Related
Hello People
I have braked my Breeze.. I have installed futureshok's WM6 Rom.
But today (i dont know why (i'm a idiot)) i have installed 1.09 SPL and now i cant start my Phone. I see the Splash Screen but the phone doesnt continue to start.
Cane someone help me?
EDIT: Hard Reset doesnt work
EDIT2: the same problem here:
http://forum.xda-developers.com/showthread.php?t=319448
Sorry my english, i am German speaker.
Thanks
i've send some infos trough Pm in german : )
hello
same problem
i have
IPL-0.90
SPL-2.05
my phone does not pas the 3-rd logo screen
!! Problem solved !!
the 1.09 boot loader is QTEK_A07
you need to flash
1.RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP
2.SSPL your device
3.flash other rom
Best Regards
And Happy Flashing
yes but i have:
IPL 1.0 And
SPL 1.09
I must somehow flashing SSPL 2.0 from the Bootloader
just flash
RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP
and will boot
after that you install sspl
yes i have tested it, but it breaks by 1%.
i cant install this rom..
I have a SFR S300+ unlocked and hardspl, and all function of it are ok. But when I put my device into bootloader, I saw the red text "WLAN ERROR" under the text USB on bootloader screen. I don't know how to fix this problem, but I think if my device use the official rom, the bootloader will be downgrade to the original bootloader and solve this problem. But I can't find the official rom for SFR S300+, it only have official rom for DOPOD and HTC. Can I use DOPOD or HTC official rom for my device. Anyone can help me? Thank you.
phuonglev said:
I have a SFR S300+ unlocked and hardspl, and all function of it are ok. But when I put my device into bootloader, I saw the red text "WLAN ERROR" under the text USB on bootloader screen. I don't know how to fix this problem, but I think if my device use the official rom, the bootloader will be downgrade to the original bootloader and solve this problem. But I can't find the official rom for SFR S300+, it only have official rom for DOPOD and HTC. Can I use DOPOD or HTC official rom for my device. Anyone can help me? Thank you.
Click to expand...
Click to collapse
Official rOm from sFr and everything to get back to original can be found here, instructions in french :
Official sFr rOm
Official rOm from hTc can be found here :
Official hTc rOm
I would suggest you try to hard spl again with version Olipro 1.2
I had Olipro 1.3 and also ended with this WLAN error message,
plus flashing issues, so for me return to 1.2 and no problem ever
So, happy flashing.
brds,
nAr
narshorn said:
Official rOm from sFr and everything to get back to original can be found here, instructions in french :
Official sFr rOm
Official rOm from hTc can be found here :
Official hTc rOm
I would suggest you try to hard spl again with version Olipro 1.2
I had Olipro 1.3 and also ended with this WLAN error message,
plus flashing issues, so for me return to 1.2 and no problem ever
So, happy flashing.
brds,
nAr
Click to expand...
Click to collapse
Thank you so much. I'm going to flash these Rom.
I tried to flash with the NBH SPL in this SFR official Rom, but now when I put my device to Bootloader, it shows 3 bootloader screens:
- The fisrt is:
Trin 100
IPL -0.5
Trin100
SPL 1.3Olipo
USB
WLAN ERROR
- The Second is: Loading
- And the last is:
Trin 100
IPL -0.5
Trin100
SPL 1.3Olipo
USB
I don't understand what's happen with my device. Can anyone explain for me? Thank you.
If you mean there re 3 colors plus white, then it's normal
I see you have olipro 1.3, to get rid of the WLAN error install bootloader Olipro 1.2
Then, flash the so called "ROM".
narshorn said:
If you mean there re 3 colors plus white, then it's normal
I see you have olipro 1.3, to get rid of the WLAN error install bootloader Olipro 1.2
Then, flash the so called "ROM".
Click to expand...
Click to collapse
No, there are 3 screens appear in turn after I press Camera+Power buttons and reset. Thank for your repply.
The 3 screens are not normal. You should see a single, stable tricolor screen.
Could you try to return to Olipro 1.2 then tell me the result ? does it correct bootloader ?
brds,
nAr
narshorn said:
The 3 screens are not normal. You should see a single, stable tricolor screen.
