[Q] Galaxy S3 lte Brick [Repartition] - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Hello! S3 Lte (i9305) of my friend is bricked and gave me to solve this problem.. I have never been this stage and I have no idea .. Flashing offical rom with odion is stucked at hidden for so long and reflashed the rom several time but still stuck at Hidden, so I reflashed the offical rom with checking Auto reboot, Nand-erase , and F.Rest.. After checking Nand-erase, rom is flashed successfully but there was no partition .. So I reflash with pit file and repartition but still stuck at Get PIT for mapping.. in flashing .... How i can solve this! Plz help me! I only add PDA and PIT ..
Need other file like CSC,etc (I don't know excatly what are they) This is my 1st experience with bricked Samsung...
Sry for my bad english..

Screen shoot of odion

Before reading, the steps I used is to completely reformat the phone leaving nothing behind.
I have bricked my phone before. What I did is:
1. Download the stock firmware of your phone on sammobile (depends on your country and service provider)
2. Put your phone into download mode (off and on your phone. When it goes to Samsung title screen, press home, off and volume down button at the same time.)
3. Connect your pc to your phone and open odin.
4. Check and see if the message shows pass.
5. Under bootloader, open the md5 file that you downloaded before.
6. Start and wait till it finish.
7. Check your phone and reconfigure as if you have a new phone.
Hope this helps

Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app

xyp3r said:
Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
did you do a full wipe?

emmc is fried

SamC95 said:
did you do a full wipe?
Click to expand...
Click to collapse
Yes bro... I full wipe with phliz recovery.. mount error was occur at the starting recovery..

opssemnik said:
emmc is fried
Click to expand...
Click to collapse
How I can solve ?

xyp3r said:
How I can solve ?
Click to expand...
Click to collapse
change emmc chip(nly very skilled people will know how to do so) or change the whole motherboard

Related

[Q] Brick(death) before gingerbread,now in assisted coma

Hello,
guys i need your help...one week ago my european unbranded tab suddlenty died after repartitioned with wrong pit and flash with jmk (only download mode and samsung logo) Now,i try the new gingerbread with bootloaders, odin done his job,now i have is coming into recovery but new things come up....
E:Error in/cache/recovery/sec_cscs.zip (status 7) Instalation aborded (this after odin finish and restart)...
I put in recovery and is coming E:cant open directory/system/app/ (no such file or directory) copy applications failed
wipe cache- E:format_volume:rfs format failed on/dev/block/stl11
cache wipe complete
wipe date- the same as above but /mncblkop2
/stl10
/stl11
Do you thing we can revive this device?
Sorry for my english and thank you for speding time to reading this
It looks like you have a signed bootloader.
I could revive my tab as followed:
Go to http://www.samfirmware.com/ download the JJ4 firmware, flash that firmware, including rom, modem & CSC with partition on.
Your Tab will probably come to life then.
Then you can upgrade from there on, if you like.
I hope this will work for you too.
have the same problem (P1000, neverlocked)
JJ4 is one i didnt try ... would have a look, hope it would work
tried until now
P1000XWJMI
P1000XWJMK
P1000XXJHA
P1000XXJI2
P1000XXJI4
P1000XXJK5
P1000XXJMA
P1000XXJME
but no one of these helped. Some only let me use the DL mode, others would reactivate the soft buttons, but no chance for get a Android boot :/
pong
dap,jj4 not working i mean odin succes but no bootloding or recovery
Frantech.
Just follow what rwa66 said, I had exacly the same issue and he helped me getting my tab up and running:
1- Download and flash JJ4
Your tab might be still stuck on the boot logo. Just turn it off, then go to download.
2 Flash GB 2.3.3 (following Chainfire instructions ) and your tab will boot normally.
Sent from my GT-P1000 using XDA Premium App
Pong0820,
JJ4 is a full ROM it should resolve the csc errors. Even if your tab doesn't boot or gets stuck on boot, flash again GB 2.3.3
Good luck
Sent from my GT-P1000 using XDA Premium App
doing now,thanks tupo05
frantech said:
doing now,thanks tupo05
Click to expand...
Click to collapse
Good luck. I hope your tab will be up and running again.
Sent from my GT-P1000 using XDA Premium App
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
frantech said:
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
Click to expand...
Click to collapse
Congrats man. Welcome back lol
Sent from my GT-P1000 using XDA Premium App
youre really incredible ... nothing else to add. feel squeezed and kissed
pong
Good to hear Pong. Enjoy your GB 2.3.3
Sent from my GT-P1000 using XDA Premium App
i have same error..
i have a samsung galaxy tab verizon cdma. sch-i800.
but in 99% stop in MOVINAND... not show error...
i have disconnect manualy. and show this error...
help me please !
man,really i dont know much about verizon,t-mobil,i have european tab...but about movinant failed because you use wrong pit with that rom you flash(maybe i am wrong but it happend to me)
I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing. Is there any way I can solve this?
leave odin on,your tab conected and wait for odin to find yout tab(minutes,hours)
try first with wall charger few hours.....and then follow instructions on this topic or whatever you want to do
thanks frantech.
The issue is that my screen is completely blank. Can't get it even in to download mode. No combination of buttons does anything and connecting it to the computer doesn't even trigger that a usb device has been connected.
Is the only option to just leave it there with Odin?
IT IS WORKED!!! How AMAZING it is!!
OMG DUDE IT IS REALLY WORKED!!!
I got almost same bricked situation of my SGT!!!
Once i really think my GT have to send back to samsung...... but i have the last try of you guys' suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
Now my SGT has reborn from deadly bricked!!
Every1 got such problem can try this solution~

