Download mode for captivate. - Captivate Q&A, Help & Troubleshooting

I recently flashed cm7 onto my phone. Now I want to go back to 2.1 again but I can't get my phone into download mode anymore. No matter whatever method I try they never work. Is there anything I can flash onto my phone to give me a download mode option like serendipity?

namesjason said:
I recently flashed cm7 onto my phone. Now I want to go back to 2.1 again but I can't get my phone into download mode anymore. No matter whatever method I try they never work. Is there anything I can flash onto my phone to give me a download mode option like serendipity?
Click to expand...
Click to collapse
I think your best bet would to be to learn adb. It is very useful with many aspects of your phone. You can indeed get into download mode through adb most of the time (if not everytime) if your phone boots up.
http://developer.android.com/guide/developing/tools/adb.html

Can you just tell me how to use adb just for download mode? Is there a guide?

same thing happened to me, i cant go to download anymorr!!!!!!!!!!!!!

Well you will need to Download and install SDK for android. Once install open the programs folder and shift+right click Tools folder and open cmd from there. There you have access to ADB commands, one your interested is "adb reboot download".
A good simple guide for adb commands is this. Thanks the creator of that thread if it helps.
edit: for windows 7 and vista the tool folder should be in C:/program files(x86)/android/android-sdk-windows/

You could try the Captivate AIO (All In One).
http://forum.xda-developers.com/showthread.ph-9++9p?t=944418
I've used it a couple of times. Just make sure USB debugging is checked, and give it a second to recognize your phone.

Only problem is.... CM7 is based off of Nexus S. There isn't an ADB way to get into DL mode on it. It's hardware only.

Twicebak3d said:
Only problem is.... CM7 is based off of Nexus S. There isn't an ADB way to get into DL mode on it. It's hardware only.
Click to expand...
Click to collapse
My knowledge with Cm7 is limited but isn't based off Nexus S? Can't you just install Nexus S drivers and adb should recognize it? Just curious.

prbassplayer said:
My knowledge with Cm7 is limited but isn't based off Nexus S? Can't you just install Nexus S drivers and adb should recognize it? Just curious.
Click to expand...
Click to collapse
It will recognize it, but you can't software boot into download mode with it. Pretty much every other command works. But yes, with CM7, you install Nexus S drivers for debug.

Well that sucks then guess his only shot is a jig then?

prbassplayer said:
Well that sucks then guess his only shot is a jig then?
Click to expand...
Click to collapse
If OP can't 3 button (Hold vol up/down + power while inserting USB) or vol up/down + insert USB into DL, then yes.

Well this sucks anyone know where I can buy a cheap jig?

namesjason said:
Well this sucks anyone know where I can buy a cheap jig?
Click to expand...
Click to collapse
You can get them in ebay or MobileTechVideos

namesjason said:
Well this sucks anyone know where I can buy a cheap jig?
Click to expand...
Click to collapse
Does your three button not work? Have you tried the volume+/volume- plus plug in USB cable plugged into PC? I have NEVER had that fail for me. But mine is a 1007 build with no three button issues ever.
I also have a. USB jig that I made and one from mobile tech videos from the link posted above. The best $8 buy to AOWAYS have on hand ANYTIME you flash ANY rom.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted

Related

[Q] I am stuck in infinite boot, please help.

