Dear All,
First i installed cwm recovery from this thread http://forum.xda-developers.com/showthread.php?t=1007863
, it was success but can't do nand backup, so i use rom manager and installed cwm recovery from there and success.
after that i choice boot into cwm recovery from rom manager, phone was restart but stuck in LG logo.
i tried to take out take in the batre and do normal boot on the result is same "stuck in lg logo"
i also tried to enter to cwm recovery by press power + vol down but still same stuck in lg logo
would you please help me ?
Are you holding your fingers on both power and vol down button for long enough? It can take up to 5-6 seconds to enter the CWM
Kickasskev said:
Are you holding your fingers on both power and vol down button for long enough? It can take up to 5-6 seconds to enter the CWM
Click to expand...
Click to collapse
yes, i already tried more than 2 minutes still no enter.
also i already tried smartflash method same problem, there's no driver response
looks like hang in lg logo
Try uninstalling all lg drivers associated with the phone, restart computer then reinstalling all the smartflash drivers then retry
Sent from my LG-P990 using XDA App
Ohh no, Seems like I have the same problem
Ohh no.. Seems like I have the same problem.. The phone is stuck on the LG logo.
I installed the Cyanogen mod successfully, and everything seemed to work.
Then i started Rom manager to install Clockwork recovery. The clockwork mod was stuck the first time, don't know why!
So I restarted the phone, and tried installing the clockwork mod again, this time there were no problems.
After the clockwork mod was installed I wanted to install the Google addons, so I went to Download ROM, and pushed Google Addons. The phone asked for a restart, and during the restart I was stuck on LG logo.
I would be very very happy if anyone can help me?
Hi, i think you must use the nvflash reset-all-phone procedure.
Search google for "NVflash stock ROM release" and you'll find the procedure and the download links for APX drivers and zip with rom images and tools.
Good luck ! (I made the procedure 10 times in 3 days past bricking my phone..)
boezio said:
Hi, i think you must use the nvflash reset-all-phone procedure.
Search google for "NVflash stock ROM release" and you'll find the procedure and the download links for APX drivers and zip with rom images and tools.
Good luck ! (I made the procedure 10 times in 3 days past bricking my phone..)
Click to expand...
Click to collapse
Thank you very much, I succeeded in doing a flash through nvflash, so now my phone works great again
Do you know if you can destroy the nvflash possibly? .. just so I know if I play with the phone as much as I want, and always get it working again with nvflash if something goes wrong
Sent from my LG-P990 using XDA App
Related
Hi all
This problem that I have is pissing me off so much. I rooted my phone and then unrooted it, and then my Android Market icon was missing. Now, whenever I want to do a factory reset, the phone goes back to ClockworkMod Recovery every single time. I want to get rid of this CMR. Also, I've tried to stock original rom on my phone but it does not work at all. What is happening? My phone is LG Optimus 2x P990. But I always get this error where I can't apply the DLL file. This really annoying me right now. I've tried everything and NOTHING works. I regret rooting my device.
Please help me thanksss
Lena
Here's howto remove the ClockWork Recovery Mode:
http://forum.xda-developers.com/showthread.php?t=1021554
You can flash the original image using SmartFlash.
Get your original Firmware image from here. The instructions for SmartFlash are here
how to flash the zip
sorry I am completely new to this. How do I apply the zip? Do I boot into recovery mode and install zip from there? I have done this with other zip files before and it always ended with:
'installation aborted'
im trying it now, but its stuck at:
'Restoring stock recovery image'
smart flash
smart flash doesn't work for me. I always get this time out error.. I really don't know what to do now. The recovery stock file did install but then I chose 'reboot system now' in CWM and it got stuck with the LG logo. Now, it's back to ClockWork Recovery Mod again!! i don't understand. Please help.. Many thnks
what type of error?
your device-manager on your pc recognizes your 2x, when you connect it as described in the instructions?
THis is the error:
00:00.0 Sec ownload Start...
00:07.5 Sec :We can't communicate with specific port
and now, I can't start my phone. It gets stuck on LG logo. I tried the remove CWM method, it worked but when I rebooted my phone, my phone would not start at all. P. Please help.
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Does the COM port get detected automatically when you plugin the phone ?
pinkdiva said:
yep it recognises it but it always gets this time out error... what should I do? Please help.. Many thanxx
Click to expand...
