Hi all
This problem that I have is pissing me off so much. I rooted my phone and then unrooted it, and then my Android Market icon was missing. Now, whenever I want to do a factory reset, the phone goes back to ClockworkMod Recovery every single time. I want to get rid of this CMR. Also, I've tried to stock original rom on my phone but it does not work at all. What is happening? My phone is LG Optimus 2x P990. But I always get this error where I can't apply the DLL file. This really annoying me right now. I've tried everything and NOTHING works. I regret rooting my device.
Please help me thanksss
Lena
Here's howto remove the ClockWork Recovery Mode:
http://forum.xda-developers.com/showthread.php?t=1021554
You can flash the original image using SmartFlash.
Get your original Firmware image from here. The instructions for SmartFlash are here
how to flash the zip
sorry I am completely new to this. How do I apply the zip? Do I boot into recovery mode and install zip from there? I have done this with other zip files before and it always ended with:
'installation aborted'
im trying it now, but its stuck at:
'Restoring stock recovery image'
smart flash
smart flash doesn't work for me. I always get this time out error.. I really don't know what to do now. The recovery stock file did install but then I chose 'reboot system now' in CWM and it got stuck with the LG logo. Now, it's back to ClockWork Recovery Mod again!! i don't understand. Please help.. Many thnks
what type of error?
your device-manager on your pc recognizes your 2x, when you connect it as described in the instructions?
THis is the error:
00:00.0 Sec ownload Start...
00:07.5 Sec :We can't communicate with specific port
and now, I can't start my phone. It gets stuck on LG logo. I tried the remove CWM method, it worked but when I rebooted my phone, my phone would not start at all. P. Please help.
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Does the COM port get detected automatically when you plugin the phone ?
pinkdiva said:
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Click to expand...
Click to collapse
Same with me. Go on trying at some point it will work. It happens with me everytime i flash with smartflash. Myself also waiting for a definite solution to this problem. i think the problem lies with usb drivers. I also tried with taking out card and sim but cannot pinpoint the problem. Any successful flasher may upload the drivers. Moreover i also disabled programmes like antivirus etc running in background. Waiting for a more definite problemfree flashing solution.
I think, install drivers to smartflash, no other drivers, and later smartflash.
Enviado desde mi Optimus 2X usando Tapatalk
Related
Dear All,
First i installed cwm recovery from this thread http://forum.xda-developers.com/showthread.php?t=1007863
, it was success but can't do nand backup, so i use rom manager and installed cwm recovery from there and success.
after that i choice boot into cwm recovery from rom manager, phone was restart but stuck in LG logo.
i tried to take out take in the batre and do normal boot on the result is same "stuck in lg logo"
i also tried to enter to cwm recovery by press power + vol down but still same stuck in lg logo
would you please help me ?
Are you holding your fingers on both power and vol down button for long enough? It can take up to 5-6 seconds to enter the CWM
Kickasskev said:
Are you holding your fingers on both power and vol down button for long enough? It can take up to 5-6 seconds to enter the CWM
Click to expand...
Click to collapse
yes, i already tried more than 2 minutes still no enter.
also i already tried smartflash method same problem, there's no driver response
looks like hang in lg logo
Try uninstalling all lg drivers associated with the phone, restart computer then reinstalling all the smartflash drivers then retry
Sent from my LG-P990 using XDA App
Ohh no, Seems like I have the same problem
Ohh no.. Seems like I have the same problem.. The phone is stuck on the LG logo.
I installed the Cyanogen mod successfully, and everything seemed to work.
Then i started Rom manager to install Clockwork recovery. The clockwork mod was stuck the first time, don't know why!
So I restarted the phone, and tried installing the clockwork mod again, this time there were no problems.
After the clockwork mod was installed I wanted to install the Google addons, so I went to Download ROM, and pushed Google Addons. The phone asked for a restart, and during the restart I was stuck on LG logo.
I would be very very happy if anyone can help me?
Hi, i think you must use the nvflash reset-all-phone procedure.
Search google for "NVflash stock ROM release" and you'll find the procedure and the download links for APX drivers and zip with rom images and tools.
Good luck ! (I made the procedure 10 times in 3 days past bricking my phone..)
boezio said:
Hi, i think you must use the nvflash reset-all-phone procedure.
Search google for "NVflash stock ROM release" and you'll find the procedure and the download links for APX drivers and zip with rom images and tools.
