Database Develop

USB device not recognized:Cant connect to laptop..??

laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia

a in yul said:
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
Click to expand...
Click to collapse
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao

thx...
@[email protected] said:
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
Click to expand...
Click to collapse
hello there, first n foremost thanks for your input!
Before trying out your possible solution i tried to connect and for some reason i was able to connect via the device today...??!!
i really dont know why, but will try your soln if this situation reocurrs.
NB: this happenned to me twice in the last 3-4 months, n i never figured out the cause ??
any other advice or ideas gratefully accepted.;

its probably the same as me and loads of other people - the pins have bent on your usb connector - probably caused by using non standard chargers and usb leads. Its been widely reported. The non-standard leads have too much space around them when plugged in and wiggle causing the connector on the tytn II to bend. Try using the lead which came in the box and see if it helps. and try using the charger that came with it too.

Can bent pins be fixed?
Hello -- I'm one of those people with a non-recognition problem. Is it possible to fix the bent pins? My problem seems to have begun around the time I lost my original USB cable. Now, all the cables I have -- ones that have been specifically sold to work with my HTC Tilt -- have the symmetrical, sort-of-trapezoidal mini-usb connection, rather than the rectangle-with-one-corner-cut-off shape of the original cable. I should say these cables do charge my device, but none of my computers recognizes it as a USB device.
Help?
Thank you,
J. Georgia

bent pins continued
I should add that the charging cable that originally came with my phone has the same connector shape, so I'm not sure what's going on.

USB Device not recognised
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.

axeman said:
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
Click to expand...
Click to collapse
Unfortunately this is no soution for me. I seem to have this problem as well, since about two weeks.
I use two notebooks (Dell & Acer) and both do not show any activity when connecting my Kaiser to the original USB cable. The device is not even switched on when I connect it, nor does this happen when I connect it to the (original) cable in my car, which did work before.
Charging works fine, both in the car and when connected to both notebooks, but no Sync at all.
I have tried another USB-cable with the same result, so I suspect some hardware-problem causing me to be unable to copy files between my notebook and my phone and worse, rendering me unable to flash a new ROM onto it.
Who knows what to do next?

I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia

I have had similar problems with my touch pro in the past, even bluetooth internet sharing eventually gave up the ghost.
I tried a myriad of leads and then eventually reinstalled active sync- which did the trick.

USB sync not working
[email protected] said:
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
Click to expand...
Click to collapse
I've had the same problem with my first Tilt. There's multiple threads that detail this known problem. Some seem to be due to bent pins, some are general hardware failures (possibly the USB controller). There are some HardSPL images out there that have a "force usb" option enabled. This never worked for me, but it might be worth a shot for you.
...a word of warning....
If you end up reflashing your phone (via MicroSD) and the flash goes bad, you may be stuck, as many of the solutions for repairing a bad flash require you to USB sync. My first Tilt was a victim of this after a bad stock ROM flash that left my device without audio, and unable to flash via MicroSD.

replace usb board
you need to replace your usb board. It will run you less than $10 if you do it yourself. you can get the board on ebay

really? 4 years later?

[Q] Can't connect my Captivate through USB anymore

Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!

Hmm. You have Mass Storage selected and up-to-date USB drivers. Try selecting USB-Debugging and Stay Awake in the Development option of your phone. If that doesn't fix it, then I have a few other ideas.

Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.

I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?

catire said:
Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.
Click to expand...
Click to collapse
I'm sure usb door is completely opened

Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.

Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.

jgchaval said:
I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?
Click to expand...
Click to collapse
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!

climber1872000 said:
Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.
Click to expand...
Click to collapse
A friend of mine, who bought the same phone on the same day as I did, plugged in his phone on my computer using my cable to the same port my phone was connected, and he did get the "USB Connected" notification on his phone
govgeek said:
Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.
Click to expand...
Click to collapse
No, i'm using the default launcher that comes with the Captivate

jgchaval said:
Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!
Click to expand...
Click to collapse
I just did the new AT&T update and mine is now having this problem. I have to manually go into manage applications > usb settings > mass storage to get it to work now

a.n said:
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!
Click to expand...
Click to collapse
I did all that yesterday, but the device ain't listed in the USBDeview nor it shows up in the Device Manager

did you finally fix this problem? because I'm having the same issue here

Same here. It was working fine, I could connect to Kies, transfer music in Media mode and see both sd drives in Mass Storage mode. Then I rooted today and now I get nothing. In anything but Kies mode I get the Windows Bong of Recognition, but still not visible in Explorer. Also, my Home screen stays active instead of switching to the USB animation like it did before. I know this can't be a consequence of rooting the phone, can it?
EDIT: More weirdness, with the phone connected in Mass Storage mode if I look at My Computer in Explorer there are 2 extra drives showing, but they are greyed out and when I click on either of them it asks me to insert a card as the drive is empty. WTF???

