Database Develop

[Q] Just bought a captivate, No Signal is displayed and baseband version is "unknown"

[Q] Just bought a captivate, No Signal is displayed and baseband version is "unknown"
Please, I need your help, I just bought a Captivate for my GF, we live in Honduras, Central America and the phone was supposedly sent unlocked, she inserted the sim card and the phone did not asked for any code, but, it has no signal, it is currently displaying "no Service", and when she goes to look at her baseband version, It displays "unknown"!
It has a crappy ICS rom, since Im an Nexus one owner I dont know a thing about this phone version!
Can you PLEASE! help me?
Can I just flash a CM nightlie over this ****ty ICS rom?
Do I have to upgrade or downgrade anything else?
Please, any help is welcome!

I assume you probably have, but are the APN settings correct?

You can probably flash a CM7 nightly over it. Worst case, it doesn't work and you have to flash back to stock first and try again.
It sounds like you don't have a working modem. If flashing CM7 doesn't fix it, flash a CM7-compatible modem and see if that fixes it.
Sent from my SGH-I897 using xda premium

apbthe3 said:
You can probably flash a CM7 nightly over it. Worst case, it doesn't work and you have to flash back to stock first and try again.
It sounds like you don't have a working modem. If flashing CM7 doesn't fix it, flash a CM7-compatible modem and see if that fixes it.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lolz good advice...just in the wrong order...
I would flash the modem first....cause it is the least invasive (doesn't wipe anything) and most likely will work.
Roms contain modems, so if fishing as ROM didn't fix it fishing a modem after that is just spinning your wheels.
BUT, since op doesn't even like the ROM...just flash to kk4 stock.
I would also make door that the phone is actually unlocked...but aosp doesn't have the same dialer codes to just dial and check, and i don't know those.

studacris said:
Lolz good advice...just in the wrong order...
I would flash the modem first....cause it is the least invasive (doesn't wipe anything) and most likely will work.
Roms contain modems, so if fishing as ROM didn't fix it fishing a modem after that is just spinning your wheels.
BUT, since op doesn't even like the ROM...just flash to kk4 stock.
I would also make door that the phone is actually unlocked...but aosp doesn't have the same dialer codes to just dial and check, and i don't know those.
Click to expand...
Click to collapse
I agree that it is less invasive, but he already said he wanted to go to CM7 so I figured he could skip a step if the flash actually worked. He bought the phone this way so who knows what the previous owner did to it. Both ways should fix his issue though (unless his phone is locked, as you pointed out).
If you flash to the most recent nightly or a kang, the Samsung dialer codes work to check your lock status.
Sent from my SGH-I897 using xda premium

So, thank you guys for helping me, heres what I did:
A friend told me that since I had ICS on it, I had to flash a compatible modem on it, I flashed I9000BVJJPD which is used on cm9.
When it turned on, It asked for an unlock pin, I tried to generate it with the SGSunlock app but didnt worked, so I downgrade it to cm7 (2.3.7) and tried again but with no success...
Tomorrow morning Ill take it to an unlock shop so it can be unlocked (hopefully).
Does the modem that I flashed is the correct one for a network that uses 850 bands?
I heard that some captatives erased the imei causing the "unknown baseband" issue, I dialed *#06# and it retrieved the imei code so, it isnt ****ed right?
any help is welcome, Ill let you guys know how it goes.
thanks!

donchele said:
Does the modem that I flashed is the correct one for a network that uses 850 bands?
Click to expand...
Click to collapse
Yes, JPD should support 850.

apbthe3 said:
Yes, JPD should support 850.
Click to expand...
Click to collapse
Up to you, which is the best modem out there?

No such thing..every phone acts differently, not to mention the signal at your location is a huge variable we can't factor in.

studacris said:
No such thing..every phone acts differently, not to mention the signal at your location is a huge variable we can't factor in.
Click to expand...
Click to collapse
I know, but, for example, developers say that the lastest is the best, but, you only can say if you test them...
But, have you test some of them? Which gave you the best result?

