I have a rooted bionic with blurr3d rom installed. i just got a new laptop, installed the moto driver, tried connecting my phone but laptop cannnot read my phone. I noticed that i dont have the usb conection option anymore(or dont know where to find it)
Any help would be nice...
Can you give some more info, what kernel are you on right now?
Does the phone make any sound or indication that it is connected when you plug it in to the laptop?
If there is a USB connection, there should be an icon on the notification bar and there should be a notification for "USB connection" when you open your notifications. If you select that, it should bring up the usual USB connection menu.
I've heard of some people having issues with connections on USB ports that get low power. On desktops, people generally recommend using the ports on the back because they receive more power, apparently. I've also heard of similar issues on a laptop, though you don't have the convenient option of using another set of USB connections. Most of that has been information I've seen for stuff like flashing something on the device, so I'm not sure if that would be an issue for the basic USB connection.
Try a different USB cable.
Related
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
a in yul said:
laptop no longer recognizes tilt or tytn; changed usb cables; rebooted both devices and laptop; no go..
mssg I get is "one of the usb devices attached to this computer has malfunctioned. and windows does not recognize it"; any suggestions; cannot sunc nor tether via ISharing.
tia
Click to expand...
Click to collapse
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
thx...
@[email protected] said:
Hi
First of all try to reinstall Microsoft ActiveSync, than in the ActiveSync options, in your device, be sure that in "Connections..." setting "Synchronize all PC by this connection" is checked and below "USB" showed!
Otherwise, if your device, when connected to the PC, also doesn't charge (if you have this option enebled on your PDA!) there is some problem on your PC settings concerning the USB! Try to connect to someother PC to test it!
Ciao
Click to expand...
Click to collapse
hello there, first n foremost thanks for your input!
Before trying out your possible solution i tried to connect and for some reason i was able to connect via the device today...??!!
i really dont know why, but will try your soln if this situation reocurrs.
NB: this happenned to me twice in the last 3-4 months, n i never figured out the cause ??
any other advice or ideas gratefully accepted.;
its probably the same as me and loads of other people - the pins have bent on your usb connector - probably caused by using non standard chargers and usb leads. Its been widely reported. The non-standard leads have too much space around them when plugged in and wiggle causing the connector on the tytn II to bend. Try using the lead which came in the box and see if it helps. and try using the charger that came with it too.
Can bent pins be fixed?
Hello -- I'm one of those people with a non-recognition problem. Is it possible to fix the bent pins? My problem seems to have begun around the time I lost my original USB cable. Now, all the cables I have -- ones that have been specifically sold to work with my HTC Tilt -- have the symmetrical, sort-of-trapezoidal mini-usb connection, rather than the rectangle-with-one-corner-cut-off shape of the original cable. I should say these cables do charge my device, but none of my computers recognizes it as a USB device.
Help?
Thank you,
J. Georgia
bent pins continued
I should add that the charging cable that originally came with my phone has the same connector shape, so I'm not sure what's going on.
USB Device not recognised
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
axeman said:
This is known to happen at times win Windows, and not just for the TYTN2 but a myriad of devices.
The fastest fix for this:
Reboot ur PC/ Laptop.
If this Doesn't help - Then add in a reboot for the TYTN 2 also.
The problem will go away for some time.
I know its annoying, but this is way faster than troubleshooting for contacting MicroShaft Support.
Click to expand...
Click to collapse
Unfortunately this is no soution for me. I seem to have this problem as well, since about two weeks.
I use two notebooks (Dell & Acer) and both do not show any activity when connecting my Kaiser to the original USB cable. The device is not even switched on when I connect it, nor does this happen when I connect it to the (original) cable in my car, which did work before.
Charging works fine, both in the car and when connected to both notebooks, but no Sync at all.
I have tried another USB-cable with the same result, so I suspect some hardware-problem causing me to be unable to copy files between my notebook and my phone and worse, rendering me unable to flash a new ROM onto it.
Who knows what to do next?
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
I have had similar problems with my touch pro in the past, even bluetooth internet sharing eventually gave up the ghost.
I tried a myriad of leads and then eventually reinstalled active sync- which did the trick.
USB sync not working
[email protected] said:
I am mystified, too. USB Charging and audio connections work. I have rebooted my computer and done a soft reset on my phone several times, to no effect. I uninstalled and reinstalled Windows Mobile Device Center. Still nothing at all via USB. Once, yesterday, I somehow got a Bluetooth connection long enough to sync, but haven't been able to since then. Even then, Windows Media and AudibleManager couldn't see the phone. The really weird thing is, I can see the phone connection in my Bluetooth manager, but even with all the proper boxes checked, I can't sync. When I try from my device, I get an empty progress box which disappears after a fraction of a second. When I try from my computer, it says the device is not connected, but doesn't give me any option to connect.
Would a hard reset help?
