Database Develop

{HELP} touch screen problem!!!

I am facing touch screen problem when ever I install CyanogenMod (not happening with Stock Rom) my touch screen has become over responsive.
As i press any key (or not) the phone detects key press. It is mostly happening in lower left (where * key is present)
Please some buddy solve the problem

sbajpai.bajpaisukrit said:
I am facing touch screen problem when ever I install CyanogenMod (not happening with Stock Rom) my touch screen has become over responsive.
As i press any key (or not) the phone detects key press. It is mostly happening in lower left (where * key is present)
Please some buddy solve the problem
Click to expand...
Click to collapse
cyanogenmod 7.2 or 7.1 ?
right now, i am using ics final (cm 7.2) and the touch is working fine
i faced similar issues before though. dont know if it helps, but go to /system/etc/init.d
and there maybe some scripts and tweaks. try to remove them and see.

amrith.28 said:
cyanogenmod 7.2 or 7.1 ?
right now, i am using ics final (cm 7.2) and the touch is working fine
i faced similar issues before though. dont know if it helps, but go to /system/etc/init.d
and there maybe some scripts and tweaks. try to remove them and see.
Click to expand...
Click to collapse
in both 7.1 & 7.2.
Please explain in detail as i am a newbie

i also have the same problem, esp. when i flashed a new kernel its has become more over responsive which gives me a headache

try flashing another custom rom?

sbajpai.bajpaisukrit said:
in both 7.1 & 7.2.
Please explain in detail as i am a newbie
Click to expand...
Click to collapse
i am not sure what the solution is, but u can try once.
use root explorer (or similar file manager)
go to /system/etc/init.d
now usually (if no tweaks and scripts are enabled) there will be some files.. like 00banner,01sysctl....20userinit
if there are any other files after 20userinit, delete them.
then reboot. see if its any better.

clarkleal said:
i also have the same problem, esp. when i flashed a new kernel its has become more over responsive which gives me a headache
Click to expand...
Click to collapse
so, how do you fix the sensitivity issue? i am also having the issue which is really annoying.

To all:
I'm 99% percent sure the problems you guys face are because of the OC kernel in the CM. Can you try flashing a non-OC kernel and determine whether the results differ?

In my case with non-OC kernel the problem still occurs. The only solution is underclock processor to 735MHz. Any ideas?
edit:
connect phone to the charger solve the problem too ;X WTF? even if i overclock to 850MHz, touchscreen works perfectly!

xfamo7z said:
restart your phone it should fix
Click to expand...
Click to collapse
Lolz. You must be kidding.
All : Even i am facing same issue after flashing Gingercrutz (only 2.3),ICS SUNDAY and Infinity rom. Still no solution for that.

Touchscreen Problem Fix
i had the same problem of multiple touches...b'coz of over sensitivity while using cm7.2 with oc kernel.
after flashing a non oc kernel either from ketut's or an0nym0us u can fix the prob.
thats how i fixed it.
Note:- Don't compare ur processor with other's(thinking other's can do oc without ny prob but not mine ..) b'coz every processor is different in some sense.
That's why some of them oc to even 960MHz and remain stable while some can't even take 820MHz(no wonder i belong to this category )
k so here u go :
ketut's thread :http://forum.xda-developers.com/showthread.php?t=1296905
cm-7.1-kernel-2.6.35.7-perf-CL562111.zip:download and flash this kernel using cwm (rem to mount system b4 flashing)
an0nym0us_ thread: http://forum.xda-developers.com/showthread.php?t=1292200
zImage-Mod.v1.0.zip : flash this using cwm (mount system b4 flashing)
Note:- v1.1 is also thr but v1.0 is more stable (can find out in thread)
Plz press thanks if I have helped

I no longer know what to do. Non-oc kernel help a liittle but not completely solve the problem. Still helps me only underclock MHz to 735.

adinq said:
I no longer know what to do. Non-oc kernel help a liittle but not completely solve the problem. Still helps me only underclock MHz to 735.
Click to expand...
Click to collapse
which rom and kernel are u using?
if u r on zImage Mod kernel then flash ketut's kernel and see.