Good luck ! (I made the procedure 10 times in 3 days past bricking my phone..)
Click to expand...
Click to collapse
Thank you very much, I succeeded in doing a flash through nvflash, so now my phone works great again
Do you know if you can destroy the nvflash possibly? .. just so I know if I play with the phone as much as I want, and always get it working again with nvflash if something goes wrong
Sent from my LG-P990 using XDA App
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
the 200 dpi setting does not work on the Thrill, which is why you are stuck in "bootloop"
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Well looks like you're kinda screwed since you don't have clockwork installed, I'm not sure if you can install a new ROM... but have you tried EVERYTHING in android recovery?
If you don't know how to get to recovery... it's Hold down volume key + 3d + power, until it vibrates then use arrow keys to move around and 3d to select if you dont have clockwork...
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Do you havet the emergency mode like most LG smartphones?Here is how you check pull out the battery and the plug it in(so your phone turns off) and then hold down the volume up +voulume down and power button if it worked you should see a yellow screen and a "Emergency mode!!" title.Then google for a kdz update tool and a kdz firmware for YOUR phone.You will also need the LG mobile united drivers.If you are on windows go to control panel and disable the lg modem.Then connect your phone(in emergency mode) to the computer open the update tool then click on select KDZ and navigate to your KDZ then in phone mode select emergency_something iys the only one.Than click flash KDZ and after about 5min your phone should reboot and it wilk work.Its importiant to note that you will lose everything on your phones memory its like you flash a rom you start out fresh you also loose root.Good luck!
Sent from my LG-P350 using XDA premium
faresr said:
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
About the ADB it shows "device not found" because you didn't enable usb debugging.
Sent from my LG-P350 using XDA premium
Your gonna need to flash the .bin file for the thill
Thrill 4g on O3D
https://rapidshare.com/#!download|2...391931|R~E48599C3AAD1D44505C904C6E6A52A13|0|0
Thrill 4g on O3D
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
hoskopico said:
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
Click to expand...
Click to collapse
Ok thx I didn't know that it was different sorry if i made any confusion
Sent from my LG-P350 using XDA premium
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Try the installing gingerbread and back to stock thread i think its in the mediafire download on there
Thrill 4g on O3D
I don't think i have the emergency download mode... I tried the button combination but it didn't work... so I still can't get my computer to recognize my phone to do anything...
Or try flashing a kdz for p920 then do the bin flash to get it back to stock froyo cuz you have to install the driver with phone pluged in and recognized
Thrill 4g on O3D
hoskopico said:
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Click to expand...
Click to collapse
I know what you mean LG doesn't really care about mine device too.It's like they are nice untill you buy their phone.After that they don't care.
Sent from my LG-P350 using XDA premium
http://www.danasoft.com/ sig/****yeah287168.jpg
faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
tbcxfallen said:
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
Click to expand...
Click to collapse
You don't have clockwork then.That is your stock recovery.I had this problem too.I flashed the wrong recovery and i got stuck on the LG logo.I fixed it using fastboot flasher idk is it the same combination but on my phone it is volume up+call+power button.Uf it is correct you should see a sign saying fastboot mode udc_start or something like that then use the fastboot flasher to flash a recovery image for your phone.After the flash is complete reboot your phone but first do a NORMAL boot so you can see if the problem is solved.If it worked then you can safely boot into recovery.
Sent from my LG-P350 using XDA premium
Thank you for your support guys, but as it was to difficult, I just got a new one from at&t
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
cwburns32 said:
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
Click to expand...
Click to collapse
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
nerot said:
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
Click to expand...
Click to collapse
I rooted phone, everything fine. I flashed CWM, everything fine. When I rebooted system from CWM then phone booted but hung at the LG logo. Now only thing I can do is boot into recovery or boot to the LG logo for hours... Don't even know how this could have happened as I haven't flashed anything, just root and CWM...
Recently i installed Rom Manger from CWM and i also replaced my stock recovery with CWM recovery, when i boot into recovery now it shows an error says "Error : Boot image Signature" And the Phone goes off, phone is runnif now but i can't boot into recovery , anyone please help me to uninstall CWM RECOVERY And replace the stock
ruznik said:
Recently i installed Rom Manger from CWM and i also replaced my stock recovery with CWM recovery, when i boot into recovery now it shows an error says "Error : Boot image Signature" And the Phone goes off, phone is runnif now but i can't boot into recovery , anyone please help me to uninstall CWM RECOVERY And replace the stock
Click to expand...