I was running on cognition and I decided to apply a speed kernal. I did, but I was not aware that it wasn't compatible with froyo. Now my phone shows the AT&T thing, says some weird techno voice thing, then restarts the process. I have tried holding volume up and volume down and power in order to get to recovery menu and it doesn't work. I have tried syncing with my computer, but it wasn't set on debugging beforehand so odin does not recognize it. I have tried everything I can think of yet to no avail.(spelling?) I really like my captivate and I could not bear to part from it. Any help would be appreciated.
caleb220 said:
I was running on cognition and I decided to apply a speed kernal. I did, but I was not aware that it wasn't compatible with froyo. Now my phone shows the AT&T thing, says some weird techno voice thing, then restarts the process. I have tried holding volume up and volume down and power in order to get to recovery menu and it doesn't work. I have tried syncing with my computer, but it wasn't set on debugging beforehand so odin does not recognize it. I have tried everything I can think of yet to no avail.(spelling?) I really like my captivate and I could not bear to part from it. Any help would be appreciated.
Click to expand...
Click to collapse
Have you tried using ADB to get into download mode. The only way to fix this will be to reflash stock and start over. You could also use Odin one click to flash back to stock as I dont thing debugging needs to be on for the download mode to work
http://forum.xda-developers.com/showthread.php?t=731989
Do not panic, did you pull the battery when the voices were going, that was voodoo installing and is normal.
You can recover and will
zelendel said:
Have you tried using ADB to get into download mode. The only way to fix this will be to reflash stock and start over. You could also use Odin one click to flash back to stock as I dont thing debugging needs to be on for the download mode to work
Click to expand...
Click to collapse
I can get into download mode, I just cant get into recovery mode.
mcord11758 said:
http://forum.xda-developers.com/showthread.php?t=731989
Do not panic, did you pull the battery when the voices were going, that was voodoo installing and is normal.
You can recover and will
Click to expand...
Click to collapse
I did pull the battery during that time. I tried using Odin, but it doesn't recognize my phone. I think it is something I am doing wrong however.
The voices were normal.
List what you are doing to try to use odin. Need to know what your doing to identify a mistake.
Have you tried getting into recovery again
mcord11758 said:
The voices were normal.
List what you are doing to try to use odin. Need to know what your doing to identify a mistake.
Have you tried getting into recovery again
Click to expand...
Click to collapse
I have tried getting into recovery again, but it goes through the cycle no matter what.
First: I downloaded the USB drivers from the Samsung Website and installed them.
Second: I downloaded Odin once click
Third: I take the battery out of my phone along with the sim card and micro SD card. Then I replace the battery
Fourth: Open Odin and plug in the USB sync cord
Fifth: I hold down the volume up and volume down buttons on the phone an insert the USB sync cord.
Sixth: A droid is pictured sweeping inside of a yellow triangle.
Seventh: I wait
Then after that, Odin doesn't recognize the phone.
Are you using the original cord that came with phone? Are you using a desktop or laptop? have you tried different usb ports? Have you tried the drivers on the odin thread?
http://forum.xda-developers.com/showthread.php?t=731989
mcord11758 said:
Are you using the original cord that came with phone? Are you using a desktop or laptop? have you tried different usb ports? Have you tried the drivers on the odin thread?
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
I got it off ebay and it did not come with a cord. I bought one off ebay that claimed to be OEM. I am using a laptop. I will try different USB ports but I dont think that is the problem. My computer recognizes the phone, just not Odin. I will try the drivers on the thread.
Ports can make a difference, so can the cord
mcord11758 said:
Ports can make a difference, so can the cord
Click to expand...
Click to collapse
I tried using the drivers from that sight, but they always say it failed. Currently using different port.
mcord11758 said:
Ports can make a difference, so can the cord
Click to expand...
Click to collapse
Drivers from that sight failed to install. I am now using a different port.
Does your cord have samsung on it anywhere?
What happens when you plug the phone in? Does your computer say not recognized device?
caleb220 said:
Drivers from that sight failed to install. I am now using a different port.
Click to expand...
Click to collapse
sorry about the double post. New port didn't help it.
mcord11758 said:
Does your cord have samsung on it anywhere?
What happens when you plug the phone in? Does your computer say not recognized device?
Click to expand...
Click to collapse
10 charsssss
mcord11758 said:
Does your cord have samsung on it anywhere?
What happens when you plug the phone in? Does your computer say not recognized device?
Click to expand...
Click to collapse
It says that it needs to install driver software.
mcord11758 said:
Does your cord have samsung on it anywhere?
What happens when you plug the phone in? Does your computer say not recognized device?
Click to expand...
Click to collapse
Cord has a blackberry logo on it?!? OEM my....Just now noticed that.
caleb220 said:
It says that it needs to install driver software.
Click to expand...
Click to collapse
Try clicking on it. Should ask you to locate drivers. You said you have samsung drivers. I think c drive/program files/samsung/usb driver.
Grab the computer by the hand and walk it there
caleb220 said:
Cord has a blackberry logo on it?!? OEM my....Just now noticed that.
Click to expand...
Click to collapse
Could be your problem but may not be
mcord11758 said:
Try clicking on it. Should ask you to locate drivers. You said you have samsung drivers. I think c drive/program files/samsung/usb driver.
Grab the computer by the hand and walk it there
Click to expand...
Click to collapse
I have tried that several times but it doesnt work. It says that the directory doesn't exist.