dm08b002 said:
which rom and kernel are u using?
Click to expand...
Click to collapse
CM7.2 rc0 on KT7 , zImage , clock set to 735MHz and the touchscreen works OK, but I lose a few MHz
dm08b002 said:
if u r on zImage Mod kernel then flash ketut's kernel and see.
Click to expand...
Click to collapse
this doesn't help

dm08b002 said:
i had the same problem of multiple touches...b'coz of over sensitivity while using cm7.2 with oc kernel.
after flashing a non oc kernel either from ketut's or an0nym0us u can fix the prob.
thats how i fixed it.
Note:- Don't compare ur processor with other's(thinking other's can do oc without ny prob but not mine ..) b'coz every processor is different in some sense.
That's why some of them oc to even 960MHz and remain stable while some can't even take 820MHz(no wonder i belong to this category )
k so here u go :
ketut's thread :http://forum.xda-developers.com/showthread.php?t=1296905
cm-7.1-kernel-2.6.35.7-perf-CL562111.zip:download and flash this kernel using cwm (rem to mount system b4 flashing)
an0nym0us_ thread: http://forum.xda-developers.com/showthread.php?t=1292200
zImage-Mod.v1.0.zip : flash this using cwm (mount system b4 flashing)
Note:- v1.1 is also thr but v1.0 is more stable (can find out in thread)
Plz press thanks if I have helped
Click to expand...
Click to collapse
Thanks Machi.. It worked.

YA non oc kernel worked !!!solved!!!

adinq said:
I no longer know what to do. Non-oc kernel help a liittle but not completely solve the problem. Still helps me only underclock MHz to 735.
Click to expand...
Click to collapse
i have search many thread in SGA section and finally find this thread and your solution.. thanks bro it's worked !!
i'm facing same problem with custom rom with OC or nonOC kernel.. i have try firekernel but problem still there.. then i set my cpu to 729, reboot, and touchscreen feel better !
this is my galaxy ace and cym 7.2 stable

[MOD] [CM7] Use Custom Kernel's with latest CM7 Nightlies

Back in February, there were some updates to CM7 that broke using custom kernels. The last nightly that worked with custom kernels was #58. After some digging around, I found out that it is the graphics lib's that cause the problem.
This mod replaces the graphics driver lib's in your CM7 rom with an older version that is compatible with custom kernels such as Nova.
WARNING: DO NOT use this mod with Huexx's new 4.1 kernel or with a new stock cm7 kernel.
Tested and working fine on Temasek #62 with Nova 11c.
To Install:
1. Flash CM7 rom
2. Flash P970-CM7-UseCustomKernel-MOD
3. Flash custom kernel
4. Power off, wait 5 seconds, power on (if you choose reboot from cwm, occasionally it will lock at the LG logo. If this happens, pull the battery then power on again. Powering off avoids this bug).
Enjoy.
Update: This seems only to be working with Nova 11c at the moment. Use that one until I can find a workaround for the others.
Update2: I just got Nova v7 working using Apold's Kernel Injector, so the problem was obviously with the ramdisk. This process is a bit more complicated, so I'm going to mod Nova v7 and Huexx's v4 kernels, then post modded working versions of those. If anyone wants one of the other versions, please let me know.
The process to do it yourself is:
1. Unzip kernel
2. Use Racer Kitchen v2 to separate the ramdisk and kernal http://android.modaco.com/topic/340710-tool-edit-bootimg/
3. Use kernel injector from Nova 11c and mod the installation script as necessary, including the older graphics lib's.
Update 3: Uploaded a modified Nova v7 CFS to work with the latest CM7 nightlies. This should also work with cwm touch (confirmation required). To Install:
1. Flash any CM7 rom
2. Flash P970-CM7_NovaKernel_v07_CFS-Modded_for_latest_CM7.zip
3. Reboot (If it locks at the LG logo, pull the battery, it should work fine second time).
Please note that I cannot fix bugs in this kernel, there is no source. Use it as it is, or don't use it. Thanks to Knzo for this brilliant kernel, thanks to Apold for his fantastic kernel injector.
For more info on the Nova Kernel, please check the original thread: http://forum.xda-developers.com/showthread.php?t=1276645
Update 4: Uploaded a modified Huexx v4 kernel to work with the latest CM7 nightlies. This should also work with cwm touch (confirmation required). To Install:
1. Flash any CM7 rom
2. Flash P970-CM7_HuexxxKernel_V4-Modded_for_latest_CM7.zip
3. Reboot (If it locks at the LG logo, pull the battery, it should work fine second time).
Please note that I cannot fix bugs in this kernel. Use it as it is, or don't use it. Thanks to Huexx for this brilliant kernel, thanks to Apold for his fantastic kernel injector. Huexx said a few days ago that if he has time, he'll port his Diana Kernel to CM7. Three cheers for Huexx!
For more info on the Huexx Kernel, please check the original thread: http://forum.xda-developers.com/showthread.php?t=1332311
Update 5: For modded Nova v11c kernel, please use re4lsk's in the Nova Kernel thread: http://forum.xda-developers.com/showpost.php?p=24074871&postcount=1100 Thanks re4lsk.
Update 6: WARNING:
This mod is for use with old kernels only, such as Nova v7, Nova v11c or Huexx's v4, using it with a new kernel with brick it, requiring flashing through smartflash.
DO NOT use this mod with Huexx's new 4.1 kernel or with a new stock cm7 kernel.

