Database Develop

Andro-ID V3.3-RC3

General discussion and reviews of users running on Andro-ID V3.3-RC3. I just tried it, but switched back to original MI 410 GB rom as the phone app on this rom sucks and GPU posts lower FPS. This also causes games such as GTA III to crash unexpectedly. TJ_Style must switch back to the original dialer and incase if he wishes to change, I suggest use a dailer/phone app which has a different all receiving screen. I really face a problem receiving calls with sweaty fingers. Guys please post your reviews here. Thanks.

Hi i tried to install the rc3 7z file via SUT 1.8.2 but it doesn't seem to recognise the 7z file that's available for download.. it keeps asking for an nb0 / xml file selection . do i need to change the extension or something before flashing ?
i just had a corrupted download the redownloaded 7z was extracting fine.

older backup did not work with this rom's recovery
guy's today i nearly braked by phone.
after trying this rom, when i try to flash backup made by napstar recovery then after installation when i try to reboot the phone, i m stucked at andro-id logo.
then i take battery out and boot into recovery again, then i try to update to napstar recovery. i flash the zip file and reboot the recovery. then i am also not able boot into recovery too.
then i flash stock 2.3 rom through SUT LR v1.8.2 and boot into download mode again replaced stock recovery.img with napstar's one in image folder. after that i booted into recovery and flashed my backup
thank's god my phone is safe now and running edowar great cm7.2

Hi Kallan_suz, you need to extract the .7z file using winrar. There is a file with an extension .nb0 in it. This is the file sut lr is asking for. If U need any more help post here. Its very easy yo flash though. Connect the fone and U are good to go.
Mithil

strange problem when i try to install this .nb0 it says some kind of error using sut

Dude use SUT LR 1.8.2, the other version 1.7 gives errors. Search on Google with this name and U shud find it.

Sharp Rom Vs Andro-ID V3.3-RC3
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.

[email protected] said:
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
Click to expand...
Click to collapse
hi
i have used both the roms and both seem to be more or less the same
its just that i feel that the battery is better on the sharp rom

Thanks for ur reply bro. so may be i should use this rom untill our great developers gift us with most awaited ICS ROM
Sent from my SH8188U using XDA App

Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(

orangez1988 said:
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
Click to expand...
Click to collapse
Ok, here's what U need to do. Flash back to the stock SPICE GB rom, because Sharp and RC3 use different kernel. Then flash back to CM 7.2.
Hope this helps.

Guide to Install Rom using Sut LR
Hello friends,
This video will let you know how to install ROM using
SUT LR 1.8.2 well check out thje video how to install
for those ho do not know or have any problem installing...
in this i install Andro-id RC3
Thankz TJ. your the man.
as said by you. all the RC3 download should be counted...
hope you wil come out with ICS soon.. we know your on the road map to ICS.
hope to see soon.
This video will show you how to install the Andro-id Rc3
inforall.webs.com/spicemi410.htm
please download the software from the below link...
you will need SUT LR software to install the RC3
mediafire.com/download.php?di3xii1yy3ii4c3

hi i noticed few thing in this fw the camera refused to work by giving cannot connect error then after somehow it worked the sound production in hp is not that great earlier was using csl gingerbread rom the sound production was awesome plz contribute is it me or is it the rom whose facing such problem

Having wifi connection problem with this rom
I have tested this rom for a few days.
Everything is ok, but the only problem I have is the wifi connection.
It can't connect to my office new TP-Link TL-WA801ND.
But it works with my old BelkinG.
Anyone can help me?? Thanks!!

Althought I'm running on CM7 now
But I was use this ROM for 6weeks
This ROM has good performance n very stable
But 2 things which annoying me,,so annoying
1.Headset Volume too loud,,maybe kernel build problem,,I use headset volume control to minimize problem
2.If RAM usage too heavy,,it cause auto reboot(not sudden reboot)so you must using AKM/AMM or for best experience,use V6Supercharger script
Thats I feel of this ROM
Hey guys,,is anyone have Bravia engine tweak for this device?
Edit : ah i forgot 1thing,,bad camera start if you have low RAM,,it caused black screen n FC,,try again if you experience that,also bad video result,resulting .3gp
Sent from my CSL-MI410 using Tapatalk 2