I always include jk4 in my roms as a good standard.

donchele said:
I know, but, for example, developers say that the lastest is the best, but, you only can say if you test them...
But, have you test some of them? Which gave you the best result?
Click to expand...
Click to collapse
I understand your dilemma. You look at a list of 50 modems and go, "Where do I even start?"
Personally, I have tried lots of different modems, old and new, and I always come back to KP1. I think it's worth adding to your list of modems to try out. I would also try JJJV5 and KG3.

donchele said:
So, thank you guys for helping me, heres what I did:
A friend told me that since I had ICS on it, I had to flash a compatible modem on it, I flashed I9000BVJJPD which is used on cm9.
When it turned on, It asked for an unlock pin, I tried to generate it with the SGSunlock app but didnt worked, so I downgrade it to cm7 (2.3.7) and tried again but with no success...
Tomorrow morning Ill take it to an unlock shop so it can be unlocked (hopefully).
Does the modem that I flashed is the correct one for a network that uses 850 bands?
I heard that some captatives erased the imei causing the "unknown baseband" issue, I dialed *#06# and it retrieved the imei code so, it isnt ****ed right?
any help is welcome, Ill let you guys know how it goes.
thanks!
Click to expand...
Click to collapse
If the imei is still present it's good. Did you check the imei displayed is the same on the sticker under the battery?
Did you try the SGS Unlocker website with the nv_data.bin ? http://www.communityhosting.net/sgsunlock/

studacris said:
I always include jk4 in my roms as a good standard.
Click to expand...
Click to collapse
apbthe3 said:
and I always come back to KP1. I think it's worth adding to your list of modems to try out. I would also try JJJV5 and KG3.
Click to expand...
Click to collapse
Thanks, you guys rock, Ill the 3 that you mentioned here and let you know which one is my best...
Ill Compare Battery life, Reception and data...

Lost my network when I set the radio band to US

It was showing me H+ on the top instad of 4g
I did .#*#4636#*#* and changed the band from phone info to USA.
Now I have lost my phone network and its not coming up.
How can I fix it... so that my phone becomes useful :'/

Change it back to the way it was. Your not supposed to change anything besides the part to lte.
Sent from my JokerMATRIX HD MAXX

deeje00 said:
Change it back to the way it was. Your not supposed to change anything besides the part to lte.
Sent from my JokerMATRIX HD MAXX
Click to expand...
Click to collapse
The network is not coming on stock rom too
donno whats goin on.
I m completely lost on what can bring the network back

And this is why we don't mess with things when we don't know what we're doing.
Sent from my JokerMATRIX HD MAXX

swapnil0545 said:
It was showing me H+ on the top instad of 4g
I did .#*#4636#*#* and changed the band from phone info to USA.
Now I have lost my phone network and its not coming up.
How can I fix it... so that my phone becomes useful :'/
Click to expand...
Click to collapse
you have to reflash the modem, no other choice

z0bug22 said:
you have to reflash the modem, no other choice
Click to expand...
Click to collapse
How to flash the modem?
I think d problem is with sim..
Even if I insert it in other cell fone I get no network

swapnil0545 said:
How to flash the modem?
I think d problem is with sim..
Even if I insert it in other cell fone I get no network
Click to expand...
Click to collapse
The problem is not with the sim
Just tested the sim on S3 and its working fine there.
@tcf38012 told me to download fastboot files and restore

you can flash stock rom use RSD lite.

cutdaubac said:
you can flash stock rom use RSD lite.
Click to expand...
Click to collapse
Thank you guyz.
Flashing the stock via RSDLite fixed the problem.
I wonder we should have something like get ril for fixing our radioband problems
thank you anyways

Please help! No network signal anymore
Hello guys!
I am facing the exact problem. I also accidentally selected USA Band in Phone info menu and now not getting network bars anymore. I tried factory resetting but no luck. I am using this Motorola Atrix HD phone in India (SIM unlocked) and its rooted but Bootloader is locked. Its running on Stock JB 4.1.1
As suggested by some folks here to flash Modem or flash Stock ROM via RSD lite, I couldn't find the Stock 4.1.1 or Modem to download. Please help me fix the phone.
Thanks in advance!

