Hi everybody !
Yesterday, I swapped the sd cards of my gs+ but the phone didn't boot and stayed at the boot animation (CM10.1). So, I tried to restock it but Odin stayed at the AMSS download. I tried to install many other stock ROM but it was stuck at this thread. Today, I retry to flash CWM recovery and stock ROM but now it block at setup connection. I don't know why because I put the ariesve.ops file in the good section.
I have already bricked my phone many times but the restock worked fine.
What can I do ? Please help me I love my I9001 ! :crying:
Thanks a lot for your answers !
TomTheFrench said:
Hi everybody !
Yesterday, I swapped the sd cards of my gs+ but the phone didn't boot and stayed at the boot animation (CM10.1). So, I tried to restock it but Odin stayed at the AMSS download. I tried to install many other stock ROM but it was stuck at this thread. Today, I retry to flash CWM recovery and stock ROM but now it block at setup connection. I don't know why because I put the ariesve.ops file in the good section.
I have already bricked my phone many times but the restock worked fine.
What can I do ? Please help me I love my I9001 ! :crying:
Thanks a lot for your answers !
Click to expand...
Click to collapse
The best solutions is to go to a Samsung Service. I had bricked my phone to and i paid 100 $ and they changed my motherboard. Or go to a professional service.
blackbunny96 said:
The best solutions is to go to a Samsung Service. I had bricked my phone to and i paid 100 $ and they changed my motherboard. Or go to a professional service.
Click to expand...
Click to collapse
I like my S+ but I don't want to pay 100$ for a thing I think I can do by myself ^^
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
jabrif said:
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Downloading ...
do not worry is happening for me everytime i want to flash the stock firmware.. just change the USB port power off the phone then put it in downloading mode and try again till you succeed
TheRippaG said:
do not worry is happening for me everytime i want to flash the stock firmware.. just change the USB port power off the phone then put it in downloading mode and try again till you succeed
Click to expand...
Click to collapse
Thank you a lot for your answer I hope it will work
TomTheFrench said:
I like my S+ but I don't want to pay 100$ for a thing I think I can do by myself ^^
Click to expand...
Click to collapse
My phone didn't boot to download mode or recovery mode , i trieed with a JIG but it didn't boot to download mode. That's why I payed 100$. Can you boot to download mode?
jabrif said:
Have you tried with worked2.rar??
It helped me many times.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
WORKS ! :victory:
blackbunny96 said:
My phone didn't boot to download mode or recovery mode , i trieed with a JIG but it didn't boot to download mode. That's why I payed 100$. Can you boot to download mode?
Click to expand...
Click to collapse
Yes I can boot into download mod that's I thought there is an issue
TomTheFrench said:
WORKS ! :victory:
Click to expand...
Click to collapse
:thumbup:
Sent from my GT-I9001 using xda app-developers app
The problem you had was caused by ODIN. I've had it to. You have to use a specific version of ODIN and that version is the one you finde in the recovery package you've just used. So beware in the future!
Sent from my GT-I9001 using Tapatalk 2
silviu_iliescu said:
The problem you had was caused by ODIN. I've had it to. You have to use a specific version of ODIN and that version is the one you finde in the recovery package you've just used. So beware in the future!
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
I tried with 3 versions of Odin but now I'm glad it is working fine
From now on you can use this http://easyandroidsolutions.blogspot.ro/2012/10/recover-samsung-galaxy-s-plus-i9001.html
It is very important to use correct version of ODIN, happened to me too with my first flashing
Questions belong in the Q&A and Help section -- Refer to this thread
Please read the XDA forum rules before posting
Thank you for your cooperation
Thread moved
Towle
XDA Moderator
Hello !! need help its so important to me :/
i think i have the same you had
and i even tried worked2 but when it rebooting in Odin it stuck in the logo of CM 10 after rebooting and don't go to recovery mode
but i still can see my download mode and i think the CWM is not exist now
.NetDeveloper said:
i think i have the same you had
and i even tried worked2 but when it rebooting in Odin it stuck in the logo of CM 10 after rebooting and don't go to recovery mode
but i still can see my download mode and i think the CWM is not exist now
Click to expand...
