Hi,
Here is the radio from the Bell GB OTA update, edited to remove everything but the radio.
Preq: Unlocked and CWM recovery partition installed. May work with regular CWM, not tested.
Download it here.
I am currently using it with Bell's 2.2.2 Froyo. Speed test isn't the greatest, 77.15 got better results for me, probably best with GB. Nope, not that great with GB either, oh well..
EDIT: The new IHOP-Bell seems to have had some affect on this radio, speed is a lot better now. CG47 seems to affect the radio.
Cheers!
Hi,
I just saw another Bell Gb radio
http://forum.xda-developers.com/showthread.php?t=1260963&highlight=bell
So is this updated version then urs or ur updated ?
Bell OTA GB Radio N_01.77.33P
xateeq said:
Hi,
I just saw another Bell Gb radio
http://forum.xda-developers.com/showthread.php?t=1260963&highlight=bell
So is this updated version then urs or ur updated ?
Bell OTA GB Radio N_01.77.33P
Click to expand...
Click to collapse
That one would be the latest, the .33, not the .30.
Cheers!
One more thing how can i check that its Bell Radio not some other radio. last i checked u updated your gobstoper 2.3.4 to official Bell GB and then u posted .30 Radio so when did the new radio got released ?
xateeq said:
One more thing how can i check that its Bell Radio not some other radio. last i checked u updated your gobstoper 2.3.4 to official Bell GB and then u posted .30 Radio so when did the new radio got released ?
Click to expand...
Click to collapse
It is in the official Bell GB.
Cheers!
Sent from my MB860 using xda premium
Related
i am on froyo with the new radio, and i want to go back to the desire rom. which radio should i get?
thanks
Probably the radio you were on before you updated. Which nexus version do you have, ATT?
im on the tmobile one...
so wipe, flash radio, then flash Desire rom? thats all the steps i would need to do?
thanks so much
could anyone let me know the best radio?
no one? really?
Radio performance varies by region. No one can tell you the "best" one for you unless they follow you around all day.
well what is the STOCK radio that came with my nexus when i got it with 2.1 before i upgraded to froyo
dvigue said:
well what is the STOCK radio that came with my nexus when i got it with 2.1 before i upgraded to froyo
Click to expand...
Click to collapse
No idea, but check:
http://forum.xda-developers.com/showthread.php?t=654869
Noticed that there's on new Asian Rom with Froyo version @samsung firmwares. Weird naming though I9008. Anyone tried it?
the rom code is so strange
I am using this ROM now ,It is 2.1 ROM,Hong Kong Version firmware,Support English,chinese.
http://up.kingmobi.net/i9000zsjg188.rar
Password:[email protected]
i9008zmjg1 ROM is for china mobile i9008 Model (TS-CDMA brand).
http://up.kingmobi.net/i9008zmjg110.rar
Password:[email protected]
Downloading now...
Got a bug with Mobile AP with JP3...
Hopefully this can solve it...
BigQ said:
I am using this ROM now ,It is 2.1 ROM,Hong Kong Version firmware,Support English,chinese.
http://up.kingmobi.net/i9000zsjg188.rar
Password:[email protected]
Click to expand...
Click to collapse
So this is not 2.2 ?
aatjitra said:
So this is not 2.2 ?
Click to expand...
Click to collapse
YES, It is a 2.1 base android rom.
BigQ said:
I am using this ROM now ,It is 2.1 ROM,Hong Kong Version firmware,Support English,chinese.
http://up.kingmobi.net/i9000zsjg188.rar
Password:[email protected]
Click to expand...
Click to collapse
Can you confirm the version again in phone settings?
dereknas said:
Noticed that there's on new Asian Rom with Froyo version @samsung firmwares. Weird naming though I9008. Anyone tried it?
Click to expand...
Click to collapse
I've tried this one but failed.
Well, I guess the version must have been updated incorrectly then
It got me excited awhile there though.
dereknas said:
Well, I guess the version must have been updated incorrectly then
It got me excited awhile there though.
Click to expand...