I have same problem. Didn't see this topic before making new one.
Files are here:
http://sbf.droid-developers.org/dinara/list.php

mm166 said:
I have same problem. Didn't see this topic before making new one.
Files are here:
http://sbf.droid-developers.org/dinara/list.php
Click to expand...
Click to collapse
Sad to know that you are also facing the same problem like me.
Did you try flashing MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml.zip via RSD Lite? Hopefully it should fix the issue. I tried to download this Stock AT&T ROM but every time I have broken file error.

sony108 said:
Sad to know that you are also facing the same problem like me.
Did you try flashing MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA.xml.zip via RSD Lite? Hopefully it should fix the issue. I tried to download this Stock AT&T ROM but every time I have broken file error.
Click to expand...
Click to collapse
I haven't tried it yet but I plan to try it tonight. I will let you know my results. Fastboot flash modem file didn't help.

mm166 said:
I haven't tried it yet but I plan to try it tonight. I will let you know my results. Fastboot flash modem file didn't help.
Click to expand...
Click to collapse
Good luck buddy! I hope it fixes the annoying issue. I will wait for the result ...

*Removed*
I had to reboot PC. Now it's flashing.
Edit:
It DID work!!! yey!
Good luck guys!
Maybe this can help someone:
http://forum.xda-developers.com/showthread.php?t=2231249

Glade to know that it worked for you ...
By the way which version of AT&T Stock ROM you flashed and was your phone Rooted with the Locked Bootloader?
My AHD is Rooted, Locked Bootloader and on Stock 4.1.1 so am I good to go? Do I need to Un-root it prior to flash through RSD Lite?
Thanks!
Sent from my MB886 using Tapatalk 2
EDIT: I have fixed my rooted but locked AHD. Simply flashed Stock AT&T 4.1.1 using RSD Lite and phone got network signals again :victory:

[HELP] Need LG Optimus 4X new baseband(v20c october 2014)

hello all. my phone shows "reorganizing internal processes" whenever i try to make a call. bcoz of this it is unusable as a phone.
also imei is null, baseband is unknown and cellular is in NO SERVICE.
nothing works: tried reboot,
other roms (cm 11, zaiben, mahdi etc..),GetRIL app...
also i tried to flash latest v20c but it always stuck at 10%..
but i can flash anything from cwm(philz touch)
so can anyone please help me with the so said baseband in cwm flashable format or a cwm backup of latest v20c update?
i'll be grateful to anyone who looks into this issue.
thanks in advance.:good::good:

Hi,
I will have your thread moved to your device section.
Good luck!

You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.

i"ll try upload you stock partitions to flash ***when i find some free time***

Marko055 said:
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
Click to expand...
Click to collapse
yes i tried flashing latest v20c and v20b.. but always stuck at 10%.. tried 3 different pcs and cables and latest method of kdz flashing too.. still no luck:crying:

Any updates on this?? anyone?

I just check on lg page, latest firmware for your country is v20A, so try to flash that.

Marko055 said:
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Click to expand...
Click to collapse
dude, i cant "FLASH". thats the problem

What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.

Yeah, the 4X is nearly unbrickable. Even when nothing works, LG Mobile support tool can get it back with a stock rom.
I am in Portugal and have the same problem. I read in a different thread that the problem of "reorganizing internal processes" is in fact a crash of the phone/radio process, due to hardware bug that stucks when both voice and data communications are requested at the same time in a 3G network. I'm not sure if even V20C can correct the problem. One solution is to switch to 2G in general, (EDGE data speeds... )and you won't have problems, When needing for a particular download, switch temporarly to 3G.
But if anyone have a 3G stable solution, please share as I am also highly interested!
I tried stock JB. In custom CM roms, for instance 4.4.4 (is what I have now), you won't have a "reorganizing..." message, but you will loose completely mobile communications when the problem occurs, and only a phone reboot will recover it

SHA_NDY said:
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Click to expand...
Click to collapse
tried that already. it stops at 10%. says retry. no go.

ismayeel25 said:
tried that already. it stops at 10%. says retry. no go.
Click to expand...
Click to collapse
I did have sam problem wiht 10% thingy but I use the LGFlashtool2014 from the forum:
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
(credit to proper uploader, I dont remember where did I get it, sorry)
The problem causes by LG update software when you kdz from 20A to B or C.
about the IMEI the V20C not really solve my problem but it' sustainable.
Bests of luck.

