Preferably without installing a new kernal.
Hmm..
The FW Version is 2.3.3
The Baseband is I9000NEJV5
The Build is GINGERBREAD.NEJVD
Kernal is 2.6.35.7-I9000NEJVD-CL183009 [email protected] #2
Anyone know?
Hey mate, I have exactly the same firmware, baseband etc and the phone is on 3 network (H3G UK). I wanted to know if you have found a way to root it. Thanks
you can do this using fuguroot by nikademus!
http://forum.xda-developers.com/showthread.php?t=1010141
Related
Hi all,
I am wondering if someone can guide me to the correct direction.
This is my phone (samsung Galaxy I9000)
Model GT-I9000
Firmware: 2.1-Update 1
Base Version: I9000 DTJG3
Kernel 2.6.29 [email protected]#2
Build Number: ECLAIR. DTJG4
It is unlocked - orginally from Optus.
this phone feels very slow and not very responsive at the moment.
I am thinking of upgrading the firmware hoping that it will improve the persformance
Can someone please tell me which firmware will be best for me? I'm not going to root the phone and I am just after most effecient firmware (good wifi, GPS and signal)
I am not sure which one is most stable for my phone.
Thank you
you could flash a stock gingerbread rom.the ones with bootloaders.jvh is pretty stable.2.3.4 ones will have phone fc bug..you'll hv to root ur phone to get rid of that bug..stock roms u can dwnld from ramads thread..for gps/wifi/signal u will have to flash the appropriate modem.there was a thread comparing modems somewhere here on the forum.try searching it.if u really want near zero lags it would be best to do ext4 lagfix..but again rooting will be reqd.gb roms are fast without these but lagfix still brings noticeable change.
Thank you for the reply.
It seems that I am gonna need to do root on it.
If that is the case, It will be much appreciated if I can be pointed to the correct link (tutorial - step by step) to get this process.
After reading some of the psosts I get really confused with all the type of firmware and kernel etc...
any suggestions and links I can follow will be much a great help much appreciated
Thank you again
The below links helped me out.
http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
http://www.theandroidsoul.com/root-xxjvp-firmware/
Read the tutorials carefully, then read them again and again until you are sure and confident. do not use if you dont feel confident.
Make sure you have the 3 button combo (recovery and download).
You should be able to update to gingerbread via Kies JVN 2.3.3 -optus
Drift spunk said:
You should be able to update to gingerbread via Kies JVN 2.3.3 -optus
Click to expand...
Click to collapse
Thank you - updating now
You got proper internet connection?If yes then kies will diffinetly show either This is the latest firmware or there is an update available.
Sent from my GT-I9000 using XDA App
ardabelati said:
Thank you - updating now
Click to expand...
Click to collapse
Nice I'm on 2.3.4 jvr with jvn csc and jv1 modem and its the best combo and I have flashed every rom, samsung and miui
Sent from my GT-I9000 using XDA App
Hello, you can try JPY on 2.2.1, it's a stable firmware without the bugs of the gingerbread, if you doesn't want to root your phone.
Thanks for all the replies guys,
I just upgraded to GingerBread 2.3.3 XWjVN.
My next question is:
If I want to get rid of all those Optus rubish - Can you please tell me which firmware do I need to install?
There are so many types and I really get confused which one is going to work for me.
I have seen my friend's SI9000 very fast and snapy - is the firmware upgrade the way to do it?
Thanks again guys
Flash any custom roms from here CUSTOM ROMS
hi everybody. i have a p1000 and i am wondering what is the correct software i need to download in order to go from froy to gingerbread? it says jk5 jj7 kernel 2.6.32.9 and i am from greece . when i do the thing with the IMEI i see it is using COS. thanks for you help as you proably realize i am a complete newbie
Go to the stock JQ1 gingerbread prepared by Chainfire. Use the version with the bootloader. Then flash the Chainfire v3.3 rooted kernel.
From this, you can flash any other rom you like.
i suggest you follow this guide http://p1000.teamovercome.net/?page_id=64
Hey everyone. I am very interested in rooting, and hopefully flashing once i have done the basic root first. Please can you answer each question I have an Orange branded SGS GT-i9000. Here are the specs:
FW Version: 2.3.5
Baseband Version: I9000BVJV3
Kernel Version: 2.6.35.7-I9000BVJVC-CL679241 [email protected] #2
Build Number: GINGERBREAD.BVJVC
Question 1: do i need to know the whole of the kernel or just part of it?
Question 2: I always see rooting guides saying 'How to root (FW version) JV(something). Where does the JV come from, as i have 2 types of JV, JV3 and JVC. So what does rooting depend on other than firmware version?