My SGS is stuck at bootscreen, HELP Please.

Here is the thing:
I was on JPY (rooted) and i flashed (voodoo lagfix) my phone sgs Kernel flasher (it worked before more than once). It restarted and then...nothing. It's stuck on that screen. I can't get in recovery mode nor download mode.
The phone is not even detected by the pc.
I already tried that trick which suggest to remove battery and reboot, but nothing.
Guys, Help, Please.
How about download mode? Can you access that?
Nope. I can't access download mode either.
Help? Please?
http://forum.xda-developers.com/showthread.php?t=819551
jje
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=819551
jje
Click to expand...
Click to collapse
OK i've take a look and i'm quite sure it won't work either. Why? because i noticed that even the battery icon doesn't show up when i put it in charge i just get that ajax loading icon (which freeze) and then nothing.
isn't that rather an internal sd trouble? That's my guess please let me know what you think.
Well, at the current stage you have two choice. Try the homemade jig or bring it back to Samsung for a refurbished unit. Pick one.
snapper.fishes said:
Well, at the current stage you have two choice. Try the homemade jig or bring it back to Samsung for a refurbished unit. Pick one.
Click to expand...
Click to collapse
i think i only have one choice : bring it back to samsung since the file system is totally corrupted.
somboo said:
i think i only have one choice : bring it back to samsung since the file system is totally corrupted.
Click to expand...
Click to collapse
Have you tryied going in recovery via adb?
figifigi said:
Have you tryied going in recovery via adb?
Click to expand...
Click to collapse
How so? Please tell me what you get
Edited: I just tried and the device is not detected
i got this:
List of devices attached:
(nothing here)
Commands i tried:
adb shell reboot recovery
and
adb reboot recovery
somboo said:
How so? Please tell me et you get
Click to expand...
Click to collapse
Do you have android sdk installed on your computer?
figifigi said:
Do you have android sdk installed on your computer?
Click to expand...
Click to collapse
http://developer.android.com/sdk/index.html
Yes i have. And i'm a little familiar with adb commands .
But sadly the phone just freeze with the bootloader.
But hey give me what ya get
somboo said:
Yes i have. And i'm a little familiar with adb commands .
But sadly the phone just freeze with the bootloader.
But hey give me what ya get
Click to expand...
Click to collapse
I had i similor issue, and i tryed to connect via adb..
try to see if your phone is connected with fx: c:\androidsdk\tools\adb devices
if so then type c:\androidsdk\tools\adb reboot recovery
this all depends on where your androidsdk files are located on your computer.
figifigi said:
I had i similor issue, and i tryed to connect via adb..
try to see if your phone is connected with fx: c:\androidsdk\tools\adb devices
if so then type c:\androidsdk\tools\adb reboot recovery
this all depends on where your androidsdk files are located on your computer.
Click to expand...
Click to collapse
I tried this. My phone is not detected. When you had this issue could you see the battery icon? Or when you plug in your phone in pc could you hear that small sound? cause in my case i don't.
No battery icon, but i heared the small sound..but i tryed severel times before the it rebootet in to recovery.
What about the 3 button solution, and then connect via odin..does it reconize your phone?
figifigi said:
No battery icon, but i heared the small sound..but i tryed severel times before the it rebootet in to recovery.
What about the 3 button solution, and then connect via odin..does it reconize your phone?
Click to expand...
Click to collapse
I tried that 3 buttons combinaison so many times i can't count. I think the bootloader doesn't even load properly. That fact that i don't have that sound is a frightening.
somboo said:
I tried that 3 buttons combinaison so many times i can't count. I think the bootloader doesn't even load properly. That fact that i don't have that sound is a frightening.
Click to expand...
Click to collapse
Could you go to the 3 button combination before this happened?
figifigi said:
Could you go to the 3 button combination before this happened?
Click to expand...
Click to collapse
Yes. I could. Adb worked then too.
somboo said:
Yes. I could. Adb worked then too.
Click to expand...
Click to collapse
Hmm, i dont know any other methods to connect to the computer at the moment

[Q]Captivate Bricked?