Click to collapse
If you successfully flashed cwm via odin. switch off the phone. take out the battery and insert it back.
Connect your data cable to your phone(not to pc). Then press and hold volume up button and switch on the phone. When the samsung logo appears leave the button. When Samsung galaxy s plus logo appears, just tap the menu button(left touch button). You will get in to the CWM recovery. Then wipe data, wipe cache, wipe dalvic cache (in advanced menu). Then flash a new rom.
Related
Hi to everyone.:
I'm from Chile and i have an SAMSUNG GALAXY ACE, model M.
The last night, i install the GREAT Kernel of Mr.Baugis, but i have a BIG PROBLEM.!
I don't now my brother did, but I think it went to recovery mode and made some adjustments(tried to install an android, I think) and restart the phone.I turn on, says the phone model and not pass the screen "Rafael.Baugis Kernel" I have waited up to 10 minutes to do something but nothing.
Really, i need help. I love this cellphone and i need it to work
PS: if the issue is not going here, Move it please
PS2: Sorry for the bad english
Did you try clear data/factory reset and clear the dalvik cache? If you did and still end up in a bootloop, flash a new rom. If that did not work too, flash the default stock firmware through Odin. Hope it helped
This is sent from the moon using a 100gbps connection
Thnaks, but it doesn't work
my pc don't recognize ODIN, but i have all the controlators and the KIES of samsung
CsmDarren said:
Did you try clear data/factory reset and clear the dalvik cache? If you did and still end up in a bootloop, flash a new rom. If that did not work too, flash the default stock firmware through Odin. Hope it helped
This is sent from the moon using a 100gbps connection
Click to expand...
Click to collapse
lalobad said:
Thnaks, but it doesn't work
my pc don't recognize ODIN, but i have all the controlators and the KIES of samsung
Click to expand...
Click to collapse
If you are able to get your phone in download mode (volume up + volume down + power) then simply follow any guide from this section explaining how to flash multipackage stock firmware. If ur phone is not getting detected in odin, that is also explained in multiple threads here. As long as u can get the phone in download mode, you should be able to fix the problem. Let me know if u still need exact directions
Sent from my GT-S5660 using xda app-developers app
I had the same problem like you have.
At first you must uninstall Samsung Kies and install these http://www.mediafire.com/?n412p5v6golq4sn official USB-Driver from Samsung.
Start Odin 1.85 and Run it as Admin if you have Win7. Connect your Ace and check if your device get displayed in Odin.
Then go into the download mode and flash your firmware.
If you can't get into the Download Mode you must buy a USB-Jig from Amazon or wherever.
thanks
JB|Fabo said:
I had the same problem like you have.
At first you must uninstall Samsung Kies and install these[EDITED LINK]official USB-Driver from Samsung.
Start Odin 1.85 and Run it as Admin if you have Win7. Connect your Ace and check if your device get displayed in Odin.
Then go into the download mode and flash your firmware.
If you can't get into the Download Mode you must buy a USB-Jig from Amazon or wherever.
Click to expand...
Click to collapse
saeed14i said:
If you are able to get your phone in download mode (volume up + volume down + power) then simply follow any guide from this section explaining how to flash multipackage stock firmware. If ur phone is not getting detected in odin, that is also explained in multiple threads here. As long as u can get the phone in download mode, you should be able to fix the problem. Let me know if u still need exact directions
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Thanks guys, but i can resolve my problem:
i go to the support of my cellphone company (entel pcs chile) and they give me another galaxy ace TOTALLY NEW AND FREE
i'm so luck!