Click to collapse
Same with me. Go on trying at some point it will work. It happens with me everytime i flash with smartflash. Myself also waiting for a definite solution to this problem. i think the problem lies with usb drivers. I also tried with taking out card and sim but cannot pinpoint the problem. Any successful flasher may upload the drivers. Moreover i also disabled programmes like antivirus etc running in background. Waiting for a more definite problemfree flashing solution.
I think, install drivers to smartflash, no other drivers, and later smartflash.
Enviado desde mi Optimus 2X usando Tapatalk
hi guys im running on gingerbread 2.3.4 V20E and i cant root my device. iv tried unlock root, gingerbreak superone click but doesn't work. also i gave tried blackjack v1.2 but i didnt get proper root access. HELP! thanks for reading!
ashvinfroyo said:
hi guys im running on gingerbread 2.3.4 V20E and i cant root my device. iv tried unlock root, gingerbreak superone click but doesn't work. also i gave tried blackjack v1.2 but i didnt get proper root access. HELP! thanks for reading!
Click to expand...
Click to collapse
No exploit will work... LG fixed that.. damn lg
Anyways why did not you search before, there are a no of threads regarding rooting.
Use cwm injection method and flash your rom again. http://forum.xda-developers.com/showthread.php?t=1512203
By the way you should try other custom roms here as well rather than stock.
A future reference and best rooting technique http://tinyurl.com/6t9vm27:thumbup:
Sent from my LG-P970 using XDA
First of all, since you're new to this board please read the Welcome To The LG Optimus Black Section..... (Please Read If You're New)
Also, read the [HOW TO]The Big N00B how-to! since it will answer most of your questions.
Second, if you would have searched you would have found your answer already, but i'll help you (i'm in a good mood today too ).
You can find an already rooted v20E firmware HERE.
Just follow the steps from THIS post but instead of using the V20B firmware files use the ones from the V20E firmware (i've already given the link to the V20E above).
Good luck and happy modding
Can't wipe data/factory reset
hello i just flashed my optimus black with smartflash as instructed i boot into recovery but however when i select wipe data there is no "yes" option to select i can only select no! HELP
Are you on cwm touch??? If you are, then yes option will be below the no. Scroll down with your volume rocker...
Sent from my LG-P970 using XDA
wow it worked!
thanks man it worked! many thanks!
ashvinfroyo said:
thanks man it worked! many thanks!
Click to expand...
Click to collapse
You are welcome ... by the way touch scrolling is also available... :-D
Sent from my LG-P970 using XDA
Smartflashtool has stopped working
Hi, my OB also has v20E firmware installed by default. I 've tried to root the phone by using smartflashtool method that has already been described above. However, whenever I tried to root my device, it always ended up in failures. The smartflashtool program either showed "Timeout error is occurred" (sometimes) up or "Smartflashtool MFC has stopped working" (most of the times) at various points in the rooting progress
I used all of the programs mentioned on the posts above but still no luck
- Installed LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0
- Installed LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0
- Installed LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6
- [patched]V20E_SEA.bin
- V20e_SEA.fls
And currently, my phone cannot boot into the main phone screen (it can only display LG logo at best). Please help!
b3aver said:
Hi, my OB also has v20E firmware installed by default. I 've tried to root the phone by using smartflashtool method that has already been described above. However, whenever I tried to root my device, it always ended up in failures. The smartflashtool program either showed "Timeout error is occurred" (sometimes) up or "Smartflashtool MFC has stopped working" (most of the times) at various points in the rooting progress
I used all of the programs mentioned on the posts above but still no luck
- Installed LGSmartPhone_ModemlinkDUNDrive_WHQL_ML_Ver_1.0
- Installed LGWindowsMobile_USBDriver_WHQL_ML_Ver_1.0
- Installed LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6
- [patched]V20E_SEA.bin
- V20e_SEA.fls
And currently, my phone cannot boot into the main phone screen (it can only display LG logo at best). Please help!
Click to expand...
Click to collapse
hi,
sure, you haven't root your device !
phone will reboot recovery
13. Wipe all data/factiry reset
14. flash Superuser.zip " for root device
15. Reboot system now
superuser.zip download : http://www.mediafire.com/?a1re78800owv3aj Flash with cmw touch in recovery
run smartflashtool with rights administrator also...
use this patched rom => http://forum.xda-developers.com/showpost.php?p=23833005&postcount=186
YkZ_1967 said:
hi,
sure, you haven't root your device !
phone will reboot recovery
13. Wipe all data/factiry reset
14. flash Superuser.zip " for root device
15. Reboot system now
Hi, thanks for your reply. Unfortunately, I haven't gotten to the point where the phone was rooted successfully (100%), whenever I tried to run B_SmartFlashTool_Extern.exe, it always ended up in error. What did I do wrong? I've used the appropriate files and installer, haven't I? Now, I'm totally freaked out because my phone has run out of battery and doesn't show any sign of charging even though I've connected the charger
Oh by the way, I've already used the patch rom for V20e, but still no avail and already tried running the program with admin rights
Click to expand...