UPDATE: I unrooted and managed to get my USB connection back to working. It is still a bit flaky as I sometimes have to disconnect/reconnect several times before it works, but at least it now works although it sometimes loses sync in the middle of transferring a file. Can't imagine why simply rooting the phone would cause the loss of USB connectivity. I am going to reroot and see if it occurs again.

OK, a rerooted the phone and this problem is now back. I have no problem connecting while in debugging mode. I installed OCD (non-Market apps mod) and when I turn off debugging and connect I get the Windows bong and see the USB icon in the Notification bar, but the MTP screen never comes up and I can't see the phone in Explorer (Mass Storage mode) or in WMP (Media mode). Kies can;t see it in that mode, either. I really don't want to have to unroot every time I want to look at the phone contents. Any ideas? PLEASE!

I'm having a similar problem - I installed the Perception ROM and immediately afterwards I can't see the USB connection at all from my PC or my Mac. The USB icon on the phone does not come up either.
I'm trying to get my hands on a different cable - but the weird thing is when I plug the USB into my computer the phone starts charging for like half a second and then stops.
This is really annoying. I tried changing the rom to Cognition 3.02 but that didn't change anything.

There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.

avgjoegeek said:
There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.
Click to expand...
Click to collapse
This isn't my first rodeo... But to answer your questions:
I used the rooting method posted in XDA forums - the one-click rooting.
I've used the drivers included in the xda-forum. Not the kies software.
The only thing that changed was the loading of a new custom rom. The cable works (confirmed on my friend's phone). I can't get odin to restore back to stock because I can't get the computer to recognize the phone in either normal or in download mode. I've restored to stock using the jh7 in the stickied q&a thread
I don't think it's a hardware issue either - I think it's software-based. I'm going to try to take it to an at&t store today at lunch to see what they say.

I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.

greeto4 said:
I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.
Click to expand...
Click to collapse
What rom are you on

Cannot connect bionic to my new laptop

I have a rooted bionic with blurr3d rom installed. i just got a new laptop, installed the moto driver, tried connecting my phone but laptop cannnot read my phone. I noticed that i dont have the usb conection option anymore(or dont know where to find it)
Any help would be nice...

Can you give some more info, what kernel are you on right now?

Does the phone make any sound or indication that it is connected when you plug it in to the laptop?
If there is a USB connection, there should be an icon on the notification bar and there should be a notification for "USB connection" when you open your notifications. If you select that, it should bring up the usual USB connection menu.
I've heard of some people having issues with connections on USB ports that get low power. On desktops, people generally recommend using the ports on the back because they receive more power, apparently. I've also heard of similar issues on a laptop, though you don't have the convenient option of using another set of USB connections. Most of that has been information I've seen for stuff like flashing something on the device, so I'm not sure if that would be an issue for the basic USB connection.

Try a different USB cable.

[Solved] USB Mass Storage Mode Issues (CM7)

I am having issues with the activation of USB Mass Storage mode on CM7 v7.10. When I first connected my nook (just got it yesterday), I was able to enable mass storage mode as per normal. However, after this it's just stopped working!
There's nothing wrong with the cable afaics because the empty drives come up on the PC (Win7) no problem, it's just that the nook doesn't detect that the USB is plugged in and so never gives me the option to enable Mass Storage mode. I have had success once running ROM Manager's 'Fix Permissions' function, but since then it's not made any differences. The issue remains on multiple PCs with multiple cables.
Anyone got any fixes for this issue?

+ can you wiggle the micro-usb end a bit to see if anything better?
+ do you have the "usb debugging" check?
+ do you see the usb icon displayed on the NC notification bar?

- No wiggling makes any difference
- Tried with USB debugging on and off - no difference
- No USB icon (but empty drives still show up on my PC) so there is some kind of connection going on.

If the empty drives do show up on the PC, it definitely some sorts of connection made, it's a good sign.
Now back on your NC, go into Storage, try to Unmount then Remount the uSD and see if it gets any going.
Note: leave the Debugging USB Mode on.

Might also be worth considering moving from 7.1 to the MiRaGe 7.2 build. I'm not saying there is a specific fix but using the later ROM may help and I think most people find it more stable, faster and problem free.

Yeah, I actually updated to KANG 7.2 this avo and the USB Mass Storage option is back!
Thanks everyone for your suggestions!

I currently having KANG Mirage 7.2 with Tablet Tweak but it did not work. I bought an OTG cable from ebay so I assumed it's bc the OTG cable. The Drive works fine on my laptop but nothing appears on the Nook.

Maybe a re-flash with the same ROM might do the trick?