Yeah, there are probably 1000s of threads out there, but I haven't read a case like mine. So I do the battery thing and vol buttons and Odin opens up and reads the COM pot. The only problem is that my phone is stuck on a i9000 screen and Odin is stuck at file analysis...
Help please?
Edit: I just tried to do it again, with another method, it keeps on going back to the battery screen...
What build is your phone, located under battery mine is 1008
mcord11758 said:
What build is your phone, located under battery mine is 1008
Click to expand...
Click to collapse
It's 1008 too. Why?
Trouble shooting
Ok so when you run odin it gets stock where? Have you tried more then once?
Pull battery lange it out for a while, try again
miahsoul said:
It's 1008 too. Why?
Click to expand...
Click to collapse
mcord11758 said:
Trouble shooting
Ok so when you run odin it gets stock where? Have you tried more then once?
Pull battery lange it out for a while, try again
Click to expand...
Click to collapse
Well, the problem is mainly b/c I can't get into download mode. I can get ODIN to recognize the system, but the problem is that the system isn't in download mode and that it gets stuck on File Analysis. I've tried at least 30 times pulling out the battery, and pressing vol, plugging in the cord and battery and it keeps on going to the battery screen. :S
Getting into dl mode
open odin
Bat,sim, ext sd out
Bat back in
Vol up and down while plugging in usb
android with shovel
Click start in odin
Can you confirm you did this
I am three deep, picking up my pace
miahsoul said:
Well, the problem is mainly b/c I can't get into download mode. I can get ODIN to recognize the system, but the problem is that the system isn't in download mode and that it gets stuck on File Analysis. I've tried at least 30 times pulling out the battery, and pressing vol, plugging in the cord and battery and it keeps on going to the battery screen. :S
Click to expand...
Click to collapse
If the method I posted won't work this if what you need
Jig
http://www.youtube.com/watch?v=D0aoabVtPJ8
can you connect using ADB? if so you can reboot into download mode.
type in
adb devices
if your phone is listed then you can try
adb reboot download
if not then what mcord suggested with the jig will work.
neotekz said:
can you connect using ADB? if so you can reboot into download mode.
type in
adb devices
if your phone is listed then you can try
adb reboot download
if not then what mcord suggested with the jig will work.
Click to expand...
Click to collapse
Lol, what is ADB. Sorry I'm a noob. :/
http://developer.android.com/sdk/index.html
http://developer.android.com/guide/developing/tools/adb.html
Its part of the android sdk. So if you don't already have the android sdk download that and installed it. Then locate the android sdk folded in programs. Once you located in there look for a folded called "tools" that's where adb located. What I do to make easier to do adb commands is I copy the "tools" folded to the root of my hard drive. Then to do the commands listed above open cmd then type cd c:\tools\ then you can type in the adb commands
Sent from my SAMSUNG-SGH-I897 using XDA App
@ Above
It says that ADB has moved.... in the tools folder
When I move the folder to the C root, i typed in C:\tools\ and it said that it wasn't recognized as a command
Check inside the tools folder make sure something called "adb.exe" is in there,that's the adb
Also after you typed cd c:\tools\
did you hit the ENTER key and then the adb command. Or did you do it in one go i.e "cd c\tools\ adb reboot download"
Cause you want to do it the first way I mentioned
Sent from my SAMSUNG-SGH-I897 using XDA App
Jon2fine said:
Check inside the tools folder make sure something called "adb.exe" is in there,that's the adb
Also after you typed cd c:\tools\
did you hit the ENTER key and then the adb command. Or did you do it in one go i.e "cd c\tools\ adb reboot download"
Cause you want to do it the first way I mentioned
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Error device not found
crap.
miahsoul said:
Error device not found
crap.
Click to expand...
Click to collapse
Did you have usb serving enabled?
Jig, jig, jig
Takes some, patience but it works
mcord11758 said:
Did you have usb serving enabled?
Jig, jig, jig
Takes some, patience but it works
Click to expand...
Click to collapse
On the phone? Yeah. Anyways, i'm going to radioshack in a sec. :X
Watch this video in the link below make sure your phone is properly in download when I only was able to get into recovery when I killed my phone.
http://www.youtube.com/watch?v=xdN_9BW1SsY&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I897 using XDA App
What were you doing when this happened? Just curiosity
mcord11758 said:
What were you doing when this happened? Just curiosity
Click to expand...
Click to collapse
Heh. I thought reflashing from gingerclone would be a cinch cause I flashed to gingerclone with no prior knowledge in like 20 minutes. Then I messed up the installation and somehow the files on the captivate ( i noticed this but ignored it) were still there somehow on even after flashing/deleteing stuff on one click odin. Like it was eclair again and everything was gone according to the phone and you could only see the files while mounted. I went through the normal process and then I guess somehow it wasn't stock Odin b/c of the leftover files and it simply froze when I used clockwork to flash. Actually it didn't flash correctly the first time (it failed) and I was in too much of a rush to heed it as a warning. Thus bricking my phone.
Moral - Don't rush and ignore tell tale signs of problems. :S
Did you go to radio shack