Question 3: I have noticed the Orange firmware is a different JV. So how do i know the root will work with my version as the root guides are always on stock roms?
Thanks in advance : )
Hello Tarnwilliamson, I think I am in the same boat as you, I also am on Orange with the same spec phone as you wanting to root. I was just wondering have you found out anything about rooting this phone? I have searched dev and q & a section but there seems to be no posts on this topic. I dont want to start a new thread so I though I would ask you first. Thank u in advance.
hello
You may try with Super one click root or try to flash your rom with odin to STOCK ROM (i have I9000xxjvu for example) and use CFROOT for your rom with PDA in odin. That gives u the root accsess, superuser and busybox ( CFroot IS A KERNEL) it is many subject on XDA.
Hello Marcinrek21, Thank you for your reply. As my Build number ends with jvc isnt there a specific file I need to flash with if using Odin? Or am I mistaken and I can flash with any cf root file as long as it is for a gt19000? As for super one click is that still compatibable with 2.3.5 as I remember reading somewhere the bootloader may be locked with gingerbread? Thank you in advance.
Hi there! I apologise for the question as you probably get this a lot.
I can't find a clear and concise tutorial (that i can understand) on how to root my Galaxy S and its specific version.
Can anyone help me and point me in the right direction?
I am not entirely new to rooting as i've rooted my GS3 fairly easily, this however seems more difficult.
Here are my phones information:
Firmware Version 2.1-update1
Baseband Version I9000XXJM1
Kernel Version 2.6.29 [email protected] #2
Build number ECLAIR.I9000XXJM1
I understand I have to download a kernel of some kind so I can root in within ODIN...however there are so many CF versions I am really stuck
Thankyou in advance and a quick reply would truly be appreciated. Thankyou!
Ok...You are still in froyo so you have to update to gingerbread 2.3.3 then you have to install the "JW4_JW4_JW4" value pack that will update your i9000 to 2.3.6, only now you can flash a rooted kernel..
AndyLFC1992 said:
Hi there! I apologise for the question as you probably get this a lot.
I can't find a clear and concise tutorial (that i can understand) on how to root my Galaxy S and its specific version.
Can anyone help me and point me in the right direction?
I am not entirely new to rooting as i've rooted my GS3 fairly easily, this however seems more difficult.
Here are my phones information:
Firmware Version 2.1-update1
Baseband Version I9000XXJM1
Kernel Version 2.6.29 [email protected] #2
Build number ECLAIR.I9000XXJM1
I understand I have to download a kernel of some kind so I can root in within ODIN...however there are so many CF versions I am really stuck
Thankyou in advance and a quick reply would truly be appreciated. Thankyou!
Click to expand...
Click to collapse
1. Rooting GT-I9000 2.3.6 [DD JV7 / JVB]
2. Flashing To Original Rom - Using Odin on GT-i9000
3. Installing Jelly Bean 4.1 on Galaxy S GT-I9000
4. Flashing To Original Rom - Using Heimdall on GT-i9000
5. Installing Ice-cream Sandwich 4.0.4 On Samsung Galaxy S GT-i9000
6. Rooting GT-I9000 2.3.3 [DDJV9]
7. Save your bricked GT-i9000
nigox91 said:
Ok...You are still in froyo so you have to update to gingerbread 2.3.3 then you have to install the "JW4_JW4_JW4" value pack that will update your i9000 to 2.3.6, only now you can flash a rooted kernel..
Click to expand...
Click to collapse
FYI 2.1 is eclair, not froyo. That's 2.2
Rooting Eclair is easy as hell. Just use the one click root tool.
http://forum.xda-developers.com/showthread.php?t=742403
Hello,
I am wanting to root my galaxy S but I can't seem to find any for my baseband and firmware.
I am using Gingerbread 2.3.3 on the baseband I9000XXJVQ.
The kernel I am using is 2.6.35.7-I9000XWJVP.
There is no software update available. I live in Australia. How can I root my phone?
Thanks,
Lachlan
toobywedge said:
Hello,
I am wanting to root my galaxy S but I can't seem to find any for my baseband and firmware.
I am using Gingerbread 2.3.3 on the baseband I9000XXJVQ.
The kernel I am using is 2.6.35.7-I9000XWJVP.
There is no software update available. I live in Australia. How can I root my phone?
Thanks,
Lachlan
Click to expand...
Click to collapse
Install this app, you will get root, if you phone is locked under contract, like Telstra, you might have problem using the i9000 ROMS to upgrade, if its international i9000, you can use any combination of 2.3.6 gingerbread ROM and same JVQ modem (meaning modems can be switched.)