I just installed this ROM last night. I don't find any significant difference between this and sharp ROM, with some added features. Everything works ok including FM radio. I did not test the hdmi feature.
Guys can someone tell me what is the difference between a stock ROM like Sharp and this Andro-ID V3.3-RC3, I find this very similar to rooted sharp ROM with some differences like, lock screen and bloatware removed. I am sure there must be some advantages and better features that I might be not aware of. Guys please enlighten me about the better features that I can use. I am on this ROM right now.
Thanks in advance...
Sent from my FIH-FB0 on Andro-ID V3.3-RC3 using XDA

Hi,
I have just installed this ROM. Everything seems to be working fine except GPS. The GPS is not locking. I tried rebooting several times. Whenever I tried to turn GPS on, it's just blinking but not locking. I tried for more than 15 minutes. Any fix for this?
Sent from my FIH-FB0 using XDA

Install faster fix and choose a server for your country then try gps test app for locking
Sent from my MacLite-FB0 using XDA

bravida engine
does bravida engine work on this room

[Q] cyanogenmod 7 ??

Heyyoo
This is a simple question
Wats the difference between cyanogenmod 7.2 nd 7?? I mean featurewise
Nd also can smebdy provide installation steps
Would b very useful
Sent from my GT-S5570 using XDA

Im not good in this, but i think Cm7 have many developers... on galaxy mini squadzone, mebitek. And to flash rom you need Clockworkmod recovery. You can find it at forums. Flashing tutorials is in forums too. Good luck in flashing.
Sent from my GT-S5570 using xda premium

you should read buddy about cwm, stock from, custom rom, Odin, nandroid and many more

galaxyxtra said:
Heyyoo
This is a simple question
Wats the difference between cyanogenmod 7.2 nd 7?? I mean featurewise
Nd also can smebdy provide installation steps
Would b very useful
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
I assume you mean Cyanogen 7.0 but if you do i wonder why you'd even want to know given that 7.1 is the latest stable version.
If you don't understand that 7 and 7.2 are just version numbers, well now you know.
Search the forum for how to install it, there is no use repeating it in every thread.

Guys guys i knw wat is cwm nd cyanogenmod... Jus wantd tu knw which version is better... So of tu 7.1 ....
Sent from my GT-S5570 using XDA

galaxyxtra said:
Guys guys i knw wat is cwm nd cyanogenmod... Jus wantd tu knw which version is better... So of tu 7.1 ....
Sent from my GT-S5570 using XDA
Click to expand...
Click to collapse
Either start typing full words or get ignored, it's annoying to me but some people are trying to use translate it and they get nothing.
CWM is the recovery, CM7 whether version 7.0, 7.1 or 7.2 is the rom.
I wouldn't even try to flash ANYTHING before i got the difference if i were you.

if you know flashing here are links for you get cm7
cwm recovery v5 here
rz recovery here (more options than cwm but less used)
can download cm7.2 official builds here
can download cm7.2 by squadzone here (more option than official cm7.2)
video tutorial for flashing cm7 here:- here

dhlalit11 said:
if you know flashing here are links for you get cm7
cwm recovery v5 here
rz recovery here (more options than cwm but less used)
can download cm7.2 official builds here
can download cm7.2 by squadzone here (more option than official cm7.2)
video tutorial for flashing cm7 here:- here
Click to expand...
Click to collapse
You forgot the link to mebiteks, more stable than any other including and better performance and battery time than any other.
It's simply the best there is, and yeah, mebitek should be grateful for Psyches hard work.

why dont you post

[q] help required!!!

Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..

CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2

i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...

CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105

ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:

CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.

wic android version of gingerbread do you have on your phone..
sorry for asking again...

CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk

thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7

CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk

to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??

CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk

n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk

ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:

CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--

even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??

Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep

can you suggest any app for checking it??

Getting back to 2.3 from ICS

Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?

mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2

Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway

Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2

Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel

From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium

Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first

you cant build a house without foundation! flashing the kernel first is only proper way to do this!

1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done

zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!

It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA

[PRO][KERNEL] Riyal-based kernel with better touchscreen precision & SE logo

Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:

What is Stock ICS 538? or you mean 587

the recovery are same or did u update it too ?

I have to install the img with fastboot ... And I have everything right???

Thanks for this kernel. will give it try one of these days

New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77

[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules

lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same

josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM

Why now 4px? Was Gingerbread not 2px?

paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try

I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?

Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh

rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.

I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.

dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:

xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.

dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.

Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?

Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app