Could you try to return to Olipro 1.2 then tell me the result ? does it correct bootloader ?
brds,
nAr
Click to expand...
Click to collapse
I try to use Olipro 1.2, and the result is the text "Wlan error" disappear, but my phone still have 3 bootloader screens. I think if I flash original rom with original bootloader, my phone will go back to normal. The rom you sent to me only have origin SPL, OS, and radio, not have original bootloader. Thank you (sorry for my English)
What about those "3 screens" ? here attached is a normal photo of the bootloader, eg style of screen
narshorn said:
What about those "3 screens" ? here attached is a normal photo of the bootloader, eg style of screen
Click to expand...
Click to collapse
Sorry for my late, narshorn. My first and last bootloader screens are same as the picture you attached, but the second screens only have grey colour with the text "Loading....".
phuonglev said:
the second screens only have grey colour with the text "Loading....".
Click to expand...
Click to collapse
This is not normal. Huuh, I think maybe need to be repaired.
narshorn, my last question: Can my SFR S300+ flash Dopod official rom which have IPL, SPL, Radio and OS?
phuonglev said:
narshorn, my last question: Can my SFR S300+ flash Dopod official rom which have IPL, SPL, Radio and OS?
Click to expand...
Click to collapse
Is there someone can answer my question?
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Maybe this topic can help you to find out how to restore SPL
read "how to restore Stock SPL for warranty reasons."
http://forum.xda-developers.com/showthread.php?t=431218
thx dreaminside
yes, I already did, I followed it
but I don't know if I succeeded or not
oh sorry for that
i forgot the default SPL number too.
http://forum.xda-developers.com/showthread.php?t=497511
4. How To Install The Stock Rom (For Warranty Reasons)
Download .mov file here 31mb (Quicktime Format)
try this one , maybe it will help you find out
black heart said:
Hi everbody
I used HARDSPL to flash cocked roms on my X1
the point is I have to send it to repair the keypad, I tried SE update center to flash the stock 6.1 ROM, but it didn't work as I expected, so I flashed the stock RUU_SIGNED from the sticked Hard SPL thread here, tried to update again using update center, and bingo, it's working, but my point is, what should the boot loader screen now be showing, mine shows
"KOVS110
SPL-0.78.0000
MicroP1-787
MicroP1-707"
any problems if I sent it to the repair center now?
thx
Click to expand...
Click to collapse
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Thanks dreaminside
caliban2 said:
you're fine, that's how it should look like.
(actually, you reflashed stock-spl 0.72 and SEUS updated it to 0.78)
if you still had hard-spl on it, it would read "0.72.OliNex".
edit:
did you flash a stock-rom first or not? you should do that BEFORE flashing stock-spl... (in case you're using a custom rom)
Click to expand...
Click to collapse
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
black heart said:
Thanks dreaminside
well, I couldn't flash stock rom using SEUS without first flashing Stock SPL, so yeah, I flashed SPL first, then ROM, but boot loader is still showing the same msg, so am I still fine ??
Click to expand...
Click to collapse
well, if SEUS didn't complain...
concerning the bootloader-figures you're fine.
Looking at your SPL its looks like you've been successful
Dear friends,
2 days ago, i tried my hd7 to update official Mango (posted from football) from NoDo. But update is not complated and my phone is still stay in Bootloader Screen. Everythings looking fine in Bootloader screen :
RED:
PD29100 SS-BC (4K)
SPL-4.5.2250.0 (129185) MNG
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
GREEN:
SD SANDISK 15193MB
Partition Info-v211v413
BLUE:
Empty
WHITE:
Serial - USB (After plug cable)
But, when I try flash a ROM, Update Utility saying : Error 264: Invalid Vendor ID and my phone is going back to Bootloader Screen.
Before Update:
My device is not haved RSPL/HSPL.
Working with official stock rom (updated to 7403 via Zune)
Not installed Chevron Unlock
I tried to flash all official stock ROM :
RUU Schubert HTC Europa 1.16.401.01
RUU Schubert HTC Europa 1.69.401.01
RUU Schubert S HTC 4.05.401.02
After tried many ways and methods, I was angry and i tried RSPL/HSPL to Mango SPL (4.XXX) but RSPL/HSPL not worked on my phone (Error: USB Device Not Detected)
Now:
Bootloader Screen looking fine.