Click to collapse
You really need to search and read. As per the XDA Forum Rules
1. Search before posting.
Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news.
Click to expand...
Click to collapse
You are far, far from the first person to ask that question so please put some effort in and search first, rather than simply expecting people to repeat the same instructions for the 100th time.
i searched every inch of this site for O4x recovery flash
SimonTS said:
You really need to search and read. As per the XDA Forum Rules
You are far, far from the first person to ask that question so please put some effort in and search first, rather than simply expecting people to repeat the same instructions for the 100th time.
Click to expand...
Click to collapse
some one says that they don't test it on O4x , can you please post the link here if you know ,sorry for breaking the rule
ruznik said:
Recently i installed Rom Manger from CWM and i also replaced my stock recovery with CWM recovery, when i boot into recovery now it shows an error says "Error : Boot image Signature" And the Phone goes off, phone is runnif now but i can't boot into recovery , anyone please help me to uninstall CWM RECOVERY And replace the stock
Click to expand...
Click to collapse
error boot image signature means the bootloader is locked. so u didnt install the recovery and so thats why u cant go in recovery. u just deleted the stock recovery by mistake. now u either go ahead and try unlock , flash recovery and install new rom if u want to go away from stock rom, or use kdz to restore.
<<EDIT>> i dont understand that o4x. i just told you whats ur situation there. now use search and find the solution
Hi there,
I was recently put in the same situation, i.e. I installed ROM Manager and then ClockworkMod. When I open ROM Manager --> Recovery Setup --> Install or Update Recovery --> Click on "ClockworkMod Recovery" --> I get "Error while downloading from server. Please make sure that you have a stable internet connection and that your SD card is inserted and have free space!". I have made sure that I have both, therefore I do not understand why I get this error. When I select "Reboot into recovery" in ROM Manager my phone restarts and then I get the same error as ruznik.
When I try to boot into recovery manually, i.e. switch off phone, Volume UP (or DOWN) + Power button, I get the same error as ruznik. However, my phone boots normally which is always a relief.
I uninstalled ROM Manager and tried to boot into recovery and I got the same error as ruznik. Then I installed back ROM Manager and in the Recovery set up there is already "ClockworkMod recovery", which probably means that ClockworkMod was not uninstalled when I uninstalled ROM Manager.
I have rooted my LG P880, but I believe I have not unlocked the bootloader (I suspect that CWM + bootloader not unlocked is what is causing the error with booting into recovery?). I say I believe, because I did the rooting some time ago and I do not remember if I have unlocked the bootloader as well.
I would like to uninstall CMW. However, I understand that this is not a very easy thing, therefore I would be happy to reflash my EUR-XXX Jelly Bean 4.1.2, root and then unlock the bootloader. However, although I have properly installed the drivers (as this is not the first time I will flash the EUR-XXX), my phone does not connect to my PC, although it charges from the PC. I have tried with two different cables, I have enabled debugging, I have Media Sync enabled (I tried also the option LG software as I have LG PC suite installed), I have tried to connect it to different ports, I have tried to connect it to different PCs, but still nothing. Note that this is happening only with my LG P880, because I can connect properly my Iphone 4S to all 3 PCs. Also, when I open my LG PC suite, I cannot connect the mobile phone to the LG PC suite via cable, but I can connect it via Wifi connection.
I am a bit reluctant to unlock the bootloader, e.g.
youtubedotcomslashwatch?v=sBeirPeT2rQ
youtubedotcomslashwatch?v=iqEop-ThNug
because I do not want to brick my working phone when I cannot connect it to my PC so that I can flash it (sorry for the broken links - I am not allowed to post links because I am new to XDA). Therefore, I have two questions:
1) Is there anything I can do to connect my phone to a PC? I believe that everything went wrong after I installed ROM Manager and then CWM via ROM Manager.
2) Is it safe to unlock the bootloader while the phone is in the current state? I am not sure if the phone will restart and then will not be able to turn on again because it will be bricked? And since I have not managed to connect my phone to a PC, I am not sure how I will be able to flash the software?
Apologies for long email - I tried to be as descriptive as I can. Thank you in advance for any suggestions.