Super brick Solved

Dear Super brick user
First I would like to Thank HG 42 for his Support on super Brick
1. I followed the Thread http://forum.xda-developers.com/member.php?u=3597010
and http://forum.xda-developers.com/member.php?u=3597010
I downloaded 4pda_kernal.tar This helps in getting CWM
I downloaded Pits.zip from http://forum.xda-developers.com/member.php?u=3597010
in download mode I connected my mobile to my laptop and with ODIN 1.85V I selected c:\Downloads\pit\Q1_20110914_16GB-patched.pit as my PIT file
and for PDA file I selected \N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
which I downloaded from http://forum.xda-developers.com/showthread.php?t=1424997
then press Start button.
Miracle went (I did not even format after partition) I hope it is included in the PIT file. HG42 has to clarify it
Then it went to reboot and was stuck at Samsung logo
I even got on message saying Samsung Encryption fail error and asked to reboot
when I pressed OK it rebooted and was Stuck at Glowing Samsung.
I once again reboot with pressing Power button.
this time it went through all the setting and it is done.
Now I have lost only 8GB with the process
I hope down the time there will be a guide to even remove the bad sectors or blocks.
If it fails in this PIT file try with other PIT files that HG 42 has provided.
Thats It.
Great
Once again I thank HG42 for all his hard work and support.
+1 now on ics lpy rooted via speedmod kernel & s3 mods touchwiz 5. Loving it so far...though i do get the occasional hiccup and phone freezes requiring battery removal.
Sent from my GT-N7000 using xda premium
Thanks a ton.. i just followed this guide and i am back from super brick of my 16GB note.. thanks again for posting this... you are just awesome.
prakashraobs said:
Dear Super brick user
First I would like to Thank HG 42 for his Support on super Brick
1. I followed the Thread http://forum.xda-developers.com/member.php?u=3597010
and http://forum.xda-developers.com/member.php?u=3597010
I downloaded 4pda_kernal.tar This helps in getting CWM
I downloaded Pits.zip from http://forum.xda-developers.com/member.php?u=3597010
in download mode I connected my mobile to my laptop and with ODIN 1.85V I selected c:\Downloads\pit\Q1_20110914_16GB-patched.pit as my PIT file
and for PDA file I selected \N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
which I downloaded from http://forum.xda-developers.com/showthread.php?t=1424997
then press Start button.
Miracle went (I did not even format after partition) I hope it is included in the PIT file. HG42 has to clarify it
Then it went to reboot and was stuck at Samsung logo
I even got on message saying Samsung Encryption fail error and asked to reboot
when I pressed OK it rebooted and was Stuck at Glowing Samsung.
I once again reboot with pressing Power button.
this time it went through all the setting and it is done.
Now I have lost only 8GB with the process
I hope down the time there will be a guide to even remove the bad sectors or blocks.
If it fails in this PIT file try with other PIT files that HG 42 has provided.
Thats It.
Great
Once again I thank HG42 for all his hard work and support.
Click to expand...
Click to collapse
Thank you!
One of these Success stories with a guide should go Sticky.
sharan.mu said:
Thanks a ton.. i just followed this guide and i am back from super brick of my 16GB note.. thanks again for posting this... you are just awesome.
Click to expand...
Click to collapse
Not 16GB Note anymore I guess ?
Im confused i thought a superbrick ment the phone wouldnt do anything no download mode no recovery wont switch on, so how isit possible to flash that tar file if you cant get into recovery or download mode If it works thats great news but yeah like i said im confused lol.
GEX THE GECKO said:
Im confused i thought a superbrick ment the phone wouldnt do anything no download mode no recovery wont switch on, so how isit possible to flash that tar file if you cant get into recovery or download mode If it works thats great news but yeah like i said im confused lol.
Click to expand...
Click to collapse
I'm guessing super brick is some sort of corrupted file system, which will not allow the phone to boot, or allow you to flash anything to it. All the while still having access to download mode - a teaser so to speak.
Hardbrick is eMMC damage = paperweight.
prakashraobs said:
Dear Super brick user
First I would like to Thank HG 42 for his Support on super Brick
1. I followed the Thread http://forum.xda-developers.com/member.php?u=3597010
and http://forum.xda-developers.com/member.php?u=3597010
I downloaded 4pda_kernal.tar This helps in getting CWM
I downloaded Pits.zip from http://forum.xda-developers.com/member.php?u=3597010
in download mode I connected my mobile to my laptop and with ODIN 1.85V I selected c:\Downloads\pit\Q1_20110914_16GB-patched.pit as my PIT file
and for PDA file I selected \N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
which I downloaded from http://forum.xda-developers.com/showthread.php?t=1424997
then press Start button.
Miracle went (I did not even format after partition) I hope it is included in the PIT file. HG42 has to clarify it
Then it went to reboot and was stuck at Samsung logo
I even got on message saying Samsung Encryption fail error and asked to reboot
when I pressed OK it rebooted and was Stuck at Glowing Samsung.
I once again reboot with pressing Power button.