If so, would returning an unlocked AT&T Tilt to factory defaults lock it back up? And what do I do if it does?
Please help!
J. Georgia
Click to expand...
Click to collapse
I've had the same problem with my first Tilt. There's multiple threads that detail this known problem. Some seem to be due to bent pins, some are general hardware failures (possibly the USB controller). There are some HardSPL images out there that have a "force usb" option enabled. This never worked for me, but it might be worth a shot for you.
...a word of warning....
If you end up reflashing your phone (via MicroSD) and the flash goes bad, you may be stuck, as many of the solutions for repairing a bad flash require you to USB sync. My first Tilt was a victim of this after a bad stock ROM flash that left my device without audio, and unable to flash via MicroSD.
replace usb board
you need to replace your usb board. It will run you less than $10 if you do it yourself. you can get the board on ebay
really? 4 years later?
I have a weird problem with my USB port (I assume it's PC related but...?).
I can connect and sync my kaiser with a std or the HTC USB cable but if I cradle it in the Seidio or connect the 3-1 adapter I get the response "unknown USB device". Strange enough is that NONE of the two is charging. At other PC's it sometimes works, sometimes not. I assume my USB drivers of my Dell Optiplex are toast but how to reinstall...
Well, start with checking to see if under settings------->connections-------->"usb to pc ", the usb to pc option doesnt have " enable advanced networking functionality" checked ( enabled ). That will most times cause issues with activesync connecting and especially prevent USB charging.
Next, check to see if actvesync is set to use USB as an active connection type under its settings.
Delete any previous activesync pairs you may have and try to reconnect. I somehow doubt its your drivers but the best way to check is to just go to Microsoft.com, navigate to their downloads section, and download a new copy of activesync.
One last thing to check. Some roms have a battery option (settings ----------> power-------> battery tab ) that doesnt allow charging when connected to a PC. Make sure that is NOT checked.
Thanks for your reply.
I tried all you mentioned beside uninst. AS clean the PCs reg and reinstall.
Will let everybody know.
When I connect the X1 via USB it charges the device but won't connect to either of the PCs I have tried.
I have disabled the Enhanced Activesync connections, changed from AS to external disk & tried the things that I can easily find.
Anyone got any ideas, I don't really want to send it away ?
Does your ActiveSync work?
I went into menu -> settings -> connectivity, and set the USB connection to "Always Ask" when connecting to a computer so that it would ask me if I want to use Charging/Mass Storage/Media Sync/etc. Even with that box checked, no matter what I do, when I connect the phone to my computer, it does NOT ask me what USB connection mode to use. Can anyone else confirm whether or not they experience this problem?
Thanks!
SOLVED - driver conflict with my Samsung Epic. Connecting one then the other wreaks all sorts of havoc.
call Verizon or LG for that support..OR try your control panel windows settings..devices
pissinguoff247 said:
I went into menu -> settings -> connectivity, and set the USB connection to "Always Ask" when connecting to a computer so that it would ask me if I want to use Charging/Mass Storage/Media Sync/etc. Even with that box checked, no matter what I do, when I connect the phone to my computer, it does NOT ask me what USB connection mode to use. Can anyone else confirm whether or not they experience this problem?
Thanks!
Click to expand...
Click to collapse
Is the little USB symbol showing up in the notification bar?
If not...try a different USB port on the computer.
Sounds dumb, i know...but it worked for me today when I had the same problem. And I think I recall it working on my old Incredible.
SOLVED
SOLVED - driver conflict with my Samsung Epic. Connecting one then the other wreaks all sorts of havoc, between mass storage mode and whatnot. When I switch the LG from charge to mass storage and back on the fly, it's doing something to the samsung drivers. When i reconnected my samsung, then the LG again, things went cuckoo for cocoa puffs until I rebooted.
I can't post a new topic as I have less then ten posts but I have an issue with my connectivity as well. When unplugged the phone still shows the USB icon in the top left corner like it is plugged in. However when plugged in the phone will charge but when connected to a computer mass storage mode will not work or show up. I have tried it in windows xp/ osx on my MacBook. Windows 7 on my desktop and nothing. The drivers are good as it was working before. I have done a wipe/data, restored back to cubed 1.1 mod and it is still doing it. It doesn't bug me that bad as I use andftp to move my apostle back and forth from my NAS to sdcard. But I would like it fixed as trying to put music or ISO's for my psx emulator can take a minute over the wifi. Any help would be appreciated.
Sent from my VS910 4G using Tapatalk
Why am i getting a Factory data cable connected and i cannot switch between usb modes?
The phone charges fine when plugged into the usb port, but I get usb device not recognized errors. It doesn't even popup to install any drivers.
I've tried installing the motorola drivers manually, but that didn't work either. I'm using the cable that came with my lg revolution as verizon said that would work just fine for the bionic. It does, but just for charging not managing the sdcard, etc.