What if we add that mod to Nova kernel zip and change the updater script?
Trolling in the deep

re4lsk said:
What if we add that mod to Nova kernel zip and change the updater script?
Trolling in the deep
Click to expand...
Click to collapse
That should work fine. If your going to do that, then you might want to mod the updater script to work with cwm touch as well.

Maybe if they had published their sources someone could add the latests commits done to the CM7 kernel and recompile the kernel.

I really don't know much about code, but i'll try to make Nova compatible.
Trolling in the deep

re4lsk said:
I really don't know much about code, but i'll try to make Nova compatible.
Click to expand...
Click to collapse
Do you mean compatible with your LFD rom? If so, then it should work as its based on CM7.

Huexxx said:
Maybe if they had published their sources someone could add the latests commits done to the CM7 kernel and recompile the kernel.
Click to expand...
Click to collapse
Completely agree. Modding something is a lot easier than creating from scratch.

Moded nova kernel
Compatible to cm, now I'm in RC1, but yeah that will make it available for all cm based roms, and ssince Nova is not my work, if it works I'll publish it inside Nova thread.
Well. I've made it, now i need someone to test this
@brave tester: standard procedure to flash of kernel
NO WIPE but make sure you make a nandroid.
MOD HERE

I have the Temasek # 62, download P970-CM7-UseCustomKernel-MOD, but say you install the custom kernel, what is that?

Bab0 said:
I have the Temasek # 62, download P970-CM7-UseCustomKernel-MOD, but say you install the custom kernel, what is that?
Click to expand...
Click to collapse
Custom kernels offer better performance/battery/stability than the stock CM7 kernel. They offer lots of mods/tweaks to make things better. Stock CM7 kernel is more a general kernel, designed to run on multipy devices with minimum changes.
There are two custom kernels for CM7 on our Optimus Black:
Nova Kernel : http://forum.xda-developers.com/showthread.php?t=1276645
Huexx's Kernel: http://forum.xda-developers.com/showthread.php?t=1332311
Check the corresponding threads for more info.

need a beta tester for post number 8

re4lsk said:
need a beta tester for post number 8
Click to expand...
Click to collapse
What I need to install? the mod and after the NovaV11c?

dcop7 said:
What I need to install? the mod and after the NovaV11c?
Click to expand...
Click to collapse
No. It looks like he has added my mod into the nova kernal installation script. If it works, then you need to flash CM7, then the modded nova.
This is not really necessary, the whole point of this mod is to easily allow flashing any custom kernel on any CM7 rom. Combining this mod and nova will save you a couple of seconds flashing time in cwm, nothing more.

re4lsk said:
need a beta tester for post number 8
Click to expand...
Click to collapse
Well, it booted OK. So I guess it works
Good work!

dcop7 said:
Well, it booted OK. So I guess it works
Good work!
Click to expand...
Click to collapse
great, now test it for a few hours and say if it all works ok, BTW if you are gonna keep submiting bugs at CM issue tracker remove the kernel.