Click to collapse
yeah... me too...
SamsungFirmware's Twitter post 3 hours back mentioned this - 'Samsung I9000 ASIA firmwares 2.1 = I9000DXJG4 2.2 = I9008ZMJG1'.
I'm downloading both - will give the supposedly 2.2 firmware a try but am slightly concerned that it's an 'I9008...' and not an 'I9000...'.
Anyone tried ZMJG1 yet?
Looks like the 2 ROM released by samsung-firmware are not very popular.
tired of flashing new test ROM?
content removed for giving incorrect information..
mystaka said:
AFAIK, model number ends with an 8 are for chinese market. They also says Anycall on the phone instead of Samsung. They should have the same specification as those models end with a 0. for example Tocco was F480/F488, Omnia the ancient was i900/i908.
Click to expand...
Click to collapse
both rom tested... not working.
dereknas said:
Can you confirm the version again in phone settings?
Click to expand...
Click to collapse
It's a 2.1 Android rom not a 2.2
http://bbs.gfan.com/android-173001-1-1.html
This ZMJG1 is 2.2, but you need to ude Ares to flash it, anyone what to try it?
Do not flash this the ZMJG1 is for GT I9008 2.2 but the only problem is that the I9008 spec is a single GSM band 1900 Ghz.
For more infor about I9008 check this:
https://fjallfoss.fcc.gov/oetcf/eas...me=N&application_id=371245&fcc_id='A3LGTI9008'
Wow, the china market for i9008 has a Froyo rom, nice indeed.
Also, it uses Aries Downloader and coupled with Shrewsbury-v5 adb suite, no wonder it looks strange.
DO NOT ATTEMPT TO FLASH this on i9000.....I almost bricked my phone trying to flash that with odin. Using the included flasher didn't work. It will fail right in the start of flashing with Odin, and after that, phone cannot boot up!!
Lucky still can put device into bootloader mode, but it took me few attempts before odin was able to load JM2 into rom!
[MOD] Radio SBFs N_01.95.00R (Retail SouthEast Asia) & CWM N_01.100.00R (Orange FR)
Here are some radios users recently requested:
N_01.95.00R
(from retail southeast asia .sbf here)
AT&T .sbf
International .sbf
N_01.100.00R
CWM file
can i flash 1.100 cmw on gb 4.5.91?
aleve1983 said:
can i flash 1.100 cmw on gb 4.5.91?
Click to expand...
Click to collapse
Untested, but think it should be fine.
work for me on att cherry 5d
eval- said:
Here are some radios users recently requested:
N_01.95.00R
(from retail southeast asia .sbf here)
AT&T .sbf
International .sbf
N_01.100.00R
CWM file
Click to expand...
Click to collapse
Thanks a ton for this!
You sir are awesome!
Can convert all to CWM?
This is what I'm looking for
Sent from my MB860 using XDA App
SEA users, does this improve the speed?
Great information, that's I need
Sent from my MB860 using XDA App
Hi,
Don't use the N_01.100.00R radio on the Bell GB firmware, it works but the speed is rather bad and sporadic. Think 300 baud modem for wifi and original ATT radio for uploads divided by 2.
Cheers!
use N_01.100.00R radio but in 3g always have 1 bar signal.
rom 4.5.91 att. how to fix this problem?
How do install the sbf? RSD? I know it's a noob question but I'm used to flashing img's and usg zips through CWM.
edit: Used RSDlite, and the AT&T radio only showed 1 bar. Speed was slower than the .30 radio in case anyone was curious.
I install through CWM.
sergey1977 said:
I install through CWM.
Click to expand...
Click to collapse
You installed the ATT SBF through CWM? How did you do that?
so im on a bell atrix running 4.5.91 and have downloaded both N_01.100.00R and the International and both are giving me only 1 bar? any ideas?
CWM file
I use the CWM file in the head of topic
Ya i tried that and still one bar...weird huh?