this time it went through all the setting and it is done.
Now I have lost only 8GB with the process
I hope down the time there will be a guide to even remove the bad sectors or blocks.
If it fails in this PIT file try with other PIT files that HG 42 has provided.
Thats It.
Great
Once again I thank HG42 for all his hard work and support.
Click to expand...
Click to collapse
Even though i had lost 5Gb in the process! A week ago i was able to revive my Note to it's full potencial!
But losing 5Gb in 11.2Gb that you can use it's a lot to me because about a week ago i had my SGS2 and i used it to make calls.. and i was using my Note just as a multimedia player and internet browser mostly and no calls or sms because it was SIMless!
Anyway what i agreed with my GF is that i would take my Note to samsung to see if they could replace the motherboard for free since i have warranty for my phone and yes.. in a week i'll have my Phone back with a new motherboard completly for free!
My advice:
If you have warranty, get rid of the binary counter with the jig following this tutorial:
[REF] How to remove yellow triangle on any firmware with JIG
And flash a stock kernel from:
[KERNEL] Stock Kernel for N7000
I've done this and it was accepted as having warranty on Samsung Services
hi
my phone stucked while flashing cm9 rom.
now i can not open it in download or recovery mode. it woudnt do anything. so is this superbrick or hardbrick?
to solve this problem i have to change mainboard only ?
quarkw said:
hi
my phone stucked while flashing cm9 rom.
now i can not open it in download or recovery mode. it woudnt do anything. so is this superbrick or hardbrick?
to solve this problem i have to change mainboard only ?
Click to expand...
Click to collapse
This is what happened to me too.
How did you super brick your note?
prakashraobs said:
Dear Super brick user
First I would like to Thank HG 42 for his Support on super Brick
1. I followed the Thread http://forum.xda-developers.com/member.php?u=3597010
and http://forum.xda-developers.com/member.php?u=3597010
I downloaded 4pda_kernal.tar This helps in getting CWM
I downloaded Pits.zip from http://forum.xda-developers.com/member.php?u=3597010
in download mode I connected my mobile to my laptop and with ODIN 1.85V I selected c:\Downloads\pit\Q1_20110914_16GB-patched.pit as my PIT file
and for PDA file I selected \N7000XXLPY_N7000OXALPY_N7000XXLPT_HOME.tar.md5
which I downloaded from http://forum.xda-developers.com/showthread.php?t=1424997
then press Start button.
Miracle went (I did not even format after partition) I hope it is included in the PIT file. HG42 has to clarify it
Then it went to reboot and was stuck at Samsung logo
I even got on message saying Samsung Encryption fail error and asked to reboot
when I pressed OK it rebooted and was Stuck at Glowing Samsung.
I once again reboot with pressing Power button.
this time it went through all the setting and it is done.
Now I have lost only 8GB with the process
I hope down the time there will be a guide to even remove the bad sectors or blocks.
If it fails in this PIT file try with other PIT files that HG 42 has provided.
Thats It.
Great
Once again I thank HG42 for all his hard work and support.
Click to expand...
Click to collapse
Did you super brick your note after doing a full wipe?
I think the same thing has happened to me .. i can flash rom and all but no matter how many roms i try flashing i am stuck at the samsung logo!
You lost 8 gb.. does it mean you have only 3GB left??
can I ask....how are you able to determine how much space/storage you lost? Just curious.....
After re-boot, I checked in Setting> Storage
it shows now as Internal Memory 2GB, USB Storage as 8.24GB and SD Card as 25.89 GB (I dont know how even I have lost another 4 GB in SD Card also). Even After formating SD Card it formats only to 25.89 GB instead of 32 GB or 29.4 GB.
How to do this when the phone doe not boot at all, not even download mode.
You can't unfortunately.
I try to understand if this is the solution to this:
http://forum.xda-developers.com/showthread.php?t=1671712
My phone is superbricked for 3 weeks now...
asafki said:
I try to understand if this is the solution to this:
http://forum.xda-developers.com/showthread.php?t=1671712
My phone is superbricked for 3 weeks now...
Click to expand...
Click to collapse
It looks like you have a case of super-brick with some faulty partition.
If you can get help from SS service you should go there. Otherwise, The re-partition guide below can help, although you will loose some storage space. Use custom PIT file method or manual.
http://forum.xda-developers.com/showthread.php?t=1661590
Hope it helps,
Thanks! about to take it from the store where they told me they cannot fix it, and try for myself!
crossing fingers..
I can't thank you enough!!
3 weeks spent at the store, and now, 15 minutes of work and it back to life!!!
Thanks a lot!!!!
asafki said:
I can't thank you enough!!
3 weeks spent at the store, and now, 15 minutes of work and it back to life!!!
Thanks a lot!!!!
Click to expand...
Click to collapse
Wow. Good to hear that. Feel free to press some thanks to me . Thanks.
If ypu have warranty like me your lucky! I already brought my Note at service center they change my Motherboard without payment because of warranty. Just dont say you used ODIN it will void your warranty. I have 2 counts binaries in Note when i brought it to Service Center.
Sent from my GT-N7000 using Tapatalk 2