When you plug it in, pull your status bar down, then select your USB mode. Make sure you don't have it set on charge only.
Sent from my DROID BIONIC using XDA
There is no usb notification on the pull down bar for some reason. Not even toggles for wifi, bluetooth, etc on the pull down bar.
Verizon is sending a bionic cable =/.
Check to make sure that your usb ports are working, my laptop shorted out all its usb ports at once while my bionic was plugged in. Also make sure that the cord is plugged in correctly to your phone and computer
If its charging but doesnt show anything in the pulldown, either your USB ports arent running correctly or the cord isn't supported for usb transfers.
I am having the same issue with my wife's phone. We both have Bionics and I have tried both cables on both PCs, mine works flawlessly on all, but her's will not detect a USB connection except to charge. Plugging the USB cable in shows battery charging but will not prompt for USB mode.
When Windows detects the device the driver install fails saying "Device unplugged"
Having usb debugging checked under apps can cause similar problems also.
I have to select Turn on usb storage. then unplug the cable and plug it in again. selecting turn on storage again usually does the trick.
This is on AOKP SELFKANG roms. YMMV
Have tried unticking USB Debugging, did not resolve issue.
Unable to toggle USB Storage as the phone does not detect and prompt when plugged in. Has worked previously, just stopped.
Just got the cable Verizon sent me, it's not even working either. I get no prompt to enable usb, I've tried usb debugging on and off, tried every port on my computer, this cable is the only thing that will not work in any port, the ports are good since I have other things in the same ones I've tried.
Now motorola is sending me a motorola cable after making me do a factory reset to test the one Verizon sent me -_-. God, I'm getting tired of reinstalling/setting up everything. There's no way to backup, etc without being rooted is there?
Let us know if the Motorola cable fixes it.
unfortunately, no you can't back up your phone w/o it being rooted.
that sucks about the cable, I would be all over VZW sending you a new phone if the cable from Moto doesn't work. It should be covered under the hardware warranty and should only cost you shipping.
have you tried either cable on a different computer altogether?
I had this very same problem on my samsung Captivate and then again on a brand new LG Thrill. they had worked fine connecting to W7 ultimate. then one day nothing. got the USB failed error. no USB connect option on the top bar. got the LG replaced last week. hooks up fine just like the last one.
Moto cable, 1st plugin and it works fine -_-.
at least it is working now, makes no sense why some of these devices can use literally any micro usb cable you can find (mine is this case) and others you HAVE to use the Moto cable or nothing will work.
That makes so little sense. I have two Motorola cables, the ones that came with the phone, and neither of them are working with my wife's phone.
from my Experience, Only the stock Bionic Cable works right. Others dont charge as fast and wont let me mount to pc. Not sure why. Guessing maybe the Bionic cable is set to higher frequencies since its a Dual core phone?
Well, as an old RF engineer I will make a guess. I recall folks saying the inside two pins carry the data. The data rate is certainly high enough to cause problems if the cable is made wrong. I will look in my old test equipment pile and see if I have a way of checking the cables I have.
I do not have a Motorola cable to test, but I do have cables from VZ that do not work. I may be able to check the data waveform in the time domain and see what it looks like (amplitude, slope, and shape). A TDR would be nice, anybody have one?
Uninstalling usb devices might help
I had the same issue with my bionic. Before the bionic I had the OG Droid, the X, and 2 X2's. So I had a plethora of seemingly identical OEM moto cables. I still couldn't say which one came with the bionic. That said, none of the cables worked consistently. I had the best luck uninstalling everything USB in device manager on my pc.
Go to start, right click on "computer", and then click on manage.
In the window that opens, on the left side under system tools click on device manager.
Then in the right side of the window navigate to USB controllers and expand.
Uninstall everything that is listed, but don't delete drivers if prompted.
After everything has been deleted, right click on computer at the top of the window and scan for changes.
This will reinstall everything and clear out any errors on the bus.
From there I have had mixed results depending on whether I had the phone connected when I rescaned for new devices. Sometimes it would work if I had the bionic connected and sometimes it wouldn't work unless I waited until all of the USB devices reinstalled and then connected the bionic.
Another thing that seemed to help was to unmount the sd card on the bionic settings>storage, and then remount.
Again, nothing worked consistently except replacing my bionic with a rezound.
OK, I have finally been able to get my Bionic to work. And the truth is, there was nothing wrong with the Bionic!
I asked VZ to send me a data cable, after two tries I still didn't have one. So I called Motorola and they sent me a data cable, the cable number is: SKN6378A.
Worked like a charm.
I think I know why this is happening. From my conversation with VZ customer support I can tell the cable list is not descriptive enough to help them make the correct selection.
Yes the data cable that came with the LG Revolution would not work on the bionic, also the new cable has a larger diameter.