Database Develop

[q] updating problem help!!!! (brick i think :s!!)

I was trying to install gingerbread update JVO from here
http://forum.xda-developers.com/showthread.php?t=948790
using odin 1.7 and i added the pda, phone and csc and tried to update it, then a big red fail appeared and i tried again and nothing happened i disconnected the phone and the phone just show a picture of a PHONE with a exclamtion symbol in the connection with the PC
HELP!!
Tried to connect it again and ODIN DOESNT recognize any phone connected!
UPDATE: i removed the battery, sd card and chip and the phone entered again in download mode and i succesffully update it to GB !!!

ok ok i just enter in panic when i saw that big FAIL, i took off the battery remove micro sd and the chip and the phone entered again in download mode, atm updating with odin, will update ASAP... and thanks!

ok! yay! i feel relief now i succesfully updated to gingerbread atm rooting the device!

I like the self convo going on here.. lol

Lol, share the anguish of the flash panic...a sublime monologue...sooo know that feeling !!
Sent from gt i9000 insanity 8.5/fugumod

LOL
Who could ever forget their first? PHONE ! PC

... hhuummmmm... I've done the same thing... but what is 'the chip' and how do you remove it!!!
Any help most appreciated!

smccaldin said:
... hhuummmmm... I've done the same thing... but what is 'the chip' and how do you remove it!!!
Any help most appreciated!
Click to expand...
Click to collapse
It's the SIM card

Get back to stock rom

Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english

Did you go into the downloading mode? (Vol down + middle button + power)
Sent from my GT-S5570 using XDA

Download
Yes Im in download mod and I get this message samsung_bml_format FAIL: 90220000
ONW UPDATE FAIL!!!

tauriuxx said:
Hi, so I installed CM7 on my galaxy mini but now I want go back to stock rom but the problem is when I conect my phone to pc odin detect it I click start(I want GB 2.3.4) and on my phone screen comes up message samsung own update fail . And nothing happens. Plz help my.
Samsung galaxy mini CM 7.1/2.3.7
P.S Sorry for bad english
Click to expand...
Click to collapse
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html

mr.faridcom said:
ARM11boot_GT-S5570.tar Flashed this like BOOT (nothing more selected) and after that reboot phone to download mode and flashed by following the guide. Now everything works fine. This model only need TASS_V1 ops file, no PIT files for this. Successfuly flashed with XXJL9 fw. Thanks RIFF for bootrepair this phone! BR
You can find "ARM11boot_GT-S5570.tar" here: http://www.4shared.com/dir/LqqytWde/sharing.html
Click to expand...
Click to collapse
be careful on flashing the bootloader buddy.. it can hard brick your phone.. DO IT AT YOUR OWN RISK..

Brick
Hehe. Now I bricked my phone. When I turn it on it just shows blank screen. But I talked with my Dad and we decided to make a jig usb. Well tomorow Im going to buy a 300k resistor and micro usb. I will try to make a jig usb with my dad so then I can put my phone into download mode and flash it. I hope this gonna work http://www.youtube.com/watch?v=eOxtYSdEy-o

You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"

chemicalrage said:
You got a nice dad man. If I tell my dad about USB jigs he would shout at me saying "WHO THE **** ASKED YOU TO ****ING SCREW UP YOUR PHONE? NOW SUFFER!"
Click to expand...
Click to collapse
yeah... lmfao

Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2

tauriuxx said:
Thanks for all replies. I already sold my galaxy mini so no more problems with it
Sent from my LT22i using Tapatalk 2
Click to expand...
Click to collapse
Buddy i dont know if i am right or not but always remember after u flash a custom rom and u want to return to gingerbread ,,
flash all 4 files i.e boot , phone,pda ,csc files.. never use md5 tar files a single flash files ..if u do that 100% u gonna brick ur phone,,
always remember 4 flash files...

Samsung Galaxy Mini S5570 will not turn on
Samsung Galaxy Mini S5570 device does not respond at all I crashed this ekllenti'i arraza was .Cyanus kernel v1.9 changelog, I would like to be the yarddımc from friends who knew I had to install.
Phone Opening Download Mode but not late

[HELP] Bricked Galaxy Ace

hello
iv accidentally installed wrong CWM on my ACE and now its wont boot wont respond to anything tried to enter DOWNLOAD MODE and RECOVRY ...
tried USB JIG too and it did nothing ...
the only thing it respond to its when its disconnected from PC and im pressing POWER + VL UP + HOME and connect it to my pc its shown as a "SAMSUNG CDMA Technologies"
can someone help me please ?
or my device is lost :crying: lol
thanks

If you can't get them work,then its completely bricked
POTATO!!!!

even if its shown in my PC as a "SAMSUNG CDMA Technologies" like i wrote ...

you phone is dead ... u flashed a recovery which changed mounting point ... its exactly the same brick that rom manager does ... take your ace to service center or jtag ... there really is nothing u can do!

Ohhh thats sux lol k thank...
Can someone close the tread please
Sent from my GT-I9300 using xda app-developers app

(SOLVED) Help plz

The other day i partitioned my sd card but during this process my phone froze. It corrupted the sd card and sum how messed my software up. So reflashed gdx bit gt bootloop. I ghought i wud start agen so flashed to stock with seus and started over. Now i cant run a custom kernel and my bootloader is definatly unlocked. It just gets stuck on kernel boot screen and cant even gt any further. Help plz im now running stock kernel and need to change it bk. Thanks
------------------------------------
Nevermind sorted it but sd cards had go in bin.
Sent from my E15i using xda app-developers app

[Q] Galaxy S3 lte Brick [Repartition]

Hello! S3 Lte (i9305) of my friend is bricked and gave me to solve this problem.. I have never been this stage and I have no idea .. Flashing offical rom with odion is stucked at hidden for so long and reflashed the rom several time but still stuck at Hidden, so I reflashed the offical rom with checking Auto reboot, Nand-erase , and F.Rest.. After checking Nand-erase, rom is flashed successfully but there was no partition .. So I reflash with pit file and repartition but still stuck at Get PIT for mapping.. in flashing .... How i can solve this! Plz help me! I only add PDA and PIT ..
Need other file like CSC,etc (I don't know excatly what are they) This is my 1st experience with bricked Samsung...
Sry for my bad english..

Screen shoot of odion

Before reading, the steps I used is to completely reformat the phone leaving nothing behind.
I have bricked my phone before. What I did is:
1. Download the stock firmware of your phone on sammobile (depends on your country and service provider)
2. Put your phone into download mode (off and on your phone. When it goes to Samsung title screen, press home, off and volume down button at the same time.)
3. Connect your pc to your phone and open odin.
4. Check and see if the message shows pass.
5. Under bootloader, open the md5 file that you downloaded before.
6. Start and wait till it finish.
7. Check your phone and reconfigure as if you have a new phone.
Hope this helps

Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app

xyp3r said:
Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
did you do a full wipe?

emmc is fried

SamC95 said:
did you do a full wipe?
Click to expand...
Click to collapse
Yes bro... I full wipe with phliz recovery.. mount error was occur at the starting recovery..

opssemnik said:
emmc is fried
Click to expand...
Click to collapse
How I can solve ?

xyp3r said:
How I can solve ?
Click to expand...
Click to collapse
change emmc chip(nly very skilled people will know how to do so) or change the whole motherboard