[Q] My Ace gets an error while switching on!!! HELP

My galaxy ace was from Dubai having an arabian firmware, I went through a wrong root but nothing happened to the phone, Later while installing my backup(stock) rom and factory resetting, the phone would not switch on but restarted every time it reached samsung logo preview....
While trying to fix it, It got worse as my phone would switch on having a small Mobile logo and a computer logo with a cross sign in yellow b/w them! It does not go into recovery but just in download mode.....however i tried flashing it but the flashing stucks at Setup connection in ODIN.....!?
Also my download mode is without any yellow picture but just written DOWNLOADING
I dont have that much money to give it to service centre! HELP!!!
.....!???
Check your drivers first...If you dont have Kies,install it...Then try to flash stock via Odin,but you must turn off Kies..
re-download firmware ... make sure ace is recognized ... flash the firmware the correct way
one packace and right ops ... and you're out!
and by the way ... you were in a simple fix bootloop ... next time just erase data ... and you'll be out of it!
Something still confuses me!
SnowPluralism said:
re-download firmware ... make sure ace is recognized ... flash the firmware the correct way
one packace and right ops ... and you're out!
and by the way ... you were in a simple fix bootloop ... next time just erase data ... and you'll be out of it!
Click to expand...
Click to collapse
But what does this sign means when i turn on my ace Mobile and a computer having a yellow cross b/w them!
and whats the reason for odin to stuck at Setup Connection, is kies responsible for this!?
saadistan said:
But what does this sign means when i turn on my ace Mobile and a computer having a yellow cross b/w them!
and whats the reason for odin to stuck at Setup Connection, is kies responsible for this!?
Click to expand...
Click to collapse
That flash was not sucssessfull and system is empty
Sent from my GT-S5830 using xda app-developers app
SnowPluralism said:
That flash was not sucssessfull and system is empty
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
@ OP : This might happen when you have unplugged your device when in the midst of flashing via Odin. A fresh flash via Odin should fix everything.
Sent from my GT-S5830 using xda premium

[HELP] Can't unbrick my i9001

Hi everybody !
Yesterday, I swapped the sd cards of my gs+ but the phone didn't boot and stayed at the boot animation (CM10.1). So, I tried to restock it but Odin stayed at the AMSS download. I tried to install many other stock ROM but it was stuck at this thread. Today, I retry to flash CWM recovery and stock ROM but now it block at setup connection. I don't know why because I put the ariesve.ops file in the good section.
I have already bricked my phone many times but the restock worked fine.
What can I do ? Please help me I love my I9001 ! :crying:
Thanks a lot for your answers !
TomTheFrench said:
Hi everybody !
Yesterday, I swapped the sd cards of my gs+ but the phone didn't boot and stayed at the boot animation (CM10.1). So, I tried to restock it but Odin stayed at the AMSS download. I tried to install many other stock ROM but it was stuck at this thread. Today, I retry to flash CWM recovery and stock ROM but now it block at setup connection. I don't know why because I put the ariesve.ops file in the good section.
I have already bricked my phone many times but the restock worked fine.
What can I do ? Please help me I love my I9001 ! :crying:
Thanks a lot for your answers !
Click to expand...
Click to collapse
The best solutions is to go to a Samsung Service. I had bricked my phone to and i paid 100 $ and they changed my motherboard. Or go to a professional service.