[Q] Error: device not found

I've searched all over the internet and found nothing but old, unhelpful articles. I currently can't get into download mode through any of the button and cord methods, so I've resorted to adb. However, my computer keeps saying error: device not found. I have the drivers installed, I've uninstalled and re-installed multiple times. usb debugging is on, usb storage is off. I've tried all ports. Nothing. Any ideas? My computer is a mac running windows 7 through boot camp, and am currently on boot camp
Update: Fixed through a program called PDAnet. If anyone has same issue, search for that and follow the instructions
Update Update: ADB is working, but reboot download just brings me to the powered off charging screen. Battery and cable download methods still don't work
Any ideas? bump
What were you going to get to this point?
A jig will get you into download mode.
studacris said:
What were you going to get to this point?
A jig will get you into download mode.
Click to expand...
Click to collapse
What do you mean? I want to try and save that as a final resort. I don't see why I would need one though. The system isn't broken, the rom boots fine, I can get into recovery mode and flash other things. I'm not bricked except for the fact download mode seems impossible to get into
F U swype I meant doing not going, what were you DOING before you couldn't get into dl mode?
Are you on cm7 or miui? If so, You can't use software to get into dl mode. You have to use button combos or a jig.
studacris said:
F U swype I meant doing not going, what were you DOING before you couldn't get into dl mode.
Are you on cm7 or miui? If so, You can't use software to get into dl mode. You have to use button combos or a jig.
Click to expand...
Click to collapse
I can get into both, I have both downloaded. I can't remember doing anything that changed this. I had issues with a cm7 kernel before so I successfully booted into download mode and flashed stock. That was only last thursday. I don't understand. It's most likely the computer?
So you're on stock?
No. I'm currently on MIUI but in recovery mode I can flash cm7 and miui
In miui you cant use software to boot dl mode. I'm guessing the flash to stock broke the button combo so a jig is the only way.
Are you sure? I've flashed stock multiple times. But never on this computer with windows 7. I just upgraded it to 7 and I've never been able to. As I said before though, adb is working
Sent from my I897 using XDA App
mikel.canovas said:
Are you sure? I've flashed stock multiple times. But never on this computer with windows 7. I just upgraded it to 7 and I've never been able to. As I said before though, adb is working
Sent from my I897 using XDA App
Click to expand...
Click to collapse
Did you use the x64 drivers instead if the x86 drivers on the win 7 machine?
I might not have... I'm not really sure. Could you post a link?
Sent from my I897 using XDA App
Here you go, 64 bit win7 drivers
http://www.mediafire.com/?3dh4d6up72me9re
I had x64 drivers. I remember in one article that a guy said not to use setup but something else?
I don't know about that. I do remember I had to pick the.exe file (next to last), right click and run as administrator.
Yeah that's the setup.exe
Right click and run as admin. Should start installing.if it says you already have then installed, reinstall anyway.
sorry ive already tried that multiple times
Last thing I know to try its to download kies, full version not mini.
Go to the samsung website, change location from usa to united kingdom and dl from there. Once kies is installed, under the Tools tab is an option to install drivers. Try installing those to see if they will work.
Nope. Even tried on a friends win 7 laptop and same issue. ADB works and it's recognized but no methods work for download mode