Click to collapse
are you able to enter in S/W update mode now ?
key volume + and usb plugged
or use r&dtt method => http://forum.xda-developers.com/showthread.php?t=1111771
Ok, I'm totally freaked out now. I can't even start the S/W update mode anymore although I've been charging the phone for about 15 minutes. No, I don't know how to use r&dtt method, tried to read the post but I don't which one is r&dtt method. Can you help me? I've checked the charger and it felt warm after 15 minutes of charging though
b3aver said:
Ok, I'm totally freaked out now. I can't even start the S/W update mode anymore although I've been charging the phone for about 15 minutes. No, I don't know how to use r&dtt method, tried to read the post but I don't which one is r&dtt method. Can you help me? I've checked the charger and it felt warm after 15 minutes of charging though
Click to expand...
Click to collapse
remove the battery and leave five minutes without
phone must be on power off
plug usb cable and press volume keys+
say me if the phone can be enter in S/W update mode, i' m watching for LGFlashTool.exe, never used again, always unbrick my Ob with smartflash tools method
Question about root
Hi, I just root rights to V20O not only to root recovery, how to do it. Recovery mode without dissolving it.
My LG Optimus 2X from windmobile is stuck in boot screen. I recently rooted my phone which worked perfectly fine than I installed CWM ext which messed things up, phone was hard resetting every time it started up. So I went to the market place and installed CWM and installed recovery from within the app and decided to install [ROM] MIUI v4 2.7.20 [Multilang][New base] [25/07/2012] through the CWM app. It loads up in recovery FINALLY and I installed it. After reboot its just stuck on LG boot screen I cant go into recovery mode either it just reboots and gets stuck at boot screen. is there anything that i can do to recover the phone?
how u tried this? - http://forum.xda-developers.com/showthread.php?t=1006745
i have done it a couple of times after a bad flash on my P990 and it works great.
i got the NVFlash ready, take out the battery and while pushing down Power and Vol. down button i connect the usb cable and it starts up and u can open NVFlash and let it do it's work.
thank you lets see if it works out:fingers-crossed:
puma99dk| said:
how u tried this? - http://forum.xda-developers.com/showthread.php?t=1006745
i have done it a couple of times after a bad flash on my P990 and it works great.
i got the NVFlash ready, take out the battery and while pushing down Power and Vol. down button i connect the usb cable and it starts up and u can open NVFlash and let it do it's work.
Click to expand...
Click to collapse
hey so NVFlash did work but now i am getting no signal, I went to settings> About phones > baseband: unknown. So I decided to use smart flash and flash the "LG_P990_1035_21_2011-06-22", it just wouldn't flash it loads up to 50% than i get timed out error. Is there anyway to fix this issue.
Thanks.
ali2k4 said:
hey so NVFlash did work but now i am getting no signal, I went to settings> About phones > baseband: unknown. So I decided to use smart flash and flash the "LG_P990_1035_21_2011-06-22", it just wouldn't flash it loads up to 50% than i get timed out error. Is there anyway to fix this issue.
Thanks.
Click to expand...
Click to collapse
this might be an issue with BB and RIL combination...try to install the GetRIL app from the play store and try to install a recommended RIL....reboot and check...
you can try the smartflash after trying this...
Hope this helps
The problem was that I was flashing p990 firmware on my P999. oddly enough it ran but without any baseband. long story short I used the ROM from this thread http://forum.xda-developers.com/showthread.php?p=17258229 and it worked I was in the wrong phone section the whole time. thanks every one for the help couldn't have recovered it without your help thanks :victory:
Hi.
I have LG p990 and it is a rooted mobile and i have tried several CM builds. i was running CM7 build from one month . Today when i tried to power off and than tried to Boot in Recovery mode it didn't booted instead it turn off just shows LG logo and even didnt go to splash screen. even if i try to boot in recovery mode it still do same i tried putting out battery but all in vein . i am very desper from it Please any solution.
cheeta123 said:
Hi.