blackbunny96 said:
The best solutions is to go to a Samsung Service. I had bricked my phone to and i paid 100 $ and they changed my motherboard. Or go to a professional service.
Click to expand...
Click to collapse
I like my S+ but I don't want to pay 100$ for a thing I think I can do by myself ^^
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
jabrif said:
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Downloading ...
do not worry is happening for me everytime i want to flash the stock firmware.. just change the USB port power off the phone then put it in downloading mode and try again till you succeed
TheRippaG said:
do not worry is happening for me everytime i want to flash the stock firmware.. just change the USB port power off the phone then put it in downloading mode and try again till you succeed
Click to expand...
Click to collapse
Thank you a lot for your answer I hope it will work
TomTheFrench said:
I like my S+ but I don't want to pay 100$ for a thing I think I can do by myself ^^
Click to expand...
Click to collapse
My phone didn't boot to download mode or recovery mode , i trieed with a JIG but it didn't boot to download mode. That's why I payed 100$. Can you boot to download mode?
jabrif said:
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
WORKS ! :victory:
blackbunny96 said:
My phone didn't boot to download mode or recovery mode , i trieed with a JIG but it didn't boot to download mode. That's why I payed 100$. Can you boot to download mode?
Click to expand...
Click to collapse
Yes I can boot into download mod that's I thought there is an issue
TomTheFrench said:
WORKS ! :victory:
Click to expand...
Click to collapse
:thumbup:
Sent from my GT-I9001 using xda app-developers app
The problem you had was caused by ODIN. I've had it to. You have to use a specific version of ODIN and that version is the one you finde in the recovery package you've just used. So beware in the future!
Sent from my GT-I9001 using Tapatalk 2
silviu_iliescu said:
The problem you had was caused by ODIN. I've had it to. You have to use a specific version of ODIN and that version is the one you finde in the recovery package you've just used. So beware in the future!
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
I tried with 3 versions of Odin but now I'm glad it is working fine
From now on you can use this http://easyandroidsolutions.blogspot.ro/2012/10/recover-samsung-galaxy-s-plus-i9001.html
It is very important to use correct version of ODIN, happened to me too with my first flashing
Questions belong in the Q&A and Help section -- Refer to this thread
Please read the XDA forum rules before posting
Thank you for your cooperation
Thread moved
Towle
XDA Moderator
Hello !! need help its so important to me :/
i think i have the same you had
and i even tried worked2 but when it rebooting in Odin it stuck in the logo of CM 10 after rebooting and don't go to recovery mode
but i still can see my download mode and i think the CWM is not exist now
.NetDeveloper said:
i think i have the same you had
and i even tried worked2 but when it rebooting in Odin it stuck in the logo of CM 10 after rebooting and don't go to recovery mode
but i still can see my download mode and i think the CWM is not exist now
Click to expand...
Click to collapse
If you successfully flashed cwm via odin. switch off the phone. take out the battery and insert it back.
Connect your data cable to your phone(not to pc). Then press and hold volume up button and switch on the phone. When the samsung logo appears leave the button. When Samsung galaxy s plus logo appears, just tap the menu button(left touch button). You will get in to the CWM recovery. Then wipe data, wipe cache, wipe dalvic cache (in advanced menu). Then flash a new rom.

[Q] Ultimate brick

I rooted my sgs 3 mini and install custom ROMs. I loaded CM 11 (4.4.2 kitkat) from Maclaw.pl. It worked, but after few weeks, my fhone just suddenly shut down. Tried to unroot it via odin + stock ROM, but nothing happens. Or something happens, there is the samsungs own bootlogo back. But the phone is stuck on that logo. Funny part is that when I put a charger on, there appears maclaws panda charging logo. I tried to load stock charging logo via odin, but nothing happens. Phone won't get to recovery mode, but the download mode works. Any ideas what to do? Except to throw it to trash can...
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
oldmen said:
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Won't go to recovery, have tried few weeks now. Download work, when tried to go recovery, it just showing the samsungs bootlogo
And yes tried flash stock ROM by odin plenty times.
Problems
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
blodrayn said:
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
Click to expand...
Click to collapse
Sad to hear :/ Hope someone can help us
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
oldmen said:
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Staattius said:
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Click to expand...
Click to collapse
It could be something with a corrupt param or something. Have you tried the service firmware also, not just the stock firmware?
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
deconectat said:
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
Click to expand...
Click to collapse
Tried, didn't work. Thanks for trying to help
You kan fix your phone like this
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
joker79 said:
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
Click to expand...
Click to collapse
Your pit-file have password protection?
Filpus said:
Your pit-file have password protection?
Click to expand...
Click to collapse
No
joker79 said:
No
Click to expand...
Click to collapse
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Try Now
Filpus said:
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Click to expand...
Click to collapse
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
joker79 said:
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
Click to expand...
Click to collapse
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Filpus said:
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Click to expand...
Click to collapse
You tick the box "re-partition" on odin ?
joker79 said:
You tick the box "re-partition" on odin ?
Click to expand...
Click to collapse
yep
Joker, have you found solution of this issue?
I have the same problem, also tried lot of thighs but nothing helped. Every try of using pit end-up with message "there is no pit partition", but stock FW I can falsh with no troubles.
Still the same behaviour only logo after staring phone and cannot get into recovery menu...

Categories

Resources