I am facing touch screen problem when ever I install CyanogenMod (not happening with Stock Rom) my touch screen has become over responsive.
As i press any key (or not) the phone detects key press. It is mostly happening in lower left (where * key is present)
Please some buddy solve the problem
sbajpai.bajpaisukrit said:
I am facing touch screen problem when ever I install CyanogenMod (not happening with Stock Rom) my touch screen has become over responsive.
As i press any key (or not) the phone detects key press. It is mostly happening in lower left (where * key is present)
Please some buddy solve the problem
Click to expand...
Click to collapse
cyanogenmod 7.2 or 7.1 ?
right now, i am using ics final (cm 7.2) and the touch is working fine
i faced similar issues before though. dont know if it helps, but go to /system/etc/init.d
and there maybe some scripts and tweaks. try to remove them and see.
amrith.28 said:
cyanogenmod 7.2 or 7.1 ?
right now, i am using ics final (cm 7.2) and the touch is working fine
i faced similar issues before though. dont know if it helps, but go to /system/etc/init.d
and there maybe some scripts and tweaks. try to remove them and see.
Click to expand...
Click to collapse
in both 7.1 & 7.2.
Please explain in detail as i am a newbie
i also have the same problem, esp. when i flashed a new kernel its has become more over responsive which gives me a headache
try flashing another custom rom?
sbajpai.bajpaisukrit said:
in both 7.1 & 7.2.
Please explain in detail as i am a newbie
Click to expand...
Click to collapse
i am not sure what the solution is, but u can try once.
use root explorer (or similar file manager)
go to /system/etc/init.d
now usually (if no tweaks and scripts are enabled) there will be some files.. like 00banner,01sysctl....20userinit
if there are any other files after 20userinit, delete them.
then reboot. see if its any better.
clarkleal said:
i also have the same problem, esp. when i flashed a new kernel its has become more over responsive which gives me a headache
Click to expand...
Click to collapse
so, how do you fix the sensitivity issue? i am also having the issue which is really annoying.
To all:
I'm 99% percent sure the problems you guys face are because of the OC kernel in the CM. Can you try flashing a non-OC kernel and determine whether the results differ?
In my case with non-OC kernel the problem still occurs. The only solution is underclock processor to 735MHz. Any ideas?
edit:
connect phone to the charger solve the problem too ;X WTF? even if i overclock to 850MHz, touchscreen works perfectly!
xfamo7z said:
restart your phone it should fix
Click to expand...
Click to collapse
Lolz. You must be kidding.
All : Even i am facing same issue after flashing Gingercrutz (only 2.3),ICS SUNDAY and Infinity rom. Still no solution for that.
Touchscreen Problem Fix
i had the same problem of multiple touches...b'coz of over sensitivity while using cm7.2 with oc kernel.
after flashing a non oc kernel either from ketut's or an0nym0us u can fix the prob.
thats how i fixed it.
Note:- Don't compare ur processor with other's(thinking other's can do oc without ny prob but not mine ..) b'coz every processor is different in some sense.
That's why some of them oc to even 960MHz and remain stable while some can't even take 820MHz(no wonder i belong to this category )
k so here u go :
ketut's thread :http://forum.xda-developers.com/showthread.php?t=1296905
cm-7.1-kernel-2.6.35.7-perf-CL562111.zip:download and flash this kernel using cwm (rem to mount system b4 flashing)
an0nym0us_ thread: http://forum.xda-developers.com/showthread.php?t=1292200
zImage-Mod.v1.0.zip : flash this using cwm (mount system b4 flashing)
Note:- v1.1 is also thr but v1.0 is more stable (can find out in thread)
Plz press thanks if I have helped
I no longer know what to do. Non-oc kernel help a liittle but not completely solve the problem. Still helps me only underclock MHz to 735.
adinq said:
I no longer know what to do. Non-oc kernel help a liittle but not completely solve the problem. Still helps me only underclock MHz to 735.
Click to expand...