I tried to flash all official ROMs from HTC.
Never Installed HSPL/RSPL to phone
I installed official rom before via Rom Update Utility, but phone haved SPL 3.XXX
My phone is stiil wait in boot screen. Not openning OSX.
My Phone is HD 7 Unbranded - Sim Free
any solutions?
(Im so sorry for my bad English)
Thanks...
Are you completely sure you have an Europe HD7?
Did you ever flash an original rom before?
actually im not sure my friend. but i was upload a europan flash to my phone before (RUU_7403).im trying asian now.
I hope for you that asian roms will work.
The only solution I which can work if other original roms also fail is to get the eqipment to flash via gold card methode.
But I hope asian roms will work
thank you sadman but i tried 2 asian roms but not worked. i cant believe this. Resuming error 294 Invalid Vender ID...
So lets say you really have an european HD7
When you flash an old rom (Standard or NoDo) did the flashing tool try to flash or does it fail imidietly?
If you flash old rom's the phone is rebooting after flashing spl & than continues flashing the rest.
maybe by trying older roms, spl is flashed but the os fails like the Mango spl which you mentioned in the first post.
If the bootloader doesn't show the spl version 4.xx you have the chance to try RSPL/HSPL and flash a good/old rom
yes bro, i have european HD 7. after the trying Mango update, SPL is changed to 4.5 from 3.1 and probem started with Mango Update. i need to change SPL, i know, but RSPL/HSPL is not working with this SPL. Phone driver is "Qualdcomm CDMA Technologies MSM" in bootloader mode and showing under Mobile Devices -> HTC Sync in Device Manager.
Edit:
Dear friends. Problem is solved !? i was try RSPL to SPL 4.5 (very dangerous), tool is say a error "not complated". And now, stock rom is openned automatically? i dont understand anything.But phone is half bricked.Now, not showing anything in Bootloader screen.Red-Green-Blue and White is empty.
redzippo said:
yes bro, i have european HD 7. after the trying Mango update, SPL is changed to 4.5 from 3.1 and probem started with Mango Update. i need to change SPL, i know, but RSPL/HSPL is not working with this SPL. Phone driver is "Qualdcomm CDMA Technologies MSM" in bootloader mode and showing under Mobile Devices -> HTC Sync in Device Manager.
Edit:
Dear friends. Problem is solved !? i was try RSPL to SPL 4.5 (very dangerous), tool is say a error "not complated". And now, stock rom is openned automatically? i dont understand anything.But phone is half bricked.Now, not showing anything in Bootloader screen.Red-Green-Blue and White is empty.
Click to expand...
Click to collapse
it says not completed, have u tried flashin a stock rom??
Magpir said:
it says not completed, have u tried flashin a stock rom??
Click to expand...
Click to collapse
i believe, you try to hard to help, magpir.
this thread is two months old, besides...
as redzippo said, (s)he has a half-bricked device.
in which case, flashing a Shipped ROM will not solve this issue.
hell i have the same problem! anyone have the solution??i tried like 10 different roms and none worked...if i try to flash with RUU wrapper in one case i get to 1% flash,and in other 3% flash and then the error invalid vender id...
sorry for my poor English..i have HTC T-mobile hd7 and after reading posts about how to install custom ROM i tried to do that and it works fine for me..
but after flashing 3rd custom ROM it was broke and won't start ever
but my friend by riff box success to fix that problem and now it start automatic to bootloader screen..and now don't know what i need to flash any rom and make it normal again..I'll attach photo of my bootloader screen...
imageshack.us/photo/my-images/39/photorm.jpg
PLZ anyone help!!
if the image won't open this is what it came's in bootlader screen
PD29*** SS-BC (4K)
SPL-1.18.2250.0(111116)
MicroP (LED) 0*07
TOUCH S1(V2. A, #1625)
Which ROM did u flash and u don't have any kind of XSPL....you should have R/H SPL and then flash a custom rom....
Did u flash a hd7 rom? Or another?