[GT-i9000]Can't get to boot menu, or use USB. Stock

Looking to root/new rom girlfriend's old phone, can't get it into recovery/boot menu.
I'm aware that the method is meant to be volume up, home button, power. I've watched videos of people doing it and read guides, pretty certain I'm doing it right.
I've done it keeping them held down the whole time (until Samsung galaxy screen cycles) and also releasing the buttons as soon as something comes up on the screen (as the youtube videos I've watched seem to do).
Have rooted my own phone and flashed several roms, so I'm moderately aware on this whole situation.
Running stock rom, I think Optus. Firmware 2.1-update1. So I think I need to update before rooting.
Download mode doesn't work either (volume down).
I also can't get it to appear on computer. Samsung Kies detects that the phone is plugged in but just keeps trying to initialise. I have downloaded Samsung Galaxy S x64 drivers from softpedia, tried to install driver that you can download as part of Android SDK. And hence, I have tried Android SDK but it isn't seen when I run 'adb devices'.
I set the USB mode on the phone accordingly. There actually was one point when the volumes were picked up on the computer, with USB mode as mass storage and debugging off, but it never happened again.
I've used two different usb cables, micro usb from Nook, new HTC cable.
Hope I've put through all the right information, really appreciate any help, this is getting frustrating.
Conradical314 said:
I set the USB mode on the phone accordingly. There actually was one point when the volumes were picked up on the computer, with USB mode as mass storage and debugging off, but it never happened again.
I've used two different usb cables, micro usb from Nook, new HTC cable.
Hope I've put through all the right information, really appreciate any help, this is getting frustrating.
Click to expand...
Click to collapse
You need to use an original Samsung USB cable or Huawei USB cable as most others will not work , for better reference visit your wiki http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series as how to enter download mode
for USB problems and solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
thanks for the reply. The USB mounting is now working on another computer, the drivers must be confused on my desktop.
Surely micro USB cables are mostly electronically identical?
Currently trying to install 'Kies' on netbook... maybe that will work.
Reckon the boot to recovery command from Android SDK is my best bet?
Thanks for the wiki link, I hadn't come across that
Conradical314 said:
Surely micro USB cables are mostly electronically identical?
Currently trying to install 'Kies' on netbook... maybe that will work.
Reckon the boot to recovery command from Android SDK is my best bet?
Thanks for the wiki link, I hadn't come across that
Click to expand...
Click to collapse
Pin outs on micro USB cable varies and most differ from samsungs, have tested them ...laptop do function better when it comes to flashing Samsung phones , you can download Andro platina from My android collections link below for recovery or download mode
Ok, I will have a Samsung cord later. If Android SDK stuff doesn't work I'll take a look at the tools you linked. Nice collection.
hmmm got the cable, and android SDK picks it up now, "adb devices" returned an item for the phone, and adb reboot recovery and download worked.
Went on with the directions here: [can't post url, but the cyanogen mod Galaxy S full update guide], got to the end of "Installing the ClockworkMod Recovery". On running point 6, phone just loops the Galaxy boot screen.
Guess I'm gonna be looking at more of these tools, and hoping that some can operate while it's booting....
because the button commands for recovery and download modes don't work.
well ..... looks like I'm doing the usb resistor jig to try to get into download mode
Conradical314 said:
well ..... looks like I'm doing the usb resistor jig to try to get into download mode
Click to expand...
Click to collapse
Try pulling out battery, than pressing power for a min, remove sim and ext SD card, before trying again for download mode...look at Quick Fixes and Solutions link below, as IF you are flashing ICS from GB, you may need to flash it twice
Conradical314 said:
hmmm got the cable, and android SDK picks it up now, "adb devices" returned an item for the phone, and adb reboot recovery and download worked.
Went on with the directions here: [can't post url, but the cyanogen mod Galaxy S full update guide], got to the end of "Installing the ClockworkMod Recovery". On running point 6, phone just loops the Galaxy boot screen.
Guess I'm gonna be looking at more of these tools, and hoping that some can operate while it's booting....
because the button commands for recovery and download modes don't work.
well ..... looks like I'm doing the usb resistor jig to try to get into download mode
Click to expand...
Click to collapse