Thanks. i'll try it.

any chance

[Q] No call sound after back to stock

Hi guys,
I know there are many similiar threads to this one and I'm sure I've read most of them. Either my issue is different, or, if the answer was in one of them, I was too stupid to realize it.
With my S4 Active GT-I9295 I had to go back to stock ROM for the Samsung S-Health and Gear related apps.
I came from spegelius' (absolutely awesome) Google Edition for SGS4A (int'l) v0.9.9.-od2 and flashed the Samsung Stock 4.4.2 with Odin (*). The procedure was: Flash -> Factory Reset -> Flash again to be absolutely sure all files are updated. Currently, I rooted the phone.
My problem persists:
After a reboot I (usually; not always) am able to make normal phone calls.
After some time (sometimes minutes, sometimes hours) I no longer have sound.
I do not hear ringing, the callee can't hear me, I can't hear the callee.
Same problem if I'm being called
Establishing a connection though works always.
Mobile Data is not affected.
WiFi works
Also observed after factory reset -> re-flash, only enter WiFi PW and Google Login Data -> try phone call
I know this problem often arises from a baseband/modem mismatch. So I investigated my CWM backup of the pre-installed 4.2.2 ROM.
That's what was pre-installed:
Bootloader: I9295XXUBMK3
CSC: I9295OXXBMK3
Modem: *I did not find the info in my backup*
This corresponds to the Romanian 4.2.2: http://www.sammobile.com/firmwares/download/22586/I9295XXUBMK3_I9295OXXBMK3_ROM.zip/
That's why I flashed the direct successor http://www.sammobile.com/firmwares/download/37083/I9295XXUCNI1_I9295OXXCNI1_ROM.zip/
PDA: I9295XXUCNI1
CSC: I9295OXXCNI1
MODEM: I9295XXUCNI1
I tried everything I could find online, nothing helped. I am really running out of ideas. Is it possible to go back to 4.2.2 to see if the problem persists?
I do have logcat logs of the radio module before and after the problem occured. But its thousands of lines. If it helps I can upload it!
Thank you guys for your help
(*): I did some intermediate flashing of several other firmware versions (especially different baseband / CSC versions of the same 4.4.2). But I assume this does not affect the result. I used Odin v3.07 & v3.09
Edit: PS: I still think that I might have the wrong CSC Version. I know the 4.2.2 PDA/CSC matches, but I am not from Romania. I'm actually from Germany. And what makes me wonder is that I cannot select the German Keyboard Style without downloading it first. I can't remember doing something similar after unboxing the phone and setting it up for the first time.

Are you aware of this thread?
http://forum.xda-developers.com/showthread.php?p=56955843
Bevare the Thanks Button

Thanks for the answer O-T!
Yes, I was aware of that thread. However, I never made it until here
http://forum.xda-developers.com/showthread.php?p=50787570
Although I did the things basically as described in that posts I have a new question:
Which country is relevant for the search on sammobile? I mean, do they ask me "Where do you live" or "For which country was your device produced?".
Edit: Okay actually they ask me for the 'product code', so it's probably the latter question.
I realized that my 4.2.2 PDA and CSC also match the French version. That would match the language of my original packaging. I already flashed the French 4.4.2 once but heard only noise when calling someone. So I gave up on that one quickly. But I'll give it another shot now.
Is it possible that I had a factory installation of the firmware for country A, and when I first registered with my local carrier I received a modem update OTA for country B?
That would really surprise me. But it could explain my issues, since there is no 4.4.2 for o2 Germany, i.e. I probably wouldn't receive another modem update OTA.
(I never looked into the carrier specific firmwares because I figured they are for sim-locked devices.)
If the above is true, I understand that the only option would be to somehow downgrade my device back to 4.2.2.
I know I'm asking a lot of questions that have been asked and answered elsewhere. But by now I tried so much and nothing worked that I'm really confused and need your guidance.

I know I type too much, so a short summary.
Everything I tried so far didn't help, the stock ROM from sammobile.com doesn't help, currently I'm on 4.4.2 XEF (France)
I'm 80% sure I have the firmware for the correct country
From factory-side I definitely had an XX PDA and OXX CSC, so shouldn't all XX/OXX versions work, even if not the exact country?
What should I try next?
Is there a way to uniquely identify the country code from a backup of the /system or /data parition?