Click to collapse
which rom and kernel are u using?
if u r on zImage Mod kernel then flash ketut's kernel and see.
dm08b002 said:
which rom and kernel are u using?
Click to expand...
Click to collapse
CM7.2 rc0 on KT7 , zImage , clock set to 735MHz and the touchscreen works OK, but I lose a few MHz
dm08b002 said:
if u r on zImage Mod kernel then flash ketut's kernel and see.
Click to expand...
Click to collapse
this doesn't help
dm08b002 said:
i had the same problem of multiple touches...b'coz of over sensitivity while using cm7.2 with oc kernel.
after flashing a non oc kernel either from ketut's or an0nym0us u can fix the prob.
thats how i fixed it.
Note:- Don't compare ur processor with other's(thinking other's can do oc without ny prob but not mine ..) b'coz every processor is different in some sense.
That's why some of them oc to even 960MHz and remain stable while some can't even take 820MHz(no wonder i belong to this category )
k so here u go :
ketut's thread :http://forum.xda-developers.com/showthread.php?t=1296905
cm-7.1-kernel-2.6.35.7-perf-CL562111.zip:download and flash this kernel using cwm (rem to mount system b4 flashing)
an0nym0us_ thread: http://forum.xda-developers.com/showthread.php?t=1292200
zImage-Mod.v1.0.zip : flash this using cwm (mount system b4 flashing)
Note:- v1.1 is also thr but v1.0 is more stable (can find out in thread)
Plz press thanks if I have helped
Click to expand...
Click to collapse
Thanks Machi.. It worked.
YA non oc kernel worked !!!solved!!!
adinq said:
I no longer know what to do. Non-oc kernel help a liittle but not completely solve the problem. Still helps me only underclock MHz to 735.
Click to expand...
Click to collapse
i have search many thread in SGA section and finally find this thread and your solution.. thanks bro it's worked !!
i'm facing same problem with custom rom with OC or nonOC kernel.. i have try firekernel but problem still there.. then i set my cpu to 729, reboot, and touchscreen feel better !
this is my galaxy ace and cym 7.2 stable
Related
This is my kernel based on 2.2.2 kernel released by LG! This kernel has LG touchscreen fix and I've added OC from HERE, ext4 and btrfs support (btrfs is experimental) and VPN support (tun.ko module).
If you would like to use this kernel: http://www.multiupload.com/H3HQT7WMSY
Do not forget to make nandroid backup first.
Packaged in koush's anykernel for compatibility with any rom.
PS: Thanks to Mik_os for his patience
PPS: With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
socialdistortion said:
Could you define optimised OC? How is it different from the OC supported by other kernels.
Thanks.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I used a new patch and this one, modify only 2 kernel files!
I can go up to 806MHz, which is really the top frequency my phone can handle. And amazingly enough, the cpu spike isn't there What changes did you make?
Work like a charm, but lack insteractive mode in setcpu and when you put it in power mode it stay at max freq. Thanks for your work buddy.
hope you include this on your next ROM release.... more power to you sir!
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
bluviper said:
hope you include this on your next ROM release.... more power to you sir!
Click to expand...
Click to collapse
#fenice mount this kernel!
Zerobarat1 said:
Dook - is it the same updated OC code that Mik used in his latest 2 builds ?
Click to expand...
Click to collapse
Oh yes!
Can not be used in the ROM 2.3.3 Mik_os?
segyto said:
Can not be used in the ROM 2.3.3 Mik_os?
Click to expand...
Click to collapse
Arrrrgh this does not contain any of the patches needed by Gingerbread to function at least remotely fine .
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
With my kernel I managed to use 806Mhz and it's works very well and it's stable for my phone.
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
peacekeeper05 said:
so this actually worked? would flash and and test it on some games. and would post my feedback after. Thnx!
Click to expand...
Click to collapse
Anyway, i prefer use my phone at 729MHz or 768MHz!
yep.
confirmed, cpu spike is not there.
thanks!
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
yelo3 said:
Can you define which is the LG touch fix? I thought that LG never released a fix for the touch bug...
Click to expand...
Click to collapse
in 2.2.2 v10R kernel LG released a fix for the touch bug!
sarfaraz1989 said:
Tried this kernel with LOLv1.2(froyo2.2) ROM,,Doesnt even stand up to SIppolo's super optimised kernel..After flashing this rom,phone got a little slower but like u said no more cpu spikes !!! THnx for posting
Click to expand...
Click to collapse
can anyone confirm this?
is it just for 2.2 or is 2.2.2 affected?
Can I flash this kernel into my AmberHome ROM (2.2)?
it has so small transitions in speed like from 600Mhz u cud scale upto 645Mhz..I like this
EDIT: yes u can check it out on any rom..It will work on any rom as it is packages like koush's style
Hi ,
I have a few begineers questions , I have a galaxy s that is running gingerbread 2.3.6 , is rooted and had a voodoo kernel (with recovery option) . I was thinking of possibilities of overclocking , can that be done with the setup I have ?
thanks in advance
You can easily overclock your phone with a root access with an application like this :
bit.ly/fnUFCD
There are lots of applications existing.
You can see on your kernel thread on this board what frequency is supported.
try Tegrak overclock or NSTools. Find other apps on Market.
Sent from my GT-I9000 using XDA App
thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers
saintetienne said:
thanks for the info guys , installed busybox and android overclock , but appears the kernel is not able to be overclocked as I got a message and the max frequency showing is 1000 mhz , would anyone be able to recommend a kernel that would suit - would like to keep things preety simple and straightforward at the mo
cheers
Click to expand...
Click to collapse
Semaphore is the best http://forum.xda-developers.com/showthread.php?t=1112908
thanks again , my phone is showing jvz suffix at end of kernel - show the semaphore jvz is the way to go ?
I am trying to avoid an expensive paperwight
Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App
sefira said:
Semaphore kernel can work on all gingerbread roms. So it is safe to flash semaphore 2.5 on your phone.
Sent from my GT-i9000 running ICS using XDA App
Click to expand...
Click to collapse
Absolutely right
thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers
saintetienne said:
thanks guys , will take a look tonight , think I used heimdall frontend previously , that ok or any better options ?
cheers
Click to expand...
Click to collapse
You can use CWM
install zip from sd ?
cheers
Plumped for odin in the end - all done , thanks to everyone for your help
Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?
Kops said:
Will overclocking the phone significantly reduce battery life? Or cause any degradation of the phone due to excess heat?
Click to expand...
Click to collapse
Battery use will obviously be higher with the processor on more clock speed but there's no problem with the temperature. Remember, always overclock in minor steps,check stability and in this way you would get a stable phone
hi there,
i have a problem, it always happens to me. at one moment my phone was perfectly fine, then it hang, then i did a force shut down via pressing the power button. when the phone is restarted, all my apps are gone, the phone appears to be in the default mode of the rom ie. it looks like after u flash a custom rom. can somebody explain to me ???? thanks
Samsung Galaxy Ace GT-5830
MIUI 2.4.2 ROM android 2.3.7 http://forum.xda-developers.com/showpost.php?p=30314192&postcount=3
Firekernel, Unofficial OC 825MHz
Happened to me twice on apocalypse, twice i was overclocking. It froze (while running several apps at one time and a 3d game the second), had to reboot by holding power, when it turn back on it was like i just did a factory reset, all apps except for system apps where gone.
It might be related to overclocking with firekernel on some devices, mine was 5830L with ktm baseband.
dxppxd said:
Happened to me twice on apocalypse, twice i was overclocking. It froze (while running several apps at one time and a 3d game the second), had to reboot by holding power, when it turn back on it was like i just did a factory reset, all apps except for system apps where gone.
It might be related to overclocking with firekernel on some devices, mine was 5830L with ktm baseband.
Click to expand...
Click to collapse
it happened to me on the apocalypse rom, using firekernel. could it be firekernel that is causing this ?????
DuckyDawn said:
it happened to me on the apocalypse rom, using firekernel. could it be firekernel that is causing this ?????
Click to expand...
Click to collapse
Its not a known bug of firekernel, but try not to OC. You can install another Kernel like blackhawk to check if it was the kernel makign the problems. In the future keep nandroid backups, coz they backup all ur apps too.
zeeshanhassan said:
Its not a known bug of firekernel, but try not to OC. You can install another Kernel like blackhawk to check if it was the kernel makign the problems. In the future keep nandroid backups, coz they backup all ur apps too.
Click to expand...
Click to collapse
I can confirm that with blackhawk kernel the problem was gone. It seems that on a few devices or basebands, when overclocking with firekernel causes this unintended factory reset. Gonna try and replicate it with logcat... although im not sure if that will work (cuz the phone freezes when the bug takes place)
zeeshanhassan said:
Its not a known bug of firekernel, but try not to OC. You can install another Kernel like blackhawk to check if it was the kernel makign the problems. In the future keep nandroid backups, coz they backup all ur apps too.
Click to expand...
Click to collapse
i always nandroid. wat do u mean by OC, as is overclocking or using the OC kernel unofficial CM version ???? will try it with blackhawk and also what about Nims Kernel ?????
DuckyDawn said:
i always nandroid. wat do u mean by OC, as is overclocking or using the OC kernel unofficial CM version ???? will try it with blackhawk and also what about Nims Kernel ?????
Click to expand...
Click to collapse
Means overclocking, i only got this bug when overclocking.
Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:
What is Stock ICS 538? or you mean 587
the recovery are same or did u update it too ?
I have to install the img with fastboot ... And I have everything right???
Thanks for this kernel. will give it try one of these days
New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules
lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same
josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM
Why now 4px? Was Gingerbread not 2px?
paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.
dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.
Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?
Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
ProSafe38 said:
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
tell me why i shouldnt report this thread
fotak-x said:
tell me why i shouldnt report this thread
Click to expand...
Click to collapse
Cause i need help and my Xperia X8 is stucking all the time , you cant handle or must wait 1min fpr one click-.-"
ProSafe38 said:
Cause i need help and my Xperia X8 is stucking all the time , you cant handle or must wait 1min fpr one click-.-"
Click to expand...
Click to collapse
there is GDX bug report thread and GDX dev thread you should post there Do you think i should report it because you are not only one with GDX v29 problems
overclock it or swap
fotak-x said:
there is GDX bug report thread and GDX dev thread you should post there Do you think i should report it because you are not only one with GDX v29 problems
Click to expand...
Click to collapse
and why so mean ? Cant you say normal ?
Iam a newbie is this forbidden ? -.-"
ProSafe38 said:
and why so mean ? Cant you say normal ?
Iam a newbie is this forbidden ? -.-"
Click to expand...
Click to collapse
nope its not forbidden just read rules and im sorry for being mean :angel:
ProSafe38 said:
Hi all
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
Yes, I have this bugs too. Additionaly, CWM is in 4 version - in GDXv28b was CWM 5 and it was better.
I have FC in all apps, so I can't use this ROM.
My X8 is in Stock Kernel - what about others?
Edit: In 2nd version GDXv29 for Stock Rom works so much better, but Settings app is old.
michal95 said:
Yes, I have this bugs too. Additionaly, CWM is in 4 version - in GDXv28b was CWM 5 and it was better.
I have FC in all apps, so I can't use this ROM.
My X8 is in Stock Kernel - what about others?
Click to expand...
Click to collapse
Hi , This is a known issue for stock kernel.
Even I am on stock kernel.
Try downloading and flashing the last beta build which eagleeyetom has uploaded,
Check the first page of GingerDx thread.
GingerDx beta build for stock works awesome on my X8
ProSafe38 said:
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
I dont have any of this problems
Sent from my X8 using xda premium
Wifi Problem
I have flashed Gingerdx v29 with nAa kernel and everytime i try to connect to wifi settings fc
Mayank77 said:
Try downloading and flashing the last beta build which eagleeyetom has uploaded,
(...)