Thanks 4 the answers :victory::victory::victory::laugh::laugh:
lalobad said:
Thanks guys, but i can resolve my problem:
i go to the support of my cellphone company (entel pcs chile) and they give me another galaxy ace TOTALLY NEW AND FREE
i'm so luck!
Thanks 4 the answers :victory::victory::victory::laugh::laugh:
Click to expand...
Click to collapse
Congratulations
I am surprised, a company replacing a phone after it is rooted and flashed with a custom kernel
Amazing
You are truly very lucky
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Avikar said:
I need Help people, Understand my problem First,
1. I bought a new Samsung AT&T Captivate.
2. Upgraded to 2.3 Kies.
3. Used CornKernel_UCKK4_v705 to root my phone and flash CWM.
4. backed up my OS 2.3 using CWM,
5. Success fully installed STABLE CM 10.0.
6. Everything was great. Tried installing CM 10.1 and Gapps crashed everytime.
7. THEN i made the big Mistake, RESTORED 2.3 stock OS using CWM and it stuck at some point and battery drained.
8. Now my phone hangs at AT&T logo. and if try to enter download mode battery logo flashes.
9. I tried ODIN one click to unbrick to recover the stock OS and now i cant even get into DOWNLOAD mode.
Please Help friends i know u must have faced such situation, i NEED HELP. :crying:
Click to expand...
Click to collapse
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
n205des said:
Try holding volume up + volume down and then plug in the USB cord that is plugged into your PC. This should take you to download mode. If this doesn't help you will have to purchase a jig
Click to expand...
Click to collapse
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Avikar said:
Thanks for the quick reply,
Yeah i have ordered one, Jig is on the way but now what after coming to download mode? Odin disabled my download mode, What should i do now?
Click to expand...
Click to collapse
download this
http://www.mediafire.com/?sbjd049x4m36pb6
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Dude why the hell "junior" written under ur name, U RECOVERED MY PHONE.
n205des said:
download this
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
after downloading it run it as administrator
then connect the jig to the phone and then it will boot in download mode
then you caqn remove the jig and connect the usb cable to the pc
and you will see a yellow prompt like the one in odin..
and then click on start..
the stock rom flashing will start...
Click to expand...
Click to collapse
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Avikar said:
tHANKS to the brain who developed this resistor thing, My phone moved to Download mode and then thanks to the person who gave me the link in the above comment,,
But now i cant flash CWM I flashed it earlier without any problem but now i cant and seriously after using JB 4.1 GB seems very bad,
Any ways a great great thanks my phone is breathing because of u.. High Five
Click to expand...
Click to collapse
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
but how to boot into cwm??
n205des said:
it already has CWM in it as it does not have the stock kernel..
it is based on boog's KI1/KI2 Kernel
Click to expand...
Click to collapse
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Avikar,
This Stickied thread will prove helpful.... Captivate - PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SAMSUNG-SGH-I747 using xda premium
Avikar said:
I almost tried everything but can nt boot into cwm. what the combo for this kernel to boot into recovery?
Click to expand...
Click to collapse
volume+ volume- and power button is the combo for recovery..
Still not there.
n205des said:
volume+ volume- and power button is the combo for recovery..
Click to expand...
Click to collapse
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
^
The KK4 Corn Kernel will only boot up and run if u r on KK4 firmware or a Rom of that base...or previous stock firmware/roms.
Sent from my SGH-I777 using xda premium
Avikar said:
I have recovered from a soft brick using a jig, I know these shortcuts very well but none is working even to come into a download mode i always need a Jig it was all good when i installed cm 10.0 the second day i bought this phone but now after the attempt to restore into stock ROM was a mess, then thanks to u my phone got a life again, but now even the CornKernel_UCKK4_v705 isn,t working on my phone,
Any IDEAS???
Click to expand...
Click to collapse
it does not boot in recovery,right?
have you tried through rom manager??
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
^
Rom manager does not work well with the Captivate.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
but it can help by booting into recovery without the three button combo.
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Still nothing.
