can always try a other version with higher OC.
Click to expand...
Click to collapse
i contacted him for a special kernel with only gpu oc and some stuff regarding battery and ondemand govenor ,, if it gets well i will post my rom asap ,, if not i will use gabwerkz's echlon kernel ,, i know some of u will have gps problems but i will try to fix it :laugh: ,,but thats if hellmanor's kernel isnt good which is 99.9% not gonna happen

Well I am using Toccata 0.3 and it is unbelievably smooth and very battery efficient (phone goes in deep sleep after 5secs) also the governors he implemented and the freq table used are good too!
I recommend you try Adagio 0.1a High Voltage
Sent from my LG-P970 using Tapatalk 2

I will try with that kernel ...
Sent from my LG-P970 using Tapatalk 2

Go ahead release it with any working kernel
@rrgrrg
We can try different kernels available (StrongAccord, ZG or whatever). Later we can feedback which one works best. Later you can release a patch if you want.
By the way, there is a new V30c released by LG. Feedback is good, see if you can integrate...Thanks

ok now hellmanor made me a kernel with these specs based on v30c
-Ondemand tweaked for more battery
-some battery tweaks
-gpu OC to 280mhz
-leds are only white ,,its better for the ui :fingers-crossed:
Click to expand...
Click to collapse
im testing it now ,, if it goes well i will publish my rom ,, if not i will use Adagio 0.1a High Voltage

rrgrrg said:
ok now hellmanor made me a kernel with these specs based on v30c
im testing it now ,, if it goes well i will publish my rom ,, if not i will use Adagio 0.1a High Voltage
Click to expand...
Click to collapse
And please use a dark theme. White is too bright and annoying. Ics is supposed to be dark.
Sent from my LG-P970 using Tapatalk 2

Personall I like white UI :/ It's what makes Lg stad out somehow in terms of ICS
Btw having smartassv2 and conservative in the kernel would be great! conservative for screen off (set in setcpu) and smartassv2 is more battery efficient than ondemand... And why no blue leds I don't really mind but... it makes our OB looks like any other Android phones lol

ykumar00 said:
And please use a dark theme. White is too bright and annoying. Ics is supposed to be dark.
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Why dark theme? I really like the white theme, it is very nice. Keep it in the next ROM please :good:

Go with the majority I guess

ykumar00 said:
Go with the majority I guess
Click to expand...
Click to collapse
Your white optimus black would look fabulous with a white Ui

WIIstpM said:
Your white optimus black would look fabulous with a white Ui
Click to expand...
Click to collapse
Haha I didn't think of that! Maybe it will. We'll see. XD

rrgrrg said:
ok now hellmanor made me a kernel with these specs based on v30c
im testing it now ,, if it goes well i will publish my rom ,, if not i will use Adagio 0.1a High Voltage
Click to expand...
Click to collapse
and ... how is the new kernel?`are you satisfied with it or are you going to use another kernel?

glückspilz said:
and ... how is the new kernel?`are you satisfied with it or are you going to use another kernel?
Click to expand...
Click to collapse
hellmanor is working now on fixing the viperx kernel :good: