Related
Hi, i recently got my HTC KAISER,
unfortunately, the case that came with it to me is terrible, until now because of it, the phone fell from my hand 2 times until now. i have a feeling that the hinge is a bit loose from the screen. does anyone know how to tighten it back to the screen? from the right hand side there is about 2mm gap, and it makes a sound when i touch the screen since it hits the back.
any help, is appreciated.. esp if they are productive.
Thnx in advance
How can we help fix it if it was dropped? You didn't even provide any pics of it and I highly doubt we can help you. If its damaged its damaged, and your only course of action is to take it back and see if its under warranty and cross your fingers. I wish you the best of luck and hope someone can repair it for you. As far as the case I totally know how flimsy they are.
What does this have to do with XDA development?
Try the ATT wireless forums. This forum is for development.
what a couple of unhelpful posts, have we no mercy? this forum is full of topics that are 100% kaiser but 0% development, why are you picking on the poor guy with the (possibly) broken phone? and why direct him to some AT&T forum when he's already said it's an HTC branded phone? if you're going to kick a man when he's down, at least read his post properly first.
to the op: I feel your pain. in my first couple of weeks with the kaiser I must have dropped mine a dozen times, I think it's something to do with the extra weight. anyway, I too had some issues with the screen afterward - at one point their was a definite gap between the screen and keyboard as you described. I really noticed it and worried at first, but after a few days use and pocketwear, I found it pretty much closed up by itself. similiarly, i've found times where the top half of the phone has become misaligned to the left or right, so it overhangs slightly - this can be cured with a gentle but firm push the other way. I think the whole mechanism has been designed with a bit of give in it, so it can take odd knock without shattering, but still be nudged back into place without any real damage done. My advice - keep using it, slide and tilt it a few dozen times, and see if it falls back into shape. if it doesn't, try a firm but gentle push in the right direction, and if *that* doesn't work then take it back. but don't take any nonsense in the shop - insist on a warranty repair.
What are you talking about? I was blunt and straight to the point with the op. I told him we can't do anything and where he needs to go. I'm not gonna hold someones hand and tell them everything is gonna be fine and there's light at the end of the tunnel. He made a thread with NO pics to even show us what is going on so are we suppose to guess?
You don't have to be a customer of ATT forums to post there. The Kaiser design and the Tilt design are identical except for logos and the front cam.
The discussion would probably be better there instead of xda-developers
ronfin44 said:
What are you talking about? I was blunt and straight to the point with the op. I told him we can't do anything and where he needs to go. I'm not gonna hold someones hand and tell them everything is gonna be fine and there's light at the end of the tunnel. He made a thread with NO pics to even show us what is going on so are we suppose to guess?
Click to expand...
Click to collapse
there may be people on the forum that are famaliar with taking apart the Tilt and tightening the hinges. this is why he posted.
Thnx for the support
Thnx for all of the support until now....
i am begining to accept the fact that i can bear the hinge problem which might not be a problem since the aligning is ok slightly loose, but today in the morning, i noticed that after the fall, the "start" button of the keyboard is sticking out, is there anyway to stick.fix it back in like the rest of the keys (something similar to the laptop buttons, by pushing it in, in a way??)
thnx for all of the support.
There is a thread around here some where that has a ZIP or a link to a PDF file that shows you how to take the phone apart. The reson for the PDF was to show you how to make the screen tilt even more than what it does stock. Search for it, I dont have the link, but I have seen it and read it on these forums.
pls
any ideas concerning the keyboard problem?
The start is not in its place no more, it is somewhat hanging...
plssss help...
thnx
mikeeey said:
there may be people on the forum that are famaliar with taking apart the Tilt and tightening the hinges. this is why he posted.
Click to expand...
Click to collapse
As am I. Again. We're not mind readers. If you have a hardware problem you post pics and point-out exactly what's wrong so people can trouble shoot it. Take it to at&t like the first post suggested. I think a few of you need a cab that installs common sense before you post.
grizzley said:
There is a thread around here some where that has a ZIP or a link to a PDF file that shows you how to take the phone apart. The reson for the PDF was to show you how to make the screen tilt even more than what it does stock. Search for it, I dont have the link, but I have seen it and read it on these forums.
Click to expand...
Click to collapse
The dismantling guide that Grizzley refers to is available here (Tonychen's guide):www.mikechannon.net (in the manuals section)
To the posters that don't like the OPs post:
If the post had been made in the Upgrading Forum then I would join you in saying this is not a development or upgrading matter. However the post was made in the regular Kaiser section and is therefore a completely legitimate post. In fact, we have a tradition of trying to help those that want to dis-assemble their device for whatever reason. Even if they don't, but just need more info on the mechanics of the device then that is ok too. Thinking of the TyTn/Hermes, a fix was found for the loose keyboard problem via dismantling procedures and physical examination of the device. Problems can be physical as well as software related, so don't be too narrowly focused in this general Kaiser forum.
I do agree with those that say you must give full details and pics if at all possible with this kind of problem, otherwise we are left guessing and possibly wasting time suggesting things that maybe inappropriate.
Mike
Pictures are here
Here are the pics...
look at the "start" button, it is not completely removed, it is hanging on like this....
look at the gap from the right hand side (Power + camera button side) is bigger that the gap from the sim slot side, therefore generating a plastic tap sound when pressing on the screen from the right side. as you can see in the pics, the gap is bigger than the paper clip size.
any suggestions for reducing the gap, and fixing the "Start" button?
any suggestions?????
help would be appreciated!
Ok, after seeing what's wrong you def need to take it back to the store you bought it from. Ask them if they can sen it out for repair. They'l most likely give ya a temp phone til it comes back. Now, it's probably not gonna be covered for obvious reasons, however, it might be cheaper to have them repair it rather than buy another one. Worst case scenario you could replace it with a refurb. Refurbs are excellent and some you can't tell if they're refurbs to be honest. Cost is approx $149, plus shipping. Let us know what they say when you take it back.
Other than taking it to the store, any possible suggestion that i could take action on by my self to fix this issue quickly?
because they will ask me to leave it with them for a couple of weeks!
I know cnn.cn does sell replacement parts, if your willing to do the repair yourself. Sorry I cant help anymore
jon_k said:
What does this have to do with XDA development?
Try the ATT wireless forums. This forum is for development.
Click to expand...
Click to collapse
Hey jon_k, hat was bloody helpful mate!!!!!
I trust that you will be shown the same courtesy by the rest of us should you ever have a "non-development" question!!!
BTW, this forum is NOT just about development....ummm, can you read dude?
a$$wipe.
MACkjam said:
Hey jon_k, hat was bloody helpful mate!!!!!
I trust that you will be shown the same courtesy by the rest of us should you ever have a "non-development" question!!!
BTW, this forum is NOT just about development....ummm, can you read dude?
a$$wipe.
Click to expand...
Click to collapse
jon_k's post was over 20 days ago, and he's already been corrected by a mod. Before this gets out of hand, let me remind you to not feed the trolls!
With the help of the link above you will be prepared to open the Kaiser. OK, you have to have the tools mentioned and do take a deep breath before you start, but as soon as you start the process is simple. Print out the photo's and write on the paper the colour and type of the screws you removed.
The glued on case above the battery compartment is the meanest of them all to remove and thats where you start with. So when that is done in about 5 minutes you can discover the buttons from the inside and in 10 minutes you come to the hinges where you find a total of four philips screws to tighten.
Beware for one thing though. The black plate which holds the slider system is held by six torx screws. Check them too, but don't tighten them too much or you will end up with a broken screw. Guess how I know
Regards, Roel
Hi everyone,
I had seen a thread somewhere that someone mentioned that their battery was loose inside the phone and that the could hear it rattle around but I cannot seem to find that thread now.
I too have this issue. When I shake the phone for example I can hear the battery rattle around inside and when I take off the cover I can move the battery a bit from side to side. Can anyone tell me why this is?
I KNOW this is NOT a fake battery as I watched the store clerk open my box and build my phone from BRAND NEW and I have done the comparison on the batteries as well. It just seems that the hole for my battery is a bit too big orthe battery is a bit too small.
Can anyone tell me what I can or should do about this issue?
yes, i recall that topic as well
so you are not hallucinating
no idea where it went
if you do have this issue with the phone + battery, i'll suggest you take it back to bell for an exchange
they should be able to tell quite clearly this is not normal when they compare to the other phones they have
I stuck a business card, cut in half, between the battery and the cover. Seems to have filled the space in just enough to make a tight fit, my battery is no longer loose.
For now I have wedged a piece of paper between the battery and the hole and it has stopped the battery from moving as well but this should not have to be done I am sure.
@allgamer - I would take it back but I purchased it from Future Shop and the location I bought it has not received any new shipments in since and that was a month ago. The concensus from the Bell Stores here is the same as well stating that they are all on backorder.
I will keep my ears and eyes open on this and when they do have some new stock I will be bringing it to their attention for sure.
Yiann, even i have this problem with my bell i9000. I just found out and was looking if anyone else had this issue. I will take it in when i get a chance and will let you know. Did u get a chance to get it replaced or how did u fix this issue?
Thx
Raj
rajesh26e4u said:
Yiann, even i have this problem with my bell i9000. I just found out and was looking if anyone else had this issue. I will take it in when i get a chance and will let you know. Did u get a chance to get it replaced or how did u fix this issue?
Thx
Raj
Click to expand...
Click to collapse
Raj,
No I never did get it fixed. Please keep me posted rom what BELL does for you...
Thanks...
Sent from my GT-I9000M using XDA App
ya for sure...so you didnt take it to bell at all?
+1 i too have the same issue. piece of folded paper does the trick, but like all the above posts this shouldn't be necessary...
azzledazzle said:
+1 i too have the same issue. piece of folded paper does the trick, but like all the above posts this shouldn't be necessary...
Click to expand...
Click to collapse
I have this issue too.. the battery is way too loose. It must be a common manufacture error.
Same problem
i also have a loose battery in my gti9000.....even after wedging a piece of folded paper in between the battery and the surrounding loose area and making it fit quite tightly, the phone still makes a rattling noise when it vibrates....though when i hold the phone in my hand, it doesn't make that rattling sound...wondering if it cud be something other than the battery...
the other day my power button stopped working and, since it was past my warranty, i took the phone apart and sprayed some CRC QD electronics cleaner on it to fix the problem. in the process of taking it apart i forgot to take out my sim and sd card and the tray where they fit in came off with the back casing. i put the little ribbon thing on the bottom back in the hole it came out of but it must be messed up because now my phone doesnt recognize my sim or sd. i dont have much experience working with phones and i could find no help online for proper instalation of the sim tray. can someboy tell me how to fix this?
also the speaker and vibration stopped working after my lock button repair but i dont believe i touched any wires connected to that. is it just a coincidence? possible that the cleaner got in there? how can i fix it?
obviously the sim card is my priority right now but any help would be appreciated.
thanks!
I would suggest looking for either connexion2005 (aka mobiletechvideos) or AdamOutler. Both of them are very knowledgeable in the hardware of the Captivate, and I would guess that either of them could help you out with your situation.
I just so happen to have a couple of the SIM/SDCard circuit boards. I'll have to find them. I ordered a few of them while researching UnBrickable Mod. The circuit board is held on with double-sided tape on top of a metallic shield. It's very easy to replace. Anyway, PM sent.
AdamOutler said:
I just so happen to have a couple of the SIM/SDCard circuit boards. I'll have to find them. I ordered a few of them while researching UnBrickable Mod. The circuit board is held on with double-sided tape on top of a metallic shield. It's very easy to replace. Anyway, PM sent.
Click to expand...
Click to collapse
Do I really need a new part? I'm not certain but nothing seems to be broken and everything is intact. It feels more like something is just out of place and not making a connection. If it helps to understand what I'm trying to say I could post a pic for you to evaluate.
The part is cheap and easy to replace.
ok ill try get my paypal in order and get that to you as soon as i can. do you have an idea for why my speaker and vibration isnt working?
Actually I figured out the problem. I took everything out piece by piece and it was just a loose connector under the logic board. Sorry for bothering you with a stupid mistake but thanks for all your help and suggestions
Hi, I damaged my phone on the top so I am trying to replace the top speaker grill cover, I already have the replacement but I have no idea how to do it without messing my phone. I have investigated a lot and in the only teardown video I fount the top spekar grill seems to always be attached to the phone, and the ifixit guid has no information on this part of the phone. Please if anyone has done it or knows how to do this any kind of help would be useful as I can't stand to se my phone damaged no more.
Thanks
Sorry for posting twice this thread but the first time I posted it on Sprint's thread by mistake!!!
I think is better do this replace in warranty or from someone that is able to do this
nalbagli said:
Hi, I damaged my phone on the top so I am trying to replace the top speaker grill cover, I already have the replacement but I have no idea how to do it without messing my phone. I have investigated a lot and in the only teardown video I fount the top spekar grill seems to always be attached to the phone, and the ifixit guid has no information on this part of the phone. Please if anyone has done it or knows how to do this any kind of help would be useful as I can't stand to se my phone damaged no more.
Thanks
Sorry for posting twice this thread but the first time I posted it on Sprint's thread by mistake!!!
Click to expand...
Click to collapse
From what others have said the top grill is screwed in place from the inside so replacement will require a full teardown of the phone.
It's a job for a repair centre I guess which no doubt will cost large amounts of cash.
rider5512 said:
From what others have said the top grill is screwed in place from the inside so replacement will require a full teardown of the phone.
It's a job for a repair centre I guess which no doubt will cost large amounts of cash.
Click to expand...
Click to collapse
True that, seems technological advancements cost us more and more as they come about. Not only do we pay more for newer, better devices but the way they are made makes them cheaper to replace than repair ... I remember the day when you bought a TV for example and it would last you 20 years with no problems, now you're lucky to get a year or two out of new 1's. I think it's just a conspiracy to make us shell out more and more for stuff, but I'm very cynical lol
Is it really screwed in? I have the replacement part and it seems like there is no way to screw that thing, and on the etradesupply teardown video it seems like the cover just comes off without unscrewing any thing.
Did you try to heat it up. With a hairdryer? Maybe you can pull with your fingernail and see if it comes loose. Mine is chipped at the bottom. Parts are on its way.
*justintime* said:
Did you try to heat it up. With a hairdryer? Maybe you can pull with your fingernail and see if it comes loose. Mine is chipped at the bottom. Parts are on its way.
Click to expand...
Click to collapse
It does look like its screwed in http://www.etradesupply.com/catalog/product/gallery/id/14800/image/155282/
For reference only! This will absolutely VOID any warranty you may have on your device. If you believe you have a VALID reason to take apart a fully functioning phone, you DON'T! You are responsible for your actions and the reuslt of your actions, don't lay fault with anyone else.
The phone used to create the guide is my first D415. It took a long walk of a short box and shattered the screen. Let's leave it at that, please. And you thought I was going to take apart a fully functioning phone, didn't you?
You shall acquire and assemble in the same place, these items
The phone you wish to disassemble
A "precision" philips head screwdriver (don't know what a philips head is? Please go elsewhere)
A thin piece of plastic, an ID or bank card, guitar pick, even the edge of a plastic knife (file off the "teeth") You get the idea....
Optional items
Small blunt tip tweezers
Container to hold screws and such
Magnet to find the screws you drop (you will drop at least one)
Magnifying glass
Pictures say more with less words, so.....
I missed something when I tried to embed my pictures. For now, please look at the attached photos. Sorry about that.
*****EDIT****"*
there is an excellent video here
******UPDATE******
My apologies for not staying up on this. Life and my One+ One obsession got in the way. As
Refer to video link above for detailed instructions regarding hardware disassembly/reassembly process
I have ordered a WHITE replacement screen to test. Let's hope that it arrives with touchscreen issues.
I will update thread upon arrival of touchscreen.
****** EDIT again ********
Here is a photo album consisting of extra pictures that didn't make the guide. Some have fairly useful info as well as a few DON'T do this or you will break your phone even more pictures.
I've also added an update concerning reversed x axis starting at post #43
ID Numbers to compare
ID #'s are listed to the side. Again, sorry I couldn't embed them. I still searching for a solution....
jran0880 said:
If you believe you have a VALID reason to take apart a fully functioning phone, you DON'T!
Click to expand...
Click to collapse
Reasons, you say? Ha! Since when have I needed... reasons... to do anything?
But anyway, this is a very good guide! Thank you for taking the time to write it with the very detailed pictures! This should definitely be a sticky!
Sent from my LG-D415 using XDA Free mobile app
I have begun the process of disassembling the phone, and so far I was able to get 1 screw out (yay me). Guess what color the screw was? Green.
Very comprehensive guide, you really went out of your way! Kudos!
Please tell me how to get my pictures to display in my post. I thought I followed the instructions I found. However, the OP was from 2012. The link I created for each picture had HTML tags and from reading, xda does not use HTML for security reasons. So I deleted the HTML tags and tried the bb code, with no luck. Your guidance is greatly appreciated. Thanks!
jran0880 said:
Please tell me how to get my pictures to display in my post. I thought I followed the instructions I found. However, the OP was from 2012. The link I created for each picture had HTML tags and from reading, xda does not use HTML for security reasons. So I deleted the HTML tags and tried the bb code, with no luck. Your guidance is greatly appreciated. Thanks!
Click to expand...
Click to collapse
To show pictures, like in @Ilxaot's post above you, they need to be online somewhere. Use the Image tag
and the enter the image URL.
Now as I write this, I cheated with the image in my last paragraph. I copied it from the editor, right click -> Copy, and then pasted it in to the edit box... Weird. That may work too. LOL
jasonmerc said:
I have begun the process of disassembling the phone, and so far I was able to get 1 screw out (yay me). Guess what color the screw was? Green.[/QUOTE
Any luck with the other 10?
Any of the identifiers i posted help at all?
Click to expand...
Click to collapse
Using your guide, I successfully disassembled, replaced LCD and digitizer of my son's phone (like yours, sudden stop at high velocity) with Chinese purchased parts from eBay. BTW, didn't drop one screw lol. However since they weren't OEM parts, I've got the reversed touch I've read about and seen videos of (swipe right, screen moves left; touch right side of screen for a check box on the left side). Any idea of a fix? Let me tell you it was a pain signing into WiFi. Thanks for your guide and photos.
pre4speed said:
Using your guide, I successfully disassembled, replaced LCD and digitizer of my son's phone (like yours, sudden stop at high velocity) with Chinese purchased parts from eBay. BTW, didn't drop one screw lol. However since they weren't OEM parts, I've got the reversed touch I've read about and seen videos of (swipe right, screen moves left; touch right side of screen for a check box on the left side). Any idea of a fix? Let me tell you it was a pain signing into WiFi. Thanks for your guide and photos.
Click to expand...
Click to collapse
Maybe you can flip the digitizer 180°? I dont know if that would be possible (if the digitizer would even be able to fit in the phone the other way) but maybe it will work...
jran0880 said:
jasonmerc said:
I have begun the process of disassembling the phone, and so far I was able to get 1 screw out (yay me). Guess what color the screw was? Green.[/QUOTE
Any luck with the other 10?
Any of the identifiers i posted help at all?
Click to expand...
Click to collapse
I gave up. You see, the eyeglass screwdriver I have is EXTREMELY small and doesn't fit in the screws perfectly, but it's the best I've got. Coupled with the fact that green LockTite is on the screws (green LockTite is the strongest LockTite they make), it pains my fingers to have to keep on jamming down on the screw to get enough of a "hold" on the screw while I turn it. Maybe in the future I'll buy a bigger screwdriver so I can have a better grip on it, but for now I'm done.
It's probably for the better anyway... I probably would have dropped the digitizer in the toilet or something if I got it apart.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
jasonmerc said:
Maybe you can flip the digitizer 180°? I dont know if that would be possible (if the digitizer would even be able to fit in the phone the other way) but maybe it will work...
jran0880 said:
I gave up. You see, the eyeglass screwdriver I have is EXTREMELY small and doesn't fit in the screws perfectly, but it's the best I've got. Coupled with the fact that green LockTite is on the screws (green LockTite is the strongest LockTite they make), it pains my fingers to have to keep on jamming down on the screw to get enough of a "hold" on the screw while I turn it. Maybe in the future I'll buy a bigger screwdriver so I can have a better grip on it, but for now I'm done.
It's probably for the better anyway... I probably would have dropped the digitizer in the toilet or something if I got it apart.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, i dont recommend attempting cell phone disassembly while pearched on the "throne". Not judging! Just a personal decision on my part.
I wish i had the sense to know when to take that deep breath and calmly walk away. If i were in your shoes, the other 10 screws would be rounded out by now. There would be no accidental drop into the toilet, the phone would go down as the only l90 d415 to understand the meaning of swirly.... Wouldve made a great video though.
Click to expand...
Click to collapse
pre4speed said:
Using your guide, I successfully disassembled, replaced LCD and digitizer of my son's phone (like yours, sudden stop at high velocity) with Chinese purchased parts from eBay. BTW, didn't drop one screw lol. However since they weren't OEM parts, I've got the reversed touch I've read about and seen videos of (swipe right, screen moves left; touch right side of screen for a check box on the left side). Any idea of a fix? Let me tell you it was a pain signing into WiFi. Thanks for your guide and photos.
Click to expand...
Click to collapse
It looks like theres a flat connector between rhe 2 pieces. Perhaps it is connected "backwards"? I will look into it on my "donar" phone and see if i can figure something out. Will post findings within a day or 2.
*Edit - check @jasonmerc's reply as well. Good thought!
jasonmerc said:
Maybe you can flip the digitizer 180°? I dont know if that would be possible (if the digitizer would even be able to fit in the phone the other way) but maybe it will work...
Click to expand...
Click to collapse
No that wouldn't work since the digitizer came with the double sided tape but thanks. The buttons also don't work and touch doesn't work at all with the phone laying flat
jran0880 said:
jasonmerc said:
Yeah, i dont recommend attempting cell phone disassembly while pearched on the "throne". Not judging! Just a personal decision on my part.
I wish i had the sense to know when to take that deep breath and calmly walk away. If i were in your shoes, the other 10 screws would be rounded out by now. There would be no accidental drop into the toilet, the phone would go down as the only l90 d415 to understand the meaning of swirly.... Wouldve made a great video though.
Click to expand...
Click to collapse
Oh no, I'm not disassembling it there XD I'm doing it in my room. Just a bad joke on my part... With my luck, I'd have the digitizer laying half-off my desk, and I'd accidentally launch it in the air my hitting my hand on the part off the desk. It would then travel in the perfect arc to the bounce off the hallway wall, enter the restroom, and drop in the "throne" because the lid was left open.
I think some of the screws are actually a bit rounded off, but not to the point of not being able to work with them. That's part of the reason why I'm hesitant to proceed; I don't want to round them off completely because my screwdriver doesn't perfectly fit. I'd greatly appreciate if someone told me the exact screwdriver they used to disassemble this, and maybe where it was bought as well.
If all else fails and something breaks or the screws get rounded off completely, I'll grab a sledgehammer and finish it off. I'll even upload a video of it (and call it "How-To: Quick Disassembly of the L90")
pre4speed said:
No that wouldn't work since the digitizer came with the double sided tape but thanks. The buttons also don't work and touch doesn't work at all with the phone laying flat
Click to expand...
Click to collapse
Hmm... Then there's gotta be some sort of manual screen calibration app out there. I'll look for one and post back if I find anything.
Sent from my LG-D415 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:41 PM ----------
I found a thread talking about how to calibrate the touch screen of a chinese android tablet. I haven't read it yet, so I personally don't know if this will work or not for the L90, and if they do the instructions you will have to follow will probably be way different when it comes to actually calibrating. Quickly looking at the thread it looks like one will need ADB and a computer to do this.
HERE IS THE LINK TO THE THREAD
I'd say hold off on doing this until I or someone more technically experienced can confirm that this would work. If you do want to give it a go, please realize you are proceeding at your own risk.
EDIT: Having read the thread, those values for the screen are going to be different for the L90 since the screen resolutions are different. We are going to have to find the values for the L90 and then invert the X axis values and that should solve your touch screen inversion (we are basically creating a double-inversion. Who says two wrongs don't make a right?)
Click to expand...