4-2ndtwin said:
Yes, to that. Thank u for clarifying. :thumbup:
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Avikar said:
1.KK4_Root_v1_1: Bricks my phone. Have to use Jig to come to download mode,
2.I897UCJF6-final-OCD-REV0: This is stock rom using odin, which also bricks my phone,
3.KI2_noBL_BoogsKernel: this wakes up my phone to GB stock Rom but no sign of booting into recovery, and my phone lost its root after installing it,
4.CornKernel_UCKK4_v705: successfully flashed using ODIN but still can not boot into recover.
Looks like I have to stick to Gingerbread for eternity and for more clarification,
Currently my has Firmware 2.3.5
Baseband I897UCKI2
Kernel 2.6.35.7-I897UCKI1- CL607313
Build: GINGERBREAD.UCKI2
Click to expand...
Click to collapse
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Avikar said:
Which one to try first?
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
try anything which you like
n205des said:
try flashing froyo or eclair
you can find these packages here
http://forum.xda-developers.com/showthread.php?t=1300843
Click to expand...
Click to collapse
As i mentioned stock rom 2.1 eclair from the same forum Bricks my phone,
Didnt try 2.2,
recently on the 2.3 from the same forum but no help...Instead of boot logo some white backgound with million colour dots appear and I can not
enter to recovery or download mode i have tried every thing,,,
Hi,
got a bit of an emergency here. Maybe someone got a useful hint for me?
I've been running X-Power 3.0 ROM with Perseus kernel 32.1 so far and just finished undervolting the kernel via SetCPU - ROM booted up fine afterwards.
But today I decided to give Perseus 33 a try, and after flashing the TAR with ODIN mobile my phone won't boot again - it shows the "Galaxy S III" screen, blanks the screen again and then restarts again - I can't get the phone into recovery or download mode
Any hints on how to solve this one?
try pulling the battery out and trying to get into download again. I'd that doesn't work, you have to get a usb jig, that has a small chance of working.
Glebun said:
try pulling the battery out and trying to get into download again. I'd that doesn't work, you have to get a usb jig, that has a small chance of working.
Click to expand...
Click to collapse
Thanks for helping. I somehow got into recovery in between, but I can't tell why - AFAIK I did it all the same way times and again before, but now I was able to restore a CWM backup :good:
Try using TWRP recovery:
http://goo.im/devs/OpenRecovery
Find you Model number...
I find its easiest.
Sent from my GT-I9305 using xda app-developers app
Pheoxy said:
Try using TWRP recovery:
http://goo.im/devs/OpenRecovery
Find you Model number...
I find its easiest.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
wouldn't have made a difference
Glebun said:
wouldn't have made a difference
Click to expand...
Click to collapse
I wasn't meaning the Bootloop, just the Recovery itself once it was fixed.
Saksham.Ar
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
saksham.2991 said:
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
Click to expand...
Click to collapse
One try a USB Recovery Jig
Two take to a service centre .
jje
saksham.2991 said:
I have the same problem posted in the OP.
i cant go to download mode or recovery mode.
Help!
Click to expand...
Click to collapse
read the thread before posting
5 steps
JJEgan said:
One try a USB Recovery Jig
Two take to a service centre .
jje
Click to expand...
Click to collapse
Hello,
I had the same problem with another device. What me helped was:
1. Using a USB-Jig - then Downloadmode went on on its own
2. Flasing CWM- Recovery (with Odin)
3. AFTER THAT put out Battery for some seconds (10s)
4. CWM- was accessible
5. deleting cache and dalvik, (and did a factory reset but think that wasn't the point),
and bootloop wad gone.
Hope that helped,
Quantenkosmos.
Thank you this thread is how many months old .
Hey guys I am using international Galaxy Note N7000.I switched from CM10.1 to official jelly bean 4.1 without wiping data and now that when the hold the power button I can hear the phone starting(sound) but I don't see any thing on the screen and even I see nothing when I hold hold the recovery mode keys,all I see is a black screen.Now my phone is bricked how can I unbrick?