Hi I tried to install CWM recovery and my bootloader was unlocked i'm sure. But after reboot it stucks in boot animation!!! So that i haven't access to recovery and unfortunately when I try to put phone into S/W mode a white and black striped screen comes up and in this mode every KDZ flasher says that can't find phone or it's not connected!!:crying::crying::crying: What can I do??? I'm really scared!!! Please help!!!!:crying::crying::crying:
My current Rom is Hong kong 4.1.2
nobody's here?
fifali190 said:
Hi I tried to install CWM recovery and my bootloader was unlocked i'm sure. But after reboot it stucks in boot animation!!! So that i haven't access to recovery and unfortunately when I try to put phone into S/W mode a white and black striped screen comes up and in this mode every KDZ flasher says that can't find phone or it's not connected!!:crying::crying::crying: What can I do??? I'm really scared!!! Please help!!!!:crying::crying::crying:
My current Rom is Hong kong 4.1.2
Click to expand...
Click to collapse
nobody's here? please help!! I'm really in problem!!!
is fastboot working?
which cwm and which method did you use to install cwm?
How much battery did you have in the phone when you did this?
Rudjgaard said:
is fastboot working?
which cwm and which method did you use to install cwm?
How much battery did you have in the phone when you did this?
Click to expand...
Click to collapse
honestly i don't know how to use fastboot in this condition.i installed cwm touch recovery version 6.0.1 (i'm not sure for version) with an app named LG 4X Recovery app from here: http://forum.xda-developers.com/showthread.php?t=1826378 and the battery was full
Why would you use something from a thread dated 2012?!?
download recent twrp or cwm img
go into bl and flash manually -> fastboot flash recovery recovery.img
sorry
Rudjgaard said:
Why would you use something from a thread dated 2012?!?
download recent twrp or cwm img
go into bl and flash manually -> fastboot flash recovery recovery.img
Click to expand...
Click to collapse
sorry my friend can you explain it step by step from zero for a beginner?? I need help really!! please!!
Same issue with my P880
fifali190 said:
sorry my friend can you explain it step by step from zero for a beginner?? I need help really!! please!!
Click to expand...
Click to collapse
Hi.
I did the same thing today. I installed that application " LG-Optimus-4XHD-Recovery-v1.1.apk "
I have selected ClockworkMod Custom Recovery.
It showed that Operation is successful.
than i clicked on "Boot Recovery" to restart my Phone in CloclworkMod Custom Recovery.
since then I am getting only Starting animation. (LG LOGO).
nothing happens.
My battery was full when i performed this procedure.
Please help me
Shrikantbhole90 said:
Hi.
I did the same thing today. I installed that application " LG-Optimus-4XHD-Recovery-v1.1.apk "
I have selected ClockworkMod Custom Recovery.
It showed that Operation is successful.
than i clicked on "Boot Recovery" to restart my Phone in CloclworkMod Custom Recovery.
since then I am getting only Starting animation. (LG LOGO).
nothing happens.
My battery was full when i performed this procedure.
Please help me.
Personal ID: [email protected]
contact : 9987575516 (Mumbai)
Click to expand...
Click to collapse
any help please,i have the same problem
Solution
Above post is mine.
I was stuck at LG Logo for 2 whole days.
You have to flash your phone.
I flashed my phone with same v20a (4.1.2 JB) firmware.
now its working absolutely fine.
Download LG Flash tool
Download Firmware.
pull battery out, Put it back in,
hold VOL- and Connect usb cable
then your phone will be in S\W mode.
then run Flash tool and select Firmware file,
and flash it.
your phone will restart automatically, then pull out cable and let it start on its own.
DONE.!
for LG Flash tool and Original V20A firmwares google and search.
as I am new member I am not allowed to post links or else i would have posted all the new links.
Its easy, all the best..!
so no hope for me?
can't flash KDZ, it just dosen't work, or freezes, or app stop responding and force-closes, when flashing by flashtool it errors after 17 sec...
any ideas?
LG service center
Hi again friends.Unfortunately I'm going to use lg service center and show phone to them:crying:.What should I say to them?Can I use warranty?Do they realise I rooted my phone and my warranty voided?And finally if warranty doesn't support it, how much it costs to repair?
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
ShahX said:
Hello Guys!