i had the same problem as you! but i had 3bottons combo working, so i entered recovery and it was a new cwm(5.x.x.x) wiped data/factory reset and cache, flashed cm7 againg and then it worked. here on the forum there was a guide to get the 3 bottons combo work but i cannot find it anymore. I hope jig will help you, also if you want CM7 ask to someone more experienced then me to buil odin file for it! so you can flash it with jig!
ok I have the usb jig working. I'm pretty sure that I do have CWM installed, I just can't get into recovery mode, only download mode.
I'm a bit unsure where to go from here. I think it's Odin, but I don't know what version to use. I want to use the most up to date method possible, that's why I'm trying to use the established Cyanogen Mod guide, but now that I'm using a workaround it doesn't apply to me I guess.
I'm going to be trying to get the right version of Odin and find a guide for it (probably from your tools xsenman, thanks) but if anyone would like to tell me precisely what I should do I would appreciate the peace of mind
.... far out these recaptchas are difficult. Can't wait till I'm proper member :S
Can I use Heimdall to boot my phone into recovery mode?
EDIT:
Pretty sure I can't do that now. I've had a look through the heimdall commands now (ie read the help text from the command line). So far I'm looking for something that I can use with the flash command, to either get me back running factory, or allowing me to get into recovery mode.
http://forum.xda-developers.com/showthread.php?t=821698 this was promising, to use Heimdall to get back the 3-button recovery mode, but the links are dead.
Conradical314 said:
ok I have the usb jig working. I'm pretty sure that I do have CWM installed, I just can't get into recovery mode, only download mode.
I'm a bit unsure where to go from here. I think it's Odin, but I don't know what version to use. I want to use the most up to date method possible, that's why I'm trying to use the established Cyanogen Mod guide, but now that I'm using a workaround it doesn't apply to me I guess.
I'm going to be trying to get the right version of Odin and find a guide for it (probably from your tools xsenman, thanks) but if anyone would like to tell me precisely what I should do I would appreciate the peace of mind
.... far out these recaptchas are difficult. Can't wait till I'm proper member :S
Click to expand...
Click to collapse
You can use any Odin, look under Recovery kits on My android collections for guides and kits that will get you to a working Gingerbread 2.3.6, You need to do this before you try for CM and Quick Fixes and Solutions link below have guides for Recovery and Download mode problems
Nope heimdall is a flashing tool, view Quick Fixes and solutions for recovery options
links no longer exist for the stuff on the "i9000 EzBase Rescue and Recovery Full Graphical HOW To and Tutorial download" guide
Conradical314 said:
links no longer exist for the stuff on the "i9000 EzBase Rescue and Recovery Full Graphical HOW To and Tutorial download" guide
Click to expand...
Click to collapse
http://nfye.eu/EZbase/i9000/EZbase-2.00.pdf
xsenman said:
http://nfye.eu/EZbase/i9000/EZbase-2.00.pdf
Click to expand...
Click to collapse
yeah but... the links inside. I'm not game to just try to download files that I think are the same
now something seems to have broken the tenuous driver situation I had going on. I got the files for EzOdin in your guides, but it doesn't pick up the phone. Neither does heimdall, even though it used to
alright, I'm done!
In the end, here were my problems:
Flashing Clockwork Mod 'bricked' the phone putting it into a boot loop. This was because I was meant to be on 2.3, but I was on 2.1 (I think).
I couldn't easily escape boot loop, because this version of the Galaxy S didn't have the 3 button method to enter recovery or download mode. This is somewhat common, especially in Australia from what I've seen. I had to enter into download mode by using the usb jig where you connect a 301k ohm resistor between pins 4 and 5 of the usb port.
It took me a loooong time to progress from here, but I think the main cause of this was usb drivers. I think for most people it will be plug and play though. The thing that got me there in the end was the right combination of uninstalling, and using the driver tool with the Heimdall suite.
I ended up having to install another rom via another method, to give me access to recovery mode, so that I could then install CM 9.1. I used http://forum.xda-developers.com/showthread.php?t=991792, and had to get the files from ,https://www.dropbox.com/s/d382m2kyorzum16/ezbase recovery kit gb.zip (hopefully that's still up for future readers)
Then from download mode again, I had to redo the kernel flash using Heimdall, as described http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S:_Full_Update_Guide.
I had problems here where I thought I was on clockwork mod but wasn't, and hence the packages were read as invalid (I guess it was expecting a Samsung/Optus one). But with that kernel flash, now that I was [*actually*] on Clockwork Mod, the Cyanogen Mod zip was recognised properly and it installed
Hope this helps future readers, and thanks for the help.

Categories

Resources