hyperion89 said:
I know I type too much, so a short summary.
Everything I tried so far didn't help, the stock ROM from sammobile.com doesn't help, currently I'm on 4.4.2 XEF (France)
I'm 80% sure I have the firmware for the correct country
From factory-side I definitely had an XX PDA and OXX CSC, so shouldn't all XX/OXX versions work, even if not the exact country?
What should I try next?
Is there a way to uniquely identify the country code from a backup of the /system or /data parition?
Click to expand...
Click to collapse
I am not sure if you have done this, but one thing I always recommend is a phone factory reset from settings (not CWM/TWRP) when you are on stock firmware as this is known to correct a lot of issues caused mainly due to faulty partition / corruption. However beware of the fact that this will wipe your internal SD card therefore back it up before you do that.
If you have flashed the correct firmware for your country & carrier (if it has a separate one) where you are using the phone, and done the above then I do no see any other issue than a faulty IC that requires replacement

JASONRR said:
I am not sure if you have done this, but one thing I always recommend is a phone factory reset from settings (not CWM/TWRP) when you are on stock firmware as this is known to correct a lot of issues caused mainly due to faulty partition / corruption. However beware of the fact that this will wipe your internal SD card therefore back it up before you do that.
Click to expand...
Click to collapse
Yes, I always did a factory reset. Most of the times I even flashed the firmware a second time after the factory reset. (This was recommended somewhere else.)
JASONRR said:
If you have flashed the correct firmware for your country & carrier (if it has a separate one) where you are using the phone, and done the above then I do no see any other issue than a faulty IC that requires replacement
Click to expand...
Click to collapse
Now that really helps me! Thanks. BUT: There is a seperate firmware for my carrier. However, I did not purchase the phone from that carrier. That's why I never tested the carrier specific firmware. Moreover, there is only the old 4.2.2 available, so I can't test it, since I cannot downgrade.

hyperion89 said:
Now that really helps me! Thanks. BUT: There is a seperate firmware for my carrier. However, I did not purchase the phone from that carrier. That's why I never tested the carrier specific firmware. Moreover, there is only the old 4.2.2 available, so I can't test it, since I cannot downgrade.
Click to expand...
Click to collapse
You can flash only the modem & non-holos from the 4.2.2 firmware and check

JASONRR said:
You can flash only the modem & non-holos from the 4.2.2 firmware and check
Click to expand...
Click to collapse
Tried it and it didn't work; completely crashed my Phone Application. It rang on the other side, but no conversation was possible. Is this because of the bootloader / modem mismatch?
Does anyone have instructions to safely downgrade to 4.2.2 again? Should I open another thread for this discussion?

hyperion89 said:
Tried it and it didn't work; completely crashed my Phone Application. It rang on the other side, but no conversation was possible. Is this because of the bootloader / modem mismatch?
Does anyone have instructions to safely downgrade to 4.2.2 again? Should I open another thread for this discussion?
Click to expand...
Click to collapse
Identify the bootloader version and Knox state:
http://forum.xda-developers.com/showthread.php?p=57332718
Knox is not a counter - it's a like a fuse.

Hi O-T,
the bootloader is I9295XXUBMK3 and it does not yet have the warranty bit which I assume you mean by KNOX state.
Are there maybe any new ideas?

hyperion89 said:
Hi O-T,
the bootloader is I9295XXUBMK3 and it does not yet have the warranty bit which I assume you mean by KNOX state.
Are there maybe any new ideas?
Click to expand...
Click to collapse
There's 3 stock 4.2.2 TW ROM I9295XXUBMK3 to choose for flash by Odin. All have different Germany CSC (Carrier Specific Code) - Generic, O2, T-Mobile. PDA=MODEM=I9295XXUBMK3 for all of them. Not sure if O2 or T-Mobile versions are locked, but they usually have operators bloat apps.
Remember to power OFF before entering download mode, flash ROM in Odin, factory reset.
https://www.samdownloads.de/download/i9295xxubmk3-dbt-4-2-2-germany/
https://www.samdownloads.de/download/i9295xxubmk3-via-4-2-2-germany-o2/
https://www.samdownloads.de/download/i9295xxubmk3-dtm-4-2-2-germany-t-mobile/
Your choice.