I got Samsung Galaxy S Captivate and I've been using my phone since 2 years perfectly no problem but last week my phone suddenly stop working I was using HELLYBEAN on my captivate and it was working fine but then my phone stopped working and after that whenever I tried to install different Rom it was saying "Installation Aborted" after getting same errors with different roms, I decided to go back to Stock and everything went successful but after I tired to power on my phone it kept going to recovery mode and it was saying "E:failed to mount /sdcard" but after few time restarting my phone, I made it to the AT&T logo but unfortunately my phone kept on restarting after AT&T logo, so to get rid of that I tired to follow this steps from this website and actually lost my phone completely NOW!
http://blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
I tried to install .Tar with Odin but failed and After that I lost my phone completely and my phone started saying "Firmware Upgrade fail Try using recovery mode" Can someone help me with this please and I'm not able to get into download mode NOW! whenever I try to get into download mode and plug USB cable with holding the Volume + and - my phone shows the same error and can't get into download or recovery mode can someone PLEASE Help me! Please! I really want my phone back! :crying:
Here is the Error which I'm getting whenever I try to get into Download mode or plug USB cable *Attachment*
Thank You
Looking forward to kind replies!
Click to expand...
Click to collapse
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
BWolf56 said:
The imaged you linked is considered a download mode, you should be able to flash from it.
That being said, the error you got often means your internal memory is dead. Which also means that you can't get what was on it (Think of it as a hard drive that just died). Your best bet after trying to flash stock would be to partition an SD card and run from it (there's a guide on how to do it on here).
Click to expand...
Click to collapse
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
ShahX said:
Thanks for your reply bro, but the thing is My Computer don't detect my phone neither my phone appears on my computer! Not even with Odin I tried but Failed Anyway to Flash back to any other ROM just to get my phone working! Please?
Thank You.
Click to expand...
Click to collapse
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Amazing Reply! but Still need help
BWolf56 said:
Try reinstalling your drivers to get your phone connected.
But I'm pretty sure you'll have to partition an SD card. Your internal memory sounds dead.
Click to expand...
Click to collapse
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
ShahX said:
thankyou bro for an amazing reply! I actually worked it out my computer detected my phone even Odin did, but can you please tell me what to do next? like How do I flash my phone back to stock rom or get into the CWM boot loader cuz whenever I try to get into recovery or press any key or connect my cable my phone automatically gets into that same screen the one I showed you above! Please bro help, it's been ages since I haven't used my phone..
Thank You!
Click to expand...
Click to collapse
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Almost Done
BWolf56 said:
You gotta do some basic research. Here's the stock ROM (without bootloaders): http://www.mediafire.com/download/w..., NO Bootloaders, Re-partition, Full Wipe.zip
Just loat it up on Odin and flash away. You can't get in recovery cause your phone can't load anything atm, it needs a clean flash. Just make sure nothing interrupts Odin while it's flashing.
Click to expand...
Click to collapse
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
ShahX said:
Thanks for your kind reply again bro, I did everything as you said but unfortunately my Odin got stuck on zImage but the phone was showing blue line under written "loading" basically it was stuck at one point and wasn't moving forward so I disconnected my phone and tried to connect again but nothing showed up so I tired to get into download mode and fortunately I GOT into the download mode the one I used to get when my phone was working "Yellow with Andriod Logo" so after getting into download mode I tired to flash the stock Rom the one you gave me but got can't get through it got stuck on factoryfs.rfs? or should I give it more time, it's been 10 mins already...Any Help?
thankyou sooo much for your help
Click to expand...
Click to collapse
You can give Heimdall a shot (note that it will install its own drivers on the usb port you'll use it on so Odin won't work on it): http://www.mediafire.com/download/5..., NO Bootloaders, Wipe-Heimdall One-Click.zip
If that doesn't work, I can say at like 95% that your internal memory is dead and you'll have to partition an SD card if you wanna get it running. There are guides on how to do it on here.
I've seen that image often. Uninstalling then re-installing the usb drivers for Samsung helped me. Flashing a captivate can be a little convoluted granted all the different methods of acquiring root and flashing a rom that's been used through the years ... and subsequently posted somewhere on the internet. I'd suggest the following .... once your device is recognized in Odin.
1. Flash I897UCKK4 with Odin (no root) for gingerbread stock rom
2. Download and install KK4root. Run Kk4 root "run" exe in the kk4_root folder. Corn kernel is installed with modded recovery system
3. From Corn kernel recovery click "root extras" to get su and busy box installed