Click to collapse
jasonmerc said:
jran0880 said:
Oh no, I'm not disassembling it there XD I'm doing it in my room. Just a bad joke on my part... With my luck, I'd have the digitizer laying half-off my desk, and I'd accidentally launch it in the air my hitting my hand on the part off the desk. It would then travel in the perfect arc to the bounce off the hallway wall, enter the restroom, and drop in the "throne" because the lid was left open.
I think some of the screws are actually a bit rounded off, but not to the point of not being able to work with them. That's part of the reason why I'm hesitant to proceed; I don't want to round them off completely because my screwdriver doesn't perfectly fit. I'd greatly appreciate if someone told me the exact screwdriver they used to disassemble this, and maybe where it was bought as well.
If all else fails and something breaks or the screws get rounded off completely, I'll grab a sledgehammer and finish it off. I'll even upload a video of it (and call it "How-To: Quick Disassembly of the L90")
Hmm... Then there's gotta be some sort of manual screen calibration app out there. I'll look for one and post back if I find anything.
Sent from my LG-D415 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:41 PM ----------
I found a thread talking about how to calibrate the touch screen of a chinese android tablet. I haven't read it yet, so I personally don't know if this will work or not for the L90, and if they do the instructions you will have to follow will probably be way different when it comes to actually calibrating. Quickly looking at the thread it looks like one will need ADB and a computer to do this.
HERE IS THE LINK TO THE THREAD
I'd say hold off on doing this until I or someone more technically experienced can confirm that this would work. If you do want to give it a go, please realize you are proceeding at your own risk.
EDIT: Having read the thread, those values for the screen are going to be different for the L90 since the screen resolutions are different. We are going to have to find the values for the L90 and then invert the X axis values and that should solve your touch screen inversion (we are basically creating a double-inversion. Who says two wrongs don't make a right?)
Click to expand...
Click to collapse
Figured out how to obtain th XY values for normal screen, if someone can figure out where modifications need to be made, Im thinking framework? The values for XY can be enabled in Developer Options - show touches and XY values. Turns out 10 taps to become a developer (its true cuz i read the toast) has other useful tools. I will decompile any suggestions related to touch screen calibration.
Brings back found memories of the famed L9 P769. It only took me 6 unintended 911 calls to reflash back to stock. Yep, 6! 5 with no sim. Took less than 2 seconds to pinpoint location on last few calls. 5 cars fully lit in my front yard and another 2 setting perimiter. Not once, but twice! Threat of jail made the choice to stop obvious.
"What are you in for?"
"I tried to unlock my bootloader." :cyclops:
Click to expand...
Click to collapse
jran0880 said:
jasonmerc said:
Figured out how to obtain th XY values for normal screen, if someone can figure out where modifications need to be made, Im thinking framework? The values for XY can be enabled in Developer Options - show touches and XY values. Turns out 10 taps to become a developer (its true cuz i read the toast) has other useful tools. I will decompile any suggestions related to touch screen calibration.
Brings back found memories of the famed L9 P769. It only took me 6 unintended 911 calls to reflash back to stock. Yep, 6! 5 with no sim. Took less than 2 seconds to pinpoint location on last few calls. 5 cars fully lit in my front yard and another 2 setting perimiter. Not once, but twice! Threat of jail made the choice to stop obvious.
"What are you in for?"
"I tried to unlock my bootloader." :cyclops:
Click to expand...
Click to collapse
I don't know, I think we just need to go to that file that is mentioned in the calibration thread, and whatever values are for the Y axis, just change them to a negative, since according to a video I saw of this issue with 3rd party digitizers in the L90 only the vertical axis is inverted (touch on the left side of the screen, and it registers on the right side). Of course, that is assuming that 0 on the vertical axis is in the middle of the screen. If not, then it will involve a little more math to get stuff right. Shouldn't be too difficult, though.
It's probably too late to suggest this now, but I believe GravityBox or some other Xposed module can remove the emergency call button from the lockscreen.