re4lsk said:
great, now test it for a few hours and say if it all works ok
Click to expand...
Click to collapse
So far so good, the only problem is the G button doesn't always wake the phone But is a known bug, right?
re4lsk said:
BTW if you are gonna keep submiting bugs at CM issue tracker remove the kernel.
Click to expand...
Click to collapse
Yeah, I'm aware

jason600 said:
Custom kernels offer better performance/battery/stability than the stock CM7 kernel. They offer lots of mods/tweaks to make things better. Stock CM7 kernel is more a general kernel, designed to run on multipy devices with minimum changes.
There are two custom kernels for CM7 on our Optimus Black:
Nova Kernel : http://forum.xda-developers.com/showthread.php?t=1276645
Huexx's Kernel: http://forum.xda-developers.com/showthread.php?t=1332311
Check the corresponding threads for more info.
Click to expand...
Click to collapse
Well! then look, I have the ROM TEMASEK # 62, just install the kernel step P970-CM7-UseCustomKernel-MOD and the HUEXXX to SD .. INSTALL 1° P970-CM7-UseCustomKernel-MOD 2 ° INSTALL HUEXXX Kernel (huexxx111104-V4.zip) 3 ° Restart and hope ... these are the steps?

Bab0 said:
Well! then look, I have the ROM TEMASEK # 62, just install the kernel step P970-CM7-UseCustomKernel-MOD and the HUEXXX to SD .. INSTALL 1° P970-CM7-UseCustomKernel-MOD 2 ° INSTALL HUEXXX Kernel (huexxx111104-V4.zip) 3 ° Restart and hope ... these are the steps?
Click to expand...
Click to collapse
yep you can do that or test my mod of nova 11con post number 8
traduccion
si esos son los pasos para hacerlo, pero tambien puedes probar mi mod del kernel NOVA que esta en el post numero 8

Bab0 said:
Well! then look, I have the ROM TEMASEK # 62, just install the kernel step P970-CM7-UseCustomKernel-MOD and the HUEXXX to SD .. INSTALL 1° P970-CM7-UseCustomKernel-MOD 2 ° INSTALL HUEXXX Kernel (huexxx111104-V4.zip) 3 ° Restart and hope ... these are the steps?
Click to expand...
Click to collapse
Probably not. I've just tried with Nova v7 and it sticks at the LG logo. Hueuxx's v4 will probably do the same.
Use Nova v11c for now, I'll try and get the other working later. I think that Nova 11c is working because of Apold's Kernel injector.

re4lsk said:
need a beta tester for post number 8
Click to expand...
Click to collapse
Not Work
assert failed; mount ("ext4, "EMMC" "/dev/block/mmcblk0p10","/cache")

[ROM][Stock GB 2.3.7]Stock Apanda rom

Here's the stock Apanda rom Android GB 2.3.7. I couldn't know anything about this rom as it won't let me pass the lockscreen. Lockscreen was similar to the spice stock rom. Don't know if it is any different.
Mod : edit removed this link
I flashed it but seems like the touch screen is not compatible with Spice mi 410.
[Edit] Flash 0.35 kernel(sharp/tj) to make touchscreen work -> Thanks to Abenagiel.
This didn't seem to be any better than sharp rom.
Before flashing this rom be sure to backup your imei. Me and Demonskill had problems of unknown imei number when we flashed the rom and tried to revert back using cwm restore. My personal suggestion, before you do cwm restore make sure to flash tj's rc3. Find more info about imei backup using 5iromtoolbox take a look at post by http://forum.xda-developers.com/showpost.php?p=28096182&postcount=3. Thanks to LibertyMonger
Steps to flash this rom:
(1) Go to download mode and Flash this rom via SUT.
(2) Go to download mode and place the recovery.img from tj_style for the new kernel 0.35
(3) Place this 0.35 sharp kernel on sd card https://www.dropbox.com/s/c2myh6s2kgb9wi6/sharp_Kernel.zip
(4) Flash the zip via recovery.
Mirrors for the rom, recovery and 0.35 kernel can be found in the post. Thanks to aloklike- MOD edit: removed link
MOD EDIT : ok guys and the OP
i see a lot of problems i think for the safety of all i am closing this thread and removing the links. if everything is ok PM me and ill open this thread

yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda

abenagiel said:
yup touchscreen doesn't work..
kernel problem..
flash with sharp rom or andro-id rc3 kernel,, and touchscreen will work again..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try

nayneshdev said:
Does that mean flashing 0.35 kernel will fix the touchscreen. and make the rom work i will try
Click to expand...
Click to collapse
yup.. work for me..
Sent from my FIH-FB0 using xda

abenagiel said:
yup.. work for me..
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What

haree said:
hi
sorry slightly confused r u saying if we flash RC3 or sharp and then flash this rom it will work or What
Click to expand...
Click to collapse
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda

abenagiel said:
not like that..
we need to replace the stock kernel with rc3 kernel or sharp kernel to make the touchscreen work..
or maybe we can replace touchscreen files with rc3 or sharp (never try this)
Sent from my FIH-FB0 using xda
Click to expand...
Click to collapse
hi
sorry still confused ok simple question
im right now on the recent kernal ie im using MatBlks CM9
now if i flash this rom will it work
Edit : got my answer on the 1st page not trying ill wait for ur new ROM

its working .....
----deleted----

the file has been deleted, can u re-upload it..
thanks

[ROM]
----deleted----

Op forgot to mention in thread title this is Stock GB 2.3.7
to Install
Flash nb0 with SUTLR
Replace recovery with CWM5.XX
flash sharp Kernel with CWM
reboot

----deleted----

aloklike said:
hey mattBLK,
which kernel are you using with this rom,how is battery life on this rom ..........
Click to expand...
Click to collapse
not sure what original name was i renamed it? i was trying to find in a separate thread but noone posted so i found this.. it has OC upto>1600Mhz and smartassV2. what is the other kernel like that was posted here?
Just noticed the subtle changes in settings with 2.3.7 with added cell broadcast

aloklike said:
uploading on mediafire ..... plz wait .....
here it is ....
Apanda 2.3.7 :: http://www.mediafire.com/?69xvxkbkdcvy6t9
recovery :: http://www.mediafire.com/?dpphpw3r8z3qhmp
kernel :: http://www.mediafire.com/?2w67p3wot3x9w3t
Steps to install :
1. put kernel zip in sdcard
2. install rom via SUT (erase user data option)
3. go to donload mode and replace recovery file
4. install kernel.zip via cwm
Click to expand...
Click to collapse
Try this also, Kernel from Abenagiel's GingerMia V1 it comes with more governor.
Hit Thanks if I help

how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?

cheezzzz said:
how stable is this stock rom running on other. 35 kernels like mia and rc3?
got icv problem? or any bugs?
Click to expand...
Click to collapse
very stable no fc no bugs for me with the kernel im using, camera & camcorder still zooms.. just use another launcher and get rid of all the bloatware/5keyboards

Guess I will have to try this, hope it is more stable than Sharp ROM. Sharp ROM has been rebooting and just had an awful freezeup while playing a basic game. Lost sensor functionality and had to pull battery. I have no luck with any ROM really wish we had one "go-to ROM" that is fully stable.

Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700

tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
(0_0!)
wow the master was here..
there was FB1-FB3 devices??
#tumbennongolom??

tj_style said:
Actually this ROM is for K41 devices, not for FB0/1/3 devices. But since K41 devices is using similiar hardware with FB0, so this ROM is still compatible with our devices
Sent from my W700
Click to expand...
Click to collapse
after flashing this rom i am having issues with unknown imei number.so it seemed like i had lost my imei number, but after flashing rc3 i again recovered it this is the reason why i removed the link but couldnt post this information sooner then this. Those who are using this please backup your imei first using 5iromtoolbox app available on xda also on ideos x5 forum.
Sent from my Desire HD using xda app-developers app

Problems booting to install Roms

Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.

TheMasterMindGT said:
Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.
Click to expand...
Click to collapse
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.32.9 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS and automatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup

nachiketa.ramesh said:
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.35.2 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS andautomatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup
Click to expand...
Click to collapse
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??