I'll try to reflash sometime soon!
Will post

uSB mass storage
I had the same issue. Have the USB connected and while connected reboot your device once it has rebooted you'll be able to access the USB files on your device. You'll be able to see the USB signal at the bottom, which you can activate. You'll have to do this most likely everytime you want to access USB storage

tinydog13 said:
I had the same issue. Have the USB connected and while connected reboot your device once it has rebooted you'll be able to access the USB files on your device. You'll be able to see the USB signal at the bottom, which you can activate. You'll have to do this most likely everytime you want to access USB storage
Click to expand...
Click to collapse
I tried it this morning but it nothing appeared to work.

tinydog13 said:
I had the same issue. Have the USB connected and while connected reboot your device once it has rebooted you'll be able to access the USB files on your device. You'll be able to see the USB signal at the bottom, which you can activate. You'll have to do this most likely everytime you want to access USB storage
Click to expand...
Click to collapse
I'm on MIRAGE 7.2 running off EMMC. SD card is in the Nook.
I shut nook off, plugged in the cable to my pc and started the nook.
5 drives show up but I cannot access any of them. The USB icon is in the tray on the Nook and it says "USB connected". Just above that it says, "USB debugging connected"
Anybody have any success?
After doing some reading I've decided to use ES-FILE Explorer wirelessly. Its very easy to use. You need to SHARE folders on your PC in order for it to access the files.

Playing around with the USB option some more, I didn't realize that you could TOUCH the message in the notification bar. When you do, it launches a program and from there, you turn the USB connection on or off.
Geeeeeeez........ya learn something new every day.

Andriod Auto drops out on new Sony XAV-AX5000.

I had the Sony XAV-AX100 and everything worked great. I just switched to the AX5000 and now AA drops out all the time. It will either freeze up, or it will come up with a warning that there is no connection to USB. I have tried a different usb cable. Same problem. I am using the same phone Galaxy S8 and the same high end USB cable. I uninstalled AA from phone and re downloaded it. Same thing. It is very random. It will boot up AA just fine then go to Pandora play a song or two then drop all connections. If I unplug and wait and plug phone back in it will work for a short time then drop out again.
Anyone have any thoughts on what to try here?
I have talked to Sony chat session not much help here.
Thanks

I talked to Sony a little bit (from what I could understand) They think it is a MSC "Mass Storage Connection" connection with USB. But Android has not had a MSC connection since maybe 2015. So why would this be happening now with this firmware? Anyone have any suggestions on how to get phone to a MSC USB connection instead of MTP? Or the radio to use the standard MTP connection on every Android out there.

I got the AX5000 on Monday and have been fighting the same issue. I have a Samsung Galaxy S7 running Oreo (8.0) and have tried everything from a physical perspective (cables, flash, factory resets) but no luck. When I spoke with Sony today, they tried to tell me that AA was not supported on my car (2012 Jeep Wrangler) which ignores the fact that this is an after-market upgrade. I agree that it's likely an issue with how the head unit communicates with the phone. The only place I have found to change USB settings is under the Developer Options. The available options are Charge this phone, MTP (Media Transfer Protocol), PTP (Picture Transfer Protocol), RNDIS (USB Ethernet), Audio Source, and MIDI. I'll try each of them and resort back on the results.

Yes with talking to Sony they said that the phone USB has to be set to MSC for USB1 to work. Well you would think that they would know that has not been used on android run phone for years. I tried developer mode and setting debugging to on. and even tried different USB configurations in debugging. like Switching it to Audio Source. As soon as plug my phone in it kicks it back to MTP. This is a easy fix for Sony they have the MTP setting on the USB 2 wire. But we will see how long it takes them to do an update on this since they just did one last week. Very frustrating I have the AX5000 on my Harley. So it is not very convenient to mess with it.
Please do post if you find some kind of solution: As I am sure Sony will be awhile.

I had the same result with attempting to switch the USB mode. It switches back when the phone is plugged in. A firmware update may be our only hope.

Well not sure if I found a possible fix. I put my phone in developer mode. Then switched the USB to debugged. and used my original USB cord that came with the S8. For the limited time that I have been able to check it out it has worked. Keep in mind this is on a Motorcycle. So time to work on this is limited. The problem I have is that the original cord is 4' long and I have no where to tuck it in. I have tried several different short cords (amazon) and they all will work for a bit but AA stops randomly.
I still think it is funny When I talked to SONY they said that this radio would not work with my phone USB protocol. But I have talked to several people that say they have no problems with same phone & same radio.
Anyone know where to get a 1' USB cord that would be the same as stock Samsung S8 cord? Yes I check with US cellular. Phone carrier..
Thanks

Does anyone know if Sony has fixed this issue yet? This is really the only deck I want. The 2330 was another I was looking at but the screen is resistive.

Still an issue for me. No firmware update beyond 1.01 and no settings or application conflicts that I've found.

https://ap.community.sony.com/s/que...sing-a-samsung-galaxy-s7-edge?t=1538077755876

connection to AA should automatically set your USB to MIDI.
if it doesn't, try setting MIDI manually before connecting the cable (and double check it after connecting).

Yeah, tried that with my Galaxy S7 and it auto-switches it back.

I have it working using a Pixel 3 XL.
First, enable developer options
Settings > About phone > tap Build number 7 times
Go back to Settings, then System > Advanced > Developer Options > Default USB Configuration > Set to MIDI