I have LG p990 and it is a rooted mobile and i have tried several CM builds. i was running CM7 build from one month . Today when i tried to power off and than tried to Boot in Recovery mode it didn't booted instead it turn off just shows LG logo and even didnt go to splash screen. even if i try to boot in recovery mode it still do same i tried putting out battery but all in vein . i am very desper from it Please any solution.
Click to expand...
Click to collapse
Download this and use SmartFlashTool to flash this. It will unbrick your phone but beware you will lose all your data.
Code:
http://forum.xda-developers.com/showthread.php?t=1715272
kalpak2021 said:
Download this and use SmartFlashTool to flash this. It will unbrick your phone but beware you will lose all your data.
Code:
http://forum.xda-developers.com/showthread.php?t=1715272
Click to expand...
Click to collapse
I downloaded the zip and SmartFlashTool, SmartFlashTool won't detect my device . I have properly installed my Mobile driver. if my mobile does't proceed more than starting screen how it will detect my mobile
It worked at last
cheeta123 said:
I downloaded the zip and SmartFlashTool, SmartFlashTool won't detect my device . I have properly installed my Mobile driver. if my mobile does't proceed more than starting screen how it will detect my mobile
Click to expand...
Click to collapse
I found that the given steps won't work with Windows 7 but with Windows XP they worked
cheeta123 said:
Hi.
I have LG p990 and it is a rooted mobile and i have tried several CM builds. i was running CM7 build from one month . Today when i tried to power off and than tried to Boot in Recovery mode it didn't booted instead it turn off just shows LG logo and even didnt go to splash screen. even if i try to boot in recovery mode it still do same i tried putting out battery but all in vein . i am very desper from it Please any solution.
Click to expand...
Click to collapse
Download the mobile driver again, and follow the instructions correctly. Like, removing the battery, press volume down while plugging in until the s/w update screen appears, etc etc. Good luck! Hope it'll boot after the flash.
Sent from my Optimus 2X
Mark
I've a similar-ish issue. I've got CWM installed and can boot into CWM ok. My problem was that I tried to install a ROM (MIUI) and the install had no errors, but when the phone was powered on it hung at the MIUI screen.
So I reverted to a backup successfully and decided to have another go (same problem). This time, after I restore to the backup (which is installed without error by CWM) I can't can't past the initial LG screen. Seems to go into reboot loop.
Any thoughts anyone? If I can get into CWM ok and have a working restore then is there something I'm doing wrong!!
thanks,
Mark
Hi All,
I'm in trouble with my P990.
i was using offical cm10 nightlies for a while and i updated new official cm10 nightlies. After update phone opened and 5 minutes later screen frozen. i removed battery and put it again. But phone not opened again.
I tried NVFlash but NVflash stuck on "waiting for bootloader to initialize" message.
How can i handle this situation.?
Thank you in advance for your help.
yildirimkm said:
Hi All,
I'm in trouble with my P990.
i was using offical cm10 nightlies for a while and i updated new official cm10 nightlies. After update phone opened and 5 minutes later screen frozen. i removed battery and put it again. But phone not opened again.
I tried NVFlash but NVflash stuck on "waiting for bootloader to initialize" message.
How can i handle this situation.?
Thank you in advance for your help.
Click to expand...
Click to collapse
Maybe try to flash any rom with SmartFlash
1.Take out battery
2.replace battery
3.hold Vol- (volume down button) AND power button together until you see the recovery menu. then scroll to Cm updater file and reflash -or- clockwork mod file and flash from backup.
No way!!
When i tried Smartflash pc not found com ports. so i cant flash with this way.
also i tried (JAZZMAN's advice) power and vol- to enter CWM menu but i cant see any thing. (my phone not open)
yildirimkm said:
When i tried Smartflash pc not found com ports. so i cant flash with this way.
also i tried (JAZZMAN's advice) power and vol- to enter CWM menu but i cant see any thing. (my phone not open)
Click to expand...
Click to collapse
How phone must show bootloader or you have installed already CWM it must boot into CWM, if it doesn't show your phone to the service .
yildirimkm said:
When i tried Smartflash pc not found com ports. so i cant flash with this way.
also i tried (JAZZMAN's advice) power and vol- to enter CWM menu but i cant see any thing. (my phone not open)
Click to expand...
Click to collapse
checkfor Rusty's thread for recovery
check for Homero's thread to unbrick with a clean and stock ROM....
LG is 99.999999999% unbrickable AFAIK
Maybe this will work
http://forum.xda-developers.com/showthread.php?t=1975274
Sent from my LG-P990 using xda app-developers app
Service
Thanks for your help.
I couldnt fix my phone. I sent to service. i hope they can fix