EDIT: Just checked the /data/data directory and I did not see any touchscreen calibration data folder. I did also read something about these Chinese android tablets coming with a TSCalibration2.apk (TouchScreenCalibration) program, so maybe you need to install that first before you can find the folder since that folder is probably the data for this app. I've had zero luck so far finding a download link for this file. Will report back if I find anything.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Truly appreciate all the work you are doing trying to help me out. I'm thinking its not going to be fixable. I would contact the seller and return the part, but return shipping to China would probably be more than the phone is even worth. I was even thinking to just put the original screen back on but the double sided tape is basically destroyed. It was only the LCD that was damaged in the sudden stop, the screen didn't crack at all.
pre4speed said:
truly appreciate all the work you are doing trying to help me out. I'm thinking its not going to be fixable. I would contact the seller and return the part, but return shipping to china would probably be more than the phone is even worth. I was even thinking to just put the original screen back on but the double sided tape is basically destroyed. It was only the lcd that was damaged in the sudden stop, the screen didn't crack at all.
Click to expand...
Click to collapse
I will be updating the OP to show FULL disassembly soon. I need to sort out the pictures and point out some things to watch out for as well as some DEFINATELY DON'T DO THIS items.
The parts that appear functional are availlable for donation, FREE of CHARGE (aside from the cost to ship via USPS flat rate box) to help another, less broken D415, continue life. The lcd assembly is yours if you'd like.
I will include a list of parts for donation in the OP.
Also, if you want to try tinkering around with the screen calibration, here is the TSCalibration2.apk (It is a system app from my VisualLand prestige 7L).
http://1drv.ms/1vrxBoX
Don't toss it to the curb just yet. And the double sided tape is WAY easier to fix than UV glue! Thank you LG for that. I'm seeing low priced OEM glass for the D415 starting to show up on eBay and amazon, as well.
And I still don't know what I'm dong wrong when I try inserting full pics instead of thumbs!
jasonmerc said:
jran0880 said:
Oh no, I'm not disassembling it there XD I'm doing it in my room. Just a bad joke on my part... With my luck, I'd have the digitizer laying half-off my desk, and I'd accidentally launch it in the air my hitting my hand on the part off the desk. It would then travel in the perfect arc to the bounce off the hallway wall, enter the restroom, and drop in the "throne" because the lid was left open.
I think some of the screws are actually a bit rounded off, but not to the point of not being able to work with them. That's part of the reason why I'm hesitant to proceed; I don't want to round them off completely because my screwdriver doesn't perfectly fit. I'd greatly appreciate if someone told me the exact screwdriver they used to disassemble this, and maybe where it was bought as well.
If all else fails and something breaks or the screws get rounded off completely, I'll grab a sledgehammer and finish it off. I'll even upload a video of it (and call it "How-To: Quick Disassembly of the L90")
Click to expand...
Click to collapse
*Slow Clapping*
Link to screwdriver I used:
http://www.homedepot.com/b/Tools-Ha...tt-hdx+4+in+1?Ntx=mode+matchpartialmax&NCNI-5
@whodisname likes the bit set in this post: http://forum.xda-developers.com/showpost.php?p=56592768&postcount=1037
Click to expand...
Click to collapse
jran0880 said:
I will be updating the OP to show FULL disassembly soon. I need to sort out the pictures and point out some things to watch out for as well as some DEFINATELY DON'T DO THIS items.
The parts that appear functional are availlable for donation, FREE of CHARGE (aside from the cost to ship via USPS flat rate box) to help another, less broken D415, continue life. The lcd assembly is yours if you'd like.
I will include a list of parts for donation in the OP.
View attachment 3024455
View attachment 3024456
Also, if you want to try tinkering around with the screen calibration, here is the TSCalibration2.apk (It is a system app from my VisualLand prestige 7L).
http://1drv.ms/1vrxBoX
Don't toss it to the curb just yet. And the double sided tape is WAY easier to fix than UV glue! Thank you LG for that. I'm seeing low priced OEM glass for the D415 starting to show up on eBay and amazon, as well.
And I still don't know what I'm dong wrong when I try inserting full pics instead of thumbs!
Click to expand...
Click to collapse
Thank you for the offer! That is very kind of you, however, the lcd seems to function fine. It's the touchscreen that is wonky. As for the pictures, I use tapatalk, so I only know how to insert via the app which is