Please help quickly.
Thank you!!
dont post double threads...
how did you flash jb?
If you know path to cm, why would unclean path back work?
Anyways, go check if you can go to download mode.
If you can, flash a wipe rom with pitfile from ketans sticky in development thread.
at own risk
baz77 said:
dont post double threads...
how did you flash jb?
If you know path to cm, why would unclean path back work?
Anyways, go check if you can go to download mode.
If you can, flash a wipe rom with pitfile from ketans sticky in development thread.
at own risk
Click to expand...
Click to collapse
I flashed it with Odin from download mode and no I am unable to go to downloade mode and how to flash with pitfile,please help me I am in huge trouble.
nsnarayan10 said:
I flashed it with Odin from download mode and no I am unable to go to downloade mode and how to flash with pitfile,please help me I am in huge trouble.
Click to expand...
Click to collapse
And the phone only vibrates but never turns on,somebody please help me
If there is no download mode or recovery mode then there is no way to revive the phone. On the other thread you mentioned that you flashed a S2 rom.
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
If there is no download mode or recovery mode then there is no way to revive the phone. On the other thread you mentioned that you flashed a S2 rom.
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
ouch that is a tough one, Try a search on jig. There might be a way but I have never tried.
Sent from my GT-N7000 using Tapatalk 2
hi, this morning I have tried to flash my galaxy s i9000 to a latest version of slim bean but when I start installing the rom I have seen that was not good and I have recover my old rom and reboot but unfortuntly some thing went wrong and when I come to reboot my phone stopped on the galaxy logo without rebooting or switch off .to be honest I make some thing more wrong I have switched of my phone,take off cd card and tried to put on another rom so can I instal again but now I have two problems because when I come to re mounted is teling me that it cant remount . can you please tell how much is bad the situation and what can I do to turn back to working my phone please?
First point, please post questions in the Q&A thread.
Secondly, can you get into download mode?
Sent from my GT-P7510 using Tapatalk HD
can you get into the recovery mode or download mode with 3 button combos. if you can you might be able to repair it.
samsung galaxy s i9000 problem after flash rom
Equinos said:
can you get into the recovery mode or download mode with 3 button combos. if you can you might be able to repair it.
Click to expand...
Click to collapse
thanks for replay me and sorry for the question here but I am new and a little bit hassled up about my phone.
yes I can go in download mode, waiting for your instractions and thanks ones again.
samsung galaxy s i9000 problem after flash rom
Soryuu said:
First point, please post questions in the Q&A thread.
Secondly, can you get into download mode?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
sorry for my question here I am relay sorry but I am new here and I am in a hessil about my phone:crying:
noelcarlos said:
thanks for replay me and sorry for the question here but I am new and a little bit hassled up about my phone.
yes I can go in download mode, waiting for your instractions and thanks ones again.
Click to expand...
Click to collapse
Mate, calm down, you can get into download mode- everything is okay
All you need to do is reflash a stock 2.3.6 rom and see if that solves your problems.
Sent from my GT-P7510 using Tapatalk HD
samsung galaxy si900 problem after flash rom
Soryuu said:
Mate, calm down, you can get into download mode- everything is okay
All you need to do is reflash a stock 2.3.6 rom and see if that solves your problems.
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Yes ok but In which manner because when I am try to access cd card is telling me that it cant open it and I have try with another cd card and every time I am reciving the same error it'cant open it;cant access. can you please give me another way can access through download mode by pc or so?
thank ones again
samsung galaxy si900 problem after flash rom
noelcarlos said:
Yes ok but In which manner because when I am try to access cd card is telling me that it cant open it and I have try with another cd card and every time I am reciving the same error it'cant open it;cant access. can you please give me another way can access through download mode by pc or so?
thank ones again
Click to expand...
Click to collapse
thanks very very much i have resolve my problem