Try this.... http://forum.xda-developers.com/showthread.php?t=1159505&highlight=radio
Or here for international: http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1185171&v=1&libid=1312097780208&out=http%3A%2F%2Fwww.4shared.com%2Ffile%2Fod3GDWX8%2FCWM_INT_Recovery.html&ref=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1192340%26highlight%3Dbell%2Bradio&title=%5BMOD%5D%5BCWM%5D%5BBell%5D%5BGobstopper%5D%20Stock%202.2.2%20for%20Bell%20Updated%207%2F30%2F2011%20-%20xda-developers&txt=CWM_INT_Recovery.zip
From this thread - http://forum.xda-developers.com/showthread.php?t=1185171
Phoneguy589 said:
Try this.... http://forum.xda-developers.com/showthread.php?t=1159505&highlight=radio
Or here for international: http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1185171&v=1&libid=1312097780208&out=http%3A%2F%2Fwww.4shared.com%2Ffile%2Fod3GDWX8%2FCWM_INT_Recovery.html&ref=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1192340%26highlight%3Dbell%2Bradio&title=%5BMOD%5D%5BCWM%5D%5BBell%5D%5BGobstopper%5D%20Stock%202.2.2%20for%20Bell%20Updated%207%2F30%2F2011%20-%20xda-developers&txt=CWM_INT_Recovery.zip
From this thread - http://forum.xda-developers.com/showthread.php?t=1185171
Click to expand...
Click to collapse
cheers for the help!!! but i have actually tried the 4.5.91 radio from kenneth and i got errors on both fasboot and sbf method, as for the other thread i am happy with my gingerbread and that thread wants me to revert back to stock 2.2.2 froyo...lol
but again cheers for the response =)
i tried all radio only in 1.77.30 and 1.87.00 correctly shows signal strength in 1.95
1.97 1.100 1 bar
hi When making a call the second party hear the sound of noise
i think my incredible s have problem with radio
i have 2.3.3 gb arabic rom
my incredible s is canadian version
how can fix this problem
hashnoz said:
hi When making a call the second party hear the sound of noise
i think my incredible s have problem with radio
i have 2.3.3 gb arabic rom
my incredible s is canadian version
how can fix this problem
Click to expand...
Click to collapse
Did you use a RUU to update to the Arabic GB ROM? If you didn't and flashed a ROM using ClockworkMod then you need to flash a GB radio, too.
i flashed through ruu so now i need flash GB radio?
i try return to the orginal rom ruu sasktel but i have now error 130 and i cant return to it..can change the radio maybe the radio is the problem?
hashnoz said:
i flashed through ruu so now i need flash GB radio?
Click to expand...
Click to collapse
The RUU should have contained a compatible radio for the ROM. I would check the Radio List thread in the Development thread to see if there are any other GB radios that might be compatible with your rom.
thank you i will wait you..i'm so sad from this problem
and if you have good rom with compatible radio give me.
Hey guys-
Looked for a thread about this and didn't find anything.
I read in some blog that in order to flash my stock rom to cyanogenmod 7.2, I need to have the latest gingerbread update.
a) is this true?
b) if so, how do I do it? Do I have to root it again once I get an official update?
thanks!
a. Nope. 2.3.4 is good. You can use 2.3.6 but not needed.
b. Yes, but as I said 2.3.4 works.
My baseband (stock ROM when I flashed CM is called baseband) is XXKPK 2.3.4. It works perfectly. But you need stock 2.3.6 from your country otherwise, 3G and GPS will not work.
So I purchased the phone in the country I live in - that mean I'm good to go?
purpledame said:
So I purchased the phone in the country I live in - that mean I'm good to go?
Click to expand...
Click to collapse
Yes, as long as your phone is 2.3.x (Gingerbread) it's alright to flash CWM and then flash custom roms, don't have to be the latest version (2.3.6).
purpledame said:
So I purchased the phone in the country I live in - that mean I'm good to go?
Click to expand...
Click to collapse
Yes. But if you want to update it to 2.3.6 you need to find a stock ROM from your country at samfirmware.com. But you don't need to update, because 2.3.4 is good. Now it depends on you.