O-T I'm so sorry. My post from yesterday was a lie; I can't read my own OP. :crying: :angel:
I9295XXUBMK3 was preinstalled
Now I'm on I9295XXUCNH2, which implies 4.4.2 and makes a downgrade to 4.2.2 impossible (afaik).
Please note that I already tried the generic German (4.4.2) firmware. I never had operater bloat apps and I bought a simlock-free version of the device. Thus I never tested the o2 / T-Mobile ones. (I did, however, once flash the o2 modem over the generic 4.4.2, which turned out to be a bad idea).
I would love to extract the modem info from my CWM backup. The bootloader / CSC strongly suggest I have a French phone, but the modem would ultimately clarify that.
What is your opinion on trying a different custom-ROM? I never built one so I have no idea from where designers obtain their NON-HLOS and modem files. I know many don't come with any of those and require an already working ROM before flashing so these drivers can be kept. On the other hand, Darkman's StockyROM has an additional modem pack.... which, in my case, didn't help.
I simply cannot believe that it's a hardware issue. Everything worked fine until the update to 4.4.2 and new radio drivers should be thoroughly tested before distribution.

Please .. Need Help To Recovery EFS files for Note 5 (N920C)

Hi All ..
I have a problem with my Note 5 (N920C). I flashed my phone with official rom without taking a backing up for /efs files. Now I have IMEI number installed on my phone but the GSM Network is gone. Is there any way to restore the /efs files that can help me to using my phone ??

anu idea ??

medo_nedo1983 said:
anu idea ??
Click to expand...
Click to collapse
Flashing an official ROM should not mess with your EFS. What do you mean you lost your GSM network? Have you checked your APN?

CodeNameRedNeck said:
Flashing an official ROM should not mess with your EFS. What do you mean you lost your GSM network? Have you checked your APN?
Click to expand...
Click to collapse
The ROM I was using was flashing with cloned IMEI after flashing my N920C with fresh version of official ROM the GSM network is gone and when I install my Sim Card it is shows only "emergency call". I checked while the IMEI is gone or not and saw it is still there. I need a solution for activate GSM network and see GSM signal. Some of my friends said that my ./efs file is corrupted so I need patched ROM that can fix my ./efs file automatically after flashing. Is there any why to recover it ?

medo_nedo1983 said:
The ROM I was using was flashing with cloned IMEI after flashing my N920C with fresh version of official ROM the GSM network is gone and when I install my Sim Card it is shows only "emergency call". I checked while the IMEI is gone or not and saw it is still there. I need a solution for activate GSM network and see GSM signal. Some of my friends said that my ./efs file is corrupted so I need patched ROM that can fix my ./efs file automatically after flashing. Is there any why to recover it ?
Click to expand...
Click to collapse
I understand your situation now. As far as I know there is not a way to recover your EFS. I could be wrong. I have heard of others getting their EFS back after flashing official firmware. You may be out of pocket on a repair. Good luck to you.

CodeNameRedNeck said:
I understand your situation now. As far as I know there is not a way to recover your EFS. I could be wrong. I have heard of others getting their EFS back after flashing official firmware. You may be out of pocket on a repair. Good luck to you.
Click to expand...
Click to collapse
Thanks a lot. So from your point of view, do you expecting that there will a solution for this issue in near future when with hacked version of official ROM or my phone is no way its gone !

medo_nedo1983 said:
Thanks a lot. So from your point of view, do you expecting that there will a solution for this issue in near future when with hacked version of official ROM or my phone is no way its gone !
Click to expand...
Click to collapse
I am sure Samsung can fix it. You will have to pay though. You could also try searching for efs recovery because you might get lucky. I do not know a whole lot about it but from what I have seen, if flashing official firmware does not fix it you are out of luck. I am not sure about future releases of ROMs that may fix it.

CodeNameRedNeck said:
I am sure Samsung can fix it. You will have to pay though. You could also try searching for efs recovery because you might get lucky. I do not know a whole lot about it but from what I have seen, if flashing official firmware does not fix it you are out of luck. I am not sure about future releases of ROMs that may fix it.
Click to expand...
Click to collapse
Thanks for your replay. I fixed my phone and its working now. I did these steps:
1- Untar the official ROM.
2- Delete Modem file from the rom.
3- Re-tar the ROM.
4- Flashing using Odin.
5- Fixing EFS by repairing it using z3x box.
Thanks again :fingers-crossed:

medo_nedo1983 said:
Thanks for your replay. I fixed my phone and its working now. I did these steps:
1- Untar the official ROM.
2- Delete Modem file from the rom.
3- Re-tar the ROM.
4- Flashing using Odin.
5- Fixing EFS by repairing it using z3x box.
Thanks again :fingers-crossed:
Click to expand...
Click to collapse
Glad you got it.