TheMasterMindGT said:
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??
Click to expand...
Click to collapse
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom

nachiketa.ramesh said:
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom
Click to expand...
Click to collapse
thank you very much by observation I will look for files on the issues.

Here are the links you can refer to
RC3-
http://forum.xda-developers.com/showthread.php?t=1446449
CK Kernel 0.4d
http://forum.xda-developers.com/showthread.php?t=1728461

Help From .35 kernel to .32 kernel possible?
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks

endlesone said:
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks
Click to expand...
Click to collapse
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy

RC1 from Andro id v3.3 rc1?
vivekb said:
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy
Click to expand...
Click to collapse
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks

endlesone said:
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks
Click to expand...
Click to collapse
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).

=)
k1chy said:
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).
Click to expand...
Click to collapse
thanks for the reply.

After spending all night struggling with installing the kernel achieves install this ROM but I use the touch screen, anyone know what I can do???
rom is:
http://forum.xda-developers.com/showthread.php?t=1798814

ADV STOCK KERNEL[ARC/S]4.1.B.0.578[Init.d/CWM/ROOT][18/08/2012]

SEGA ADVANCED STOCK KERNEL
RELEASED
This is an advanced stock kernel for the ARC S 4.1.0.B.587 It may work on the ARC but you have to test it out and let me know! I'm also uploading a superuser.zip that will enable ROOT!! just flash through CWM... if you find it helpful press thanks or DONATE
KERNEL
SEGA Advanced Stock
ROOT
SuperUser_ROOT.zip
THANKS TO
ChainsDD
TheGreatSega

Init.d is supported?
Sent from my LT18i using Tapatalk 2

NO
this is just an initial release... to get root ill add init.d support to the ramdisk later....
edit
Init.d support is there!!! hahah i just check the ramdisk !! lol!! sorry!!

finally

Any Changelog or Features.? Of this Kernel.
PlZ mention it in Thread
Sent from my LT18i using Tapatalk 2

It's a stock kernel with CWM... And init.d support

TheGreatSega said:
It's a stock kernel with CWM... And init.d support
Click to expand...
Click to collapse
5.5.0.4 Recovery (pvyParts) ???

leme try

Someone give some Feedback :good:

It would do the trick if overclocking would be possible.
Stock kernel + init.d + CWM + Overclock...................great combination!

not possible
saravak said:
it would do the trick if overclocking would be possible.
Stock kernel + init.d + cwm + overclock...................great combination!
Click to expand...
Click to collapse
since the sources are not released overclock is not possible

Did anyone test it on Arc yet?
@Sega, btw there's a lil mistake in topic title. 4.1.B.0.578?
Sent from nowhere

Just pushed into my LTi15. It seems to work ok, but I can't enter into CWM.
---EDIT
I was using Flashtool to do a hotboot instead a flash of the image... Sorry

hi, can you enable swap on this kernel? very thanks! good work!

I tested it on my "arc s" looks like the phone insists on running 1Ghz maximum not 1.4. I see in cpu spy logs. And seems swap is enableb. Thanks

does this support ext4?

Working fine
Hey,
I'm trying this on my lt15, unlocked bl, stock rom (latest). And it seems to be working just fine.
I'm letting a couple of battery cycles to be completed to report on battery performance.

Thanks
Working flawlessly on my Lt18i. I have noticed the 1GHz limit also when I started No CPU frills. But for me it's not an issue at all. By the way, I'm using Jader's Ice Bean ROM and it's totally compatible with your kernel. =)

gpkumaran said:
does this support ext4?
Click to expand...
Click to collapse
+1 ext4?
U20i/CM7&Kernel-14byNaA/XDA Premium

hi guys, i believe i flashed your kernel. I think!. I mean the downloaded file is the same name as yours. The kernel version says: 2.6.32.9-perf. I flashed this using flashtool. I flashed this kernel alongside jelly sandwich 6.1. I am currently not able to use the google play store as the data plan does not seem to be working. Play store is asking me to connect to wifi and not data plan. the button is definately switched on an connected to the vodafone network.
Any help is much appreciated.
Thanks Matt