GingerDx beta build for stock works awesome on my X8
Click to expand...
Click to collapse
Is it beta version? It works very good, stable and smooth now - v2 of GDXv029
yhui07 said:
I have flashed Gingerdx v29 with nAa kernel and everytime i try to connect to wifi settings fc
Click to expand...
Click to collapse
Did you wipe dalvik cache & cache?
I can't find the page of download for stock kernel, I tryed the one on the official page but it's full of bug... the rom can't recognize the ext2 partition of sd card to increase the internal storage! can anyone help me? any link?
Dede525 said:
I can't find the page of download for stock kernel, I tryed the one on the official page but it's full of bug... the rom can't recognize the ext2 partition of sd card to increase the internal storage! can anyone help me? any link?
Click to expand...
Click to collapse
just repair it with PCC and you will be on stock rom and kernel
fotak-x said:
just repair it with PCC and you will be on stock rom and kernel
Click to expand...
Click to collapse
no bro, maybe I have not explained well ... I downloaded the rom GDX v29 for the stock kernel, but is unable to recognize the ext2 partition of the SD card (which increase the internal memory), it is a bug heavy for me, because I many app installed, does anyone know how to solve this problem or know why I have it?
no wifi on alfs8a
hi all.. i have alfs v8a, and ginger dx v28b, working great with an average antutu score of about 1940 when overclocked to 748.
i downloaded and installed ginger dx v29 and it is great, nice look, nice feel and all.
i got good signal, feels smooth, bluetooth is good and overall its great.
however, i have the same issues with most who are using this rom.
i did not notice the auto brightness if it is working, have not confirmed it yet for myself coz i only got the rom about an hour.
and the biggest issue is that wifi is not working. i dont know what i did wrong but i think i did evrythng ryt, i already flashed the libsensorspatch and still, wifi says error when turning it on.
i will attach a screenshot from my about phone so you guys can check if i have the right kernel for this.
as i saw this post from the dev section:
Originally Posted by burnoutslo View Post
To everyone whose WiFi isn't working. The point is that you use normal Alfs kernel, not the Alfs GDX kernel, because the new version uses different driver!
This ones are ok:
X8_v08a-cm7_Alfs&djnilse.zip
X8_v9-cm7_Alfs&djnilse.zip
X8_09a-cm7_Alfs&Djnilse.rar
This ones are NOT ok:
X8_08-GDX_Alfs&Djnils.rar
X8_09a-GDX_Alfs&Djnilse.rar
i just wanna make sure if im using the right kernel or not because i really dont want to have the kernel changed if i have other options
ProSafe38 said:
Hi all
I installed GDX v029 now and it has many bugs..
Any one know a Soultion for:
-not reading Sim-Card
-Extremly Laggs (!)
-Home-App FC
Click to expand...
Click to collapse
I have installed GDX v29 on stock kernel and i have no bugs except that when i have activated oc module it works aparently but decreases performance a little (i.e. without oc module v004 at 600 mhz antutu benchmark scores are 1656, but with oc module v004 at 748 1550-1640), this is a bug?
Sorry for my bad English
Dede525 said:
no bro, maybe I have not explained well ... I downloaded the rom GDX v29 for the stock kernel, but is unable to recognize the ext2 partition of the SD card (which increase the internal memory), it is a bug heavy for me, because I many app installed, does anyone know how to solve this problem or know why I have it?
Click to expand...
Click to collapse
I have the same problem, and i think that the error is on /system/etc/init.d/10app2sd the script doesn't work on stock kernel.
Solution: I changed it to the 10app2sd GDX v28b version and now a2sd works correctly.
dsolis87 said:
I have the same problem, and i think that the error is on /system/etc/init.d/10app2sd the script doesn't work on stock kernel.
Solution: I changed it to the 10app2sd GDX v28b version and now a2sd works correctly.
Click to expand...
Click to collapse
thank U a lot man! i'll try it soon! you should post it on the page of GDX v29...
phone stuck at boot screen,dead sd card after flashing gingerdx v029